xref: /freebsd/share/man/man4/pfsync.4 (revision 63a938566d524836885917d95bd491aa4400b181)
1.\"	$OpenBSD: pfsync.4,v 1.28 2009/02/17 10:05:18 dlg Exp $
2.\"
3.\" Copyright (c) 2002 Michael Shalayeff
4.\" Copyright (c) 2003-2004 Ryan McBride
5.\" All rights reserved.
6.\"
7.\" Redistribution and use in source and binary forms, with or without
8.\" modification, are permitted provided that the following conditions
9.\" are met:
10.\" 1. Redistributions of source code must retain the above copyright
11.\"    notice, this list of conditions and the following disclaimer.
12.\" 2. Redistributions in binary form must reproduce the above copyright
13.\"    notice, this list of conditions and the following disclaimer in the
14.\"    documentation and/or other materials provided with the distribution.
15.\"
16.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
17.\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
18.\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
19.\" IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
20.\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
21.\" NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF MIND,
22.\" USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
23.\" THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
24.\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
25.\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
26.\"
27.\" $FreeBSD$
28.\"
29.Dd August 18, 2017
30.Dt PFSYNC 4
31.Os
32.Sh NAME
33.Nm pfsync
34.Nd packet filter state table sychronisation interface
35.Sh SYNOPSIS
36.Cd "device pfsync"
37.Sh DESCRIPTION
38The
39.Nm
40interface is a pseudo-device which exposes certain changes to the state
41table used by
42.Xr pf 4 .
43State changes can be viewed by invoking
44.Xr tcpdump 1
45on the
46.Nm
47interface.
48If configured with a physical synchronisation interface,
49.Nm
50will also send state changes out on that interface,
51and insert state changes received on that interface from other systems
52into the state table.
53.Pp
54By default, all local changes to the state table are exposed via
55.Nm .
56State changes from packets received by
57.Nm
58over the network are not rebroadcast.
59Updates to states created by a rule marked with the
60.Ar no-sync
61keyword are ignored by the
62.Nm
63interface (see
64.Xr pf.conf 5
65for details).
66.Pp
67The
68.Nm
69interface will attempt to collapse multiple state updates into a single
70packet where possible.
71The maximum number of times a single state can be updated before a
72.Nm
73packet will be sent out is controlled by the
74.Ar maxupd
75parameter to ifconfig
76(see
77.Xr ifconfig 8
78and the example below for more details).
79The sending out of a
80.Nm
81packet will be delayed by a maximum of one second.
82.Sh NETWORK SYNCHRONISATION
83States can be synchronised between two or more firewalls using this
84interface, by specifying a synchronisation interface using
85.Xr ifconfig 8 .
86For example, the following command sets fxp0 as the synchronisation
87interface:
88.Bd -literal -offset indent
89# ifconfig pfsync0 syncdev fxp0
90.Ed
91.Pp
92By default, state change messages are sent out on the synchronisation
93interface using IP multicast packets to the 224.0.0.240 group address.
94An alternative destination address for
95.Nm
96packets can be specified using the
97.Ic syncpeer
98keyword.
99This can be used in combination with
100.Xr ipsec 4
101to protect the synchronisation traffic.
102In such a configuration, the syncdev should be set to the
103.Xr enc 4
104interface, as this is where the traffic arrives when it is decapsulated,
105e.g.:
106.Bd -literal -offset indent
107# ifconfig pfsync0 syncpeer 10.0.0.2 syncdev enc0
108.Ed
109.Pp
110It is important that the pfsync traffic be well secured
111as there is no authentication on the protocol and it would
112be trivial to spoof packets which create states, bypassing the pf ruleset.
113Either run the pfsync protocol on a trusted network \- ideally a network
114dedicated to pfsync messages such as a crossover cable between two firewalls,
115or specify a peer address and protect the traffic with
116.Xr ipsec 4 .
117.Pp
118.Nm
119has the following
120.Xr sysctl 8
121tunables:
122.Bl -tag -width ".Va net.pfsync"
123.It Va net.pfsync.carp_demotion_factor
124Value added to
125.Va net.inet.carp.demotion
126while
127.Nm
128tries to perform its bulk update.
129See
130.Xr carp 4
131for more information.
132Default value is 240.
133.El
134.Sh EXAMPLES
135.Nm
136and
137.Xr carp 4
138can be used together to provide automatic failover of a pair of firewalls
139configured in parallel.
140One firewall will handle all traffic until it dies, is shut down, or is
141manually demoted, at which point the second firewall will take over
142automatically.
143.Pp
144Both firewalls in this example have three
145.Xr sis 4
146interfaces.
147sis0 is the external interface, on the 10.0.0.0/24 subnet; sis1 is the
148internal interface, on the 192.168.0.0/24 subnet; and sis2 is the
149.Nm
150interface, using the 192.168.254.0/24 subnet.
151A crossover cable connects the two firewalls via their sis2 interfaces.
152On all three interfaces, firewall A uses the .254 address, while firewall B
153uses .253.
154The interfaces are configured as follows (firewall A unless otherwise
155indicated):
156.Pp
157Interfaces configuration in
158.Pa /etc/rc.conf :
159.Bd -literal -offset indent
160network_interfaces="lo0 sis0 sis1 sis2"
161ifconfig_sis0="10.0.0.254/24"
162ifconfig_sis0_alias0="inet 10.0.0.1/24 vhid 1 pass foo"
163ifconfig_sis1="192.168.0.254/24"
164ifconfig_sis1_alias0="inet 192.168.0.1/24 vhid 2 pass bar"
165ifconfig_sis2="192.168.254.254/24"
166pfsync_enable="YES"
167pfsync_syncdev="sis2"
168.Ed
169.Pp
170.Xr pf 4
171must also be configured to allow
172.Nm
173and
174.Xr carp 4
175traffic through.
176The following should be added to the top of
177.Pa /etc/pf.conf :
178.Bd -literal -offset indent
179pass quick on { sis2 } proto pfsync keep state (no-sync)
180pass on { sis0 sis1 } proto carp keep state (no-sync)
181.Ed
182.Pp
183It is preferable that one firewall handle the forwarding of all the traffic,
184therefore the
185.Ar advskew
186on the backup firewall's
187.Xr carp 4
188vhids should be set to something higher than
189the primary's.
190For example, if firewall B is the backup, its
191carp1 configuration would look like this:
192.Bd -literal -offset indent
193ifconfig_sis1_alias0="inet 192.168.0.1/24 vhid 2 pass bar advskew 100"
194.Ed
195.Pp
196The following must also be added to
197.Pa /etc/sysctl.conf :
198.Bd -literal -offset indent
199net.inet.carp.preempt=1
200.Ed
201.Sh SEE ALSO
202.Xr tcpdump 1 ,
203.Xr bpf 4 ,
204.Xr carp 4 ,
205.Xr enc 4 ,
206.Xr inet 4 ,
207.Xr inet6 4 ,
208.Xr ipsec 4 ,
209.Xr netintro 4 ,
210.Xr pf 4 ,
211.Xr pf.conf 5 ,
212.Xr protocols 5 ,
213.Xr rc.conf 5 ,
214.Xr ifconfig 8
215.Sh HISTORY
216The
217.Nm
218device first appeared in
219.Ox 3.3 .
220It was first imported to
221.Fx 5.3 .
222.Pp
223The
224.Nm
225protocol and kernel implementation were significantly modified in
226.Fx 9.0 .
227The newer protocol is not compatible with older one and will not interoperate
228with it.
229