1# $FreeBSD$ 2# 3# NOTE: Please would any committer updating this file also update the 4# make.conf(5) manual page, if necessary, which is located in 5# src/share/man/man5/make.conf.5. 6# 7# /etc/make.conf, if present, will be read by make (see 8# /usr/share/mk/sys.mk). It allows you to override macro definitions 9# to make without changing your source tree, or anything the source 10# tree installs. 11# 12# This file must be in valid Makefile syntax. 13# 14# There are additional things you can put into /etc/make.conf. 15# You have to find those in the Makefiles and documentation of 16# the source tree. 17# 18# Note, that you should not set MAKEOBJDIRPREFIX or MAKEOBJDIR 19# from make.conf (or as command line variables to make). 20# Both variables are environment variables for make and must be used as: 21# 22# env MAKEOBJDIRPREFIX=/big/directory make 23# 24# 25# The CPUTYPE variable controls which processor should be targeted for 26# generated code. This controls processor-specific optimizations in 27# certain code (currently only OpenSSL) as well as modifying the value 28# of CFLAGS to contain the appropriate optimization directive to gcc. 29# The automatic setting of CFLAGS may be overridden using the 30# NO_CPU_CFLAGS variable below. 31# Currently the following CPU types are recognized: 32# Intel x86 architecture: 33# (AMD CPUs) opteron athlon64 athlon-mp athlon-xp athlon-4 34# athlon-tbird athlon k8 k6-3 k6-2 k6 k5 35# (Intel CPUs) nocona pentium4[m] prescott pentium3[m] pentium-m 36# pentium2 pentiumpro pentium-mmx pentium i486 i386 37# Alpha/AXP architecture: ev67 ev6 pca56 ev56 ev5 ev45 ev4 38# AMD64 architecture: opteron, athlon64, nocona 39# Intel ia64 architecture: itanium2, itanium 40# 41# (?= allows to buildworld for a different CPUTYPE.) 42# 43#CPUTYPE?=pentium3 44#NO_CPU_CFLAGS= # Don't add -march=<cpu> to CFLAGS automatically 45#NO_CPU_COPTFLAGS= # Don't add -march=<cpu> to COPTFLAGS automatically 46# 47# CFLAGS controls the compiler settings used when compiling C code. 48# Note that optimization settings other than -O and -O2 are not recommended 49# or supported for compiling the world or the kernel - please revert any 50# nonstandard optimization settings to "-O" or -O2 before submitting bug 51# reports without patches to the developers. 52# 53#CFLAGS= -O -pipe 54# 55# CXXFLAGS controls the compiler settings used when compiling C++ code. 56# Note that CXXFLAGS is initially set to the value of CFLAGS. If you wish 57# to add to CXXFLAGS value, "+=" must be used rather than "=". Using "=" 58# alone will remove the often needed contents of CFLAGS from CXXFLAGS. 59# 60#CXXFLAGS+= -fconserve-space 61# 62# MAKE_SHELL controls the shell used internally by make(1) to process the 63# command scripts in makefiles. Three shells are supported, sh, ksh, and 64# csh. Using sh is most common, and advised. Using ksh *may* work, but is 65# not guaranteed to. Using csh is absurd. The default is to use sh. 66# 67#MAKE_SHELL?=sh 68# 69# BDECFLAGS are a set of gcc warning settings that Bruce Evans has suggested 70# for use in developing FreeBSD and testing changes. They can be used by 71# putting "CFLAGS+=${BDECFLAGS}" in /etc/make.conf. -Wconversion is not 72# included here due to compiler bugs, e.g., mkdir()'s mode_t argument. 73# 74#BDECFLAGS= -W -Wall -ansi -pedantic -Wbad-function-cast -Wcast-align \ 75# -Wcast-qual -Wchar-subscripts -Winline \ 76# -Wmissing-prototypes -Wnested-externs -Wpointer-arith \ 77# -Wredundant-decls -Wshadow -Wstrict-prototypes -Wwrite-strings 78# 79# To compile just the kernel with special optimizations, you should use 80# this instead of CFLAGS (which is not applicable to kernel builds anyway). 81# There is very little to gain by using higher optimization levels, and doing 82# so can cause problems. 83# 84#COPTFLAGS= -O -pipe 85# 86# Compare before install 87#INSTALL=install -C 88# 89# Mtree will follow symlinks 90#MTREE_FOLLOWS_SYMLINKS= -L 91# 92# To enable installing ssh(1) with the setuid bit turned on 93#ENABLE_SUID_SSH= 94# 95# To enable installing newgrp(1) with the setuid bit turned on. 96# Without the setuid bit, newgrp cannot change users' groups. 97#ENABLE_SUID_NEWGRP= 98# 99# To avoid building various parts of the base system: 100#NO_ACPI= # do not build acpiconf(8) and related programs 101#NO_ATM= # do not build ATM related programs and libraries 102#NO_AUTHPF= # do not build and install authpf (setuid/gid) 103#NO_BLUETOOTH= # do not build Bluetooth related stuff 104#NO_BOOT= # do not build boot blocks and loader 105#NO_CRYPT= # do not build any crypto code 106#NO_CVS= # do not build CVS 107#NO_CXX= # do not build C++ and friends 108#NO_DICT= # do not build the Webster dictionary files 109#NO_DYNAMICROOT= # do not link /bin and /sbin dynamically 110#NO_FORTRAN= # do not build g77 and related libraries 111#NO_GAMES= # do not build games (games/ subdir) 112#NO_GDB= # do not build GDB 113#NO_GPIB= # do not build GPIB support 114#NO_I4B= # do not build isdn4bsd package 115#NO_INET6= # do not build IPv6 related programs and libraries 116#NO_INFO= # do not make or install info files 117#NO_IPFILTER= # do not build IP Filter package 118#NO_KERBEROS= # do not build and install Kerberos 5 (KTH Heimdal) 119#NO_LIBC_R= # do not build libc_r (re-entrant version of libc) 120#NO_LIBPTHREAD= # do not build libpthread (M:N threading library) 121#NO_LIBTHR= # do not build libthr (1:1 threading library) 122#NO_LPR= # do not build lpr and related programs 123#NO_MAILWRAPPER= # do not build the mailwrapper(8) MTA selector 124#NO_MAN= # do not build manual pages 125#NO_MODULES= # do not build modules with the kernel 126#NO_NETCAT= # do not build netcat 127#NO_NIS= # do not build NIS support and related programs. 128# # If NO_NIS is set, you might need to adopt your 129# # nsswitch.conf(5) and remove `nis' entries. 130#NO_OBJC= # do not build Objective C support 131#NO_OPENSSH= # do not build OpenSSH 132#NO_OPENSSL= # do not build OpenSSL (implies NO_KERBEROS/NO_OPENSSH) 133#NO_PF= # do not build PF firewall package 134#NO_PROFILE= # Avoid compiling profiled libraries 135#NO_RCMDS= # do not build or install BSD r* commands (rsh, etc). 136#NO_SENDMAIL= # do not build sendmail and related programs 137#NO_SHARE= # do not go into the share subdir 138#NO_SHARED= # build /bin and /sbin statically linked (bad idea) 139#NO_SHAREDOCS= # do not build the 4.4BSD legacy docs 140#NO_TCSH= # do not build and install /bin/csh (which is tcsh) 141#NO_TOOLCHAIN= # do not build programs for program development 142#NO_USB= # do not build usbd(8) and related programs 143# 144# Variables that control how ppp(8) is built. 145#PPP_NO_NAT= # do not build with NAT support (see make.conf(5)) 146#PPP_NO_NETGRAPH= # do not build with Netgraph support 147#PPP_NO_RADIUS= # do not build with RADIUS support 148#PPP_NO_SUID= # build with normal permissions 149# 150#TRACEROUTE_NO_IPSEC= # do not build traceroute(8) with IPSEC support 151# 152# Variables to control whether parts of the base BIND are built. 153# Defining NO_BIND makes all of the following BIND variables obsolete. 154# Please see the more detailed descriptions in make.conf(5). 155#NO_BIND= # Do not build any part of BIND 156#NO_BIND_DNSSEC= # Do not build dnssec-keygen, dnssec-signzone 157#NO_BIND_ETC= # Do not install files to /etc/namedb 158#NO_BIND_LIBS_LWRES= # Do not install the lwres library 159#NO_BIND_MTREE= # Do not run mtree to create chroot directories 160#NO_BIND_NAMED= # Do not build named, rndc, lwresd, etc. 161#NO_BIND_UTILS= # Do not build dig, host, nslookup, nsupdate 162#WITH_BIND_LIBS= # Install the BIND libs and include files 163# 164# To build sys/modules when building the world (our old way of doing things) 165#MODULES_WITH_WORLD= # do not build modules when building kernel 166# 167# The list of modules to build instead of all of them. 168#MODULES_OVERRIDE= linux ipfw 169# 170# The list of modules to never build, applied *after* MODULES_OVERRIDE. 171#WITHOUT_MODULES= bktr plip 172# 173# The following controls building optional IDEA code in libcrypto and 174# certain ports. Patents are involved - you must not use this unless 175# you either have a license or fall within patent 'fair use' 176# provisions. 177# 178# *** It is YOUR RESPONSIBILITY to determine if you can use this! *** 179# 180# IDEA is patented in the USA and many European countries - thought to 181# be OK to use for any non-commercial use. This is optional. 182#MAKE_IDEA= # IDEA (128 bit symmetric encryption) 183# 184# If you do not want unformatted manual pages to be compressed 185# when they are installed: 186# 187#NO_MANCOMPRESS= 188# 189# 190# Default format for system documentation, depends on your printer. 191# Set this to "ascii" for simple printers or screen 192# 193#PRINTERDEVICE= ps 194# 195# 196# How long to wait for a console keypress before booting the default kernel. 197# This value is approximately in milliseconds. Keypresses are accepted by the 198# BIOS before booting from disk, making it possible to give custom boot 199# parameters even when this is set to 0. 200# 201#BOOTWAIT=0 202#BOOTWAIT=30000 203# 204# By default, the system will always use the keyboard/video card as system 205# console. However, the boot blocks may be dynamically configured to use a 206# serial port in addition to or instead of the keyboard/video console. 207# 208# By default we use COM1 as our serial console port *if* we're going to use 209# a serial port as our console at all. Alter as necessary. 210# 211# COM1: = 0x3F8, COM2: = 0x2F8, COM3: = 0x3E8, COM4: = 0x2E8 212# 213#BOOT_COMCONSOLE_PORT= 0x3F8 214# 215# The default serial console speed is 9600. Set the speed to a larger value 216# for better interactive response. 217# 218#BOOT_COMCONSOLE_SPEED= 115200 219# 220# By default the 'pxeboot' loader retrieves the kernel via NFS. Defining 221# this and recompiling /usr/src/sys/boot will cause it to retrieve the kernel 222# via TFTP. This allows pxeboot to load a custom BOOTP diskless kernel yet 223# still mount the server's '/' (i.e. rather than load the server's kernel). 224# 225#LOADER_TFTP_SUPPORT= YES 226# 227# 228# Kerberos 5 su (k5su) 229# If you want to use the k5su utility, define this to have it installed 230# set-user-ID. 231#ENABLE_SUID_K5SU= 232# 233# 234# CVSup update flags. Edit SUPFILE settings to reflect whichever distribution 235# file(s) you use on your site (see /usr/share/examples/cvsup/README for more 236# information on CVSup and these files). To use, do "make update" in /usr/src. 237# 238#SUP_UPDATE= 239# 240#SUP= /usr/local/bin/cvsup 241#SUPFLAGS= -g -L 2 242#SUPHOST= cvsup.uk.FreeBSD.org 243#SUPFILE= /usr/share/examples/cvsup/standard-supfile 244#PORTSSUPFILE= /usr/share/examples/cvsup/ports-supfile 245#DOCSUPFILE= /usr/share/examples/cvsup/doc-supfile 246# 247# top(1) uses a hash table for the user names. The size of this hash 248# can be tuned to match the number of local users. The table size should 249# be a prime number approximately twice as large as the number of lines in 250# /etc/passwd. The default number is 20011. 251# 252#TOP_TABLE_SIZE= 101 253# 254# Documentation 255# 256# The list of languages and encodings to build and install 257# 258#DOC_LANG= en_US.ISO8859-1 ru_RU.KOI8-R 259# 260# 261# sendmail 262# 263# The following sets the default m4 configuration file to use at 264# install time. Use with caution as a make install will overwrite 265# any existing /etc/mail/sendmail.cf. Note that SENDMAIL_CF is now 266# deprecated. The value should be a fully qualified path name. 267# 268#SENDMAIL_MC=/etc/mail/myconfig.mc 269# 270# The following sets the default m4 configuration file for mail 271# submission to use at install time. Use with caution as a make 272# install will overwrite any existing /etc/mail/submit.cf. The 273# value should be a fully qualified path name. 274# 275#SENDMAIL_SUBMIT_MC=/etc/mail/mysubmit.mc 276# 277# If you need to build additional .cf files during a make buildworld, 278# include the full paths to the .mc files in SENDMAIL_ADDITIONAL_MC. 279# 280#SENDMAIL_ADDITIONAL_MC=/etc/mail/foo.mc /etc/mail/bar.mc 281# 282# The following overrides the default location for the m4 configuration 283# files used to build a .cf file from a .mc file. 284# 285#SENDMAIL_CF_DIR=/usr/local/share/sendmail/cf 286# 287# Setting the following variable modifies the flags passed to m4 when 288# building a .cf file from a .mc file. It can be used to enable 289# features disabled by default. 290# 291#SENDMAIL_M4_FLAGS= 292# 293# Setting the following variables modifies the build environment for 294# sendmail and its related utilities. For example, SASL support can be 295# added with settings such as: 296# 297# with SASLv1: 298# SENDMAIL_CFLAGS=-I/usr/local/include/sasl1 -DSASL 299# SENDMAIL_LDFLAGS=-L/usr/local/lib 300# SENDMAIL_LDADD=-lsasl 301# 302# with SASLv2: 303# SENDMAIL_CFLAGS=-I/usr/local/include -DSASL=2 304# SENDMAIL_LDFLAGS=-L/usr/local/lib 305# SENDMAIL_LDADD=-lsasl2 306# 307# Note: If you are using Cyrus SASL with other applications which require 308# access to the sasldb file, you should add the following to your 309# sendmail.mc file: 310# 311# define(`confDONT_BLAME_SENDMAIL',`GroupReadableSASLDBFile') 312# 313#SENDMAIL_CFLAGS= 314#SENDMAIL_LDFLAGS= 315#SENDMAIL_LDADD= 316#SENDMAIL_DPADD= 317# 318# Setting SENDMAIL_SET_USER_ID will install the sendmail binary as a 319# set-user-ID root binary instead of a set-group-ID smmsp binary and will 320# prevent the installation of /etc/mail/submit.cf. 321# This is a deprecated mode of operation. See etc/mail/README for more 322# information. 323# 324#SENDMAIL_SET_USER_ID= 325# 326# The permissions to use on alias and map databases generated using 327# /etc/mail/Makefile. Defaults to 0640. 328# 329#SENDMAIL_MAP_PERMS= 330# 331# wpa_supplicant 332# 333# Enable this to include 802.1X and EAP support in wpa_supplicant. 334# 802.1X with EAP requires openssl but it can be used without to 335# do things like dynamic WEP keying. The default is to build 336# wpa_supplicant only with WPA-PSK support. 337# 338#ENABLE_WPA_SUPPLICANT_EAPOL=true 339