xref: /freebsd/share/man/man4/msk.4 (revision ab393e9548f8cc0ee28499c411963b798ebb38a5) 
1.\" Copyright (c) 2006 Pyun YongHyeon
2.\" All rights reserved.
3.\"
4.\" Redistribution and use in source and binary forms, with or without
5.\" modification, are permitted provided that the following conditions
6.\" are met:
7.\" 1. Redistributions of source code must retain the above copyright
8.\"    notice, this list of conditions and the following disclaimer.
9.\" 2. Redistributions in binary form must reproduce the above copyright
10.\"    notice, this list of conditions and the following disclaimer in the
11.\"    documentation and/or other materials provided with the distribution.
12.\"
13.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
14.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
15.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
16.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
17.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
18.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
19.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
20.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
21.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
22.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
23.\" SUCH DAMAGE.
24.\"
25.Dd May 23, 2011
26.Dt MSK 4
27.Os
28.Sh NAME
29.Nm msk
30.Nd Marvell/SysKonnect Yukon II Gigabit Ethernet adapter driver
31.Sh SYNOPSIS
32To compile this driver into the kernel,
33place the following lines in your
34kernel configuration file:
35.Bd -ragged -offset indent
36.Cd "device miibus"
37.Cd "device msk"
38.Ed
39.Pp
40Alternatively, to load the driver as a
41module at boot time, place the following line in
42.Xr loader.conf 5 :
43.Bd -literal -offset indent
44if_msk_load="YES"
45.Ed
46.Sh DESCRIPTION
47The
48.Nm
49device driver provides support for various NICs based on the
50Marvell/SysKonnect Yukon II Gigabit Ethernet controller chip.
51.Pp
52All NICs supported by the
53.Nm
54driver have TCP/UDP/IP checksum offload for transmit, TCP
55segmentation offload (TSO), hardware VLAN tag stripping/insertion
56features and an interrupt moderation mechanism as well as a 64-bit
57multicast hash filter.
58The Yukon II supports TBI (ten bit interface) and GMII
59transceivers, which means it can be used with either copper or
601000baseX fiber applications.
61.Pp
62The Yukon II also supports Jumbo Frames (up to 9022 bytes), which can be
63configured via the interface MTU setting.
64Selecting an MTU larger than 1500 bytes with the
65.Xr ifconfig 8
66utility configures the adapter to receive and transmit Jumbo Frames.
67.Pp
68The
69.Nm
70driver supports the following media types:
71.Bl -tag -width ".Cm 10baseT/UTP"
72.It Cm autoselect
73Enable autoselection of the media type and options.
74The user can manually override
75the autoselected mode by adding media options to
76.Xr rc.conf 5 .
77.It Cm 10baseT/UTP
78Set 10Mbps operation.
79The
80.Xr ifconfig 8
81.Cm mediaopt
82option can also be used to select either
83.Cm full-duplex
84or
85.Cm half-duplex
86modes.
87.It Cm 100baseTX
88Set 100Mbps (Fast Ethernet) operation.
89The
90.Xr ifconfig 8
91.Cm mediaopt
92option can also be used to select either
93.Cm full-duplex
94or
95.Cm half-duplex
96modes.
97.It Cm 1000baseTX
98Set 1000baseTX operation over twisted pair.
99The
100.Xr ifconfig 8
101.Cm mediaopt
102option can also be used to select either
103.Cm full-duplex
104or
105.Cm half-duplex
106modes.
107.It Cm 1000baseSX
108Set 1000Mbps (Gigabit Ethernet) operation.
109Both
110.Cm full-duplex
111and
112.Cm half-duplex
113modes are supported.
114.El
115.Pp
116The
117.Nm
118driver supports the following media options:
119.Bl -tag -width ".Cm full-duplex"
120.It Cm full-duplex
121Force full duplex operation.
122.It Cm half-duplex
123Force half duplex operation.
124.El
125.Pp
126For more information on configuring this device, see
127.Xr ifconfig 8 .
128.Sh HARDWARE
129The
130.Nm
131driver provides support for various NICs based on the Marvell/SysKonnect
132Yukon II based Gigabit Ethernet controller chips, including:
133.Pp
134.Bl -bullet -compact
135.It
136D-Link 550SX Gigabit Ethernet
137.It
138D-Link 560SX Gigabit Ethernet
139.It
140D-Link 560T Gigabit Ethernet
141.It
142Marvell Yukon 88E8021CU Gigabit Ethernet
143.It
144Marvell Yukon 88E8021 SX/LX Gigabit Ethernet
145.It
146Marvell Yukon 88E8022CU Gigabit Ethernet
147.It
148Marvell Yukon 88E8022 SX/LX Gigabit Ethernet
149.It
150Marvell Yukon 88E8061CU Gigabit Ethernet
151.It
152Marvell Yukon 88E8061 SX/LX Gigabit Ethernet
153.It
154Marvell Yukon 88E8062CU Gigabit Ethernet
155.It
156Marvell Yukon 88E8062 SX/LX Gigabit Ethernet
157.It
158Marvell Yukon 88E8035 Fast Ethernet
159.It
160Marvell Yukon 88E8036 Fast Ethernet
161.It
162Marvell Yukon 88E8038 Fast Ethernet
163.It
164Marvell Yukon 88E8039 Fast Ethernet
165.It
166Marvell Yukon 88E8040 Fast Ethernet
167.It
168Marvell Yukon 88E8040T Fast Ethernet
169.It
170Marvell Yukon 88E8042 Fast Ethernet
171.It
172Marvell Yukon 88E8048 Fast Ethernet
173.It
174Marvell Yukon 88E8050 Gigabit Ethernet
175.It
176Marvell Yukon 88E8052 Gigabit Ethernet
177.It
178Marvell Yukon 88E8053 Gigabit Ethernet
179.It
180Marvell Yukon 88E8055 Gigabit Ethernet
181.It
182Marvell Yukon 88E8056 Gigabit Ethernet
183.It
184Marvell Yukon 88E8057 Gigabit Ethernet
185.It
186Marvell Yukon 88E8058 Gigabit Ethernet
187.It
188Marvell Yukon 88E8059 Gigabit Ethernet
189.It
190Marvell Yukon 88E8070 Gigabit Ethernet
191.It
192Marvell Yukon 88E8071 Gigabit Ethernet
193.It
194Marvell Yukon 88E8072 Gigabit Ethernet
195.It
196Marvell Yukon 88E8075 Gigabit Ethernet
197.It
198SysKonnect SK-9Sxx Gigabit Ethernet
199.It
200SysKonnect SK-9Exx Gigabit Ethernet
201.El
202.Sh LOADER TUNABLES
203Tunables can be set at the
204.Xr loader 8
205prompt before booting the kernel or stored in
206.Xr loader.conf 5 .
207.Bl -tag -width indent
208.It Va hw.msk.msi_disable
209This tunable disables MSI support on the Ethernet hardware.
210The default value is 0.
211.El
212.Sh SYSCTL VARIABLES
213The following variables are available as both
214.Xr sysctl 8
215variables and
216.Xr loader 8
217tunables:
218.Bl -tag -width indent
219.It Va dev.mskc.%d.int_holdoff
220Maximum number of time to delay interrupts.
221The valid range is 0 to 34359738 for 125MHz clock in units of 1us,
222the default is 100 (100us).
223The interface need to be brought down and up again before a change
224takes effect.
225.It Va dev.mskc.%d.process_limit
226Maximum amount of Rx events to be processed in the event loop before
227rescheduling a taskqueue.
228The accepted range is 30 to 256, the default value is 128 events.
229The interface does not need to be brought down and up again before
230a change takes effect.
231.El
232.Sh SEE ALSO
233.Xr altq 4 ,
234.Xr arp 4 ,
235.Xr miibus 4 ,
236.Xr netintro 4 ,
237.Xr ng_ether 4 ,
238.Xr vlan 4 ,
239.Xr ifconfig 8
240.Sh HISTORY
241The
242.Nm
243driver was written by
244.An Pyun YongHyeon Aq Mt yongari@FreeBSD.org
245and it is based on
246.Xr sk 4
247and Marvell's
248.Fx
249driver.
250It first appeared in
251.Fx 7.0
252and
253.Fx 6.3 .
254