1.\" Copyright (c) 2006 Broadcom Corporation 2.\" David Christensen <davidch@broadcom.com>. All rights reserved. 3.\" 4.\" Redistribution and use in source and binary forms, with or without 5.\" modification, are permitted provided that the following conditions 6.\" are met: 7.\" 8.\" 1. Redistributions of source code must retain the above copyright 9.\" notice, this list of conditions and the following disclaimer. 10.\" 2. Redistributions in binary form must reproduce the above copyright 11.\" notice, this list of conditions and the following disclaimer in the 12.\" documentation and/or other materials provided with the distribution. 13.\" 3. Neither the name of Broadcom Corporation nor the name of its contributors 14.\" may be used to endorse or promote products derived from this software 15.\" without specific prior written consent. 16.\" 17.\" THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS' 18.\" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 19.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 20.\" ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS 21.\" BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 22.\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 23.\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 24.\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 25.\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 26.\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 27.\" THE POSSIBILITY OF SUCH DAMAGE. 28.\" 29.\" $FreeBSD$ 30.\" 31.Dd February 9, 2007 32.Dt BCE 4 33.Os 34.Sh NAME 35.Nm bce 36.Nd "Broadcom NetXtreme II (BCM5706/BCM5708) PCI/PCIe Gigabit Ethernet adapter driver" 37.Sh SYNOPSIS 38To compile this driver into the kernel, 39place the following lines in your 40kernel configuration file: 41.Bd -ragged -offset indent 42.Cd "device miibus" 43.Cd "device bce" 44.Ed 45.Pp 46Alternatively, to load the driver as a 47module at boot time, place the following line in 48.Xr loader.conf 5 : 49.Bd -literal -offset indent 50if_bce_load="YES" 51.Ed 52.Sh DESCRIPTION 53The 54.Nm 55driver supports Broadcom's NetXtreme II product family, including the 56BCM5706 and BCM5708 Ethernet controllers. 57.Pp 58The NetXtreme II product family is composed of various Converged NIC (or CNIC) 59Ethernet controllers which support a TCP Offload Engine (TOE), Remote DMA (RDMA), 60and iSCSI acceleration, in addition to standard L2 Ethernet traffic, all on the 61same controller. 62The following features are supported in the 63.Nm 64driver under 65.Fx : 66.Pp 67.Bl -item -offset indent -compact 68.It 69IP/TCP/UDP checksum offload 70.It 71Jumbo frames (up to 9022 bytes) 72.It 73VLAN tag stripping 74.It 75Interrupt coalescing 76.It 7710/100/1000Mbps operation in full-duplex mode 78.It 7910/100Mbps operation in half-duplex mode 80.El 81.Pp 82The 83.Nm 84driver supports the following media types: 85.Bl -tag -width ".Cm 10baseT/UTP" 86.It Cm autoselect 87Enable autoselection of the media type and options. 88The user can manually override 89the autoselected mode by adding media options to 90.Xr rc.conf 5 . 91.It Cm 10baseT/UTP 92Set 10Mbps operation. 93The 94.Xr ifconfig 8 95.Cm mediaopt 96option can also be used to select either 97.Cm full-duplex 98or 99.Cm half-duplex 100modes. 101.It Cm 100baseTX 102Set 100Mbps (Fast Ethernet) operation. 103The 104.Xr ifconfig 8 105.Cm mediaopt 106option can also be used to select either 107.Cm full-duplex 108or 109.Cm half-duplex 110modes. 111.It Cm 1000baseTX 112Set 1000baseTX operation over twisted pair. 113Only 114.Cm full-duplex 115mode is supported. 116.El 117.Pp 118The 119.Nm 120driver supports the following media options: 121.Bl -tag -width ".Cm full-duplex" 122.It Cm full-duplex 123Force full duplex operation. 124.It Cm half-duplex 125Force half duplex operation. 126.El 127.Pp 128For more information on configuring this device, see 129.Xr ifconfig 8 . 130.Sh HARDWARE 131The 132.Nm 133driver provides support for various NICs based on the Broadcom NetXtreme II 134family of Gigabit Ethernet controllers, including the 135following: 136.Pp 137.Bl -bullet -compact 138.It 139HP NC370T Multifunction Gigabit Server Adapter 140.It 141HP NC370i Multifunction Gigabit Server Adapter 142.El 143.Sh DIAGNOSTICS 144.Bl -diag 145.It "bce%d: PCI memory allocation failed!" 146The driver has encountered a fatal initialization error. 147.It "bce%d: PCI map interrupt failed!" 148The driver has encountered a fatal initialization error. 149.It "bce%d: Unsupported controller revision (%c%d)" 150The driver does not support the controller revision in use. 151.It "bce%d: Controller initialization failed!" 152The driver has encountered a fatal initialization error. 153.It "bce%d: NVRAM test failed!" 154The driver could not access the controller NVRAM correctly. 155.It "bce%d: DMA resource allocation failed!" 156The driver could not allocate DMA memory to setup the controllers 157host memory data structures. 158.It "bce%d: Interface allocation failed!" 159The driver could not create a network interface for the controller. 160.It "bce%d: PHY probe failed!" 161The driver could not access the PHY used by the controller. 162.It "bce%d: Failed to setup IRQ!" 163The driver could not initialize the IRQ handler. 164.It "bce%d: Error: PHY read timeout!" 165The driver could not read a PHY register before the timeout period expired. 166.It "bce%d: PHY write timeout!" 167The driver could not write to the PHY register because a timeout occurred. 168.It "bce%d: Timeout error reading NVRAM at offset 0x%08X!" 169The driver could not write to NVRAM because a timeout occurred. 170.It "bce%d: Unknown Flash NVRAM found!" 171The driver does not recognize the NVRAM device being used and therefore 172cannot access it correctly. 173.It "bce%d: Invalid NVRAM magic value!" 174The driver cannot read NVRAM or the NVRAM is corrupt. 175.It "bce%d: Invalid Manufacturing Information NVRAM CRC!" 176The driver cannot read NVRAM or the NVRAM is corrupt. 177.It "bce%d: Invalid Feature Configuration Information NVRAM CRC!" 178The driver cannot read NVRAM or the NVRAM is corrupt. 179.It "bce%d: DMA mapping error!" 180The driver was unable to map memory into DMA addressable space required 181by the controller. 182.It "bce%d: Could not allocate parent DMA tag!" 183The driver could not allocate a PCI compatible DMA tag. 184.It "bce%d: Could not allocate status block DMA tag!" 185The driver could not allocate a DMA tag for the controller's 186status block. 187.It "bce%d: Could not allocate status block DMA memory!" 188The driver could not allocate DMA addressable memory for the controller's 189status block. 190.It "bce_d: Could not map status block DMA memory!" 191The driver could not map the status block memory into the controller's DMA 192address space. 193.It "bce%d: Could not allocate statistics block DMA tag!" 194The driver could not allocate a DMA tag for the controller's 195statistics block. 196.It "bce%d: Could not allocate statistics block DMA memory!" 197The driver could not allocate DMA addressable memory for the controller's 198statistics block. 199.It "bce%d: Could not map statistics block DMA memory!" 200The driver could not map the statistics block memory into the controller's DMA 201address space. 202.It "bce%d: Could not allocate TX descriptor chain DMA tag!" 203The driver could not allocate a DMA tag for the controller's 204TX chain. 205.It "bce%d: Could not allocate TX descriptor chain DMA memory! 206The driver could not allocate DMA addressable memory for the controller's 207TX chain. 208.It "bce%d: Could not map TX descriptor chain DMA memory!" 209The driver could not map the TX descriptor chain memory into the controller's DMA 210address space. 211.It "bce%d: Could not allocate TX mbuf DMA tag!" 212The driver could not allocate a DMA tag for the controller's 213TX mbuf memory. 214.It "bce%d: Unable to create TX mbuf DMA map!" 215The driver could not map the TX mbuf memory into the controller's DMA 216address space. 217.It "bce%d: Could not allocate RX descriptor chain DMA tag!" 218The driver could not allocate a DMA tag for the controller's 219RX chain. 220.It "bce%d: Could not allocate RX descriptor chain " 221The driver could not allocate DMA addressable memory for the controller's 222RX chain. 223.It "bce%d: Could not map RX descriptor chain DMA memory!" 224The driver could not map the RX descriptor chain memory into the controller's DMA 225address space. 226.It "bce%d: Could not allocate RX mbuf DMA tag!" 227The driver could not allocate a DMA tag for the controller's 228RX mbuf memory. 229.It "bce%d: Unable to create RX mbuf DMA map!" 230The driver could not map the RX mbuf memory into the controller's DMA 231address space. 232.It "bce%d: Firmware synchronization timeout!" 233The driver was not able to synchronize with the firmware running on the 234controller. 235The firmware may be stopped or hung. 236.It "bce%d: Invalid Ethernet address!" 237The driver was not able to read a valid Ethernet MAC address from NVRAM. 238.It "bce%d: Reset failed!" 239The driver has encountered a fatal initialization error. 240.It "bce%d: Byte swap is incorrect!" 241The driver has encountered a fatal initialization error. 242Contact the author 243with details of the CPU architecture and system chipset in use. 244.It "bce%d: Firmware did not complete initialization!" 245The driver has encountered a fatal initialization error. 246.It "bce%d: Bootcode not running!" 247The driver has encountered a fatal initialization error. 248.It "bce%d: Error mapping mbuf into RX chain!" 249The driver could not map a RX mbuf into DMA addressable memory. 250.It "bce%d: Error filling RX chain: rx_bd[0x%04X]!" 251The driver was unable to allocate enough mbufs to fill the RX chain 252during initialization. 253Try increasing the number of mbufs available in 254the system, increase system memory, or if using jumbo frames, make sure 255enough 9KB mbufs are available. 256.It "bce%d: Failed to allocate new mbuf, incoming frame dropped!" 257The driver was unable to allocate a new mbuf for the RX chain and reused 258the mbuf for the received frame, dropping the incoming frame in the process. 259Try increasing the number of mbufs available in the system or increase system 260memory. 261.It "bce%d: Controller reset failed!" 262A fatal initialization error has occurred. 263.It "bce%d: Controller initialization failed!" 264A fatal initialization error has occurred. 265.It "bce%d: Block initialization failed!" 266A fatal initialization error has occurred. 267.It "bce%d: Error mapping mbuf into TX chain!" 268The driver could not map a TX mbuf into DMA addressable memory. 269.It "bce%d: Error registering poll function!" 270The driver received an error while attempting to register the poll function. 271.It "bce%d: Changing VLAN_MTU not supported." 272Changing the VLAN MTU is not currently supported by the driver. 273.It "bce%d: Cannot change VLAN_HWTAGGING while management firmware (ASF/IPMI/UMP) is running!" 274Management firmware to support ASF/IPMI/UMP requires that VLAN 275tag stripping be enabled in the controller. 276.It "bce%d: Changing VLAN_HWTAGGING not supported!" 277Disabling VLAN tag stripping is not currently supported by the driver. 278.It "bce%d: Watchdog timeout occurred, resetting!" 279The device has stopped responding to the network, there is a problem 280with the cable connection, or a driver logic problem has occurred.. 281.It "bce%d: Fatal attention detected: 0x%08X!" 282A controller hardware failure has occurred. 283If the problem continues replace the controller. 284.El 285.Sh SEE ALSO 286.Xr altq 4 , 287.Xr arp 4 , 288.Xr miibus 4 , 289.Xr netintro 4 , 290.Xr ng_ether 4 , 291.Xr vlan 4 , 292.Xr ifconfig 8 293.Sh HISTORY 294The 295.Nm 296device driver first appeared in 297.Fx 6.1 . 298.Sh AUTHORS 299The 300.Nm 301driver was written by 302.An David Christensen Aq davidch@broadcom.com . 303