1.\" Copyright (c) 1996-1999 Whistle Communications, Inc. 2.\" All rights reserved. 3.\" 4.\" Subject to the following obligations and disclaimer of warranty, use and 5.\" redistribution of this software, in source or object code forms, with or 6.\" without modifications are expressly permitted by Whistle Communications; 7.\" provided, however, that: 8.\" 1. Any and all reproductions of the source or object code must include the 9.\" copyright notice above and the following disclaimer of warranties; and 10.\" 2. No rights are granted, in any manner or form, to use Whistle 11.\" Communications, Inc. trademarks, including the mark "WHISTLE 12.\" COMMUNICATIONS" on advertising, endorsements, or otherwise except as 13.\" such appears in the above copyright notice or in the software. 14.\" 15.\" THIS SOFTWARE IS BEING PROVIDED BY WHISTLE COMMUNICATIONS "AS IS", AND 16.\" TO THE MAXIMUM EXTENT PERMITTED BY LAW, WHISTLE COMMUNICATIONS MAKES NO 17.\" REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED, REGARDING THIS SOFTWARE, 18.\" INCLUDING WITHOUT LIMITATION, ANY AND ALL IMPLIED WARRANTIES OF 19.\" MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. 20.\" WHISTLE COMMUNICATIONS DOES NOT WARRANT, GUARANTEE, OR MAKE ANY 21.\" REPRESENTATIONS REGARDING THE USE OF, OR THE RESULTS OF THE USE OF THIS 22.\" SOFTWARE IN TERMS OF ITS CORRECTNESS, ACCURACY, RELIABILITY OR OTHERWISE. 23.\" IN NO EVENT SHALL WHISTLE COMMUNICATIONS BE LIABLE FOR ANY DAMAGES 24.\" RESULTING FROM OR ARISING OUT OF ANY USE OF THIS SOFTWARE, INCLUDING 25.\" WITHOUT LIMITATION, ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, 26.\" PUNITIVE, OR CONSEQUENTIAL DAMAGES, PROCUREMENT OF SUBSTITUTE GOODS OR 27.\" SERVICES, LOSS OF USE, DATA OR PROFITS, HOWEVER CAUSED AND UNDER ANY 28.\" THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 29.\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 30.\" THIS SOFTWARE, EVEN IF WHISTLE COMMUNICATIONS IS ADVISED OF THE POSSIBILITY 31.\" OF SUCH DAMAGE. 32.\" 33.\" Author: Archie Cobbs <archie@FreeBSD.org> 34.\" 35.\" $FreeBSD$ 36.\" $Whistle: ng_pppoe.8,v 1.1 1999/01/25 23:46:27 archie Exp $ 37.\" 38.Dd November 13, 2012 39.Dt NG_PPPOE 4 40.Os 41.Sh NAME 42.Nm ng_pppoe 43.Nd RFC 2516 PPPoE protocol netgraph node type 44.Sh SYNOPSIS 45.In sys/types.h 46.In net/ethernet.h 47.In netgraph.h 48.In netgraph/ng_pppoe.h 49.Sh DESCRIPTION 50The 51.Nm pppoe 52node type performs the PPPoE protocol. 53It is used in conjunction with the 54.Xr netgraph 4 55extensions to the Ethernet framework to divert and inject Ethernet packets 56to and from a PPP agent (which is not specified). 57.Pp 58The 59.Dv NGM_PPPOE_GET_STATUS 60control message can be used at any time to query the current status 61of the PPPoE module. 62The only statistics presently available are the 63total packet counts for input and output. 64This node does not yet support 65the 66.Dv NGM_TEXT_STATUS 67control message. 68.Sh HOOKS 69This node type supports the following hooks: 70.Bl -tag -width ".Va [unspecified]" 71.It Va ethernet 72The hook that should normally be connected to an 73.Xr ng_ether 4 74node. 75Once connected, 76.Nm 77will send a message down this hook to determine Ethernet address of 78the underlying node. 79Obtained address will be stored and then used for outgoing datagrams. 80.It Va debug 81Presently no use. 82.It Va [unspecified] 83Any other name is assumed to be a session hook that will be connected to 84a PPP client agent, or a PPP server agent. 85.El 86.Sh CONTROL MESSAGES 87This node type supports the generic control messages, plus the following: 88.Bl -tag -width 3n 89.It Dv NGM_PPPOE_GET_STATUS 90This command returns status information in a 91.Dv "struct ngpppoestat" : 92.Bd -literal -offset 4n 93struct ngpppoestat { 94 u_int packets_in; /* packets in from Ethernet */ 95 u_int packets_out; /* packets out towards Ethernet */ 96}; 97.Ed 98.It Dv NGM_TEXT_STATUS 99This generic message returns a human-readable version of the node status. 100(not yet) 101.It Dv NGM_PPPOE_CONNECT Pq Ic pppoe_connect 102Tell a nominated newly created hook that its session should enter 103the state machine as a client. 104It must be newly created and a service name can be given as an argument. 105It is legal to specify a zero-length service name, this is common 106on some DSL setups. 107It is possible to request a connection to a specific 108access concentrator by its name using the "AC-Name\\Service-Name" syntax. 109A session request packet will be broadcasted on the Ethernet. 110This command uses the 111.Dv ngpppoe_init_data 112structure shown below. 113.It Dv NGM_PPPOE_LISTEN Pq Ic pppoe_listen 114Tell a nominated newly created hook that its session should enter 115the state machine as a server listener. 116The argument 117given is the name of the service to listen for. 118A zero-length service name will match all requests for service. 119A matching service request 120packet will be passed unmodified back to the process responsible 121for starting the service. 122It can then examine it and pass it on to 123the session that is started to answer the request. 124This command uses the 125.Dv ngpppoe_init_data 126structure shown below. 127.It Dv NGM_PPPOE_OFFER Pq Ic pppoe_offer 128Tell a nominated newly created hook that its session should enter 129the state machine as a server. 130The argument given is the name of the service to offer. 131A zero-length service 132is legal. 133The State machine will progress to a state where it will await 134a request packet to be forwarded to it from the startup server, 135which in turn probably received it from a LISTEN mode hook (see above). 136This is so 137that information that is required for the session that is embedded in 138the original session request packet, is made available to the state machine 139that eventually answers the request. 140When the Session request packet is 141received, the session negotiation will proceed. 142This command uses the 143.Dv ngpppoe_init_data 144structure shown below. 145.El 146.Pp 147The three commands above use a common data structure: 148.Bd -literal -offset 4n 149struct ngpppoe_init_data { 150 char hook[NG_HOOKSIZ]; /* hook to monitor on */ 151 uint16_t data_len; /* length of the service name */ 152 char data[0]; /* init data goes here */ 153}; 154.Ed 155.Bl -tag -width 3n 156.It Dv NGM_PPPOE_SUCCESS Pq Ic pppoe_success 157This command is sent to the node that started this session with one of the 158above messages, and reports a state change. 159This message reports successful Session negotiation. 160It uses the structure shown below, and 161reports back the hook name corresponding to the successful session. 162.It Dv NGM_PPPOE_FAIL Pq Ic pppoe_fail 163This command is sent to the node that started this session with one of the 164above messages, and reports a state change. 165This message reports failed Session negotiation. 166It uses the structure shown below, and 167reports back the hook name corresponding to the failed session. 168The hook will probably have been removed immediately after sending this 169message. 170.It Dv NGM_PPPOE_CLOSE Pq Ic pppoe_close 171This command is sent to the node that started this session with one of the 172above messages, and reports a state change. 173This message reports a request to close a session. 174It uses the structure shown below, and 175reports back the hook name corresponding to the closed session. 176The hook will probably have been removed immediately after sending this 177message. 178At present this message is not yet used and a 179.Dv NGM_PPPOE_FAIL 180message 181will be received at closure instead. 182.It Dv NGM_PPPOE_ACNAME 183This command is sent to the node that started this session with one of the 184above messages, and reports the Access Concentrator Name. 185.El 186.Pp 187The four commands above use a common data structure: 188.Bd -literal -offset 4n 189struct ngpppoe_sts { 190 char hook[NG_HOOKSIZ]; /* hook associated with event session */ 191}; 192.Ed 193.Bl -tag -width 3n 194.It Dv NGM_PPPOE_GETMODE Pq Ic pppoe_getmode 195This command returns the current compatibility mode of the node 196as a string. 197.Tn ASCII 198form of this message is 199.Qq Li pppoe_getmode . 200The following keywords can be returned: 201.Bl -tag -width 3n 202.It Qq standard 203The node operates according to RFC 2516. 204.It Qq 3Com 205When 206.Nm 207is a PPPoE client, it initiates a session encapsulating packets into 208incorrect 3Com ethertypes. 209This compatibility option does not affect server mode. 210In server mode 211.Nm 212supports both modes simultaneously, depending on the ethertype, the 213client used when connecting. 214.It Qq D-Link 215When 216.Nm 217is a PPPoE server serving only specific Service-Name(s), it will respond 218to a PADI requests with empty Service-Name tag, returning all available 219Service-Name(s) on node. 220This option is necessary for compatibility with D-Link DI-614+ and DI-624+ 221SOHO routers as clients, when serving only specific Service-Name. 222This compatibility option does not affect client mode. 223.El 224.It Dv NGM_PPPOE_SETMODE Pq Ic pppoe_setmode 225Configure node to the specified mode. 226The string argument is required. 227This command understands the same keywords that are returned by the 228.Dv NGM_PPPOE_GETMODE 229command. 230.Tn ASCII 231form of this message is 232.Qq Li pppoe_setmode . 233For example, the following command will configure the node to initiate 234the next session in the proprietary 3Com mode: 235.Bd -literal -offset indent 236ngctl msg fxp0:orphans pppoe_setmode '"3Com"' 237.Ed 238.It Dv NGM_PPPOE_SETENADDR Pq Ic setenaddr 239Set the node Ethernet address for outgoing datagrams. 240This message is important when a node has failed to obtain an Ethernet 241address from its peer on the 242.Dv ethernet 243hook, or when user wants to override this address with another one. 244.Tn ASCII 245form of this message is 246.Qq Li setenaddr . 247.El 248.Sh SHUTDOWN 249This node shuts down upon receipt of a 250.Dv NGM_SHUTDOWN 251control message, when all session have been disconnected or when the 252.Dv ethernet 253hook is disconnected. 254.Sh EXAMPLES 255The following code uses 256.Dv libnetgraph 257to set up a 258.Nm 259node and connect it to both a socket node and an Ethernet node. 260It can handle the case of when a 261.Nm 262node is already attached to the Ethernet. 263It then starts a client session. 264.Bd -literal 265#include <stdio.h> 266#include <stdlib.h> 267#include <string.h> 268#include <ctype.h> 269#include <unistd.h> 270#include <sysexits.h> 271#include <errno.h> 272#include <err.h> 273 274#include <sys/types.h> 275#include <sys/socket.h> 276#include <sys/select.h> 277#include <net/ethernet.h> 278 279#include <netgraph.h> 280#include <netgraph/ng_ether.h> 281#include <netgraph/ng_pppoe.h> 282#include <netgraph/ng_socket.h> 283static int setup(char *ethername, char *service, char *sessname, 284 int *dfd, int *cfd); 285 286int 287main() 288{ 289 int fd1, fd2; 290 setup("xl0", NULL, "fred", &fd1, &fd2); 291 sleep (30); 292} 293 294static int 295setup(char *ethername, char *service, char *sessname, 296 int *dfd, int *cfd) 297{ 298 struct ngm_connect ngc; /* connect */ 299 struct ngm_mkpeer mkp; /* mkpeer */ 300 /******** nodeinfo stuff **********/ 301 u_char rbuf[2 * 1024]; 302 struct ng_mesg *const resp = (struct ng_mesg *) rbuf; 303 struct hooklist *const hlist 304 = (struct hooklist *) resp->data; 305 struct nodeinfo *const ninfo = &hlist->nodeinfo; 306 int ch, no_hooks = 0; 307 struct linkinfo *link; 308 struct nodeinfo *peer; 309 /****message to connect PPPoE session*****/ 310 struct { 311 struct ngpppoe_init_data idata; 312 char service[100]; 313 } message; 314 /********tracking our little graph ********/ 315 char path[100]; 316 char source_ID[NG_NODESIZ]; 317 char pppoe_node_name[100]; 318 int k; 319 320 /* 321 * Create the data and control sockets 322 */ 323 if (NgMkSockNode(NULL, cfd, dfd) < 0) { 324 return (errno); 325 } 326 /* 327 * find the ether node of the name requested by asking it for 328 * it's inquiry information. 329 */ 330 if (strlen(ethername) > 16) 331 return (EINVAL); 332 sprintf(path, "%s:", ethername); 333 if (NgSendMsg(*cfd, path, NGM_GENERIC_COOKIE, 334 NGM_LISTHOOKS, NULL, 0) < 0) { 335 return (errno); 336 } 337 /* 338 * the command was accepted so it exists. Await the reply (It's 339 * almost certainly already waiting). 340 */ 341 if (NgRecvMsg(*cfd, resp, sizeof(rbuf), NULL) < 0) { 342 return (errno); 343 } 344 /** 345 * The following is available about the node: 346 * ninfo->name (string) 347 * ninfo->type (string) 348 * ninfo->id (uint32_t) 349 * ninfo->hooks (uint32_t) (count of hooks) 350 * check it is the correct type. and get it's ID for use 351 * with mkpeer later. 352 */ 353 if (strncmp(ninfo->type, NG_ETHER_NODE_TYPE, 354 strlen(NG_ETHER_NODE_TYPE)) != 0) { 355 return (EPROTOTYPE); 356 } 357 sprintf(source_ID, "[%08x]:", ninfo->id); 358 359 /* 360 * look for a hook already attached. 361 */ 362 for (k = 0; k < ninfo->hooks; k++) { 363 /** 364 * The following are available about each hook. 365 * link->ourhook (string) 366 * link->peerhook (string) 367 * peer->name (string) 368 * peer->type (string) 369 * peer->id (uint32_t) 370 * peer->hooks (uint32_t) 371 */ 372 link = &hlist->link[k]; 373 peer = &hlist->link[k].nodeinfo; 374 375 /* Ignore debug hooks */ 376 if (strcmp("debug", link->ourhook) == 0) 377 continue; 378 379 /* If the orphans hook is attached, use that */ 380 if (strcmp(NG_ETHER_HOOK_ORPHAN, 381 link->ourhook) == 0) { 382 break; 383 } 384 /* the other option is the 'divert' hook */ 385 if (strcmp("NG_ETHER_HOOK_DIVERT", 386 link->ourhook) == 0) { 387 break; 388 } 389 } 390 391 /* 392 * See if we found a hook there. 393 */ 394 if (k < ninfo->hooks) { 395 if (strcmp(peer->type, NG_PPPOE_NODE_TYPE) == 0) { 396 /* 397 * If it's a type PPPoE, we skip making one 398 * ourself, but we continue, using 399 * the existing one. 400 */ 401 sprintf(pppoe_node_name, "[%08x]:", peer->id); 402 } else { 403 /* 404 * There is already someone hogging the data, 405 * return an error. Some day we'll try 406 * daisy-chaining.. 407 */ 408 return (EBUSY); 409 } 410 } else { 411 412 /* 413 * Try make a node of type PPPoE against node "ID" 414 * On hook NG_ETHER_HOOK_ORPHAN. 415 */ 416 snprintf(mkp.type, sizeof(mkp.type), 417 "%s", NG_PPPOE_NODE_TYPE); 418 snprintf(mkp.ourhook, sizeof(mkp.ourhook), 419 "%s", NG_ETHER_HOOK_ORPHAN); 420 snprintf(mkp.peerhook, sizeof(mkp.peerhook), 421 "%s", NG_PPPOE_HOOK_ETHERNET); 422 /* Send message */ 423 if (NgSendMsg(*cfd, source_ID, NGM_GENERIC_COOKIE, 424 NGM_MKPEER, &mkp, sizeof(mkp)) < 0) { 425 return (errno); 426 } 427 /* 428 * Work out a name for the new node. 429 */ 430 sprintf(pppoe_node_name, "%s:%s", 431 source_ID, NG_ETHER_HOOK_ORPHAN); 432 } 433 /* 434 * We now have a PPPoE node attached to the Ethernet 435 * card. The Ethernet is addressed as ethername: The PPPoE 436 * node is addressed as pppoe_node_name: attach to it. 437 * Connect socket node to specified node Use the same hook 438 * name on both ends of the link. 439 */ 440 snprintf(ngc.path, sizeof(ngc.path), "%s", pppoe_node_name); 441 snprintf(ngc.ourhook, sizeof(ngc.ourhook), "%s", sessname); 442 snprintf(ngc.peerhook, sizeof(ngc.peerhook), "%s", sessname); 443 444 if (NgSendMsg(*cfd, ".:", NGM_GENERIC_COOKIE, 445 NGM_CONNECT, &ngc, sizeof(ngc)) < 0) { 446 return (errno); 447 } 448 449#ifdef NONSTANDARD 450 /* 451 * In some cases we are speaking to 3Com hardware, so 452 * configure node to non-standard mode. 453 */ 454 if (NgSendMsg(*cfd, ngc.path, NGM_PPPOE_COOKIE, 455 NGM_PPPOE_SETMODE, NG_PPPOE_NONSTANDARD, 456 strlen(NG_PPPOE_NONSTANDARD) + 1) == -1) { 457 return (errno); 458 } 459#endif 460 461 /* 462 * Send it a message telling it to start up. 463 */ 464 bzero(&message, sizeof(message)); 465 snprintf(message.idata.hook, sizeof(message.idata.hook), 466 "%s", sessname); 467 if (service == NULL) { 468 message.idata.data_len = 0; 469 } else { 470 snprintf(message.idata.data, 471 sizeof(message.idata.data), "%s", service); 472 message.idata.data_len = strlen(service); 473 } 474 /* Tell session/hook to start up as a client */ 475 if (NgSendMsg(*cfd, ngc.path, 476 NGM_PPPOE_COOKIE, NGM_PPPOE_CONNECT, &message.idata, 477 sizeof(message.idata) + message.idata.data_len) < 0) { 478 return (errno); 479 } 480 return (0); 481} 482.Ed 483.Sh SEE ALSO 484.Xr netgraph 3 , 485.Xr netgraph 4 , 486.Xr ng_ether 4 , 487.Xr ng_ppp 4 , 488.Xr ng_socket 4 , 489.Xr ngctl 8 , 490.Xr ppp 8 491.Rs 492.%A L. Mamakos 493.%A K. Lidl 494.%A J. Evarts 495.%A D. Carrel 496.%A D. Simone 497.%A R. Wheeler 498.%T "A Method for transmitting PPP over Ethernet (PPPoE)" 499.%O RFC 2516 500.Re 501.Sh HISTORY 502The 503.Nm 504node type was implemented in 505.Fx 4.0 . 506.Sh AUTHORS 507.An Julian Elischer Aq julian@FreeBSD.org 508