1# $FreeBSD$ 2# 3# NOTE: Please would any committer updating this file also update the 4# make.conf(5) manual page, if necessary, which is located in 5# src/share/man/man5/make.conf.5. 6# 7# /etc/make.conf, if present, will be read by make (see 8# /usr/share/mk/sys.mk). It allows you to override macro definitions 9# to make without changing your source tree, or anything the source 10# tree installs. 11# 12# This file must be in valid Makefile syntax. 13# 14# There are additional things you can put into /etc/make.conf. 15# You have to find those in the Makefiles and documentation of 16# the source tree. 17# 18# 19# The CPUTYPE variable controls which processor should be targeted for 20# generated code. This controls processor-specific optimizations in 21# certain code (currently only OpenSSL) as well as modifying the value 22# of CFLAGS to contain the appropriate optimization directive to gcc. 23# The automatic setting of CFLAGS may be overridden using the 24# NO_CPU_CFLAGS variable below. 25# Currently the following CPU types are recognized: 26# Intel x86 architecture: 27# (AMD CPUs) athlon-mp athlon-xp athlon-4 athlon-tbird athlon k6-3 28# k6-2 k6 k5 29# (Intel CPUs) p4 p3 p2 i686 i586/mmx i586 i486 i386 30# Alpha/AXP architecture: ev67 ev6 pca56 ev56 ev5 ev45 ev4 31# Intel ia64 architecture: itanium 32# 33# (?= allows to buildworld for a different CPUTYPE.) 34# 35#CPUTYPE?=i686 36#NO_CPU_CFLAGS= true # Don't add -march=<cpu> to CFLAGS automatically 37#NO_CPU_COPTFLAGS=true # Don't add -march=<cpu> to COPTFLAGS automatically 38# 39# CFLAGS controls the compiler settings used when compiling C code. 40# Note that optimization settings above -O (-O2, ...) are not recommended 41# or supported for compiling the world or the kernel - please revert any 42# nonstandard optimization settings to "-O" before submitting bug reports 43# to the developers. 44# Note also that at this time the -O2 setting is known to produce BROKEN 45# CODE on the Alpha platform. 46# 47#CFLAGS= -O -pipe 48# 49# CXXFLAGS controls the compiler settings used when compiling C++ code. 50# Note that CXXFLAGS is initially set to the value of CFLAGS. If you wish 51# to add to CXXFLAGS value, "+=" must be used rather than "=". Using "=" 52# alone will remove the often needed contents of CFLAGS from CXXFLAGS. 53# 54#CXXFLAGS+= -fmemoize-lookups -fsave-memoized 55# 56# MAKE_SHELL controls the shell used internally by make(1) to process the 57# command scripts in makefiles. Three shells are supported, sh, ksh, and 58# csh. Using sh is most common, and advised. Using ksh *may* work, but is 59# not guaranteed to. Using csh is absurd. The default is to use sh. 60# 61#MAKE_SHELL?=sh 62# 63# BDECFLAGS are a set of gcc warning settings that Bruce Evans has suggested 64# for use in developing FreeBSD and testing changes. They can be used by 65# putting "CFLAGS+=${BDECFLAGS}" in /etc/make.conf. -Wconversion is not 66# included here due to compiler bugs, e.g., mkdir()'s mode_t argument. 67# 68#BDECFLAGS= -W -Wall -ansi -pedantic -Wbad-function-cast -Wcast-align \ 69# -Wcast-qual -Wchar-subscripts -Winline \ 70# -Wmissing-prototypes -Wnested-externs -Wpointer-arith \ 71# -Wredundant-decls -Wshadow -Wstrict-prototypes -Wwrite-strings 72# 73# To compile just the kernel with special optimizations, you should use 74# this instead of CFLAGS (which is not applicable to kernel builds anyway). 75# There is very little to gain by using higher optimization levels, and doing 76# so can cause problems. 77# 78#COPTFLAGS= -O -pipe 79# 80# To build the system compiler such that it forces high optimization levels to 81# a lower one. GCC -O2+ is known to trigger known optimizer bugs at various 82# times -- this is worse on the Alpha platform. The value assigned here will 83# be the highest optimization value used. 84#WANT_FORCE_OPTIMIZATION_DOWNGRADE=1 85# 86# Compare before install 87#INSTALL=install -C 88# 89# Mtree will follow symlinks 90#MTREE_FOLLOWS_SYMLINKS= -L 91# 92# To build ppp with normal permissions 93#PPP_NOSUID= true 94# 95# To enable installing ssh(1) with the setuid bit turned on 96#ENABLE_SUID_SSH= true 97# 98# To enable installing newgrp(1) with the setuid bit turned on. 99# Without the setuid bit, newgrp cannot change users' groups. 100#ENABLE_SUID_NEWGRP= true 101# 102# To avoid building various parts of the base system: 103#NO_CVS= true # do not build CVS 104#NO_CXX= true # do not build C++ and friends 105#NO_BIND= true # do not build BIND 106#NO_FORTRAN= true # do not build g77 and related libraries 107#NO_GDB= true # do not build GDB 108#NO_I4B= true # do not build isdn4bsd package 109#NO_IPFILTER= true # do not build IP Filter package 110#NO_LPR= true # do not build lpr and related programs 111#NO_MAILWRAPPER=true # do not build the mailwrapper(8) MTA selector 112#NO_MODULES= true # do not build modules with the kernel 113#NO_OBJC= true # do not build Objective C support 114#NO_OPENSSH= true # do not build OpenSSH 115#NO_OPENSSL= true # do not build OpenSSL (implies NO_OPENSSH) 116#NO_SENDMAIL= true # do not build sendmail and related programs 117#NO_SHAREDOCS= true # do not build the 4.4BSD legacy docs 118#NO_TCSH= true # do not build and install /bin/csh (which is tcsh) 119#NO_X= true # do not compile in XWindows support (e.g. doscmd) 120#NOCRYPT= true # do not build any crypto code 121#NOGAMES= true # do not build games (games/ subdir) 122#NOINFO= true # do not make or install info files 123#NOLIBC_R= true # do not build libc_r (re-entrant version of libc) 124#NOPROFILE= true # Avoid compiling profiled libraries 125#NOSECURE= true # do not build crypto code in secure/ subdir 126#NOSHARE= true # do not go into the share subdir 127# 128# To build the OpenSSL manpages, uncomment the following. These are not 129# built by default because they clobber a number of system manpages with 130# manpages describing parts of the OpenSSL toolkit, including passwd(1), 131# err(3), md5(3), and others. 132# 133#WANT_OPENSSL_MANPAGES= true 134# 135# To build sys/modules when building the world (our old way of doing things) 136#MODULES_WITH_WORLD=true # do not build modules when building kernel 137# 138# The list of modules to build instead of all of them. 139#MODULES_OVERRIDE= linux ipfw 140# 141# If you always want to build the Linux ext2fs kernel module. 142#WANT_EXT2FS_MODULE=yes 143# 144# The following controls building optional IDEA code in libcrypto and 145# certain ports. Patents are involved - you must not use this unless 146# you either have a license or fall within patent 'fair use' 147# provisions. 148# 149# *** It is YOUR RESPONSIBILITY to determine if you can use this! *** 150# 151# IDEA is patented in the USA and many European countries - thought to 152# be OK to use for any non-commercial use. This is optional. 153#MAKE_IDEA= YES # IDEA (128 bit symmetric encryption) 154# 155# If you do not want unformatted manual pages to be compressed 156# when they are installed: 157# 158#NOMANCOMPRESS= true 159# 160# 161# If you want the "compat" shared libraries installed as part of your normal 162# builds, uncomment these: 163# 164#COMPAT1X= yes 165#COMPAT20= yes 166#COMPAT21= yes 167#COMPAT22= yes 168#COMPAT3X= yes 169#COMPAT4X= yes 170# 171# 172# Default format for system documentation, depends on your printer. 173# Set this to "ascii" for simple printers or screen 174# 175#PRINTERDEVICE= ps 176# 177# 178# How long to wait for a console keypress before booting the default kernel. 179# This value is approximately in milliseconds. Keypresses are accepted by the 180# BIOS before booting from disk, making it possible to give custom boot 181# parameters even when this is set to 0. 182# 183#BOOTWAIT=0 184#BOOTWAIT=30000 185# 186# By default, the system will always use the keyboard/video card as system 187# console. However, the boot blocks may be dynamically configured to use a 188# serial port in addition to or instead of the keyboard/video console. 189# 190# By default we use COM1 as our serial console port *if* we're going to use 191# a serial port as our console at all. Alter as necessary. 192# 193# COM1: = 0x3F8, COM2: = 0x2F8, COM3: = 0x3E8, COM4: = 0x2E8 194# 195#BOOT_COMCONSOLE_PORT= 0x3F8 196# 197# The default serial console speed is 9600. Set the speed to a larger value 198# for better interactive response. 199# 200#BOOT_COMCONSOLE_SPEED= 115200 201# 202# By default the 'pxeboot' loader retrieves the kernel via NFS. Defining 203# this and recompiling /usr/src/sys/boot will cause it to retrieve the kernel 204# via TFTP. This allows pxeboot to load a custom BOOTP diskless kernel yet 205# still mount the server's '/' (i.e. rather than load the server's kernel). 206# 207#LOADER_TFTP_SUPPORT= YES 208# 209# 210# Kerberos IV 211# If you want KerberosIV (KTH eBones), define this: 212# 213#MAKE_KERBEROS4= yes 214# 215# 216# Kerberos 5 217# If you want Kerberos 5 (KTH Heimdal), define this: 218# 219#MAKE_KERBEROS5= yes 220# 221# Kerberos 5 su (k5su) 222# If you want to use the k5su utility, define this to have it installed 223# set-user-ID. 224#ENABLE_SUID_K5SU= yes 225# 226# 227# Kerberos5 228# If you want to install MIT Kerberos5 port somewhere other than /usr/local, 229# define this (this is also used to tell ssh1 that kerberos is needed): 230# 231#KRB5_HOME= /usr/local 232# 233# 234# CVSup update flags. Edit SUPFILE settings to reflect whichever distribution 235# file(s) you use on your site (see /usr/share/examples/cvsup/README for more 236# information on CVSup and these files). To use, do "make update" in /usr/src. 237# 238#SUP_UPDATE= yes 239# 240#SUP= /usr/local/bin/cvsup 241#SUPFLAGS= -g -L 2 242#SUPHOST= cvsup.uk.FreeBSD.org 243#SUPFILE= /usr/share/examples/cvsup/standard-supfile 244#PORTSSUPFILE= /usr/share/examples/cvsup/ports-supfile 245#DOCSUPFILE= /usr/share/examples/cvsup/doc-supfile 246# 247# top(1) uses a hash table for the user names. The size of this hash 248# can be tuned to match the number of local users. The table size should 249# be a prime number approximately twice as large as the number of lines in 250# /etc/passwd. The default number is 20011. 251# 252#TOP_TABLE_SIZE= 101 253# 254# Documentation 255# 256# The list of languages and encodings to build and install 257# 258#DOC_LANG= en_US.ISO8859-1 ru_RU.KOI8-R 259# 260# 261# sendmail 262# 263# The following sets the default m4 configuration file to use at 264# install time. Use with caution as a make install will overwrite 265# any existing /etc/mail/sendmail.cf. Note that SENDMAIL_CF is now 266# deprecated. The value should be a fully qualified path name. 267# Avoid using a value of /etc/mail/sendmail.mc as a buildworld will 268# create /etc/mail/sendmail.cf before installworld installs an 269# updated sendmail binary. 270# 271#SENDMAIL_MC=/etc/mail/myconfig.mc 272# 273# The following sets the default m4 configuration file for mail 274# submission to use at install time. Use with caution as a make 275# install will overwrite any existing /etc/mail/submit.cf. The 276# value should be a fully qualified path name. 277# Avoid using a value of /etc/mail/submit.mc as a buildworld will 278# create /etc/mail/submit.cf before installworld installs an 279# updated sendmail binary. 280# 281#SENDMAIL_SUBMIT_MC=/etc/mail/mysubmit.mc 282# 283# If you need to build additional .cf files during a make buildworld, 284# include the full paths to the .mc files in SENDMAIL_ADDITIONAL_MC. 285# Avoid using a value of /etc/mail/sendmail.mc as a buildworld will 286# create /etc/mail/sendmail.cf before installworld installs an 287# updated sendmail binary. 288# 289#SENDMAIL_ADDITIONAL_MC=/etc/mail/foo.mc /etc/mail/bar.mc 290# 291# Setting the following variable modifies the flags passed to m4 when 292# building a .cf file from a .mc file. It can be used to enable 293# features disabled by default. 294# 295#SENDMAIL_M4_FLAGS= 296# 297# Setting the following variables modifies the build environment for 298# sendmail and its related utilities. For example, SASL support can be 299# added with settings such as: 300# 301# with SASLv1: 302# SENDMAIL_CFLAGS=-I/usr/local/include/sasl1 -DSASL 303# SENDMAIL_LDFLAGS=-L/usr/local/lib 304# SENDMAIL_LDADD=-lsasl 305# 306# with SASLv2: 307# SENDMAIL_CFLAGS=-I/usr/local/include -DSASL=2 308# SENDMAIL_LDFLAGS=-L/usr/local/lib 309# SENDMAIL_LDADD=-lsasl2 310# 311# Note: If you are using Cyrus SASL with other applications which require 312# access to the sasldb file, you should add the following to your 313# sendmail.mc file: 314# 315# define(`confDONT_BLAME_SENDMAIL',`GroupReadableSASLDBFile') 316# 317#SENDMAIL_CFLAGS= 318#SENDMAIL_LDFLAGS= 319#SENDMAIL_LDADD= 320#SENDMAIL_DPADD= 321# 322# Setting SENDMAIL_SET_USER_ID will install the sendmail binary as a 323# set-user-ID root binary instead of a set-group-ID smmsp binary and will 324# prevent the installation of /etc/mail/submit.cf. 325# This is a deprecated mode of operation. See etc/mail/README for more 326# information. 327# 328#SENDMAIL_SET_USER_ID= 329# 330# The permissions to use on alias and map databases generated using 331# /etc/mail/Makefile. Defaults to 0640. 332# 333#SENDMAIL_MAP_PERMS= 334