1#!/bin/sh 2#- 3# Copyright (c) 2016 Devin Teske 4# All rights reserved. 5# 6# Redistribution and use in source and binary forms, with or without 7# modification, are permitted provided that the following conditions 8# are met: 9# 1. Redistributions of source code must retain the above copyright 10# notice, this list of conditions and the following disclaimer. 11# 2. Redistributions in binary form must reproduce the above copyright 12# notice, this list of conditions and the following disclaimer in the 13# documentation and/or other materials provided with the distribution. 14# 15# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 16# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 17# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 18# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 19# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 20# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 21# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 22# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 23# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 24# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 25# SUCH DAMAGE. 26# 27# $FreeBSD$ 28# 29############################################################ IDENT(1) 30# 31# $Title: if_bridge(4) management script for vnet jails $ 32# 33############################################################ INFORMATION 34# 35# Use this tool with jail.conf(5) (or rc.conf(5) ``legacy'' configuration) to 36# manage `vnet' interfaces for jails. Designed to automate the creation of vnet 37# interface(s) during jail `prestart' and destroy said interface(s) during jail 38# `poststop'. 39# 40# In jail.conf(5) format: 41# 42# ### BEGIN EXCERPT ### 43# 44# xxx { 45# host.hostname = "xxx.yyy"; 46# path = "/vm/xxx"; 47# 48# # 49# # NB: Below 2-lines required 50# # NB: The number of eNb_xxx interfaces should match the number of 51# # arguments given to `jib addm xxx' in exec.prestart value. 52# # 53# vnet; 54# vnet.interface = "e0b_xxx e1b_xxx ..."; 55# 56# exec.clean; 57# exec.system_user = "root"; 58# exec.jail_user = "root"; 59# 60# # 61# # NB: Below 2-lines required 62# # NB: The number of arguments after `jib addm xxx' should match 63# # the number of eNb_xxx arguments in vnet.interface value. 64# # 65# exec.prestart += "jib addm xxx em0 em1 ..."; 66# exec.poststop += "jib destroy xxx"; 67# 68# # Standard recipe 69# exec.start += "/bin/sh /etc/rc"; 70# exec.stop = "/bin/sh /etc/rc.shutdown"; 71# exec.consolelog = "/var/log/jail_xxx_console.log"; 72# mount.devfs; 73# 74# # Optional (default off) 75# #allow.mount; 76# #allow.set_hostname = 1; 77# #allow.sysvipc = 1; 78# #devfs_ruleset = "11"; # rule to unhide bpf for DHCP 79# } 80# 81# ### END EXCERPT ### 82# 83# In rc.conf(5) ``legacy'' format (used when /etc/jail.conf does not exist): 84# 85# ### BEGIN EXCERPT ### 86# 87# jail_enable="YES" 88# jail_list="xxx" 89# 90# # 91# # Global presets for all jails 92# # 93# jail_devfs_enable="YES" # mount devfs 94# 95# # 96# # Global options (default off) 97# # 98# #jail_mount_enable="YES" # mount /etc/fstab.{name} 99# #jail_set_hostname_allow="YES" # Allow hostname to change 100# #jail_sysvipc_allow="YES" # Allow SysV Interprocess Comm. 101# 102# # xxx 103# jail_xxx_hostname="xxx.shxd.cx" # hostname 104# jail_xxx_rootdir="/vm/xxx" # root directory 105# jail_xxx_vnet_interfaces="e0b_xxx e1bxxx ..." # vnet interface(s) 106# jail_xxx_exec_prestart0="jib addm xxx em0 em1 ..." # bridge interface(s) 107# jail_xxx_exec_poststop0="jib destroy xxx" # destroy interface(s) 108# #jail_xxx_mount_enable="YES" # mount /etc/fstab.xxx 109# #jail_xxx_devfs_ruleset="11" # rule to unhide bpf for DHCP 110# 111# ### END EXCERPT ### 112# 113# Note that the legacy rc.conf(5) format is converted to 114# /var/run/jail.{name}.conf by /etc/rc.d/jail if jail.conf(5) is missing. 115# 116# ASIDE: dhclient(8) inside a vnet jail... 117# 118# To allow dhclient(8) to work inside a vnet jail, make sure the following 119# appears in /etc/devfs.rules (which should be created if it doesn't exist): 120# 121# [devfsrules_jail=11] 122# add include $devfsrules_hide_all 123# add include $devfsrules_unhide_basic 124# add include $devfsrules_unhide_login 125# add path 'bpf*' unhide 126# 127# And set ether devfs.ruleset="11" (jail.conf(5)) or 128# jail_{name}_devfs_ruleset="11" (rc.conf(5)). 129# 130# NB: While this tool can't create every type of desirable topology, it should 131# handle most setups, minus some which considered exotic or purpose-built. 132# 133############################################################ GLOBALS 134 135pgm="${0##*/}" # Program basename 136 137# 138# Global exit status 139# 140SUCCESS=0 141FAILURE=1 142 143############################################################ FUNCTIONS 144 145usage() 146{ 147 local action usage descr 148 exec >&2 149 echo "Usage: $pgm action [arguments]" 150 echo "Actions:" 151 for action in \ 152 addm \ 153 show \ 154 show1 \ 155 destroy \ 156 ; do 157 eval usage=\"\$jib_${action}_usage\" 158 [ "$usage" ] || continue 159 eval descr=\"\$jib_${action}_descr\" 160 printf "\t%s\n\t\t%s\n" "$usage" "$descr" 161 done 162 exit $FAILURE 163} 164 165action_usage() 166{ 167 local usage action="$1" 168 eval usage=\"\$jib_${action}_usage\" 169 echo "Usage: $pgm $usage" >&2 170 exit $FAILURE 171} 172 173derive_mac() 174{ 175 local OPTIND=1 OPTARG __flag 176 local __mac_num= __make_pair= 177 while getopts 2n: __flag; do 178 case "$__flag" in 179 2) __make_pair=1 ;; 180 n) __mac_num=${OPTARG%%[^0-9]*} ;; 181 esac 182 done 183 shift $(( $OPTIND - 1 )) 184 185 if [ ! "$__mac_num" ]; then 186 eval __mac_num=\${_${iface}_num:--1} 187 __mac_num=$(( $__mac_num + 1 )) 188 eval _${iface}_num=\$__mac_num 189 fi 190 191 local __iface="$1" __name="$2" __var_to_set="$3" __var_to_set_b="$4" 192 local __iface_devid __new_devid __num __new_devid_b 193 # 194 # Calculate MAC address derived from given iface. 195 # 196 # The formula I'm using is ``NP:SS:SS:II:II:II'' where: 197 # + N denotes 4 bits used as a counter to support branching 198 # each parent interface up to 15 times under the same jail 199 # name (see S below). 200 # + P denotes the special nibble whose value, if one of 201 # 2, 6, A, or E (but usually 2) denotes a privately 202 # administered MAC address (while remaining routable). 203 # + S denotes 16 bits, the sum(1) value of the jail name. 204 # + I denotes bits that are inherited from parent interface. 205 # 206 # The S bits are a CRC-16 checksum of NAME, allowing the jail 207 # to change link numbers in ng_bridge(4) without affecting the 208 # MAC address. Meanwhile, if... 209 # + the jail NAME changes (e.g., it was duplicated and given 210 # a new name with no other changes) 211 # + the underlying network interface changes 212 # + the jail is moved to another host 213 # the MAC address will be recalculated to a new, similarly 214 # unique value preventing conflict. 215 # 216 __iface_devid=$( ifconfig $__iface ether | awk '/ether/,$0=$2' ) 217 # ??:??:??:II:II:II 218 __new_devid=${__iface_devid#??:??:??} # => :II:II:II 219 # => :SS:SS:II:II:II 220 __num=$( set -- `echo -n "$__name" | sum` && echo $1 ) 221 __new_devid=$( printf :%02x:%02x \ 222 $(( $__num >> 8 & 255 )) $(( $__num & 255 )) )$__new_devid 223 # => P:SS:SS:II:II:II 224 case "$__iface_devid" in 225 ?2:*) __new_devid=a$__new_devid __new_devid_b=e$__new_devid ;; 226 ?[Ee]:*) __new_devid=2$__new_devid __new_devid_b=6$__new_devid ;; 227 *) __new_devid=2$__new_devid __new_devid_b=e$__new_devid 228 esac 229 # => NP:SS:SS:II:II:II 230 __new_devid=$( printf %x $(( $__mac_num & 15 )) )$__new_devid 231 __new_devid_b=$( printf %x $(( $__mac_num & 15 )) )$__new_devid_b 232 233 # 234 # Return derivative MAC address(es) 235 # 236 if [ "$__make_pair" ]; then 237 if [ "$__var_to_set" -a "$__var_to_set_b" ]; then 238 eval $__var_to_set=\$__new_devid 239 eval $__var_to_set_b=\$__new_devid_b 240 else 241 echo $__new_devid $__new_devid_b 242 fi 243 else 244 if [ "$__var_to_set" ]; then 245 eval $__var_to_set=\$__new_devid 246 else 247 echo $__new_devid 248 fi 249 fi 250} 251 252mustberoot_to_continue() 253{ 254 if [ "$( id -u )" -ne 0 ]; then 255 echo "Must run as root!" >&2 256 exit $FAILURE 257 fi 258} 259 260jib_addm_usage="addm [-b BRIDGE_NAME] NAME [!]iface0 [[!]iface1 ...]" 261jib_addm_descr="Creates e0b_NAME [e1b_NAME ...]" 262jib_addm() 263{ 264 local OPTIND=1 OPTARG flag bridge=bridge 265 while getopts b: flag; do 266 case "$flag" in 267 b) bridge="${OPTARG:-bridge}" ;; 268 *) action_usage addm # NOTREACHED 269 esac 270 done 271 shift $(( $OPTIND - 1 )) 272 273 local name="$1" 274 [ "${name:-x}" = "${name#*[!0-9a-zA-Z_]}" -a $# -gt 1 ] || 275 action_usage addm # NOTREACHED 276 shift 1 # name 277 278 mustberoot_to_continue 279 280 local iface eiface_devid_a eiface_devid_b 281 local new no_derive num quad i=0 282 for iface in $*; do 283 284 no_derive= 285 case "$iface" in 286 !*) iface=${iface#!} no_derive=1 ;; 287 esac 288 289 # 1. Make sure the interface doesn't exist already 290 ifconfig "e${i}a_$name" > /dev/null 2>&1 && continue 291 292 # 2. Bring the interface up 293 ifconfig $iface up || return 294 295 # 3. Make sure the interface has been bridged 296 if ! ifconfig "$iface$bridge" > /dev/null 2>&1; then 297 new=$( ifconfig bridge create ) || return 298 ifconfig $new addm $iface || return 299 ifconfig $new name "$iface$bridge" || return 300 ifconfig "$iface$bridge" up || return 301 fi 302 303 # 4. Create a new interface to the bridge 304 new=$( ifconfig epair create ) || return 305 ifconfig "$iface$bridge" addm $new || return 306 307 # 5. Rename the new interface 308 ifconfig $new name "e${i}a_$name" || return 309 ifconfig ${new%a}b name "e${i}b_$name" || return 310 ifconfig "e${i}a_$name" up || return 311 ifconfig "e${i}b_$name" up || return 312 313 # 314 # 6. Set the MAC address of the new interface using a sensible 315 # algorithm to prevent conflicts on the network. 316 # 317 eiface_devid_a= eiface_devid_b= 318 [ "$no_derive" ] || derive_mac -2 $iface "$name" \ 319 eiface_devid_a eiface_devid_b 320 if [ "$eiface_devid_a" -a "$eiface_devid_b" ]; then 321 ifconfig "e${i}a_$name" ether $eiface_devid_a 322 ifconfig "e${i}b_$name" ether $eiface_devid_b 323 fi > /dev/null 2>&1 324 325 i=$(( $i + 1 )) # on to next e{i}b_name 326 done # for iface 327} 328 329jib_show_usage="show" 330jib_show_descr="List possible NAME values for \`show NAME'" 331jib_show1_usage="show NAME" 332jib_show1_descr="Lists e0b_NAME [e1b_NAME ...]" 333jib_show2_usage="show [NAME]" 334jib_show() 335{ 336 local OPTIND=1 OPTARG flag 337 while getopts "" flag; do 338 case "$flag" in 339 *) action_usage show2 # NOTREACHED 340 esac 341 done 342 shift $(( $OPTIND - 1 )) 343 if [ $# -eq 0 ]; then 344 ifconfig | awk ' 345 /^[^:[:space:]]+:/ { 346 iface = $1 347 sub(/:.*/, "", iface) 348 next 349 } 350 $1 == "groups:" { 351 for (n = split($0, group); n > 1; n--) { 352 if (group[n] != "bridge") continue 353 print iface 354 next 355 } 356 }' | 357 xargs -rn1 ifconfig | 358 awk '$1 == "member:" && 359 sub(/^e[[:digit:]]+a_/, "", $2), $0 = $2' | 360 sort -u 361 return 362 fi 363 ifconfig | awk -v name="$1" ' 364 match($0, /^e[[:digit:]]+a_/) && sub(/:.*/, "") && 365 substr($1, RSTART + RLENGTH) == name 366 ' | sort 367} 368 369jib_destroy_usage="destroy NAME" 370jib_destroy_descr="Destroy e0b_NAME [e1b_NAME ...]" 371jib_destroy() 372{ 373 local OPTIND=1 OPTARG flag 374 while getopts "" flag; do 375 case "$flag" in 376 *) action_usage destroy # NOTREACHED 377 esac 378 done 379 shift $(( $OPTIND -1 )) 380 local name="$1" 381 [ "${name:-x}" = "${name#*[!0-9a-zA-Z_]}" -a $# -eq 1 ] || 382 action_usage destroy # NOTREACHED 383 mustberoot_to_continue 384 jib_show "$name" | xargs -rn1 -I eiface ifconfig eiface destroy 385} 386 387############################################################ MAIN 388 389# 390# Command-line arguments 391# 392action="$1" 393[ "$action" ] || usage # NOTREACHED 394 395# 396# Validate action argument 397# 398if [ "$BASH_VERSION" ]; then 399 type="$( type -t "jib_$action" )" || usage # NOTREACHED 400else 401 type="$( type "jib_$action" 2> /dev/null )" || usage # NOTREACHED 402fi 403case "$type" in 404*function) 405 shift 1 # action 406 eval "jib_$action" \"\$@\" 407 ;; 408*) usage # NOTREACHED 409esac 410 411################################################################################ 412# END 413################################################################################ 414