xref: /freebsd/share/man/man4/em.4 (revision 38be29d321c1e041a1f27f53c123c9e8c6151df9)

.\" Copyright (c) 2001-2003, Intel Corporation
.\" All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions are met:
.\"
.\" 1. Redistributions of source code must retain the above copyright notice,
.\"    this list of conditions and the following disclaimer.
.\"
.\" 2. Redistributions in binary form must reproduce the above copyright
.\"    notice, this list of conditions and the following disclaimer in the
.\"    documentation and/or other materials provided with the distribution.
.\"
.\" 3. Neither the name of the Intel Corporation nor the names of its
.\"    contributors may be used to endorse or promote products derived from
.\"    this software without specific prior written permission.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
.\" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.\" ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
.\" LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
.\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
.\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
.\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
.\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
.\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
.\" POSSIBILITY OF SUCH DAMAGE.
.\"
.\" * Other names and brands may be claimed as the property of others.
.\"
.\" $FreeBSD$
.\"
.Dd August 16, 2015
.Dt EM 4
.Os
.Sh NAME
.Nm em
.Nd "Intel(R) PRO/1000 Gigabit Ethernet adapter driver"
.Sh SYNOPSIS
To compile this driver into the kernel,
place the following line in your
kernel configuration file:
.Bd -ragged -offset indent
.Cd "device em"
.Ed
.Pp
Optional multiqueue support is available via the following kernel
compile options:
.Bd -ragged -offset indent
.Cd "options EM_MULTIQUEUE"
.Ed
.Pp
Note:  Activating EM_MULTIQUEUE support is not supported by Intel.
.Pp
Alternatively, to load the driver as a
module at boot time, place the following line in
.Xr loader.conf 5 :
.Bd -literal -offset indent
if_em_load="YES"
.Ed
.Sh DESCRIPTION
The
.Nm
driver provides support for PCI Gigabit Ethernet adapters based on
the Intel 82540, 82541ER, 82541PI, 82542, 82543, 82544, 82545, 82546,
82546EB, 82546GB, 82547, 82571, 81572, 82573, and 82574 Ethernet
controller chips.
The driver supports Transmit/Receive checksum offload
and Jumbo Frames on all but 82542-based adapters.
Furthermore it supports TCP segmentation offload (TSO) on all adapters but
those based on the 82543, 82544 and 82547 controller chips.
The identification LEDs of the adapters supported by the
.Nm
driver can be controlled via the
.Xr led 4
API for localization purposes.
For further hardware information, see the
.Pa README
included with the driver.
.Pp
For questions related to hardware requirements,
refer to the documentation supplied with your Intel PRO/1000 adapter.
All hardware requirements listed apply to use with
.Fx .
.Pp
Support for Jumbo Frames is provided via the interface MTU setting.
Selecting an MTU larger than 1500 bytes with the
.Xr ifconfig 8
utility configures the adapter to receive and transmit Jumbo Frames.
The maximum MTU size for Jumbo Frames is 16114.
.Pp
This driver version supports VLANs.
The
.Nm
driver supports the following media types:
.Bl -tag -width ".Cm 10baseT/UTP"
.It Cm autoselect
Enables auto-negotiation for speed and duplex.
.It Cm 10baseT/UTP
Sets 10Mbps operation.
Use the
.Cm mediaopt
option to select
.Cm full-duplex
mode.
.It Cm 100baseTX
Sets 100Mbps operation.
Use the
.Cm mediaopt
option to select
.Cm full-duplex
mode.
.It Cm 1000baseSX
Sets 1000Mbps operation.
Only
.Cm full-duplex
mode is supported at this speed.
.It Cm 1000baseTX
Sets 1000Mbps operation.
Only
.Cm full-duplex
mode is supported at this speed.
.El
.Pp
The
.Nm
driver supports the following media options:
.Bl -tag -width ".Cm full-duplex"
.It Cm full-duplex
Forces full-duplex operation
.It Cm half-duplex
Forces half-duplex operation.
.El
.Pp
Only use
.Cm mediaopt
to set the driver to
.Cm full-duplex .
If
.Cm mediaopt
is not specified, the driver defaults to
.Cm half-duplex .
.Pp
For more information on configuring this device, see
.Xr ifconfig 8 .
.Sh HARDWARE
The
.Nm
driver supports Gigabit Ethernet adapters based on the Intel
82540, 82541ER, 82541PI, 82542, 82543, 82544, 82545, 82546, 82546EB,
82546GB, 82547, 82571, 82572, 82573, and 82574 controller chips:
.Pp
.Bl -bullet -compact
.It
Intel PRO/1000 CT Network Connection (82547)
.It
Intel PRO/1000 F Server Adapter (82543)
.It
Intel PRO/1000 Gigabit Server Adapter (82542)
.It
Intel PRO/1000 GT Desktop Adapter (82541PI)
.It
Intel PRO/1000 MF Dual Port Server Adapter (82546)
.It
Intel PRO/1000 MF Server Adapter (82545)
.It
Intel PRO/1000 MF Server Adapter (LX) (82545)
.It
Intel PRO/1000 MT Desktop Adapter (82540)
.It
Intel PRO/1000 MT Desktop Adapter (82541)
.It
Intel PRO/1000 MT Dual Port Server Adapter (82546)
.It
Intel PRO/1000 MT Quad Port Server Adapter (82546EB)
.It
Intel PRO/1000 MT Server Adapter (82545)
.It
Intel PRO/1000 PF Dual Port Server Adapter (82571)
.It
Intel PRO/1000 PF Quad Port Server Adapter (82571)
.It
Intel PRO/1000 PF Server Adapter (82572)
.It
Intel PRO/1000 PT Desktop Adapter (82572)
.It
Intel PRO/1000 PT Dual Port Server Adapter (82571)
.It
Intel PRO/1000 PT Quad Port Server Adapter (82571)
.It
Intel PRO/1000 PT Server Adapter (82572)
.It
Intel PRO/1000 T Desktop Adapter (82544)
.It
Intel PRO/1000 T Server Adapter (82543)
.It
Intel PRO/1000 XF Server Adapter (82544)
.It
Intel PRO/1000 XT Server Adapter (82544)
.El
.Sh LOADER TUNABLES
Tunables can be set at the
.Xr loader 8
prompt before booting the kernel or stored in
.Xr loader.conf 5 .
.Bl -tag -width indent
.It Va hw.em.disable_crc_stripping
Disable or enable hardware stripping of CRC field.
This is mostly useful on BMC/IPMI shared interfaces where stripping the CRC
causes remote access over IPMI to fail.
Default 0 (enabled).
.It Va hw.em.eee_setting
Disable or enable Energy Efficient Ethernet.
Default 1 (disabled).
.It Va hw.em.msix
Enable or disable MSI-X style interrupts.
Default 1 (enabled).
.It Va hw.em.smart_pwr_down
Enable or disable smart power down features on newer adapters.
Default 0 (disabled).
.It Va hw.em.sbp
Show bad packets when in promiscuous mode.
Default 0 (off).
.It Va hw.em.rxd
Number of receive descriptors allocated by the driver.
The default value is 1024 for adapters newer than 82547,
and 256 for older ones.
The 82542 and 82543-based adapters can handle up to 256 descriptors,
while others can have up to 4096.
.It Va hw.em.txd
Number of transmit descriptors allocated by the driver.
The default value is 1024 for adapters newer than 82547,
and 256 for older ones.
The 82542 and 82543-based adapters can handle up to 256 descriptors,
while others can have up to 4096.
.It Va hw.em.rx_int_delay
This value delays the generation of receive interrupts in units of
1.024 microseconds.
The default value is 0, since adapters may hang with this feature
being enabled.
.It Va hw.em.rx_abs_int_delay
If
.Va hw.em.rx_int_delay
is non-zero, this tunable limits the maximum delay in which a receive
interrupt is generated.
.It Va hw.em.tx_int_delay
This value delays the generation of transmit interrupts in units of
1.024 microseconds.
The default value is 64.
.It Va hw.em.tx_abs_int_delay
If
.Va hw.em.tx_int_delay
is non-zero, this tunable limits the maximum delay in which a transmit
interrupt is generated.
.It Va hw.em.num_queues
Number of hardware queues that will be configured on this adapter (maximum of 2)
Defaults to 1.
Only valid with kernel configuration
.Cd "options EM_MULTIQUEUE".
.El
.Sh FILES
.Bl -tag -width /dev/led/em*
.It Pa /dev/led/em*
identification LED device nodes
.El
.Sh EXAMPLES
Make the identification LED of em0 blink:
.Pp
.Dl "echo f2 > /dev/led/em0"
.Pp
Turn the identification LED of em0 off again:
.Pp
.Dl "echo 0 > /dev/led/em0"
.Sh DIAGNOSTICS
.Bl -diag
.It "em%d: Unable to allocate bus resource: memory"
A fatal initialization error has occurred.
.It "em%d: Unable to allocate bus resource: interrupt"
A fatal initialization error has occurred.
.It "em%d: watchdog timeout -- resetting"
The device has stopped responding to the network, or there is a problem with
the network connection (cable).
.El
.Sh SUPPORT
For general information and support,
go to the Intel support website at:
.Pa http://support.intel.com .
.Pp
If an issue is identified with the released source code on the supported kernel
with a supported adapter, email the specific information related to the
issue to
.Aq Mt freebsd@intel.com .
.Sh SEE ALSO
.Xr altq 4 ,
.Xr arp 4 ,
.Xr igb 4 ,
.Xr led 4 ,
.Xr netintro 4 ,
.Xr ng_ether 4 ,
.Xr polling 4 ,
.Xr vlan 4 ,
.Xr ifconfig 8
.Sh HISTORY
The
.Nm
device driver first appeared in
.Fx 4.4 .
.Sh AUTHORS
The
.Nm
driver was written by
.An Intel Corporation Aq Mt freebsd@intel.com .
.Sh BUGS
Activating EM_MULTIQUEUE support requires MSI-X features.