1.\" Copyright (c) 2001 Wind River Systems 2.\" Copyright (c) 1997, 1998, 1999, 2000, 2001 3.\" Bill Paul <wpaul@windriver.com>. All rights reserved. 4.\" 5.\" Redistribution and use in source and binary forms, with or without 6.\" modification, are permitted provided that the following conditions 7.\" are met: 8.\" 1. Redistributions of source code must retain the above copyright 9.\" notice, this list of conditions and the following disclaimer. 10.\" 2. Redistributions in binary form must reproduce the above copyright 11.\" notice, this list of conditions and the following disclaimer in the 12.\" documentation and/or other materials provided with the distribution. 13.\" 3. All advertising materials mentioning features or use of this software 14.\" must display the following acknowledgement: 15.\" This product includes software developed by Bill Paul. 16.\" 4. Neither the name of the author nor the names of any co-contributors 17.\" may be used to endorse or promote products derived from this software 18.\" without specific prior written permission. 19.\" 20.\" THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND 21.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 22.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 23.\" ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD 24.\" BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 25.\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 26.\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 27.\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 28.\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 29.\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 30.\" THE POSSIBILITY OF SUCH DAMAGE. 31.\" 32.\" $FreeBSD$ 33.\" 34.Dd January 19, 2012 35.Dt BGE 4 36.Os 37.Sh NAME 38.Nm bge 39.Nd "Broadcom BCM57xx/BCM590x Gigabit/Fast Ethernet driver" 40.Sh SYNOPSIS 41To compile this driver into the kernel, 42place the following lines in your 43kernel configuration file: 44.Bd -ragged -offset indent 45.Cd "device miibus" 46.Cd "device bge" 47.Ed 48.Pp 49Alternatively, to load the driver as a 50module at boot time, place the following line in 51.Xr loader.conf 5 : 52.Bd -literal -offset indent 53if_bge_load="YES" 54.Ed 55.Sh DESCRIPTION 56The 57.Nm 58driver provides support for various NICs based on the Broadcom BCM570x, 59571x, 572x, 575x, 576x, 578x, 5776x and 5778x Gigabit Ethernet controller 60chips and the 590x and 5779x Fast Ethernet controller chips. 61.Pp 62All of these NICs are capable of 10, 100 and 1000Mbps speeds over CAT5 63copper cable, except for the SysKonnect SK-9D41 which supports only 641000Mbps over multimode fiber. 65The BCM570x builds upon the technology of the Alteon Tigon II. 66It has two R4000 CPU cores and is PCI v2.2 and PCI-X v1.0 compliant. 67It supports IP, TCP 68and UDP checksum offload for both receive and transmit, 69multiple RX and TX DMA rings for QoS applications, rules-based 70receive filtering, and VLAN tag stripping/insertion as well as 71a 256-bit multicast hash filter. 72Additional features may be 73provided via value-add firmware updates. 74The BCM570x supports TBI (ten bit interface) and GMII 75transceivers, which means it can be used with either copper or 1000baseX 76fiber applications. 77Note however the device only supports a single 78speed in TBI mode. 79.Pp 80Most BCM5700-based cards also use the Broadcom BCM5401 or BCM5411 10/100/1000 81copper gigabit transceivers, 82which support autonegotiation of 10, 100 and 1000Mbps modes in 83full or half duplex. 84.Pp 85The BCM5700, BCM5701, BCM5702, BCM5703, BCM5704, BCM5714, BCM5717, BCM5719, 86BCM5720, BCM5780 and BCM57765 also support jumbo frames, which can be 87configured via the interface MTU setting. 88Selecting an MTU larger than 1500 bytes with the 89.Xr ifconfig 8 90utility configures the adapter to receive and transmit jumbo frames. 91Using jumbo frames can greatly improve performance for certain tasks, 92such as file transfers and data streaming. 93.Pp 94The 95.Nm 96driver supports the following media types: 97.Bl -tag -width ".Cm 10baseT/UTP" 98.It Cm autoselect 99Enable autoselection of the media type and options. 100The user can manually override 101the autoselected mode by adding media options to 102.Xr rc.conf 5 . 103.It Cm 10baseT/UTP 104Set 10Mbps operation. 105The 106.Xr ifconfig 8 107.Ic mediaopt 108option can also be used to select either 109.Cm full-duplex 110or 111.Cm half-duplex 112modes. 113.It Cm 100baseTX 114Set 100Mbps (Fast Ethernet) operation. 115The 116.Xr ifconfig 8 117.Ic mediaopt 118option can also be used to select either 119.Cm full-duplex 120or 121.Cm half-duplex 122modes. 123.It Cm 1000baseTX 124Set 1000baseTX operation over twisted pair. 125Only 126.Cm full-duplex 127mode is supported. 128.It Cm 1000baseSX 129Set 1000Mbps (Gigabit Ethernet) operation. 130Both 131.Cm full-duplex 132and 133.Cm half-duplex 134modes are supported. 135.El 136.Pp 137The 138.Nm 139driver supports the following media options: 140.Bl -tag -width ".Cm full-duplex" 141.It Cm full-duplex 142Force full duplex operation. 143.It Cm half-duplex 144Force half duplex operation. 145.El 146.Pp 147For more information on configuring this device, see 148.Xr ifconfig 8 . 149.Sh HARDWARE 150The 151.Nm 152driver provides support for various NICs based on the Broadcom BCM570x 153family of Gigabit Ethernet controller chips, including the 154following: 155.Pp 156.Bl -bullet -compact 157.It 1583Com 3c996-SX (1000baseSX) 159.It 1603Com 3c996-T (10/100/1000baseTX) 161.It 162Dell PowerEdge 1750 integrated BCM5704C NIC (10/100/1000baseTX) 163.It 164Dell PowerEdge 2550 integrated BCM5700 NIC (10/100/1000baseTX) 165.It 166Dell PowerEdge 2650 integrated BCM5703 NIC (10/100/1000baseTX) 167.It 168Dell PowerEdge R200 integrated BCM5750 NIC (10/100/1000baseTX) 169.It 170Dell PowerEdge R300 integrated BCM5722 NIC (10/100/1000baseTX) 171.It 172IBM x235 server integrated BCM5703x NIC (10/100/1000baseTX) 173.It 174HP Compaq dc7600 integrated BCM5752 NIC (10/100/1000baseTX) 175.It 176HP ProLiant NC7760 embedded Gigabit NIC (10/100/1000baseTX) 177.It 178HP ProLiant NC7770 PCI-X Gigabit NIC (10/100/1000baseTX) 179.It 180HP ProLiant NC7771 PCI-X Gigabit NIC (10/100/1000baseTX) 181.It 182HP ProLiant NC7781 embedded PCI-X Gigabit NIC (10/100/1000baseTX) 183.It 184Netgear GA302T (10/100/1000baseTX) 185.It 186SysKonnect SK-9D21 (10/100/1000baseTX) 187.It 188SysKonnect SK-9D41 (1000baseSX) 189.El 190.Sh LOADER TUNABLES 191The following tunables can be set at the 192.Xr loader 8 193prompt before booting the kernel, or stored in 194.Xr loader.conf 5 . 195.Bl -tag -width indent 196.It Va hw.bge.allow_asf 197Allow the ASF feature for cooperating with IPMI. 198Can cause system lockup problems on a small number of systems. 199Enabled by default. 200.It Va dev.bge.%d.msi 201Non-zero value enables MSI support on the Ethernet hardware. 202The default value is 1. 203.El 204.Sh SYSCTL VARIABLES 205The following variables are available as both 206.Xr sysctl 8 207variables and 208.Xr loader 8 209tunables: 210.Bl -tag -width indent 211.It Va dev.bge.%d.forced_collapse 212Allow collapsing multiple transmit buffers into a single buffer 213to increase transmit performance with the cost of CPU cycles. 214The default value is 0 to disable transmit buffer collapsing. 215.It Va dev.bge.%d.forced_udpcsum 216Enable UDP transmit checksum offloading even if controller can generate 217UDP datagrams with checksum value 0. 218UDP datagrams with checksum value 0 can confuse receiver host as it means 219sender did not compute UDP checksum. 220The default value is 0 which disables UDP transmit checksum offloading. 221The interface need to be brought down and up again before a change takes 222effect. 223.El 224.Sh DIAGNOSTICS 225.Bl -diag 226.It "bge%d: couldn't map memory" 227A fatal initialization error has occurred. 228.It "bge%d: couldn't map ports" 229A fatal initialization error has occurred. 230.It "bge%d: couldn't map interrupt" 231A fatal initialization error has occurred. 232.It "bge%d: no memory for softc struct!" 233The driver failed to allocate memory for per-device instance information 234during initialization. 235.It "bge%d: failed to enable memory mapping!" 236The driver failed to initialize PCI shared memory mapping. 237This might 238happen if the card is not in a bus-master slot. 239.It "bge%d: no memory for jumbo buffers!" 240The driver failed to allocate memory for jumbo frames during 241initialization. 242.It "bge%d: watchdog timeout" 243The device has stopped responding to the network, or there is a problem with 244the network connection (cable). 245.El 246.Sh SEE ALSO 247.Xr altq 4 , 248.Xr arp 4 , 249.Xr miibus 4 , 250.Xr netintro 4 , 251.Xr ng_ether 4 , 252.Xr polling 4 , 253.Xr vlan 4 , 254.Xr ifconfig 8 255.Sh HISTORY 256The 257.Nm 258device driver first appeared in 259.Fx 4.5 . 260.Sh AUTHORS 261The 262.Nm 263driver was written by 264.An Bill Paul Aq wpaul@windriver.com . 265