1.\" Copyright (c) 2008 Pyun YongHyeon 2.\" All rights reserved. 3.\" 4.\" Redistribution and use in source and binary forms, with or without 5.\" modification, are permitted provided that the following conditions 6.\" are met: 7.\" 1. Redistributions of source code must retain the above copyright 8.\" notice, this list of conditions and the following disclaimer. 9.\" 2. Redistributions in binary form must reproduce the above copyright 10.\" notice, this list of conditions and the following disclaimer in the 11.\" documentation and/or other materials provided with the distribution. 12.\" 13.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 14.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 15.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 16.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 17.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 18.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 19.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 20.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 21.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 22.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 23.\" SUCH DAMAGE. 24.\" 25.\" $FreeBSD$ 26.\" 27.Dd May 27, 2008 28.Dt JME 4 29.Os 30.Sh NAME 31.Nm jme 32.Nd JMicron Gigabit/Fast Ethernet driver 33.Sh SYNOPSIS 34To compile this driver into the kernel, 35place the following lines in your 36kernel configuration file: 37.Bd -ragged -offset indent 38.Cd "device miibus" 39.Cd "device jme" 40.Ed 41.Pp 42Alternatively, to load the driver as a 43module at boot time, place the following line in 44.Xr loader.conf 5 : 45.Bd -literal -offset indent 46if_jme_load="YES" 47.Ed 48.Sh DESCRIPTION 49The 50.Nm 51device driver provides support for JMicron JMC250 PCI Express 52Gigabit Ethernet controllers and JMicron JMC260 PCI Express Fast 53Ethernet controllers. 54.Pp 55All LOMs supported by the 56.Nm 57driver have TCP/UDP/IP checksum offload for both transmit and receive, 58TCP segmentation offload (TSO), hardware VLAN tag stripping/insertion 59features, Wake On Lan (WOL) and an interrupt coalescing/moderation 60mechanism as well as a 64-bit multicast hash filter. 61.Pp 62The JMC250 also supports Jumbo Frames (up to 9216 bytes), which can be 63configured via the interface MTU setting. 64Selecting an MTU larger than 1500 bytes with the 65.Xr ifconfig 8 66utility configures the adapter to receive and transmit Jumbo Frames. 67.Pp 68The 69.Nm 70driver supports the following media types: 71.Bl -tag -width ".Cm 10baseT/UTP" 72.It Cm autoselect 73Enable autoselection of the media type and options. 74The user can manually override 75the autoselected mode by adding media options to 76.Xr rc.conf 5 . 77.It Cm 10baseT/UTP 78Set 10Mbps operation. 79.It Cm 100baseTX 80Set 100Mbps (Fast Ethernet) operation. 81.It Cm 1000baseTX 82Set 1000baseTX operation over twisted pair. 83.El 84.Pp 85The 86.Nm 87driver supports the following media options: 88.Bl -tag -width ".Cm full-duplex" 89.It Cm full-duplex 90Force full duplex operation. 91.It Cm half-duplex 92Force half duplex operation. 93.El 94.Pp 95For more information on configuring this device, see 96.Xr ifconfig 8 . 97.Sh LOADER TUNABLES 98Tunables can be set at the 99.Xr loader 8 100prompt before booting the kernel or stored in 101.Xr loader.conf 5 . 102.Bl -tag -width "xxxxxx" 103.It Va hw.jme.msi_disable 104This tunable disables MSI support on the Ethernet hardware. 105The default value is 0. 106.It Va hw.jme.msix_disable 107This tunable disables MSI-X support on the Ethernet hardware. 108The default value is 0. 109.El 110.Sh SYSCTL VARIABLES 111The following variables are available as both 112.Xr sysctl 8 113variables and 114.Xr loader 8 115tunables: 116.Bl -tag -width "xxxxxx" 117.It Va dev.jme.%d.tx_coal_to 118Maximum amount of time to delay for Tx completion interrupt in 119units of 1us. 120The accepted range is 1 to 65535, the default is 100 (100us). 121.It Va dev.jme.%d.tx_coal_pkt 122Maximum number of packets to fire Tx completion interrupt. 123The accepted range is 1 to 255, the default is 8. 124.It Va dev.jme.%d.rx_coal_to 125Maximum amount of time to delay for Rx completion interrupt in 126units of 1us. 127The accepted range is 1 to 65535, the default is 100 (100us). 128.It Va dev.jme.%d.rx_coal_pkt 129Maximum number of packets to fire Rx completion interrupt. 130The accepted range is 1 to 255, the default is 2. 131.It Va dev.jme.%d.process_limit 132Maximum amount of Rx events to be processed in the event loop before 133rescheduling a taskqueue. 134The accepted range is 10 to 255, the default value is 128 events. 135The interface does not need to be brought down and up again before 136a change takes effect. 137.El 138.Sh SEE ALSO 139.Xr altq 4 , 140.Xr arp 4 , 141.Xr miibus 4 , 142.Xr netintro 4 , 143.Xr ng_ether 4 , 144.Xr vlan 4 , 145.Xr ifconfig 8 146.Sh HISTORY 147The 148.Nm 149driver was written by 150.An Pyun YongHyeon 151.Aq yongari@FreeBSD.org . 152It first appeared in 153.Fx 7.1 . 154