xref: /freebsd/share/man/man4/ng_patch.4 (revision 5f4c09dd85bff675e0ca63c55ea3c517e0fddfcc)
1.\" Copyright (c) 2010 Maxim Ignatenko <gelraen.ua@gmail.com>
2.\" Copyright (c) 2010 Vadim Goncharov <vadimnuclight@tpu.ru>
3.\" Copyright (c) 2015 Dmitry Vagin <daemon.hammer@ya.ru>
4.\" All rights reserved.
5.\"
6.\" Redistribution and use in source and binary forms, with or without
7.\" modification, are permitted provided that the following conditions
8.\" are met:
9.\" 1. Redistributions of source code must retain the above copyright
10.\"    notice, this list of conditions and the following disclaimer.
11.\" 2. Redistributions in binary form must reproduce the above copyright
12.\"    notice, this list of conditions and the following disclaimer in the
13.\"    documentation and/or other materials provided with the distribution.
14.\"
15.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
16.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
17.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
18.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
19.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
20.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
21.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
22.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
23.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
24.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
25.\" SUCH DAMAGE.
26.\"
27.Dd November 17, 2015
28.Dt NG_PATCH 4
29.Os
30.Sh NAME
31.Nm ng_patch
32.Nd "trivial mbuf data modifying netgraph node type"
33.Sh SYNOPSIS
34.In netgraph/ng_patch.h
35.Sh DESCRIPTION
36The
37.Nm patch
38node performs data modification of packets passing through it.
39Modifications are restricted to a subset of C language operations
40on unsigned integers of 8, 16, 32 or 64 bit size.
41These are: set to new value (=), addition (+=), subtraction (-=),
42multiplication (*=), division (/=), negation (= -),
43bitwise AND (&=), bitwise OR (|=), bitwise eXclusive OR (^=),
44shift left (<<=), shift right (>>=).
45A negation operation is the one exception: integer is treated as signed
46and second operand (the
47.Va value )
48is not used.
49If there is more than one modification operation, they are applied
50to packets sequentially in the order they were specified by the user.
51The data payload of a packet is viewed as an array of bytes, with a zero offset
52corresponding to the very first byte of packet headers, and the
53.Va length
54bytes beginning from
55.Va offset
56as a single integer in network byte order.
57An additional offset can be optionally
58requested at configuration time to account for packet type.
59.Sh HOOKS
60This node type has two hooks:
61.Bl -tag -width ".Va out"
62.It Va in
63Packets received on this hook are modified according to rules specified
64in the configuration and then forwarded to the
65.Ar out
66hook, if it exists.
67Otherwise they are reflected back to the
68.Ar in
69hook.
70.It Va out
71Packets received on this hook are forwarded to the
72.Ar in
73hook without any changes.
74.El
75.Sh CONTROL MESSAGES
76This node type supports the generic control messages, plus the following:
77.Bl -tag -width foo
78.It Dv NGM_PATCH_SETDLT Pq Ic setdlt
79Sets the data link type on the
80.Va in
81hook (to help calculate relative offset). Currently, supported types are
82.Cm DLT_RAW
83(raw IP datagrams , no offset applied, the default) and
84.Cm DLT_EN10MB
85(Ethernet). DLT_ definitions can be found in
86.In net/bpf.h .
87If you want to work on the link layer header you must use no additional offset by specifying
88.Cm DLT_RAW .
89If
90.Cm EN10MB
91is specified, then the optional additional offset will take into account the Ethernet header and a QinQ header if present.
92.It Dv NGM_PATCH_GETDLT Pq Ic getdlt
93This control message returns the data link type of the
94.Va in
95hook.
96.It Dv NGM_PATCH_SETCONFIG Pq Ic setconfig
97This command sets the sequence of modify operations
98that will be applied to incoming data on a hook.
99The following
100.Vt "struct ng_patch_config"
101must be supplied as an argument:
102.Bd -literal -offset 4n
103struct ng_patch_op {
104	uint32_t	offset;
105	uint16_t	length; /* 1,2,4 or 8 bytes */
106	uint16_t	mode;
107	uint64_t	value;
108};
109/* Patching modes */
110#define NG_PATCH_MODE_SET	1
111#define NG_PATCH_MODE_ADD	2
112#define NG_PATCH_MODE_SUB	3
113#define NG_PATCH_MODE_MUL	4
114#define NG_PATCH_MODE_DIV	5
115#define NG_PATCH_MODE_NEG	6
116#define NG_PATCH_MODE_AND	7
117#define NG_PATCH_MODE_OR	8
118#define NG_PATCH_MODE_XOR	9
119#define NG_PATCH_MODE_SHL	10
120#define NG_PATCH_MODE_SHR	11
121
122struct ng_patch_config {
123	uint32_t	count;
124	uint32_t	csum_flags;
125	uint32_t	relative_offset;
126	struct ng_patch_op ops[];
127};
128.Ed
129.Pp
130The
131.Va csum_flags
132can be set to any combination of CSUM_IP, CSUM_TCP, CSUM_SCTP and CSUM_UDP
133(other values are ignored) for instructing the IP stack to recalculate the
134corresponding checksum before transmitting packet on output interface.
135The
136.Nm
137node does not do any checksum correction by itself.
138.It Dv NGM_PATCH_GETCONFIG Pq Ic getconfig
139This control message returns the current set of modify operations,
140in the form of a
141.Vt "struct ng_patch_config" .
142.It Dv NGM_PATCH_GET_STATS Pq Ic getstats
143Returns the node's statistics as a
144.Vt "struct ng_patch_stats" .
145.It Dv NGM_PATCH_CLR_STATS Pq Ic clrstats
146Clears the node's statistics.
147.It Dv NGM_PATCH_GETCLR_STATS Pq Ic getclrstats
148This command is identical to
149.Dv NGM_PATCH_GET_STATS ,
150except that the statistics are also atomically cleared.
151.El
152.Sh SHUTDOWN
153This node shuts down upon receipt of a
154.Dv NGM_SHUTDOWN
155control message, or when all hooks have been disconnected.
156.Sh EXAMPLES
157This
158.Nm
159node was designed to modify TTL and TOS/DSCP fields in IP packets.
160As an example,
161suppose you have two adjacent simplex links to a remote network
162(e.g.\& satellite), so that the packets expiring in between
163will generate unwanted ICMP-replies which have to go forth, not back.
164Thus you need to raise TTL of every packet entering link by 2
165to ensure the TTL will not reach zero there.
166To achieve this you can set an
167.Xr ipfw 8
168rule to use the
169.Cm netgraph
170action to inject packets which are going to the simplex link into the patch node, by using the
171following
172.Xr ngctl 8
173script:
174.Bd -literal -offset 4n
175/usr/sbin/ngctl -f- <<-SEQ
176	mkpeer ipfw: patch 200 in
177	name ipfw:200 ttl_add
178	msg ttl_add: setconfig { count=1 csum_flags=1 ops=[	\e
179		{ mode=2 value=3 length=1 offset=8 } ] }
180SEQ
181/sbin/ipfw add 150 netgraph 200 ip from any to simplex.remote.net
182.Ed
183.Pp
184Here the
185.Dq Li ttl_add
186node of type
187.Nm
188is configured to add (mode
189.Dv NG_PATCH_MODE_ADD )
190a
191.Va value
192of 3 to a one-byte TTL field, which is 9th byte of IP packet header.
193.Pp
194Another example would be two consecutive modifications of packet TOS
195field: say, you need to clear the
196.Dv IPTOS_THROUGHPUT
197bit and set the
198.Dv IPTOS_MINCOST
199bit.
200So you do:
201.Bd -literal -offset 4n
202/usr/sbin/ngctl -f- <<-SEQ
203	mkpeer ipfw: patch 300 in
204	name ipfw:300 tos_chg
205	msg tos_chg: setconfig { count=2 csum_flags=1 ops=[	\e
206		{ mode=7 value=0xf7 length=1 offset=1 }		\e
207		{ mode=8 value=0x02 length=1 offset=1 } ] }
208SEQ
209/sbin/ipfw add 160 netgraph 300 ip from any to any not dst-port 80
210.Ed
211.Pp
212This first does
213.Dv NG_PATCH_MODE_AND
214clearing the fourth bit and then
215.Dv NG_PATCH_MODE_OR
216setting the third bit.
217.Pp
218In both examples the
219.Va csum_flags
220field indicates that IP checksum (but not TCP or UDP checksum) should be
221recalculated before transmit.
222.Pp
223Note: one should ensure that packets are returned to ipfw after processing
224inside
225.Xr netgraph 4 ,
226by setting appropriate
227.Xr sysctl 8
228variable:
229.Bd -literal -offset 4n
230sysctl net.inet.ip.fw.one_pass=0
231.Ed
232.Sh SEE ALSO
233.Xr netgraph 4 ,
234.Xr ng_ipfw 4 ,
235.Xr ngctl 8
236.Sh HISTORY
237The
238.Nm
239node type was implemented in
240.Fx 8.1 .
241.Sh AUTHORS
242.An "Maxim Ignatenko" Aq gelraen.ua@gmail.com .
243.Pp
244Relative offset code by
245.An "DMitry Vagin"
246.Pp
247This manual page was written by
248.An "Vadim Goncharov" Aq vadimnuclight@tpu.ru .
249.Sh BUGS
250The node blindly tries to apply every patching operation to each packet
251(except those which offset if greater than length of the packet),
252so be sure that you supply only the right packets to it (e.g. changing
253bytes in the ARP packets meant to be in IP header could corrupt
254them and make your machine unreachable from the network).
255.Pp
256.Em !!! WARNING !!!
257.Pp
258The output path of the IP stack assumes correct fields and lengths in the
259packets - changing them by to incorrect values can cause
260unpredictable results including kernel panics.
261