1.\" 2.\" Copyright (c) 2001-2003, Shunsuke Akiyama <akiyama@FreeBSD.org>. 3.\" All rights reserved. 4.\" 5.\" Redistribution and use in source and binary forms, with or without 6.\" modification, are permitted provided that the following conditions 7.\" are met: 8.\" 1. Redistributions of source code must retain the above copyright 9.\" notice, this list of conditions and the following disclaimer. 10.\" 2. Redistributions in binary form must reproduce the above copyright 11.\" notice, this list of conditions and the following disclaimer in the 12.\" documentation and/or other materials provided with the distribution. 13.\" 14.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 15.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 16.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 17.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 18.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 19.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 20.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 21.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 22.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 23.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 24.\" SUCH DAMAGE. 25.\" 26.\" $FreeBSD$ 27.\" 28.Dd May 3, 2003 29.Dt RUE 4 30.Os 31.Sh NAME 32.Nm rue 33.Nd "RealTek RTL8150 USB To Fast Ethernet controller driver" 34.Sh SYNOPSIS 35.Cd "device uhci" 36.Cd "device ohci" 37.Cd "device usb" 38.Cd "device miibus" 39.Cd "device rue" 40.Sh DESCRIPTION 41The 42.Nm 43driver provides support for USB Ethernet adapters based on the RealTek 44RTL8150 USB to Fast Ethernet controller chip. 45This includes the Melco Inc. LUA-KTX, the GREEN HOUSE GH-USB100B, 46and the Billionton 10/100 FastEthernet USBKR2 "thumb" adaptor. 47.Pp 48The RTL8150 contains an integrated Fast Ethernet MAC, which supports 49both 10 and 100Mbps speeds in either full or half duplex. 50Although designed to interface with 51100Mbps peripheral, the existing USB standard specifies a maximum 52transfer speed of 12Mbps. 53Users should therefore not expect to actually 54achieve 100Mbps speeds with this device. 55.Pp 56The 57.Nm 58driver supports the following media types: 59.Bl -tag -width ".Cm 10baseT/UTP" 60.It Cm autoselect 61Enable auto selection of the media type and options. 62The user can manually override 63the auto selected mode by adding media options to the 64.Pa /etc/rc.conf 65file. 66.It Cm 10baseT/UTP 67Set 10Mbps operation. 68The 69.Cm mediaopt 70option can also be used to select either 71.Cm full-duplex 72or 73.Cm half-duplex 74modes. 75.It Cm 100baseTX 76Set 100Mbps (Fast Ethernet) operation. 77The 78.Cm mediaopt 79option can also be used to select either 80.Cm full-duplex 81or 82.Cm half-duplex 83modes. 84.El 85.Pp 86The 87.Nm 88driver supports the following media options: 89.Bl -tag -width ".Cm 10baseT/UTP" 90.It Cm full-duplex 91Force full duplex operation. 92.It Cm half-duplex 93Force half duplex operation. 94.El 95.Pp 96For more information on configuring this device, see 97.Xr ifconfig 8 . 98.Sh DIAGNOSTICS 99.Bl -diag 100.It "rue%d: watchdog timeout" 101A packet was queued for transmission and a transmit command was 102issued, however the device failed to acknowledge the transmission 103before a timeout expired. 104.It "rue%d: rx list init failed" 105The driver failed to allocate an mbuf for the transmitter ring. 106.It "rue%d: no memory for rx list" 107The driver failed to allocate an mbuf for the receiver ring. 108.El 109.Sh SEE ALSO 110.Xr arp 4 , 111.Xr netintro 4 , 112.Xr ng_ether 4 , 113.Xr ifconfig 8 114.Rs 115.%T "ReakTek RTL8150 data sheet" 116.%O ftp://ftp.realtek.com.tw/lancard/data_sheet/8150/ 117.Re 118.Sh HISTORY 119The 120.Nm 121device driver first appeared in 122.Fx 5.1 . 123.Sh AUTHORS 124The 125.Nm 126driver was written by 127.An Shunsuke Akiyama Aq akiyama@FreeBSD.org . 128