xref: /freebsd/share/man/man4/hpet.4 (revision 7ef62cebc2f965b0f640263e179276928885e33d)
1.\" Copyright (c) 2010 Alexander Motin <mav@FreeBSD.org>
2.\" All rights reserved.
3.\"
4.\" Redistribution and use in source and binary forms, with or without
5.\" modification, are permitted provided that the following conditions
6.\" are met:
7.\" 1. Redistributions of source code must retain the above copyright
8.\"    notice, this list of conditions and the following disclaimer.
9.\" 2. Redistributions in binary form must reproduce the above copyright
10.\"    notice, this list of conditions and the following disclaimer in the
11.\"    documentation and/or other materials provided with the distribution.
12.\"
13.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
14.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
15.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
16.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
17.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
18.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
19.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
20.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
21.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
22.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
23.\" SUCH DAMAGE.
24.\"
25.\" $FreeBSD$
26.\"
27.Dd September 14, 2010
28.Dt HPET 4
29.Os
30.Sh NAME
31.Nm hpet
32.Nd High Precision Event Timer driver
33.Sh SYNOPSIS
34To compile this driver into the kernel,
35place the following lines in your
36kernel configuration file:
37.Bd -ragged -offset indent
38.Cd "device acpi"
39.Ed
40.Pp
41The following tunables are settable from the
42.Xr loader 8 :
43.Bl -ohang
44.It Va hint.hpet. Ns Ar X Ns Va .allowed_irqs
45is a 32bit mask.
46Each set bit allows driver to use respective IRQ,
47if BIOS also set respective capability bit in comparator's configuration
48register.
49Default value is 0xffff0000, except some known broken hardware.
50.It Va hint.hpet. Ns Ar X Ns Va .clock
51controls event timers functionality support.
52Setting to 0, disables it.
53Default value is 1.
54.It Va hint.hpet. Ns Ar X Ns Va .legacy_route
55controls "LegacyReplacement Route" mode.
56If enabled, HPET will steal IRQ0 of i8254 timer and IRQ8 of RTC.
57Before using it, make sure that respective
58drivers are not using interrupts, by setting also:
59.Bd -literal
60hint.attimer.0.clock=0
61hint.atrtc.0.clock=0
62.Ed
63Default value is 0.
64.It Va hint.hpet. Ns Ar X Ns Va .per_cpu
65controls how much per-CPU event timers should driver attempt to register.
66This functionality requires every comparator in a group to have own unshared
67IRQ, so it depends on hardware capabilities and interrupts configuration.
68Default value is 1.
69.El
70.Sh DESCRIPTION
71This driver uses High Precision Event Timer hardware (part of the chipset,
72usually enumerated via ACPI) to supply kernel with one time counter and
73several (usually from 3 to 8) event timers.
74This hardware includes single main counter with known increment frequency
75(10MHz or more), and several programmable comparators (optionally with
76automatic reload feature).
77When value of the main counter matches current value of any comparator,
78interrupt can be generated.
79Depending on hardware capabilities and configuration, interrupt can be
80delivered as regular I/O APIC interrupt (ISA or PCI) in range from 0 to 31,
81or as Front Side Bus interrupt, alike to PCI MSI interrupts, or in so called
82"LegacyReplacement Route" HPET can steal IRQ0 of i8254 and IRQ8 of the RTC.
83Interrupt can be either edge- or level-triggered.
84In last case they could be safely shared with PCI IRQs.
85Driver prefers to use FSB interrupts, if supported, to avoid sharing.
86If it is not possible, it uses single sharable IRQ from PCI range.
87Other modes (LegacyReplacement and ISA IRQs) require special care to setup,
88but could be configured manually via device hints.
89.Pp
90Event timers provided by the driver support both one-shot an periodic modes
91and irrelevant to CPU power states.
92.Pp
93Depending on hardware capabilities and configuration, driver can expose each
94comparator as separate event timer or group them into one or several per-CPU
95event timers.
96In last case interrupt of every of those comparators within
97group is bound to specific CPU core.
98This is possible only when each of these comparators has own unsharable IRQ.
99.Sh SEE ALSO
100.Xr acpi 4 ,
101.Xr apic 4 ,
102.Xr atrtc 4 ,
103.Xr attimer 4 ,
104.Xr eventtimers 4 ,
105.Xr timecounters 4
106.Sh HISTORY
107The
108.Nm
109driver first appeared in
110.Fx 6.3 .
111Support for event timers was added in
112.Fx 9.0 .
113