1# $FreeBSD$ 2# 3# NOTE: Please would any committer updating this file also update the 4# make.conf(5) manual page, if necessary, which is located in 5# src/share/man/man5/make.conf.5. 6# 7# /etc/make.conf, if present, will be read by make (see 8# /usr/share/mk/sys.mk). It allows you to override macro definitions 9# to make without changing your source tree, or anything the source 10# tree installs. 11# 12# This file must be in valid Makefile syntax. 13# 14# There are additional things you can put into /etc/make.conf. 15# You have to find those in the Makefiles and documentation of 16# the source tree. 17# 18# 19# The CPUTYPE variable controls which processor should be targeted for 20# generated code. This controls processor-specific optimizations in 21# certain code (currently only OpenSSL) as well as modifying the value 22# of CFLAGS to contain the appropriate optimization directive to gcc. 23# The automatic setting of CFLAGS may be overridden using the 24# NO_CPU_CFLAGS variable below. 25# Currently the following CPU types are recognized: 26# Intel x86 architecture: 27# (AMD CPUs) athlon-mp athlon-xp athlon-4 athlon-tbird athlon k6-3 28# k6-2 k6 k5 29# (Intel CPUs) p4 p3 p2 i686 i586/mmx i586 i486 i386 30# Alpha/AXP architecture: ev67 ev6 pca56 ev56 ev5 ev45 ev4 31# Intel ia64 architecture: itanium 32# 33# (?= allows to buildworld for a different CPUTYPE.) 34# 35#CPUTYPE?=i686 36#NO_CPU_CFLAGS= true # Don't add -march=<cpu> to CFLAGS automatically 37#NO_CPU_COPTFLAGS=true # Don't add -march=<cpu> to COPTFLAGS automatically 38# 39# CFLAGS controls the compiler settings used when compiling C code. 40# Note that optimization settings above -O (-O2, ...) are not recommended 41# or supported for compiling the world or the kernel - please revert any 42# nonstandard optimization settings to "-O" before submitting bug reports 43# to the developers. 44# Note also that at this time the -O2 setting is known to produce BROKEN 45# CODE on the Alpha platform. 46# 47#CFLAGS= -O -pipe 48# 49# CXXFLAGS controls the compiler settings used when compiling C++ code. 50# Note that CXXFLAGS is initially set to the value of CFLAGS. If you wish 51# to add to CXXFLAGS value, "+=" must be used rather than "=". Using "=" 52# alone will remove the often needed contents of CFLAGS from CXXFLAGS. 53# 54#CXXFLAGS+= -fmemoize-lookups -fsave-memoized 55# 56# MAKE_SHELL controls the shell used internally by make(1) to process the 57# command scripts in makefiles. Three shells are supported, sh, ksh, and 58# csh. Using sh is most common, and advised. Using ksh *may* work, but is 59# not guaranteed to. Using csh is absurd. The default is to use sh. 60# 61#MAKE_SHELL?=sh 62# 63# BDECFLAGS are a set of gcc warning settings that Bruce Evans has suggested 64# for use in developing FreeBSD and testing changes. They can be used by 65# putting "CFLAGS+=${BDECFLAGS}" in /etc/make.conf. -Wconversion is not 66# included here due to compiler bugs, e.g., mkdir()'s mode_t argument. 67# 68#BDECFLAGS= -W -Wall -ansi -pedantic -Wbad-function-cast -Wcast-align \ 69# -Wcast-qual -Wchar-subscripts -Winline \ 70# -Wmissing-prototypes -Wnested-externs -Wpointer-arith \ 71# -Wredundant-decls -Wshadow -Wstrict-prototypes -Wwrite-strings 72# 73# To compile just the kernel with special optimizations, you should use 74# this instead of CFLAGS (which is not applicable to kernel builds anyway). 75# There is very little to gain by using higher optimization levels, and doing 76# so can cause problems. 77# 78#COPTFLAGS= -O -pipe 79# 80# To build the system compiler such that it forces high optimization levels to 81# a lower one. GCC -O2+ is known to trigger known optimizer bugs at various 82# times -- this is worse on the Alpha platform. The value assigned here will 83# be the highest optimization value used. 84#WANT_FORCE_OPTIMIZATION_DOWNGRADE=1 85# 86# Compare before install 87#INSTALL=install -C 88# 89# Mtree will follow symlinks 90#MTREE_FOLLOWS_SYMLINKS= -L 91# 92# To build ppp with normal permissions 93#PPP_NOSUID= true 94# 95# To enable installing ssh(1) with the setuid bit turned on 96#ENABLE_SUID_SSH= true 97# 98# To enable installing newgrp(1) with the setuid bit turned on. 99# Without the setuid bit, newgrp cannot change users' groups. 100#ENABLE_SUID_NEWGRP= true 101# 102# To avoid building various parts of the base system: 103#NO_CVS= true # do not build CVS 104#NO_CXX= true # do not build C++ and friends 105#NO_BIND= true # do not build BIND 106#NO_FORTRAN= true # do not build g77 and related libraries 107#NO_GDB= true # do not build GDB 108#NO_I4B= true # do not build isdn4bsd package 109#NO_IPFILTER= true # do not build IP Filter package 110#NO_LPR= true # do not build lpr and related programs 111#NO_MAILWRAPPER=true # do not build the mailwrapper(8) MTA selector 112#NO_MODULES= true # do not build modules with the kernel 113#NO_OBJC= true # do not build Objective C support 114#NO_OPENSSH= true # do not build OpenSSH 115#NO_OPENSSL= true # do not build OpenSSL (implies NO_OPENSSH) 116#NO_SENDMAIL= true # do not build sendmail and related programs 117#NO_SHAREDOCS= true # do not build the 4.4BSD legacy docs 118#NO_TCSH= true # do not build and install /bin/csh (which is tcsh) 119#NO_X= true # do not compile in XWindows support (e.g. doscmd) 120#NOCRYPT= true # do not build any crypto code 121#NOGAMES= true # do not build games (games/ subdir) 122#NOINFO= true # do not make or install info files 123#NOLIBC_R= true # do not build libc_r (re-entrant version of libc) 124#NOMAN= true # do not build manual pages 125#NOPROFILE= true # Avoid compiling profiled libraries 126#NOSECURE= true # do not build crypto code in secure/ subdir 127#NOSHARE= true # do not go into the share subdir 128# 129# To build sys/modules when building the world (our old way of doing things) 130#MODULES_WITH_WORLD=true # do not build modules when building kernel 131# 132# The list of modules to build instead of all of them. 133#MODULES_OVERRIDE= linux ipfw 134# 135# If you always want to build the Linux ext2fs kernel module. 136#WANT_EXT2FS_MODULE=yes 137# 138# The following controls building optional IDEA code in libcrypto and 139# certain ports. Patents are involved - you must not use this unless 140# you either have a license or fall within patent 'fair use' 141# provisions. 142# 143# *** It is YOUR RESPONSIBILITY to determine if you can use this! *** 144# 145# IDEA is patented in the USA and many European countries - thought to 146# be OK to use for any non-commercial use. This is optional. 147#MAKE_IDEA= YES # IDEA (128 bit symmetric encryption) 148# 149# If you do not want unformatted manual pages to be compressed 150# when they are installed: 151# 152#NOMANCOMPRESS= true 153# 154# 155# If you want the "compat" shared libraries installed as part of your normal 156# builds, uncomment these: 157# 158#COMPAT1X= yes 159#COMPAT20= yes 160#COMPAT21= yes 161#COMPAT22= yes 162#COMPAT3X= yes 163#COMPAT4X= yes 164# 165# 166# Default format for system documentation, depends on your printer. 167# Set this to "ascii" for simple printers or screen 168# 169#PRINTERDEVICE= ps 170# 171# 172# How long to wait for a console keypress before booting the default kernel. 173# This value is approximately in milliseconds. Keypresses are accepted by the 174# BIOS before booting from disk, making it possible to give custom boot 175# parameters even when this is set to 0. 176# 177#BOOTWAIT=0 178#BOOTWAIT=30000 179# 180# By default, the system will always use the keyboard/video card as system 181# console. However, the boot blocks may be dynamically configured to use a 182# serial port in addition to or instead of the keyboard/video console. 183# 184# By default we use COM1 as our serial console port *if* we're going to use 185# a serial port as our console at all. Alter as necessary. 186# 187# COM1: = 0x3F8, COM2: = 0x2F8, COM3: = 0x3E8, COM4: = 0x2E8 188# 189#BOOT_COMCONSOLE_PORT= 0x3F8 190# 191# The default serial console speed is 9600. Set the speed to a larger value 192# for better interactive response. 193# 194#BOOT_COMCONSOLE_SPEED= 115200 195# 196# By default the 'pxeboot' loader retrieves the kernel via NFS. Defining 197# this and recompiling /usr/src/sys/boot will cause it to retrieve the kernel 198# via TFTP. This allows pxeboot to load a custom BOOTP diskless kernel yet 199# still mount the server's '/' (i.e. rather than load the server's kernel). 200# 201#LOADER_TFTP_SUPPORT= YES 202# 203# 204# Kerberos IV 205# If you want KerberosIV (KTH eBones), define this: 206# 207#MAKE_KERBEROS4= yes 208# 209# 210# Kerberos 5 211# If you want Kerberos 5 (KTH Heimdal), define this: 212# 213#MAKE_KERBEROS5= yes 214# 215# Kerberos 5 su (k5su) 216# If you want to use the k5su utility, define this to have it installed 217# set-user-ID. 218#ENABLE_SUID_K5SU= yes 219# 220# 221# Kerberos5 222# If you want to install MIT Kerberos5 port somewhere other than /usr/local, 223# define this (this is also used to tell ssh1 that kerberos is needed): 224# 225#KRB5_HOME= /usr/local 226# 227# 228# CVSup update flags. Edit SUPFILE settings to reflect whichever distribution 229# file(s) you use on your site (see /usr/share/examples/cvsup/README for more 230# information on CVSup and these files). To use, do "make update" in /usr/src. 231# 232#SUP_UPDATE= yes 233# 234#SUP= /usr/local/bin/cvsup 235#SUPFLAGS= -g -L 2 236#SUPHOST= cvsup.uk.FreeBSD.org 237#SUPFILE= /usr/share/examples/cvsup/standard-supfile 238#PORTSSUPFILE= /usr/share/examples/cvsup/ports-supfile 239#DOCSUPFILE= /usr/share/examples/cvsup/doc-supfile 240# 241# top(1) uses a hash table for the user names. The size of this hash 242# can be tuned to match the number of local users. The table size should 243# be a prime number approximately twice as large as the number of lines in 244# /etc/passwd. The default number is 20011. 245# 246#TOP_TABLE_SIZE= 101 247# 248# Documentation 249# 250# The list of languages and encodings to build and install 251# 252#DOC_LANG= en_US.ISO8859-1 ru_RU.KOI8-R 253# 254# 255# sendmail 256# 257# The following sets the default m4 configuration file to use at 258# install time. Use with caution as a make install will overwrite 259# any existing /etc/mail/sendmail.cf. Note that SENDMAIL_CF is now 260# deprecated. The value should be a fully qualified path name. 261# Avoid using a value of /etc/mail/sendmail.mc as a buildworld will 262# create /etc/mail/sendmail.cf before installworld installs an 263# updated sendmail binary. 264# 265#SENDMAIL_MC=/etc/mail/myconfig.mc 266# 267# The following sets the default m4 configuration file for mail 268# submission to use at install time. Use with caution as a make 269# install will overwrite any existing /etc/mail/submit.cf. The 270# value should be a fully qualified path name. 271# Avoid using a value of /etc/mail/submit.mc as a buildworld will 272# create /etc/mail/submit.cf before installworld installs an 273# updated sendmail binary. 274# 275#SENDMAIL_SUBMIT_MC=/etc/mail/mysubmit.mc 276# 277# If you need to build additional .cf files during a make buildworld, 278# include the full paths to the .mc files in SENDMAIL_ADDITIONAL_MC. 279# Avoid using a value of /etc/mail/sendmail.mc as a buildworld will 280# create /etc/mail/sendmail.cf before installworld installs an 281# updated sendmail binary. 282# 283#SENDMAIL_ADDITIONAL_MC=/etc/mail/foo.mc /etc/mail/bar.mc 284# 285# Setting the following variable modifies the flags passed to m4 when 286# building a .cf file from a .mc file. It can be used to enable 287# features disabled by default. 288# 289#SENDMAIL_M4_FLAGS= 290# 291# Setting the following variables modifies the build environment for 292# sendmail and its related utilities. For example, SASL support can be 293# added with settings such as: 294# 295# with SASLv1: 296# SENDMAIL_CFLAGS=-I/usr/local/include/sasl1 -DSASL 297# SENDMAIL_LDFLAGS=-L/usr/local/lib 298# SENDMAIL_LDADD=-lsasl 299# 300# with SASLv2: 301# SENDMAIL_CFLAGS=-I/usr/local/include -DSASL=2 302# SENDMAIL_LDFLAGS=-L/usr/local/lib 303# SENDMAIL_LDADD=-lsasl2 304# 305# Note: If you are using Cyrus SASL with other applications which require 306# access to the sasldb file, you should add the following to your 307# sendmail.mc file: 308# 309# define(`confDONT_BLAME_SENDMAIL',`GroupReadableSASLDBFile') 310# 311#SENDMAIL_CFLAGS= 312#SENDMAIL_LDFLAGS= 313#SENDMAIL_LDADD= 314#SENDMAIL_DPADD= 315# 316# Setting SENDMAIL_SET_USER_ID will install the sendmail binary as a 317# set-user-ID root binary instead of a set-group-ID smmsp binary and will 318# prevent the installation of /etc/mail/submit.cf. 319# This is a deprecated mode of operation. See etc/mail/README for more 320# information. 321# 322#SENDMAIL_SET_USER_ID= 323# 324# The permissions to use on alias and map databases generated using 325# /etc/mail/Makefile. Defaults to 0640. 326# 327#SENDMAIL_MAP_PERMS= 328