1.\" 2.\" Copyright (c) 2005-2007 3.\" Damien Bergamini <damien.bergamini@free.fr> 4.\" 5.\" Permission to use, copy, modify, and distribute this software for any 6.\" purpose with or without fee is hereby granted, provided that the above 7.\" copyright notice and this permission notice appear in all copies. 8.\" 9.\" THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 10.\" WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 11.\" MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 12.\" ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 13.\" WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 14.\" ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 15.\" OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 16.\" 17.\" $FreeBSD$ 18.\" 19.Dd April 13, 2008 20.Dt RUM 4 21.Os 22.Sh NAME 23.Nm rum 24.Nd Ralink Technology USB IEEE 802.11a/b/g wireless network device 25.Sh SYNOPSIS 26To compile this driver into the kernel, 27place the following lines in your 28kernel configuration file: 29.Bd -ragged -offset indent 30.Cd "device ehci" 31.Cd "device uhci" 32.Cd "device ohci" 33.Cd "device usb" 34.Cd "device rum" 35.Cd "device wlan" 36.Cd "device wlan_amrr" 37.Ed 38.Pp 39Alternatively, to load the driver as a 40module at boot time, place the following line in 41.Xr loader.conf 5 : 42.Bd -literal -offset indent 43if_rum_load="YES" 44.Ed 45.Sh DESCRIPTION 46The 47.Nm 48driver supports USB 2.0 and PCI Express Mini Card wireless adapters 49based on the Ralink RT2501USB and RT2601USB chipsets. 50.Pp 51Ralink PCI Express Mini Card adapters show up as normal USB 2.0 52devices and are thus handled by the 53.Nm 54driver. 55.Pp 56The RT2501USB chipset is the second generation of 802.11a/b/g adapters from 57Ralink. 58It consists of two integrated chips, an RT2571W MAC/BBP and an RT2528 or 59RT5226 radio transceiver. 60.Pp 61The RT2601USB chipset consists of two integrated chips, an RT2671 62MAC/BBP and an RT2527 or RT5225 radio transceiver. 63This chipset uses the MIMO (multiple-input multiple-output) technology 64with multiple antennas to extend the operating range of the adapter 65and to achieve higher throughput. 66.Pp 67.Nm 68supports 69.Cm station , 70.Cm adhoc , 71.Cm hostap , 72and 73.Cm monitor 74mode operation. 75Only one virtual interface may be configured at any time. 76For more information on configuring this device, see 77.Xr ifconfig 8 . 78.Sh HARDWARE 79The 80.Nm 81driver supports USB 2.0 wireless 82adapters based on the Ralink RT2501USB and RT2601USB chipsets, 83including: 84.Pp 85.Bl -column -compact "Atlantis Land A02-PCM-W54" "Bus" 86.It Em Card Ta Em Bus 87.It "3Com Aolynk WUB320g" Ta USB 88.It "Abocom WUG2700 Ta" Ta USB 89.It "Airlink101 AWLL5025" Ta USB 90.It "ASUS WL-167g ver 2" Ta USB 91.It "Belkin F5D7050 ver 3" Ta USB 92.It "Belkin F5D9050 ver 3" Ta USB 93.It "Buffalo WLI-U2-SG54HP" Ta USB 94.It "Buffalo WLI-U2-SG54HG" Ta USB 95.It "Buffalo WLI-U2-G54HP" Ta USB 96.It "Buffalo WLI-UC-G" Ta USB 97.It "CNet CWD-854 ver F" Ta USB 98.It "Conceptronic C54RU ver 2" Ta USB 99.It "Corega CG-WLUSB2GO" Ta USB 100.It "D-Link DWA-110" Ta USB 101.It "D-Link DWA-111" Ta USB 102.It "D-Link DWL-G122 rev C1" Ta USB 103.It "D-Link WUA-1340" Ta USB 104.It "Digitus DN-7003GR" Ta USB 105.It "Edimax EW-7318USG" Ta USB 106.It "Gigabyte GN-WB01GS" Ta USB 107.It "Gigabyte GN-WI05GS" Ta USB 108.It "Hawking HWUG1" Ta USB 109.It "Hawking HWU54DM" Ta USB 110.It "Hercules HWGUSB2-54-LB" Ta USB 111.It "Hercules HWGUSB2-54V2-AP" Ta USB 112.It "LevelOne WNC-0301USB v3" Ta USB 113.It "Linksys WUSB54G rev C" Ta USB 114.It "Linksys WUSB54GR" Ta USB 115.It "Planex GW-US54HP" Ta USB 116.It "Planex GW-US54Mini2" Ta USB 117.It "Planex GW-USMM" Ta USB 118.It "Senao NUB-3701" Ta USB 119.It "Sitecom WL-113 ver 2" Ta USB 120.It "Sitecom WL-172" Ta USB 121.It "Sweex LW053" Ta USB 122.It "TP-LINK TL-WN321G" Ta USB 123.El 124.Sh EXAMPLES 125Join an existing BSS network (i.e., connect to an access point): 126.Bd -literal -offset indent 127ifconfig wlan create wlandev rum0 inet 192.168.0.20 \e 128 netmask 0xffffff00 129.Ed 130.Pp 131Join a specific BSS network with network name 132.Dq Li my_net : 133.Pp 134.Dl "ifconfig wlan create wlandev rum0 ssid my_net up" 135.Pp 136Join a specific BSS network with 64-bit WEP encryption: 137.Bd -literal -offset indent 138ifconfig wlan create wlandev rum0 ssid my_net \e 139 wepmode on wepkey 0x1234567890 weptxkey 1 up 140.Ed 141.Pp 142Join a specific BSS network with 128-bit WEP encryption: 143.Bd -literal -offset indent 144ifconfig wlan create wlandev rum0 wlanmode adhoc ssid my_net \e 145 wepmode on wepkey 0x01020304050607080910111213 weptxkey 1 146.Ed 147.Sh DIAGNOSTICS 148.Bl -diag 149.It "rum%d: could not load 8051 microcode" 150An error occurred while attempting to upload the microcode to the onboard 8051 151microcontroller unit. 152The driver will reset the hardware. 153This should not happen. 154.El 155.Sh SEE ALSO 156.Xr intro 4 , 157.Xr netintro 4 , 158.Xr usb 4 , 159.Xr wlan 4 , 160.Xr wlan_amrr 4 , 161.Xr wlan_ccmp 4 , 162.Xr wlan_tkip 4 , 163.Xr wlan_wep 4 , 164.Xr wlan_xauth 4 , 165.Xr hostapd 8 , 166.Xr ifconfig 8 , 167.Xr wpa_supplicant 8 . 168.Rs 169.%T "Ralink Technology" 170.%U http://www.ralinktech.com/ 171.Re 172.Sh HISTORY 173The 174.Nm 175driver first appeared in 176.Ox 4.0 . 177.Sh AUTHORS 178.An -nosplit 179The original 180.Nm 181driver was written by 182.An Niall O'Higgins Aq Mt niallo@openbsd.org 183and 184.An Damien Bergamini Aq Mt damien@openbsd.org . 185.Sh BUGS 186Host AP mode doesn't support client power save. 187Clients using power save mode will experience 188packet loss (disabling power saving on the client will fix this). 189