1# $FreeBSD$ 2# 3# NOTE: Please would any committer updating this file also update the 4# make.conf(5) manual page, if necessary, which is located in 5# src/share/man/man5/make.conf.5. 6# 7# /etc/make.conf, if present, will be read by make (see 8# /usr/share/mk/sys.mk). It allows you to override macro definitions 9# to make without changing your source tree, or anything the source 10# tree installs. 11# 12# This file must be in valid Makefile syntax. 13# 14# There are additional things you can put into /etc/make.conf. 15# You have to find those in the Makefiles and documentation of 16# the source tree. 17# 18# Note, that you should not set MAKEOBJDIRPREFIX or MAKEOBJDIR 19# from make.conf (or as command line variables to make). 20# Both variables are environment variables for make and must be used as: 21# 22# env MAKEOBJDIRPREFIX=/big/directory make 23# 24# 25# The CPUTYPE variable controls which processor should be targeted for 26# generated code. This controls processor-specific optimizations in 27# certain code (currently only OpenSSL) as well as modifying the value 28# of CFLAGS to contain the appropriate optimization directive to gcc. 29# The automatic setting of CFLAGS may be overridden using the 30# NO_CPU_CFLAGS variable below. 31# Currently the following CPU types are recognized: 32# Intel x86 architecture: 33# (AMD CPUs) opteron athlon64 athlon-mp athlon-xp athlon-4 34# athlon-tbird athlon k8 k6-3 k6-2 k6 k5 35# (Intel CPUs) core2 core nocona pentium4m pentium4 prescott 36# pentium3m pentium3 pentium-m pentium2 37# pentiumpro pentium-mmx pentium i486 i386 38# (Via CPUs) c3 c3-2 39# AMD64 architecture: opteron, athlon64, nocona, prescott, core2 40# Intel ia64 architecture: itanium2, itanium 41# SPARC-V9 architecture: v9 (generic 64-bit V9), ultrasparc (default 42# if omitted), ultrasparc3 43# 44# (?= allows to buildworld for a different CPUTYPE.) 45# 46#CPUTYPE?=pentium3 47#NO_CPU_CFLAGS= # Don't add -march=<cpu> to CFLAGS automatically 48#NO_CPU_COPTFLAGS= # Don't add -march=<cpu> to COPTFLAGS automatically 49# 50# CFLAGS controls the compiler settings used when compiling C code. 51# Note that optimization settings other than -O and -O2 are not recommended 52# or supported for compiling the world or the kernel - please revert any 53# nonstandard optimization settings to "-O" or "-O2 -fno-strict-aliasing" 54# before submitting bug reports without patches to the developers. 55# 56# Compiling with -fstrict-aliasing optimization breaks some [notable] ports. 57# GCC turns on -fstrict-aliasing optimization at all levels above -O[1], so 58# explicitly turn it off when using compiling with the -O2 optimization level. 59# 60#CFLAGS= -O2 -fno-strict-aliasing -pipe 61# 62# CXXFLAGS controls the compiler settings used when compiling C++ code. 63# Note that CXXFLAGS is initially set to the value of CFLAGS. If you wish 64# to add to CXXFLAGS value, "+=" must be used rather than "=". Using "=" 65# alone will remove the often needed contents of CFLAGS from CXXFLAGS. 66# 67#CXXFLAGS+= -fconserve-space 68# 69# MAKE_SHELL controls the shell used internally by make(1) to process the 70# command scripts in makefiles. Three shells are supported, sh, ksh, and 71# csh. Using sh is most common, and advised. Using ksh *may* work, but is 72# not guaranteed to. Using csh is absurd. The default is to use sh. 73# 74#MAKE_SHELL?=sh 75# 76# BDECFLAGS are a set of gcc warning settings that Bruce Evans has suggested 77# for use in developing FreeBSD and testing changes. They can be used by 78# putting "CFLAGS+=${BDECFLAGS}" in /etc/make.conf. -Wconversion is not 79# included here due to compiler bugs, e.g., mkdir()'s mode_t argument. 80# 81#BDECFLAGS= -W -Wall -ansi -pedantic -Wbad-function-cast -Wcast-align \ 82# -Wcast-qual -Wchar-subscripts -Winline \ 83# -Wmissing-prototypes -Wnested-externs -Wpointer-arith \ 84# -Wredundant-decls -Wshadow -Wstrict-prototypes -Wwrite-strings 85# 86# To compile just the kernel with special optimizations, you should use 87# this instead of CFLAGS (which is not applicable to kernel builds anyway). 88# There is very little to gain by using higher optimization levels, and doing 89# so can cause problems. 90# 91#COPTFLAGS= -O -pipe 92# 93# Compare before install 94#INSTALL=install -C 95# 96# Mtree will follow symlinks 97#MTREE_FOLLOWS_SYMLINKS= -L 98# 99# To enable installing ssh(1) with the setuid bit turned on 100#ENABLE_SUID_SSH= 101# 102# To enable installing newgrp(1) with the setuid bit turned on. 103# Without the setuid bit, newgrp cannot change users' groups. 104#ENABLE_SUID_NEWGRP= 105# 106# To avoid building various parts of the base system: 107#NO_MODULES= # do not build modules with the kernel 108#NO_SHARE= # do not go into the share subdir 109#NO_SHARED= # build /bin and /sbin statically linked (bad idea) 110# 111# Variables that control how ppp(8) is built. 112#PPP_NO_NAT= # do not build with NAT support (see make.conf(5)) 113#PPP_NO_NETGRAPH= # do not build with Netgraph support 114#PPP_NO_RADIUS= # do not build with RADIUS support 115#PPP_NO_SUID= # build with normal permissions 116# 117#TRACEROUTE_NO_IPSEC= # do not build traceroute(8) with IPSEC support 118# 119# To build sys/modules when building the world (our old way of doing things) 120#MODULES_WITH_WORLD= # do not build modules when building kernel 121# 122# The list of modules to build instead of all of them. 123#MODULES_OVERRIDE= linux ipfw 124# 125# The list of modules to never build, applied *after* MODULES_OVERRIDE. 126#WITHOUT_MODULES= bktr plip 127# 128# If you do not want unformatted manual pages to be compressed 129# when they are installed: 130# 131#NO_MANCOMPRESS= 132# 133# 134# Default format for system documentation, depends on your printer. 135# Set this to "ascii" for simple printers or screen 136# 137#PRINTERDEVICE= ps 138# 139# 140# How long to wait for a console keypress before booting the default kernel. 141# This value is approximately in milliseconds. Keypresses are accepted by the 142# BIOS before booting from disk, making it possible to give custom boot 143# parameters even when this is set to 0. 144# 145#BOOTWAIT=0 146#BOOTWAIT=30000 147# 148# By default, the system will always use the keyboard/video card as system 149# console. However, the boot blocks may be dynamically configured to use a 150# serial port in addition to or instead of the keyboard/video console. 151# 152# By default we use COM1 as our serial console port *if* we're going to use 153# a serial port as our console at all. Alter as necessary. 154# 155# COM1: = 0x3F8, COM2: = 0x2F8, COM3: = 0x3E8, COM4: = 0x2E8 156# 157#BOOT_COMCONSOLE_PORT= 0x3F8 158# 159# The default serial console speed is 9600. Set the speed to a larger value 160# for better interactive response. 161# 162#BOOT_COMCONSOLE_SPEED= 115200 163# 164# By default the 'pxeboot' loader retrieves the kernel via NFS. Defining 165# this and recompiling /usr/src/sys/boot will cause it to retrieve the kernel 166# via TFTP. This allows pxeboot to load a custom BOOTP diskless kernel yet 167# still mount the server's '/' (i.e. rather than load the server's kernel). 168# 169#LOADER_TFTP_SUPPORT= YES 170# 171# 172# Kerberos 5 su (k5su) 173# If you want to use the k5su utility, define this to have it installed 174# set-user-ID. 175#ENABLE_SUID_K5SU= 176# 177# 178# CVSup update flags. Edit SUPFILE settings to reflect whichever distribution 179# file(s) you use on your site (see /usr/share/examples/cvsup/README for more 180# information on CVSup and these files). To use, do "make update" in /usr/src. 181# 182#SUP_UPDATE= 183# 184#SUP= /usr/bin/csup 185#SUPFLAGS= -L 2 186#SUPHOST= cvsup.uk.FreeBSD.org 187#SUPFILE= /usr/share/examples/cvsup/standard-supfile 188#PORTSSUPFILE= /usr/share/examples/cvsup/ports-supfile 189#DOCSUPFILE= /usr/share/examples/cvsup/doc-supfile 190# 191# top(1) uses a hash table for the user names. The size of this hash 192# can be tuned to match the number of local users. The table size should 193# be a prime number approximately twice as large as the number of lines in 194# /etc/passwd. The default number is 20011. 195# 196#TOP_TABLE_SIZE= 101 197# 198# Documentation 199# 200# The list of languages and encodings to build and install 201# 202#DOC_LANG= en_US.ISO8859-1 ru_RU.KOI8-R 203# 204# 205# sendmail 206# 207# The following sets the default m4 configuration file to use at 208# install time. Use with caution as a make install will overwrite 209# any existing /etc/mail/sendmail.cf. Note that SENDMAIL_CF is now 210# deprecated. The value should be a fully qualified path name. 211# 212#SENDMAIL_MC=/etc/mail/myconfig.mc 213# 214# The following sets the default m4 configuration file for mail 215# submission to use at install time. Use with caution as a make 216# install will overwrite any existing /etc/mail/submit.cf. The 217# value should be a fully qualified path name. 218# 219#SENDMAIL_SUBMIT_MC=/etc/mail/mysubmit.mc 220# 221# If you need to build additional .cf files during a make buildworld, 222# include the full paths to the .mc files in SENDMAIL_ADDITIONAL_MC. 223# 224#SENDMAIL_ADDITIONAL_MC=/etc/mail/foo.mc /etc/mail/bar.mc 225# 226# The following overrides the default location for the m4 configuration 227# files used to build a .cf file from a .mc file. 228# 229#SENDMAIL_CF_DIR=/usr/local/share/sendmail/cf 230# 231# Setting the following variable modifies the flags passed to m4 when 232# building a .cf file from a .mc file. It can be used to enable 233# features disabled by default. 234# 235#SENDMAIL_M4_FLAGS= 236# 237# Setting the following variables modifies the build environment for 238# sendmail and its related utilities. For example, SASL support can be 239# added with settings such as: 240# 241# with SASLv1: 242# SENDMAIL_CFLAGS=-I/usr/local/include/sasl1 -DSASL 243# SENDMAIL_LDFLAGS=-L/usr/local/lib 244# SENDMAIL_LDADD=-lsasl 245# 246# with SASLv2: 247# SENDMAIL_CFLAGS=-I/usr/local/include -DSASL=2 248# SENDMAIL_LDFLAGS=-L/usr/local/lib 249# SENDMAIL_LDADD=-lsasl2 250# 251# Note: If you are using Cyrus SASL with other applications which require 252# access to the sasldb file, you should add the following to your 253# sendmail.mc file: 254# 255# define(`confDONT_BLAME_SENDMAIL',`GroupReadableSASLDBFile') 256# 257#SENDMAIL_CFLAGS= 258#SENDMAIL_LDFLAGS= 259#SENDMAIL_LDADD= 260#SENDMAIL_DPADD= 261# 262# Setting SENDMAIL_SET_USER_ID will install the sendmail binary as a 263# set-user-ID root binary instead of a set-group-ID smmsp binary and will 264# prevent the installation of /etc/mail/submit.cf. 265# This is a deprecated mode of operation. See etc/mail/README for more 266# information. 267# 268#SENDMAIL_SET_USER_ID= 269# 270# The permissions to use on alias and map databases generated using 271# /etc/mail/Makefile. Defaults to 0640. 272# 273#SENDMAIL_MAP_PERMS= 274# 275# 276# It is also possible to set variables in make.conf which will only be 277# used when compiling a specific port. For more details see make(1). 278# 279#.if ${.CURDIR:M*/irc/irssi-devel*} 280#WITH_DEBUG=YES 281#.endif 282# 283# Another approach is to use /usr/ports/ports-mgmt/portconf which has 284# its own config file for port specific options. 285