man/man4/uart.4

.\"
.\" Copyright (c) 2003 Marcel Moolenaar
.\" All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\"
.\" 1. Redistributions of source code must retain the above copyright
.\"    notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\"    notice, this list of conditions and the following disclaimer in the
.\"    documentation and/or other materials provided with the distribution.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
.\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
.\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
.\" IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
.\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
.\" NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
.\" DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
.\" THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
.\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
.\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
.\"
.\" $FreeBSD$
.\"
.Dd December 9, 2015
.Dt UART 4
.Os
.Sh NAME
.Nm uart
.Nd driver for Universal Asynchronous Receiver/Transmitter (UART) devices
.Sh SYNOPSIS
.Cd "device uart"
.Pp
.Cd "device puc"
.Cd "device uart"
.Pp
.Cd "device scc"
.Cd "device uart"
.Pp
In
.Pa /boot/device.hints :
.Cd hint.uart.0.disabled="1"
.Cd hint.uart.0.baud="38400"
.Cd hint.uart.0.port="0x3f8"
.Cd hint.uart.0.flags="0x10"
.Pp
With
.Ar flags
encoded as:
.Bl -tag -compact -width 0x000000
.It 0x00010
device is potential system console
.It 0x00080
use this port for remote kernel debugging
.It 0x00100
set RX FIFO trigger level to ``low'' (NS8250 only)
.It 0x00200
set RX FIFO trigger level to ``medium low'' (NS8250 only)
.It 0x00400
set RX FIFO trigger level to ``medium high'' (default, NS8250 only)
.It 0x00800
set RX FIFO trigger level to ``high'' (NS8250 only)
.El
.\"
.Sh DESCRIPTION
The
.Nm
device driver provides support for various classes of UARTs implementing the
EIA RS-232C (CCITT V.24) serial communications interface.
Each such interface is controlled by a separate and independent instance of
the
.Nm
driver.
The primary support for devices that contain multiple serial interfaces or
that contain other functionality besides one or more serial interfaces is
provided by the
.Xr puc 4 ,
or
.Xr scc 4
device drivers.
However, the serial interfaces of those devices that are managed by the
.Xr puc 4 ,
or
.Xr scc 4
driver are each independently controlled by the
.Nm
driver.
As such, the
.Xr puc 4 ,
or
.Xr scc 4
driver provides umbrella functionality for the
.Nm
driver and hides the complexities that are inherent when elementary components
are packaged together.
.Pp
The
.Nm
driver has a modular design to allow it to be used on differing hardware and
for various purposes.
In the following sections the components are discussed in detail.
Options are described in the section that covers the component to which each
option applies.
.\"
.Ss CORE COMPONENT
At the heart of the
.Nm
driver is the core component.
It contains the bus attachments and the low-level interrupt handler.
.\"
.Ss HARDWARE DRIVERS
The core component and the kernel interfaces talk to the hardware through the
hardware interface.
This interface serves as an abstraction of the hardware and allows varying
UARTs to be used for serial communications.
.\"
.Ss SYSTEM DEVICES
System devices are UARTs that have a special purpose by way of hardware
design or software setup.
For example, Sun UltraSparc machines use UARTs as their keyboard interface.
Such an UART cannot be used for general purpose communications.
Likewise, when the kernel is configured for a serial console, the
corresponding UART will in turn be a system device so that the kernel can
output boot messages early on in the boot process.
.\"
.Ss KERNEL INTERFACES
The last but not least of the components is the kernel interface.
This component ultimately determines how the UART is made visible to the
kernel in particular and to users in general.
The default kernel interface is the TTY interface.
This allows the UART to be used for terminals, modems and serial line IP
applications.
System devices, with the notable exception of serial consoles, generally
have specialized kernel interfaces.
.\"
.Sh HARDWARE
The
.Nm
driver supports the following classes of UARTs:
.Pp
.Bl -bullet -compact
.It
NS8250: standard hardware based on the 8250, 16450, 16550, 16650, 16750 or
the 16950 UARTs.
.It
SCC: serial communications controllers supported by the
.Xr scc 4
device driver.
.El
.\"
.Sh Pulse Per Second (PPS) Timing Interface
The
.Nm
driver can capture PPS timing information as defined in RFC 2783.
The API, accessed via
.Xr ioctl 8 ,
is available on the tty device.
To use the PPS capture feature with
.Xr ntpd 8 ,
symlink the tty callout device
.Va /dev/cuau?
to
.Va /dev/pps0.
.Pp
The
.Va hw.uart.pps_mode
tunable configures the PPS capture mode for all uart devices;
it can be set in
.Xr loader.conf 5 .
The
.Va dev.uart.0.pps_mode
sysctl configures the PPS capture mode for a specific uart device;
it can be set in
.Xr loader.conf 5
or
.Xr sysctl.conf 5 .
.Pp
The following capture modes are available:
.Bl -tag -compact -offset "mmmm" -width "mmmm"
.It 0x00
Capture disabled.
.It 0x01
Capture pulses on the CTS line.
.It 0x02
Capture pulses on the DCD line.
.El
.Pp
The following values may be ORed with the capture mode to configure
capture processing options:
.Bl -tag -compact -offset "mmmm" -width "mmmm"
.It 0x10
Invert the pulse (RS-232 logic low = ASSERT, high = CLEAR).
.It 0x20
Attempt to capture narrow pulses.
.El
.Pp
Add the narrow pulse option when the incoming PPS pulse width is small
enough to prevent reliable capture in normal mode.
In narrow mode the driver uses the hardware's ability to latch a line
state change; not all hardware has this capability.
The hardware latch provides a reliable indication that a pulse occurred,
but prevents distinguishing between the CLEAR and ASSERT edges of the pulse.
For each detected pulse, the driver synthesizes both an ASSERT and a CLEAR
event, using the same timestamp for each.
To prevent spurious events when the hardware is intermittently able to
see both edges of a pulse, the driver will not generate a new pair of
events within a half second of the prior pair.
Both normal and narrow pulse modes work with
.Xr ntpd 8 .
.Pp
Add the invert option when the connection to the uart device uses TTL
level signals, or when the PPS source emits inverted pulses.
RFC 2783 defines an ASSERT event as a higher-voltage line level, and a CLEAR
event as a lower-voltage line level, in the context of the RS-232 protocol.
The modem control signals on a TTL-level connection are typically
inverted from the RS-232 levels.
For example, carrier presence is indicated by a high signal on an RS-232
DCD line, and by a low signal on a TTL DCD line.
This is due to the use of inverting line driver buffers to convert between
TTL and RS-232 line levels in most hardware designs.
Generally speaking, a connection to a DB-9 style connector is an RS-232
level signal at up to 12 volts.
A connection to header pins or an edge-connector on an embedded board
is typically a TTL signal at 3.3 or 5 volts.
.Sh FILES
.Bl -tag -width ".Pa /dev/ttyu?.init" -compact
.It Pa /dev/ttyu?
for callin ports
.It Pa /dev/ttyu?.init
.It Pa /dev/ttyu?.lock
corresponding callin initial-state and lock-state devices
.Pp
.It Pa /dev/cuau?
for callout ports
.It Pa /dev/cuau?.init
.It Pa /dev/cuau?.lock
corresponding callout initial-state and lock-state devices
.El
.Sh SEE ALSO
.Xr puc 4 ,
.Xr scc 4
.\"
.Sh HISTORY
The
.Nm
device driver first appeared in
.Fx 5.2 .
.Sh AUTHORS
The
.Nm
device driver and this manual page were written by
.An Marcel Moolenaar Aq Mt marcel@xcllnt.net .