1# 2# NOTE: Please would any committer updating this file also update the 3# make.conf(5) manual page, if necessary, which is located in 4# src/share/man/man5/make.conf.5. 5# 6# /etc/make.conf, if present, will be read by make (see 7# /usr/share/mk/sys.mk). It allows you to override macro definitions 8# to make without changing your source tree, or anything the source 9# tree installs. 10# 11# This file must be in valid Makefile syntax. 12# 13# There are additional things you can put into /etc/make.conf. 14# You have to find those in the Makefiles and documentation of 15# the source tree. 16# 17# Note, that you should not set MAKEOBJDIRPREFIX or MAKEOBJDIR 18# from make.conf (or as command line variables to make). 19# Both variables are environment variables for make and must be used as: 20# 21# env MAKEOBJDIRPREFIX=/big/directory make 22# 23# 24# The CPUTYPE variable controls which processor should be targeted for 25# generated code. This controls processor-specific optimizations in 26# certain code (currently only OpenSSL) as well as modifying the value 27# of CFLAGS to contain the appropriate optimization directive to cc. 28# The automatic setting of CFLAGS may be overridden using the 29# NO_CPU_CFLAGS variable below. 30# Currently the following CPU types are recognized: 31# Intel x86 architecture: 32# (AMD CPUs) znver4, znver3, znver2, znver1, bdver4, bdver3, bdver2, 33# bdver1, btver2, btver1, amdfam10, opteron-sse3, 34# athlon64-sse3, k8-sse3, opteron, athlon64, athlon-fx, 35# k8, athlon-mp, athlon-xp, athlon-4, athlon-tbird, 36# athlon, k7, geode, k6-3, k6-2, k6 37# (Intel CPUs) alderlake, sapphirerapids, tigerlake, cooperlake, 38# cascadelake, tremont, goldmont-plus, icelake-server, 39# icelake-client, cannonlake, knm, skylake-avx512, knl, 40# goldmont, skylake, broadwell, haswell, ivybridge, 41# sandybridge, westmere, nehalem, silvermont, bonnell, 42# core2, core, nocona, pentium4m, pentium4, prescott, 43# pentium3m, pentium3, pentium-m, pentium2, pentiumpro, 44# pentium-mmx, pentium, i486 45# (VIA CPUs) c7, c3-2, c3 46# ARM architecture: armv5, armv5te, armv6, armv6t2, arm1176jzf-s, armv7, 47# armv7-a, armv7ve, generic-armv7-a, cortex-a5, 48# cortex-a7, cortex-a8, cortex-a9, cortex-a12, 49# cortex-a15, cortex-a17 50# ARM64 architecture: cortex-a53, cortex-a57, cortex-a72, 51# exynos-m1 52# 53# (?= allows to buildworld for a different CPUTYPE.) 54# 55#CPUTYPE?=pentium3 56#NO_CPU_CFLAGS= # Don't add -march=<cpu> to CFLAGS automatically 57# 58# CFLAGS controls the compiler settings used when compiling C code. 59# Note that optimization settings other than -O and -O2 are not recommended 60# or supported for compiling the world or the kernel - please revert any 61# nonstandard optimization settings 62# before submitting bug reports without patches to the developers. 63# 64# CFLAGS.arch provides a mechanism for applying CFLAGS only when building 65# the given architecture. This is useful primarily on a system used for 66# cross-building, when you have a set of flags to apply to the TARGET_ARCH 67# being cross-built but don't want those settings applied to building the 68# cross-tools or other components that run on the build host machine. 69# 70# CXXFLAGS controls the compiler settings used when compiling C++ code. 71# Note that CXXFLAGS is initially set to the value of CFLAGS. If you wish 72# to add to CXXFLAGS value, "+=" must be used rather than "=". Using "=" 73# alone will remove the often needed contents of CFLAGS from CXXFLAGS. 74# 75# Additional compiler flags can be specified that extend or override 76# default ones. However, neither the base system nor ports are guaranteed 77# to build and function without problems with non-default settings. 78# 79# CFLAGS+= -msse3 80# CXXFLAGS+= -msse3 81# CFLAGS.armv6+= -mfloat-abi=softfp 82# 83# MAKE_SHELL controls the shell used internally by make(1) to process the 84# command scripts in makefiles. Three shells are supported, sh, ksh, and 85# csh. Using sh is most common, and advised. Using ksh *may* work, but is 86# not guaranteed to. Using csh is absurd. The default is to use sh. 87# 88#MAKE_SHELL?=sh 89# 90# BDECFLAGS are a set of gcc warning settings that Bruce Evans has suggested 91# for use in developing FreeBSD and testing changes. They can be used by 92# putting "CFLAGS+=${BDECFLAGS}" in /etc/make.conf. -Wconversion is not 93# included here due to compiler bugs, e.g., mkdir()'s mode_t argument. 94# 95#BDECFLAGS= -W -Wall -ansi -pedantic -Wbad-function-cast -Wcast-align \ 96# -Wcast-qual -Wchar-subscripts -Winline \ 97# -Wmissing-prototypes -Wnested-externs -Wpointer-arith \ 98# -Wredundant-decls -Wshadow -Wstrict-prototypes -Wwrite-strings 99# 100# To compile just the kernel with special optimizations, you should use 101# this instead of CFLAGS (which is not applicable to kernel builds anyway). 102# There is very little to gain by using higher optimization levels, and doing 103# so can cause problems. 104# 105#COPTFLAGS= -O -pipe 106# 107# Compare before install. 108#INSTALL+= -C 109# 110# Mtree will follow symlinks. 111#MTREE_FOLLOWS_SYMLINKS= -L 112# 113# To enable installing newgrp(1) with the setuid bit turned on. 114# Without the setuid bit, newgrp cannot change users' groups. 115#ENABLE_SUID_NEWGRP= 116# 117# To avoid building various parts of the base system: 118#NO_MODULES= # do not build modules with the kernel 119#NO_SHARE= # do not go into the share subdir 120#NO_SHARED= # build /bin and /sbin statically linked (bad idea) 121# 122# Variables that control how ppp(8) is built. 123#PPP_NO_NAT= # do not build with NAT support (see make.conf(5)) 124#PPP_NO_NETGRAPH= # do not build with Netgraph support 125#PPP_NO_RADIUS= # do not build with RADIUS support 126#PPP_NO_SUID= # build with normal permissions 127# 128#TRACEROUTE_NO_IPSEC= # do not build traceroute(8) with IPSEC support 129# 130# To build sys/modules when building the world (our old way of doing things). 131#MODULES_WITH_WORLD= # do not build modules when building kernel 132# 133# The list of modules to build instead of all of them. 134#MODULES_OVERRIDE= linux ipfw 135# 136# The list of modules to never build, applied *after* MODULES_OVERRIDE. 137#WITHOUT_MODULES= plip 138# 139# If you do not want unformatted manual pages to be compressed 140# when they are installed: 141# 142#WITHOUT_MANCOMPRESS=t 143# 144# 145# Default format for system documentation in share/doc, depends on 146# your printer. Set this to "ascii" for simple printers or screen. 147# 148#PRINTERDEVICE= ps 149# 150# 151# How long to wait for a console keypress before booting the default kernel. 152# This value is approximately in milliseconds. Keypresses are accepted by the 153# BIOS before booting from disk, making it possible to give custom boot 154# parameters even when this is set to 0. 155# 156#BOOTWAIT=0 157#BOOTWAIT=30000 158# 159# By default, the system will always use the keyboard/video card as system 160# console. However, the boot blocks may be dynamically configured to use a 161# serial port in addition to or instead of the keyboard/video console. 162# 163# By default we use COM1 as our serial console port *if* we're going to use 164# a serial port as our console at all. Alter as necessary. 165# 166# COM1: = 0x3F8, COM2: = 0x2F8, COM3: = 0x3E8, COM4: = 0x2E8 167# 168#BOOT_COMCONSOLE_PORT= 0x3F8 169# 170# The default serial console speed is 115200. It can be set to a different 171# rate, if desired in your environment. 172# 173#BOOT_COMCONSOLE_SPEED= 9600 174# 175# By default the 'pxeboot' loader retrieves the kernel via NFS. Defining 176# this and recompiling /usr/src/stand will cause it to retrieve the kernel 177# via TFTP. This allows pxeboot to load a custom BOOTP diskless kernel yet 178# still mount the server's '/' (i.e. rather than load the server's kernel). 179# 180#LOADER_TFTP_SUPPORT= YES 181# 182# 183# Kerberos 5 su (k5su) 184# If you want to use the k5su utility, define this to have it installed 185# set-user-ID. 186#ENABLE_SUID_K5SU= 187# 188# 189# top(1) uses a hash table for the user names. The size of this hash 190# can be tuned to match the number of local users. The table size should 191# be a prime number approximately twice as large as the number of lines in 192# /etc/passwd. The default number is 20011. 193# 194#TOP_TABLE_SIZE= 101 195# 196# Documentation 197# 198# The list of languages to build and install. 199# 200#DOC_LANG= en ru 201# 202# 203# sendmail 204# 205# The following sets the default m4 configuration file to use at 206# install time. Use with caution as a make install will overwrite 207# any existing /etc/mail/sendmail.cf. Note that SENDMAIL_CF is now 208# deprecated. The value should be a fully qualified path name. 209# 210#SENDMAIL_MC=/etc/mail/myconfig.mc 211# 212# The following sets the default m4 configuration file for mail 213# submission to use at install time. Use with caution as a make 214# install will overwrite any existing /etc/mail/submit.cf. The 215# value should be a fully qualified path name. 216# 217#SENDMAIL_SUBMIT_MC=/etc/mail/mysubmit.mc 218# 219# If you need to build additional .cf files during a make buildworld, 220# include the full paths to the .mc files in SENDMAIL_ADDITIONAL_MC. 221# 222#SENDMAIL_ADDITIONAL_MC=/etc/mail/foo.mc /etc/mail/bar.mc 223# 224# The following overrides the default location for the m4 configuration 225# files used to build a .cf file from a .mc file. 226# 227#SENDMAIL_CF_DIR=/usr/local/share/sendmail/cf 228# 229# Setting the following variable modifies the flags passed to m4 when 230# building a .cf file from a .mc file. It can be used to enable 231# features disabled by default. 232# 233#SENDMAIL_M4_FLAGS= 234# 235# Setting the following variables modifies the build environment for 236# sendmail and its related utilities. For example, SASL support can be 237# added with settings such as: 238# 239# with SASLv1: 240# SENDMAIL_CFLAGS=-I/usr/local/include/sasl1 -DSASL 241# SENDMAIL_LDADD=/usr/local/lib/libsasl.so 242# 243# with SASLv2: 244# SENDMAIL_CFLAGS=-I/usr/local/include -DSASL=2 245# SENDMAIL_LDADD=/usr/local/lib/libsasl2.so 246# 247# Note: If you are using Cyrus SASL with other applications which require 248# access to the sasldb file, you should add the following to your 249# sendmail.mc file: 250# 251# define(`confDONT_BLAME_SENDMAIL',`GroupReadableSASLDBFile') 252# 253#SENDMAIL_CFLAGS= 254#SENDMAIL_LDFLAGS= 255#SENDMAIL_LDADD= 256#SENDMAIL_DPADD= 257# 258# Setting SENDMAIL_SET_USER_ID will install the sendmail binary as a 259# set-user-ID root binary instead of a set-group-ID smmsp binary and will 260# prevent the installation of /etc/mail/submit.cf. 261# This is a deprecated mode of operation. See etc/mail/README for more 262# information. 263# 264#SENDMAIL_SET_USER_ID= 265# 266# The permissions to use on alias and map databases generated using 267# /etc/mail/Makefile. Defaults to 0640. 268# 269#SENDMAIL_MAP_PERMS= 270# 271# 272# It is also possible to set variables in make.conf which will only be 273# used when compiling a specific port. For more details see make(1). 274# 275#.if ${.CURDIR:M*/irc/irssi-devel*} 276#WITH_DEBUG=YES 277#.endif 278# 279# Another approach is to use /usr/ports/ports-mgmt/portconf which has 280# its own config file for port specific options. 281