1# $FreeBSD$ 2# 3# This file, if present, will be read by make (see /usr/share/mk/sys.mk). 4# It allows you to override macro definitions to make without changing 5# your source tree, or anything the source tree installs. 6# 7# This file must be in valid Makefile syntax. 8# 9# You have to find the things you can put here in the Makefiles and 10# documentation of the source tree. 11# 12# CFLAGS controls the compiler settings used when compiling C code. 13# Note that optimisation settings above -O (-O2, ...) are not recommended 14# or supported for compiling the world or the kernel - please revert any 15# nonstandard optimisation settings to "-O" before submitting bug reports 16# to the developers. 17# Note also that at this time the -O2 setting is known to produce BROKEN 18# CODE on the Alpha platform. 19# 20#CFLAGS= -O -pipe 21# 22# CXXFLAGS controls the compiler settings used when compiling C++ code. 23# Note that CXXFLAGS is initially set to the value of CFLAGS. If you wish 24# to add to CXXFLAGS value, "+=" must be used rather than "=". Using "=" 25# alone will remove the often needed contents of CFLAGS from CXXFLAGS. 26# 27#CXXFLAGS+= -fmemoize-lookups -fsave-memoized 28# 29# BDECFLAGS are a set of gcc warning settings that Bruce Evans has suggested 30# for use in developing FreeBSD and testing changes. They can be used by 31# putting "CFLAGS+=${BDECFLAGS}" in /etc/make.conf. 32# 33BDECFLAGS= -W -Wall -ansi -pedantic -Wbad-function-cast -Wcast-align \ 34 -Wcast-qual -Wchar-subscripts -Wconversion -Winline \ 35 -Wmissing-prototypes -Wnested-externs -Wpointer-arith \ 36 -Wredundant-decls -Wshadow -Wstrict-prototypes -Wwrite-strings 37# 38# Avoid compiling profiled libraries 39#NOPROFILE= true 40# 41# Compare before install 42#INSTALL=install -C 43# 44# To avoid building perl 45#NOPERL= true 46# 47# To avoid building the suid perl 48#NOSUIDPERL= true 49# 50# To build perl with thread support 51#PERL_THREADED= true 52# 53# To avoid building various parts of the base system: 54#NO_CVS= true # do not build CVS 55#NO_BIND= true # do not build BIND 56#NO_FORTRAN= true # do not build g77 and related libraries 57#NO_LPR= true # do not build lpr and related programs 58#NO_MAILWRAPPER=true # do not build the mailwrapper(8) MTA selector 59#NO_MODULES= true # do not build modules with the kernel 60#NO_OBJC= true # do not build Objective C support 61#NO_OPENSSH= true # do not build OpenSSH 62#NO_OPENSSL= true # do not build OpenSSL (implies NO_OPENSSH) 63#NO_SENDMAIL= true # do not build sendmail and related programs 64#NO_SHAREDOCS= true # do not build the 4.4BSD legacy docs 65#NO_TCSH= true # do not build and install /bin/csh (which is tcsh) 66#NO_X= true # do not compile in XWindows support (e.g. doscmd) 67#NOCRYPT= true # do not build any crypto code 68#NODESCRYPTLINKS=true # do not replace libcrypt -> libscrypt links 69#NOGAMES= true # do not build games (games/ subdir) 70#NOINFO= true # do not make or install info files 71#NOLIBC_R= true # do not build libc_r (re-entrant version of libc) 72#NOSECURE= true # do not build crypto code in secure/ subdir 73#NOSHARE= true # do not go into the share subdir 74#NOUUCP= true # do not build uucp related programs 75# 76# To build sys/modules when building the world (our old way of doing things) 77#MODULES_WITH_WORLD=true # do not build modules when building kernel 78# 79# 80# Controls for building various OPTIONAL parts of the crypto system. 81# Patents are involved - you must not use these unless you either have 82# a license or would be within patent 'fair use' provisions. 83# Generally 'educational use' is OK, but personal (even non-commercial) 84# use is not. 85# *** It is YOUR RESPONSIBILITY to determine if you can use these! *** 86# 87# Patented in the USA and many european countries - thought to be OK to 88# use for any non-commercial use. This is optional. 89#MAKE_IDEA= YES # IDEA (128 bit symmetric encryption) 90# 91# Patented in the USA only (due to expire in September 2000). RSA is 92# required for OpenSSH. Either use this or ports/security/rsaref. 93#MAKE_RSAINTL= YES # RSA (public key exchange) 94# 95# 96# To avoid running MAKEDEV all on /dev during install: 97#NO_MAKEDEV= true 98# 99# To compile just the kernel with special optimisations, you should use 100# this instead of CFLAGS (which is not applicable to kernel builds anyway): 101# 102#COPTFLAGS= -O -pipe 103# 104# If you do not want unformatted manual pages to be compressed 105# when they are installed: 106# 107#NOMANCOMPRESS= true 108# 109# 110# If you want the "compat" shared libraries installed as part of your normal 111# builds, uncomment these: 112# 113#COMPAT1X= yes 114#COMPAT20= yes 115#COMPAT21= yes 116#COMPAT22= yes 117#COMPAT3X= yes 118# 119# 120# If you do not want additional documentation (some of which are 121# a few hundred KB's) for ports to be installed: 122# 123#NOPORTDOCS= true 124# 125# 126# Default format for system documentation, depends on your printer. 127# Set this to "ascii" for simple printers or screen 128# 129#PRINTERDEVICE= ps 130# 131# 132# How long to wait for a console keypress before booting the default kernel. 133# This value is approximately in milliseconds. Keypresses are accepted by the 134# BIOS before booting from disk, making it possible to give custom boot 135# parameters even when this is set to 0. 136# 137#BOOTWAIT=0 138#BOOTWAIT=30000 139# 140# By default, the system will always use the keyboard/video card as system 141# console. However, the boot blocks may be dynamically configured to use a 142# serial port in addition to or instead of the keyboard/video console. 143# 144# By default we use COM1 as our serial console port *if* we're going to use 145# a serial port as our console at all. Alter as necessary. 146# 147# COM1: = 0x3F8, COM2: = 0x2F8, COM3: = 0x3E8, COM4: = 0x2E8 148# 149#BOOT_COMCONSOLE_PORT= 0x3F8 150# 151# The default serial console speed is 9600. Set the speed to a larger value 152# for better interactive response. 153# 154#BOOT_COMCONSOLE_SPEED= 115200 155# 156# 157# By default, this points to /usr/X11R6 for XFree86 releases 3.0 or earlier. 158# If you have a XFree86 from before 3.0 that has the X distribution in 159# /usr/X386, you want to uncomment this. 160# 161#X11BASE= /usr/X386 162# 163# 164# If you have Motif on your system, uncomment this. 165# 166#HAVE_MOTIF= yes 167#MOTIF_STATIC= yes 168# 169# If the default location of the Motif library (specified below) is NOT 170# appropriate for you, uncomment this and change it to the correct value. 171# If your motif is in ${X11BASE}/lib, you don't need to touch this line. 172# 173#MOTIFLIB= -L${X11BASE}/lib -lXm 174# 175# 176# If you're resident in the USA, this will help various ports to determine 177# whether or not they should attempt to comply with the various U.S. 178# export regulations on certain types of software which do not apply to 179# anyone else in the world. 180# 181#USA_RESIDENT= YES 182# 183# Next one will help ports developers to debug 184# 185#FORCE_PKG_REGISTER= YES 186# 187# 188# Port master sites. 189# 190# If you want your port fetches to go somewhere else than the default 191# (specified below) in case the distfile/patchfile was not found, 192# uncomment this and change it to a location nearest you. (Don't 193# remove the "/${DIST_SUBDIR}/" part.) 194# 195#MASTER_SITE_BACKUP?= \ 196# ftp://ftp.freebsd.org/pub/FreeBSD/ports/distfiles/${DIST_SUBDIR}/ 197# 198# If you want your port fetches to check the above site first (before 199# the MASTER_SITES specified in the port Makefiles), uncomment the 200# line below. You can also change the right side to point to wherever 201# you want. 202# 203#MASTER_SITE_OVERRIDE?= ${MASTER_SITE_BACKUP} 204# 205# Some ports use a special variable to point to a collection of 206# mirrors of well-known software archives. If you have a mirror close 207# to you, uncomment any of the following lines and change it to that 208# address. (Don't remove the "/%SUBDIR%/" part.) 209# 210# Note: the right hand sides of the following lines are only for your 211# information. For a full list of default sites, take a look at 212# bsd.port.mk. 213# 214#MASTER_SITE_XCONTRIB= ftp://ftp.x.org/contrib/%SUBDIR%/ 215#MASTER_SITE_GNU= ftp://prep.ai.mit.edu/pub/gnu/%SUBDIR%/ 216#MASTER_SITE_PERL_CPAN= ftp://ftp.digital.com/pub/plan/perl/CPAN/modules/by-module/%SUBDIR%/ 217#MASTER_SITE_TEX_CTAN= ftp://ftp.tex.ac.uk/tex-archive/%SUBDIR%/ 218#MASTER_SITE_SUNSITE= ftp://metalab.unc.edu/pub/Linux/%SUBDIR%/ 219#MASTER_SITE_KDE= ftp://ftp.kde.org/pub/kde/%SUBDIR%/ 220#MASTER_SITE_COMP_SOURCES= ftp://gatekeeper.dec.com/pub/usenet/comp.sources.%SUBDIR%/ 221#MASTER_SITE_GNOME= ftp://ftp.gnome.org/pub/GNOME/sources/%SUBDIR%/ 222#MASTER_SITE_AFTERSTEP= ftp://ftp.afterstep.org/%SUBDIR%/ 223#MASTER_SITE_WINDOWMAKER= ftp://ftp.windowmaker.org/pub/%SUBDIR%/ 224# 225# 226# Kerberos IV 227# If you want KerberosIV (KTH eBones), define this: 228# 229#MAKE_KERBEROS4= yes 230# 231# 232# Kerberos 5 233# If you want KerberosIV (KTH Heimdal), define this: 234# ** WARNING ** 235# ** WARNING ** This is very experimental at this stage. If you 236# ** WARNING ** need stable Kerberos5, rather use the port(s). 237# ** WARNING ** 238# 239#MAKE_KERBEROS5= yes 240# 241# 242# Kerberos5 243# If you want to install MIT Kerberos5 port somewhere other than /usr/local, 244# define this (this is also used to tell ssh1 that kerberos is needed): 245# 246#KRB5_HOME= /usr/local 247# 248# 249# CVSup update flags. Edit SUPFILE settings to reflect whichever distribution 250# file(s) you use on your site (see /usr/share/examples/cvsup/README for more 251# information on CVSup and these files). To use, do "make update" in /usr/src. 252# 253#SUP_UPDATE= yes 254# 255#SUP= /usr/local/bin/cvsup 256#SUPFLAGS= -g -L 2 257#SUPFILE= /usr/share/examples/cvsup/standard-supfile 258#SUPFILE1= /usr/share/examples/cvsup/secure-supfile 259#PORTSSUPFILE= /usr/share/examples/cvsup/ports-supfile 260#DOCSUPFILE= /usr/share/examples/cvsup/doc-supfile 261# 262# top(1) uses a hash table for the user names. The size of this hash 263# can be tuned to match the number of local users. The table size should 264# be a prime number approximately twice as large as the number of lines in 265# /etc/passwd. The default number is 20011. 266# 267#TOP_TABLE_SIZE= 101 268# 269# Documentation 270# 271# The list of languages and encodings to build and install 272# 273#DOC_LANG= en_US.ISO_8859-1 ru_RU.KOI8-R 274