1.\" Copyright (c) 2014 Gavin Atkinson 2.\" All rights reserved. 3.\" 4.\" Redistribution and use in source and binary forms, with or without 5.\" modification, are permitted provided that the following conditions 6.\" are met: 7.\" 8.\" - Redistributions of source code must retain the above copyright 9.\" notice, this list of conditions and the following disclaimer. 10.\" - Redistributions in binary form must reproduce the above 11.\" copyright notice, this list of conditions and the following 12.\" disclaimer in the documentation and/or other materials provided 13.\" with the distribution. 14.\" 15.\" THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 16.\" "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 17.\" LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS 18.\" FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE 19.\" COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, 20.\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, 21.\" BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 22.\" LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 23.\" CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 24.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN 25.\" ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 26.\" POSSIBILITY OF SUCH DAMAGE. 27.\" 28.\" $FreeBSD$ 29.\" 30.Dd May 26, 2019 31.Dt IPHETH 4 32.Os 33.Sh NAME 34.Nm ipheth 35.Nd "USB Apple iPhone/iPad tethered Ethernet driver" 36.Sh SYNOPSIS 37To load the driver as a module at boot time, place the 38following line in 39.Xr loader.conf 5 : 40.Bd -literal -offset indent 41if_ipheth_load="YES" 42.Ed 43.Pp 44Alternatively, to compile this driver into the kernel, place the 45following lines in your kernel configuration file: 46.Bd -ragged -offset indent 47.Cd "device uhci" 48.Cd "device ohci" 49.Cd "device usb" 50.Cd "device miibus" 51.Cd "device uether" 52.Cd "device ipheth" 53.Ed 54.Sh DESCRIPTION 55The 56.Nm 57driver provides support for network access through Apple 58iPhone and iPad devices, often referred to as USB tethering. 59.Pp 60.Nm 61should work with any Apple iPhone or iPad device. 62In most cases this must be explicitly enabled on the device first. 63.Pp 64For more information on configuring this device, see 65.Xr ifconfig 8 . 66The device does not support different media types or options. 67.Sh HARDWARE 68The following devices are supported by the 69.Nm 70driver: 71.Pp 72.Bl -bullet -compact 73.It 74Apple iPhone tethering (all models) 75.It 76Apple iPad tethering (all models) 77.El 78.Sh EXAMPLES 79.Bl -tag -width 0n 80.It Sy Example 1\&: No Manual Configuration 81.Pp 82The following example shows how to manually configure network access on a 83device that is not automatically recognized. 84.Pp 85First, load the driver and find out the unit and the address of the USB 86Apple 87device: 88.Bd -literal -offset 2n 89.Li # Ic kldload ipheth 90.Li # Ic usbconfig | grep Apple 91ugen0.2: <Apple Inc. iPhone> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (500mA) 92.Ed 93.Pp 94In this example, the unit and the address of the device is 0.2 95.Pq Dq Li ugen0.2 , 96and its configuration index is 0 97.Pq Dq Li cfg=0 . 98.Pp 99Secondly, check what other configurations are available for the device: 100.Bd -literal -offset 2n 101.Li # Ic usbconfig 0.2 dump_all_config_desc | awk '/^ Conf/{print} /iConf/{print}' 102 Configuration index 0 103 iConfiguration = 0x0005 <PTP> 104 Configuration index 1 105 iConfiguration = 0x0006 <iPod USB Interface> 106 Configuration index 2 107 iConfiguration = 0x0007 <PTP + Apple Mobile Device> 108 Configuration index 3 109 iConfiguration = 0x0008 <PTP + Apple Mobile Device + Apple USB Ethernet> 110.Ed 111.Pp 112In this example, there are 4 different configurations available. 113The configuration with index 3 seems to be related to Ethernet. 114It is time to configure the device: 115.Bd -literal -offset 2n 116.Li # Ic usbconfig 0.2 set_config 3 117.Li # Ic usbconfig | grep 'Apple.*cfg=3' 118ugen0.2: <Apple Inc. iPhone> at usbus0, cfg=3 md=HOST spd=HIGH (480Mbps) pwr=ON (500mA) 119.Ed 120.Pp 121At this point the Apple device should ask whether the 122.Fx 123machine can be trusted 124.Po Dq Mobile Data 125has to be on 126.Pc . 127.Pp 128A new 129.Em ue 130USB Ethernet interface should become available: 131.Bd -literal -offset 2n 132.Li # Ic dmesg | grep 'ue[0-9]' 133ue0: <USB Ethernet> on ipheth0 134ue0: bpf attached 135ue0: Ethernet address: 4e:7c:5f:2c:5f:7a 136.Ed 137.Pp 138At this point it might be necessary to run 139.Xr usbmuxd 1 140.Po available in 141.Xr ports 7 142at 143.Pa comms/usbmuxd 144.Pc : 145.Bd -literal -offset 2n 146.Li # Ic usbmuxd --enable-exit --foreground --user root --verbose 147.Ed 148.Pp 149Now it is time to configure the network interface: 150.Bd -literal -offset 2n 151.Li # Ic sysrc ifconfig_ue0="SYNCDHCP" 152ifconfig_ue0: -> SYNCDHCP 153.Li # Ic service netif restart ue0 154.Ed 155.Pp 156That is it. 157The machine should now be connected to the network via USB tethering. 158.El 159.Sh SEE ALSO 160.Xr arp 4 , 161.Xr cdce 4 , 162.Xr cdceem 4 , 163.Xr intro 4 , 164.Xr netintro 4 , 165.Xr urndis 4 , 166.Xr usb 4 , 167.Xr ifconfig 8 , 168.Xr usbconfig 8 169.Sh HISTORY 170The 171.Nm 172device driver first appeared in 173.Fx 8.2 . 174.Sh AUTHORS 175.An -nosplit 176The 177.Nm 178driver was written by 179.An Hans Petter Selasky Aq Mt hselasky@FreeBSD.org . 180.Sh BUGS 181Some devices are not recognized automatically and may need to be manually 182configured to use an alternative configuration with the 183.Xr usbconfig 8 184utility. 185See 186.Sx EXAMPLES 187for workarounds. 188