1 /* $FreeBSD$ */ 2 /* 3 * Copyright (c) 2000 by Matthew Jacob 4 * All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions, and the following disclaimer, 11 * without modification, immediately at the beginning of the file. 12 * 2. The name of the author may not be used to endorse or promote products 13 * derived from this software without specific prior written permission. 14 * 15 * Alternatively, this software may be distributed under the terms of the 16 * the GNU Public License ("GPL"). 17 * 18 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 19 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 21 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR 22 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 23 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 24 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 25 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 26 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 27 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 28 * SUCH DAMAGE. 29 * 30 * Matthew Jacob 31 * Feral Software 32 * mjacob@feral.com 33 */ 34 35 #include <unistd.h> 36 #include <stddef.h> 37 #include <stdint.h> 38 #include <stdlib.h> 39 #include <stdio.h> 40 #include <sys/ioctl.h> 41 #include <cam/scsi/scsi_all.h> 42 #include <cam/scsi/scsi_enc.h> 43 44 #include "eltsub.h" 45 46 char * 47 geteltnm(int type) 48 { 49 static char rbuf[132]; 50 51 switch (type) { 52 case ELMTYP_UNSPECIFIED: 53 sprintf(rbuf, "Unspecified"); 54 break; 55 case ELMTYP_DEVICE: 56 sprintf(rbuf, "Device Slot"); 57 break; 58 case ELMTYP_POWER: 59 sprintf(rbuf, "Power Supply"); 60 break; 61 case ELMTYP_FAN: 62 sprintf(rbuf, "Cooling"); 63 break; 64 case ELMTYP_THERM: 65 sprintf(rbuf, "Temperature Sensor"); 66 break; 67 case ELMTYP_DOORLOCK: 68 sprintf(rbuf, "Door Lock"); 69 break; 70 case ELMTYP_ALARM: 71 sprintf(rbuf, "Audible alarm"); 72 break; 73 case ELMTYP_ESCC: 74 sprintf(rbuf, "Enclosure Services Controller Electronics"); 75 break; 76 case ELMTYP_SCC: 77 sprintf(rbuf, "SCC Controller Electronics"); 78 break; 79 case ELMTYP_NVRAM: 80 sprintf(rbuf, "Nonvolatile Cache"); 81 break; 82 case ELMTYP_INV_OP_REASON: 83 sprintf(rbuf, "Invalid Operation Reason"); 84 break; 85 case ELMTYP_UPS: 86 sprintf(rbuf, "Uninterruptible Power Supply"); 87 break; 88 case ELMTYP_DISPLAY: 89 sprintf(rbuf, "Display"); 90 break; 91 case ELMTYP_KEYPAD: 92 sprintf(rbuf, "Key Pad Entry"); 93 break; 94 case ELMTYP_ENCLOSURE: 95 sprintf(rbuf, "Enclosure"); 96 break; 97 case ELMTYP_SCSIXVR: 98 sprintf(rbuf, "SCSI Port/Transceiver"); 99 break; 100 case ELMTYP_LANGUAGE: 101 sprintf(rbuf, "Language"); 102 break; 103 case ELMTYP_COMPORT: 104 sprintf(rbuf, "Communication Port"); 105 break; 106 case ELMTYP_VOM: 107 sprintf(rbuf, "Voltage Sensor"); 108 break; 109 case ELMTYP_AMMETER: 110 sprintf(rbuf, "Current Sensor"); 111 break; 112 case ELMTYP_SCSI_TGT: 113 sprintf(rbuf, "SCSI Target Port"); 114 break; 115 case ELMTYP_SCSI_INI: 116 sprintf(rbuf, "SCSI Initiator Port"); 117 break; 118 case ELMTYP_SUBENC: 119 sprintf(rbuf, "Simple Subenclosure"); 120 break; 121 case ELMTYP_ARRAY_DEV: 122 sprintf(rbuf, "Array Device Slot"); 123 break; 124 case ELMTYP_SAS_EXP: 125 sprintf(rbuf, "SAS Expander"); 126 break; 127 case ELMTYP_SAS_CONN: 128 sprintf(rbuf, "SAS Connector"); 129 break; 130 default: 131 (void) sprintf(rbuf, "<Type 0x%x>", type); 132 break; 133 } 134 return (rbuf); 135 } 136 137 static char * 138 scode2ascii(u_char code) 139 { 140 static char rbuf[32]; 141 switch (code & 0xf) { 142 case SES_OBJSTAT_UNSUPPORTED: 143 sprintf(rbuf, "Unsupported"); 144 break; 145 case SES_OBJSTAT_OK: 146 sprintf(rbuf, "OK"); 147 break; 148 case SES_OBJSTAT_CRIT: 149 sprintf(rbuf, "Critical"); 150 break; 151 case SES_OBJSTAT_NONCRIT: 152 sprintf(rbuf, "Noncritical"); 153 break; 154 case SES_OBJSTAT_UNRECOV: 155 sprintf(rbuf, "Unrecoverable"); 156 break; 157 case SES_OBJSTAT_NOTINSTALLED: 158 sprintf(rbuf, "Not Installed"); 159 break; 160 case SES_OBJSTAT_UNKNOWN: 161 sprintf(rbuf, "Unknown"); 162 break; 163 case SES_OBJSTAT_NOTAVAIL: 164 sprintf(rbuf, "Not Available"); 165 break; 166 case SES_OBJSTAT_NOACCESS: 167 sprintf(rbuf, "No Access Allowed"); 168 break; 169 default: 170 sprintf(rbuf, "<Status 0x%x>", code & 0xf); 171 break; 172 } 173 return (rbuf); 174 } 175 176 177 char * 178 stat2ascii(int eletype __unused, u_char *cstat) 179 { 180 static char ebuf[256], *scode; 181 182 scode = scode2ascii(cstat[0]); 183 sprintf(ebuf, "status: %s%s%s%s (0x%02x 0x%02x 0x%02x 0x%02x)", 184 scode, 185 (cstat[0] & 0x40) ? ", Prd.Fail" : "", 186 (cstat[0] & 0x20) ? ", Disabled" : "", 187 (cstat[0] & 0x10) ? ", Swapped" : "", 188 cstat[0], cstat[1], cstat[2], cstat[3]); 189 return (ebuf); 190 } 191