xref: /freebsd/share/man/man4/gre.4 (revision 6be3386466ab79a84b48429ae66244f21526d3df)
1.\" $NetBSD: gre.4,v 1.28 2002/06/10 02:49:35 itojun Exp $
2.\"
3.\" Copyright 1998 (c) The NetBSD Foundation, Inc.
4.\" All rights reserved.
5.\"
6.\" This code is derived from software contributed to The NetBSD Foundation
7.\" by Heiko W.Rupp <hwr@pilhuhn.de>
8.\"
9.\" Redistribution and use in source and binary forms, with or without
10.\" modification, are permitted provided that the following conditions
11.\" are met:
12.\" 1. Redistributions of source code must retain the above copyright
13.\"    notice, this list of conditions and the following disclaimer.
14.\" 2. Redistributions in binary form must reproduce the above copyright
15.\"    notice, this list of conditions and the following disclaimer in the
16.\"    documentation and/or other materials provided with the distribution.
17.\"
18.\" THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
19.\" ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
20.\" TO, THE  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
21.\" PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
22.\" BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
23.\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
24.\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
25.\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
26.\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
27.\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
28.\" POSSIBILITY OF SUCH DAMAGE.
29.\"
30.\" $FreeBSD$
31.\"
32.Dd August 21, 2020
33.Dt GRE 4
34.Os
35.Sh NAME
36.Nm gre
37.Nd encapsulating network device
38.Sh SYNOPSIS
39To compile the
40driver into the kernel, place the following line in the kernel
41configuration file:
42.Bd -ragged -offset indent
43.Cd "device gre"
44.Ed
45.Pp
46Alternatively, to load the
47driver as a module at boot time, place the following line in
48.Xr loader.conf 5 :
49.Bd -literal -offset indent
50if_gre_load="YES"
51.Ed
52.Sh DESCRIPTION
53The
54.Nm
55network interface pseudo device encapsulates datagrams
56into IP.
57These encapsulated datagrams are routed to a destination host,
58where they are decapsulated and further routed to their final destination.
59The
60.Dq tunnel
61appears to the inner datagrams as one hop.
62.Pp
63.Nm
64interfaces are dynamically created and destroyed with the
65.Xr ifconfig 8
66.Cm create
67and
68.Cm destroy
69subcommands.
70.Pp
71This driver corresponds to RFC 2784.
72Encapsulated datagrams are prepended an outer datagram and a GRE header.
73The GRE header specifies
74the type of the encapsulated datagram and thus allows for tunneling other
75protocols than IP.
76GRE mode is also the default tunnel mode on Cisco routers.
77.Nm
78also supports Cisco WCCP protocol, both version 1 and version 2.
79.Pp
80The
81.Nm
82interfaces support a number of additional parameters to the
83.Xr ifconfig 8 :
84.Bl -tag -width "enable_csum"
85.It Ar grekey
86Set the GRE key used for outgoing packets.
87A value of 0 disables the key option.
88.It Ar enable_csum
89Enables checksum calculation for outgoing packets.
90.It Ar enable_seq
91Enables use of sequence number field in the GRE header for outgoing packets.
92.It Ar udpencap
93Enables UDP-in-GRE encapsulation (see the
94.Sx GRE-IN-UDP ENCAPSULATION
95Section below for details).
96.It Ar udpport
97Set the source UDP port for outgoing packets.
98A value of 0 disables the persistence of source UDP port for outgoing packets.
99See the
100.Sx GRE-IN-UDP ENCAPSULATION
101Section below for details.
102.El
103.Sh GRE-IN-UDP ENCAPSULATION
104The
105.Nm
106supports GRE in UDP encapsulation as defined in RFC 8086.
107A GRE in UDP tunnel offers the possibility of better performance for
108load-balancing GRE traffic in transit networks.
109Encapsulating GRE in UDP enables use of the UDP source port to provide
110entropy to ECMP hashing.
111.Pp
112The GRE in UDP tunnel uses single value 4754 as UDP destination port.
113The UDP source port contains a 14-bit entropy value that is generated
114by the encapsulator to identify a flow for the encapsulated packet.
115The
116.Ar udpport
117option can be used to disable this behaviour and use single source UDP
118port value.
119The value of
120.Ar udpport
121should be within the ephemeral port range, i.e., 49152 to 65535 by default.
122.Pp
123Note that a GRE in UDP tunnel is unidirectional; the tunnel traffic is not
124expected to be returned back to the UDP source port values used to generate
125entropy.
126This may impact NAPT (Network Address Port Translator) middleboxes.
127If such tunnels are expected to be used on a path with a middlebox,
128the tunnel can be configured either to disable use of the UDP source port
129for entropy or to enable middleboxes to pass packets with UDP source port
130entropy.
131.Sh EXAMPLES
132.Bd -literal
133192.168.1.* --- Router A  -------tunnel-------- Router B --- 192.168.2.*
134                   \\                              /
135                    \\                            /
136                     +------ the Internet ------+
137.Ed
138.Pp
139Assuming router A has the (external) IP address A and the internal address
140192.168.1.1, while router B has external address B and internal address
141192.168.2.1, the following commands will configure the tunnel:
142.Pp
143On router A:
144.Bd -literal -offset indent
145ifconfig greN create
146ifconfig greN inet 192.168.1.1 192.168.2.1
147ifconfig greN inet tunnel A B
148route add -net 192.168.2 -netmask 255.255.255.0 192.168.2.1
149.Ed
150.Pp
151On router B:
152.Bd -literal -offset indent
153ifconfig greN create
154ifconfig greN inet 192.168.2.1 192.168.1.1
155ifconfig greN inet tunnel B A
156route add -net 192.168.1 -netmask 255.255.255.0 192.168.1.1
157.Ed
158.Pp
159In case when internal and external IP addresses are the same,
160different routing tables (FIB) should be used.
161The default FIB will be applied to IP packets before GRE encapsulation.
162After encapsulation GRE interface should set different FIB number to
163outgoing packet.
164Then different FIB will be applied to such encapsulated packets.
165According to this FIB packet should be routed to tunnel endpoint.
166.Bd -literal
167Host X -- Host A (198.51.100.1) ---tunnel--- Cisco D (203.0.113.1) -- Host E
168                   \\                                   /
169                    \\                                 /
170	             +----- Host B ----- Host C -----+
171                       (198.51.100.254)
172.Ed
173.Pp
174On Host A (FreeBSD):
175.Pp
176First of multiple FIBs should be configured via loader.conf:
177.Bd -literal -offset indent
178net.fibs=2
179net.add_addr_allfibs=0
180.Ed
181.Pp
182Then routes to the gateway and remote tunnel endpoint via this gateway
183should be added to the second FIB:
184.Bd -literal -offset indent
185route add -net 198.51.100.0 -netmask 255.255.255.0 -fib 1 -iface em0
186route add -host 203.0.113.1 -fib 1 198.51.100.254
187.Ed
188.Pp
189And GRE tunnel should be configured to change FIB for encapsulated packets:
190.Bd -literal -offset indent
191ifconfig greN create
192ifconfig greN inet 198.51.100.1 203.0.113.1
193ifconfig greN inet tunnel 198.51.100.1 203.0.113.1 tunnelfib 1
194.Ed
195.Sh NOTES
196The MTU of
197.Nm
198interfaces is set to 1476 by default, to match the value used by Cisco routers.
199This may not be an optimal value, depending on the link between the two tunnel
200endpoints.
201It can be adjusted via
202.Xr ifconfig 8 .
203.Pp
204For correct operation, the
205.Nm
206device needs a route to the decapsulating host that does not run over the tunnel,
207as this would be a loop.
208.Pp
209The kernel must be set to forward datagrams by setting the
210.Va net.inet.ip.forwarding
211.Xr sysctl 8
212variable to non-zero.
213.Pp
214By default,
215.Nm
216tunnels may not be nested.
217This behavior may be modified at runtime by setting the
218.Xr sysctl 8
219variable
220.Va net.link.gre.max_nesting
221to the desired level of nesting.
222.Sh SEE ALSO
223.Xr gif 4 ,
224.Xr inet 4 ,
225.Xr ip 4 ,
226.Xr me 4 ,
227.Xr netintro 4 ,
228.Xr protocols 5 ,
229.Xr ifconfig 8 ,
230.Xr sysctl 8
231.Sh STANDARDS
232.Rs
233.%A S. Hanks
234.%A "T. Li"
235.%A D. Farinacci
236.%A P. Traina
237.%D October 1994
238.%R RFC 1701
239.%T Generic Routing Encapsulation (GRE)
240.Re
241.Pp
242.Rs
243.%A S. Hanks
244.%A "T. Li"
245.%A D. Farinacci
246.%A P. Traina
247.%D October 1994
248.%R RFC 1702
249.%T Generic Routing Encapsulation over IPv4 networks
250.Re
251.Pp
252.Rs
253.%A D. Farinacci
254.%A "T. Li"
255.%A S. Hanks
256.%A D. Meyer
257.%A P. Traina
258.%D March 2000
259.%R RFC 2784
260.%T Generic Routing Encapsulation (GRE)
261.Re
262.Pp
263.Rs
264.%A G. Dommety
265.%D September 2000
266.%R RFC 2890
267.%T Key and Sequence Number Extensions to GRE
268.Re
269.Sh AUTHORS
270.An Andrey V. Elsukov Aq Mt ae@FreeBSD.org
271.An Heiko W.Rupp Aq Mt hwr@pilhuhn.de
272.Sh BUGS
273The current implementation uses the key only for outgoing packets.
274Incoming packets with a different key or without a key will be treated as if they
275would belong to this interface.
276.Pp
277The sequence number field also used only for outgoing packets.
278