1 /* 2 * Copyright (c) 2000 by Matthew Jacob 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions, and the following disclaimer, 10 * without modification, immediately at the beginning of the file. 11 * 2. The name of the author may not be used to endorse or promote products 12 * derived from this software without specific prior written permission. 13 * 14 * Alternatively, this software may be distributed under the terms of the 15 * the GNU Public License ("GPL"). 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 20 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR 21 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 27 * SUCH DAMAGE. 28 * 29 * Matthew Jacob 30 * Feral Software 31 * mjacob@feral.com 32 */ 33 34 #include <unistd.h> 35 #include <stddef.h> 36 #include <stdint.h> 37 #include <stdlib.h> 38 #include <stdio.h> 39 #include <sys/ioctl.h> 40 #include <cam/scsi/scsi_all.h> 41 #include <cam/scsi/scsi_enc.h> 42 43 #include "eltsub.h" 44 45 char * 46 geteltnm(int type) 47 { 48 static char rbuf[132]; 49 50 switch (type) { 51 case ELMTYP_UNSPECIFIED: 52 sprintf(rbuf, "Unspecified"); 53 break; 54 case ELMTYP_DEVICE: 55 sprintf(rbuf, "Device Slot"); 56 break; 57 case ELMTYP_POWER: 58 sprintf(rbuf, "Power Supply"); 59 break; 60 case ELMTYP_FAN: 61 sprintf(rbuf, "Cooling"); 62 break; 63 case ELMTYP_THERM: 64 sprintf(rbuf, "Temperature Sensor"); 65 break; 66 case ELMTYP_DOORLOCK: 67 sprintf(rbuf, "Door Lock"); 68 break; 69 case ELMTYP_ALARM: 70 sprintf(rbuf, "Audible alarm"); 71 break; 72 case ELMTYP_ESCC: 73 sprintf(rbuf, "Enclosure Services Controller Electronics"); 74 break; 75 case ELMTYP_SCC: 76 sprintf(rbuf, "SCC Controller Electronics"); 77 break; 78 case ELMTYP_NVRAM: 79 sprintf(rbuf, "Nonvolatile Cache"); 80 break; 81 case ELMTYP_INV_OP_REASON: 82 sprintf(rbuf, "Invalid Operation Reason"); 83 break; 84 case ELMTYP_UPS: 85 sprintf(rbuf, "Uninterruptible Power Supply"); 86 break; 87 case ELMTYP_DISPLAY: 88 sprintf(rbuf, "Display"); 89 break; 90 case ELMTYP_KEYPAD: 91 sprintf(rbuf, "Key Pad Entry"); 92 break; 93 case ELMTYP_ENCLOSURE: 94 sprintf(rbuf, "Enclosure"); 95 break; 96 case ELMTYP_SCSIXVR: 97 sprintf(rbuf, "SCSI Port/Transceiver"); 98 break; 99 case ELMTYP_LANGUAGE: 100 sprintf(rbuf, "Language"); 101 break; 102 case ELMTYP_COMPORT: 103 sprintf(rbuf, "Communication Port"); 104 break; 105 case ELMTYP_VOM: 106 sprintf(rbuf, "Voltage Sensor"); 107 break; 108 case ELMTYP_AMMETER: 109 sprintf(rbuf, "Current Sensor"); 110 break; 111 case ELMTYP_SCSI_TGT: 112 sprintf(rbuf, "SCSI Target Port"); 113 break; 114 case ELMTYP_SCSI_INI: 115 sprintf(rbuf, "SCSI Initiator Port"); 116 break; 117 case ELMTYP_SUBENC: 118 sprintf(rbuf, "Simple Subenclosure"); 119 break; 120 case ELMTYP_ARRAY_DEV: 121 sprintf(rbuf, "Array Device Slot"); 122 break; 123 case ELMTYP_SAS_EXP: 124 sprintf(rbuf, "SAS Expander"); 125 break; 126 case ELMTYP_SAS_CONN: 127 sprintf(rbuf, "SAS Connector"); 128 break; 129 default: 130 (void) sprintf(rbuf, "<Type 0x%x>", type); 131 break; 132 } 133 return (rbuf); 134 } 135 136 static char * 137 scode2ascii(u_char code) 138 { 139 static char rbuf[32]; 140 switch (code & 0xf) { 141 case SES_OBJSTAT_UNSUPPORTED: 142 sprintf(rbuf, "Unsupported"); 143 break; 144 case SES_OBJSTAT_OK: 145 sprintf(rbuf, "OK"); 146 break; 147 case SES_OBJSTAT_CRIT: 148 sprintf(rbuf, "Critical"); 149 break; 150 case SES_OBJSTAT_NONCRIT: 151 sprintf(rbuf, "Noncritical"); 152 break; 153 case SES_OBJSTAT_UNRECOV: 154 sprintf(rbuf, "Unrecoverable"); 155 break; 156 case SES_OBJSTAT_NOTINSTALLED: 157 sprintf(rbuf, "Not Installed"); 158 break; 159 case SES_OBJSTAT_UNKNOWN: 160 sprintf(rbuf, "Unknown"); 161 break; 162 case SES_OBJSTAT_NOTAVAIL: 163 sprintf(rbuf, "Not Available"); 164 break; 165 case SES_OBJSTAT_NOACCESS: 166 sprintf(rbuf, "No Access Allowed"); 167 break; 168 default: 169 sprintf(rbuf, "<Status 0x%x>", code & 0xf); 170 break; 171 } 172 return (rbuf); 173 } 174 175 176 char * 177 stat2ascii(int eletype __unused, u_char *cstat) 178 { 179 static char ebuf[256], *scode; 180 181 scode = scode2ascii(cstat[0]); 182 sprintf(ebuf, "status: %s%s%s%s (0x%02x 0x%02x 0x%02x 0x%02x)", 183 scode, 184 (cstat[0] & 0x40) ? ", Prd.Fail" : "", 185 (cstat[0] & 0x20) ? ", Disabled" : "", 186 (cstat[0] & 0x10) ? ", Swapped" : "", 187 cstat[0], cstat[1], cstat[2], cstat[3]); 188 return (ebuf); 189 } 190