xref: /freebsd/share/man/man4/icmp6.4 (revision 42b388439bd3795e09258c57a74ce9eec3651c7b)
1.\"	$KAME: icmp6.4,v 1.6 2004/12/27 05:30:56 itojun Exp $
2.\"	$OpenBSD: icmp6.4,v 1.19 2004/12/23 20:33:03 jaredy Exp $
3.\"
4.\" Copyright (c) 1986, 1991, 1993
5.\"     The Regents of the University of California.  All rights reserved.
6.\"
7.\" Redistribution and use in source and binary forms, with or without
8.\" modification, are permitted provided that the following conditions
9.\" are met:
10.\" 1. Redistributions of source code must retain the above copyright
11.\"    notice, this list of conditions and the following disclaimer.
12.\" 2. Redistributions in binary form must reproduce the above copyright
13.\"    notice, this list of conditions and the following disclaimer in the
14.\"    documentation and/or other materials provided with the distribution.
15.\" 3. Neither the name of the University nor the names of its contributors
16.\"    may be used to endorse or promote products derived from this software
17.\"    without specific prior written permission.
18.\"
19.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
20.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
21.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
22.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
23.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
24.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
25.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
26.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
27.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
28.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
29.\" SUCH DAMAGE.
30.\"
31.\" $FreeBSD$
32.\"
33.Dd November 1, 2018
34.Dt ICMP6 4
35.Os
36.Sh NAME
37.Nm icmp6
38.Nd Internet Control Message Protocol for IPv6
39.Sh SYNOPSIS
40.In sys/socket.h
41.In netinet/in.h
42.In netinet/icmp6.h
43.Ft int
44.Fn socket AF_INET6 SOCK_RAW IPPROTO_ICMPV6
45.Sh DESCRIPTION
46ICMPv6 is the error and control message protocol used by IPv6 and the
47IPv6 protocol family (see
48.Xr ip6 4
49and
50.Xr inet6 4 ) .
51It may be accessed through a
52.Dq raw socket
53for network monitoring and diagnostic functions.
54.Pp
55The
56.Fa proto
57parameter to the
58.Xr socket 2
59call to create an ICMPv6 socket may be obtained from
60.Xr getprotobyname 3 .
61ICMPv6 sockets are connectionless, and are normally used with the
62.Xr sendto 2
63and
64.Xr recvfrom 2
65calls, though the
66.Xr connect 2
67call may also be used to fix the destination for future packets
68(in which case
69.Xr read 2
70or
71.Xr recv 2
72and
73.Xr write 2
74or
75.Xr send 2
76system calls may be used).
77.Pp
78Outgoing packets automatically have an IPv6 header prepended to them
79(based on the destination address).
80Incoming packets on the socket are received with the IPv6 header and any
81extension headers removed.
82.Ss Types
83ICMPv6 messages are classified according to the type and code fields
84present in the ICMPv6 header.
85The abbreviations for the types and codes may be used in rules in
86.Xr pf.conf 5 .
87The following types are defined:
88.Bl -column x xxxxxxxxxxxx -offset indent
89.It Sy Num Ta Sy Abbrev. Ta Sy Description
90.It 1 Ta unreach Ta "Destination unreachable"
91.It 2 Ta toobig Ta "Packet too big"
92.It 3 Ta timex Ta "Time exceeded"
93.It 4 Ta paramprob Ta "Invalid IPv6 header"
94.It 128 Ta echoreq Ta "Echo service request"
95.It 129 Ta echorep Ta "Echo service reply"
96.It 130 Ta groupqry Ta "Group membership query"
97.It 130 Ta listqry Ta "Multicast listener query"
98.It 131 Ta grouprep Ta "Group membership report"
99.It 131 Ta listenrep Ta "Multicast listener report"
100.It 132 Ta groupterm Ta "Group membership termination"
101.It 132 Ta listendone Ta "Multicast listener done"
102.It 133 Ta routersol Ta "Router solicitation"
103.It 134 Ta routeradv Ta "Router advertisement"
104.It 135 Ta neighbrsol Ta "Neighbor solicitation"
105.It 136 Ta neighbradv Ta "Neighbor advertisement"
106.It 137 Ta redir Ta "Shorter route exists"
107.It 138 Ta routrrenum Ta "Route renumbering"
108.It 139 Ta fqdnreq Ta "FQDN query"
109.It 139 Ta niqry Ta "Node information query"
110.It 139 Ta wrureq Ta "Who-are-you request"
111.It 140 Ta fqdnrep Ta "FQDN reply"
112.It 140 Ta nirep Ta "Node information reply"
113.It 140 Ta wrurep Ta "Who-are-you reply"
114.It 200 Ta mtraceresp Ta "mtrace response"
115.It 201 Ta mtrace Ta "mtrace messages"
116.El
117.Pp
118The following codes are defined:
119.Bl -column x xxxxxxxxxxxx xxxxxxxx -offset indent
120.It Sy Num Ta Sy Abbrev. Ta Sy Type Ta
121.Sy Description
122.It 0 Ta noroute-unr Ta unreach Ta "No route to destination"
123.It 1 Ta admin-unr Ta unreach Ta "Administratively prohibited"
124.It 2 Ta beyond-unr Ta unreach Ta "Beyond scope of source address"
125.It 2 Ta notnbr-unr Ta unreach Ta "Not a neighbor (obsolete)"
126.It 3 Ta addr-unr Ta unreach Ta "Address unreachable"
127.It 4 Ta port-unr Ta unreach Ta "Port unreachable"
128.It 0 Ta transit Ta timex Ta "Time exceeded in transit"
129.It 1 Ta reassemb Ta timex Ta "Time exceeded in reassembly"
130.It 0 Ta badhead Ta paramprob Ta "Erroneous header field"
131.It 1 Ta nxthdr Ta paramprob Ta "Unrecognized next header"
132.It 2 Ta "" Ta redir Ta "Unrecognized option"
133.It 0 Ta redironlink Ta redir Ta "Redirection to on-link node"
134.It 1 Ta redirrouter Ta redir Ta "Redirection to better router"
135.El
136.Ss Headers
137All ICMPv6 messages are prefixed with an ICMPv6 header.
138This header corresponds to the
139.Vt icmp6_hdr
140structure and has the following definition:
141.Bd -literal -offset indent
142struct icmp6_hdr {
143	uint8_t  icmp6_type;	/* type field */
144	uint8_t  icmp6_code;	/* code field */
145	uint16_t icmp6_cksum;	/* checksum field */
146	union {
147		uint32_t icmp6_un_data32[1]; /* type-specific */
148		uint16_t icmp6_un_data16[2]; /* type-specific */
149		uint8_t  icmp6_un_data8[4];  /* type-specific */
150	} icmp6_dataun;
151} __packed;
152
153#define icmp6_data32	icmp6_dataun.icmp6_un_data32
154#define icmp6_data16	icmp6_dataun.icmp6_un_data16
155#define icmp6_data8	icmp6_dataun.icmp6_un_data8
156#define icmp6_pptr	icmp6_data32[0]	/* parameter prob */
157#define icmp6_mtu	icmp6_data32[0]	/* packet too big */
158#define icmp6_id	icmp6_data16[0]	/* echo request/reply */
159#define icmp6_seq	icmp6_data16[1]	/* echo request/reply */
160#define icmp6_maxdelay	icmp6_data16[0]	/* mcast group membership*/
161.Ed
162.Pp
163.Va icmp6_type
164describes the type of the message.
165Suitable values are defined in
166.Aq Pa netinet/icmp6.h .
167.Va icmp6_code
168describes the sub-type of the message and depends on
169.Va icmp6_type .
170.Va icmp6_cksum
171contains the checksum for the message and is filled in by the
172kernel on outgoing messages.
173The other fields are used for type-specific purposes.
174.Ss Filters
175Because of the extra functionality of ICMPv6 in comparison to ICMPv4,
176a larger number of messages may be potentially received on an ICMPv6
177socket.
178Input filters may therefore be used to restrict input to a subset of the
179incoming ICMPv6 messages so only interesting messages are returned by the
180.Xr recv 2
181family of calls to an application.
182.Pp
183The
184.Vt icmp6_filter
185structure may be used to refine the input message set according to the
186ICMPv6 type.
187By default, all messages types are allowed on newly created raw ICMPv6
188sockets.
189The following macros may be used to refine the input set:
190.Bl -tag -width Ds
191.It Ft void Fn ICMP6_FILTER_SETPASSALL "struct icmp6_filter *filterp"
192Allow all incoming messages.
193.Va filterp
194is modified to allow all message types.
195.It Ft void Fn ICMP6_FILTER_SETBLOCKALL "struct icmp6_filter *filterp"
196Ignore all incoming messages.
197.Va filterp
198is modified to ignore all message types.
199.It Xo
200.Ft void
201.Fn ICMP6_FILTER_SETPASS "int type" "struct icmp6_filter *filterp"
202.Xc
203Allow ICMPv6 messages with the given
204.Fa type .
205.Va filterp
206is modified to allow such messages.
207.It Xo
208.Ft void
209.Fn ICMP6_FILTER_SETBLOCK "int type" "struct icmp6_filter *filterp"
210.Xc
211Ignore ICMPv6 messages with the given
212.Fa type .
213.Va filterp
214is modified to ignore such messages.
215.It Xo
216.Ft int
217.Fn ICMP6_FILTER_WILLPASS "int type" "const struct icmp6_filter *filterp"
218.Xc
219Determine if the given filter will allow an ICMPv6 message of the given
220type.
221.It Xo
222.Ft int
223.Fn ICMP6_FILTER_WILLBLOCK "int type" "const struct icmp6_filter *filterp"
224.Xc
225Determine if the given filter will ignore an ICMPv6 message of the given
226type.
227.El
228.Pp
229The
230.Xr getsockopt 2
231and
232.Xr setsockopt 2
233calls may be used to obtain and install the filter on ICMPv6 sockets at
234option level
235.Dv IPPROTO_ICMPV6
236and name
237.Dv ICMP6_FILTER
238with a pointer to the
239.Vt icmp6_filter
240structure as the option value.
241.Sh SEE ALSO
242.Xr getsockopt 2 ,
243.Xr recv 2 ,
244.Xr send 2 ,
245.Xr setsockopt 2 ,
246.Xr socket 2 ,
247.Xr getprotobyname 3 ,
248.Xr inet6 4 ,
249.Xr ip6 4 ,
250.Xr netintro 4
251.Rs
252.%A W. Stevens
253.%A M. Thomas
254.%T Advanced Sockets API for IPv6
255.%N RFC 2292
256.%D February 1998
257.Re
258.Rs
259.%A A. Conta
260.%A S. Deering
261.%T "Internet Control Message Protocol (ICMPv6) for the Internet" \
262    "Protocol Version 6 (IPv6) Specification"
263.%N RFC 2463
264.%D December 1998
265.Re
266.Rs
267.%A W. Stevens
268.%A M. Thomas
269.%A E. Nordmark
270.%A T. Jinmei
271.%T "Advanced Sockets Application Program Interface (API) for IPv6"
272.%R RFC 3542
273.%D May 2003
274.Re
275.Rs
276.%A A. Conta
277.%A S. Deering
278.%A M. Gupta
279.%T "Internet Control Message Protocol (ICMPv6) for the Internet" \
280    "Protocol Version 6 (IPv6) Specification"
281.%R RFC 4443
282.%D March 2006
283.Re
284