Automatically generated by Pod::Man 4.14 (Pod::Simple 3.42)

Standard preamble:
========================================================================
..

..

.. Set up some character translations and predefined strings. \*(-- will
give an unbreakable dash, \*(PI will give pi, \*(L" will give a left
double quote, and \*(R" will give a right double quote. \*(C+ will
give a nicer C++. Capital omega is used to do unbreakable dashes and
therefore won't be available. \*(C` and \*(C' expand to `' in nroff,
nothing in troff, for use with C<>.
.tr \(*W- . ds -- \(*W- . ds PI pi . if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch . if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\" diablo 12 pitch . ds L" "" . ds R" "" . ds C` "" . ds C' "" 'br\} . ds -- \|\(em\| . ds PI \(*p . ds L" `` . ds R" '' . ds C` . ds C' 'br\}
Escape single quotes in literal strings from groff's Unicode transform.

If the F register is >0, we'll generate index entries on stderr for
titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index
entries marked with X<> in POD. Of course, you'll have to process the
output yourself in some meaningful fashion.

Avoid warning from groff about undefined register 'F'.
.. .nr rF 0 . if \nF \{\ . de IX . tm Index:\\$1\t\\n%\t"\\$2" .. . if !\nF==2 \{\ . nr % 0 . nr F 2 . \} . \} .\} .rr rF Fear. Run. Save yourself. No user-serviceable parts.
. \" fudge factors for nroff and troff . ds #H 0 . ds #V .8m . ds #F .3m . ds #[ \f1 . ds #] .\} . ds #H ((1u-(\\\\n(.fu%2u))*.13m) . ds #V .6m . ds #F 0 . ds #[ \& . ds #] \& .\} . \" simple accents for nroff and troff . ds ' \& . ds ` \& . ds ^ \& . ds , \& . ds ~ ~ . ds / .\} . ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u" . ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u' . ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u' . ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u' . ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u' . ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u' .\} . \" troff and (daisy-wheel) nroff accents . \" corrections for vroff . \" for low resolution devices (crt and lpr) \{\ . ds : e . ds 8 ss . ds o a . ds d- d\h'-1'\(ga . ds D- D\h'-1'\(hy . ds th \o'bp' . ds Th \o'LP' . ds ae ae . ds Ae AE .\} ========================================================================

Title "OPENSSL-VERIFICATION-OPTIONS 1ossl" For nroff, turn off justification. Always turn off hyphenation; it makes
way too many mistakes in technical documents.
openssl-verification-options - generic X.509 certificate verification options Header "SYNOPSIS" \fBopenssl \fIcommand [ options ... ] [ parameters ... ] Header "DESCRIPTION" There are many situations where X.509 certificates are verified within the OpenSSL libraries and in various OpenSSL commands.

Certificate verification is implemented by X509_verify_cert\|(3). It is a complicated process consisting of a number of steps and depending on numerous options. The most important of them are detailed in the following sections.

In a nutshell, a valid chain of certificates needs to be built up and verified starting from the target certificate that is to be verified and ending in a certificate that due to some policy is trusted. Verification is done relative to the given purpose, which is the intended use of the target certificate, such as \s-1SSL\s0 server, or by default for any purpose.

The details of how each OpenSSL command handles errors are documented on the specific command page.

\s-1DANE\s0 support is documented in openssl-s_client\|(1), \fBSSL_CTX_dane_enable\|(3), SSL_set1_host\|(3), \fBX509_VERIFY_PARAM_set_flags\|(3), and X509_check_host\|(3).

Subsection "Trust Anchors" In general, according to \s-1RFC 4158\s0 and \s-1RFC 5280,\s0 a trust anchor is any public key and related subject distinguished name (\s-1DN\s0) that for some reason is considered trusted and thus is acceptable as the root of a chain of certificates.

In practice, trust anchors are given in the form of certificates, where their essential fields are the public key and the subject \s-1DN.\s0 In addition to the requirements in \s-1RFC 5280,\s0 OpenSSL checks the validity period of such certificates and makes use of some further fields. In particular, the subject key identifier extension, if present, is used for matching trust anchors during chain building.

In the most simple and common case, trust anchors are by default all self-signed \*(L"root\*(R" \s-1CA\s0 certificates that are placed in the trust store, which is a collection of certificates that are trusted for certain uses. This is akin to what is used in the trust stores of Mozilla Firefox, or Apple's and Microsoft's certificate stores, ...

From the OpenSSL perspective, a trust anchor is a certificate that should be augmented with an explicit designation for which uses of a target certificate the certificate may serve as a trust anchor. In \s-1PEM\s0 encoding, this is indicated by the \*(C`TRUSTED CERTIFICATE\*(C' string. Such a designation provides a set of positive trust attributes explicitly stating trust for the listed purposes and/or a set of negative trust attributes explicitly rejecting the use for the listed purposes. The purposes are encoded using the values defined for the extended key usages (EKUs) that may be given in X.509 extensions of end-entity certificates. See also the \*(L"Extended Key Usage\*(R" section below.

The currently recognized uses are \fBclientAuth (\s-1SSL\s0 client use), serverAuth (\s-1SSL\s0 server use), \fBemailProtection (S/MIME email use), codeSigning (object signer use), \fBOCSPSigning (\s-1OCSP\s0 responder use), \s-1OCSP\s0 (\s-1OCSP\s0 request use), \fBtimeStamping (\s-1TSA\s0 server use), and anyExtendedKeyUsage. As of OpenSSL 1.1.0, the last of these blocks all uses when rejected or enables all uses when trusted.

A certificate, which may be \s-1CA\s0 certificate or an end-entity certificate, is considered a trust anchor for the given use if and only if all the following conditions hold:

It is an an element of the trust store. It does not have a negative trust attribute rejecting the given use. It has a positive trust attribute accepting the given use or (by default) one of the following compatibility conditions apply: It is self-signed or the -partial_chain option is given (which corresponds to the X509_V_FLAG_PARTIAL_CHAIN flag being set). Subsection "Certification Path Building" First, a certificate chain is built up starting from the target certificate and ending in a trust anchor.

The chain is built up iteratively, looking up in turn a certificate with suitable key usage that matches as an issuer of the current \*(L"subject\*(R" certificate as described below. If there is such a certificate, the first one found that is currently valid is taken, otherwise the one that expired most recently of all such certificates. For efficiency, no backtracking is performed, thus any further candidate issuer certificates that would match equally are ignored.

When a self-signed certificate has been added, chain construction stops. In this case it must fully match a trust anchor, otherwise chain building fails.

A candidate issuer certificate matches a subject certificate if all of the following conditions hold:

Its subject name matches the issuer name of the subject certificate. If the subject certificate has an authority key identifier extension, each of its sub-fields equals the corresponding subject key identifier, serial number, and issuer field of the candidate issuer certificate, as far as the respective fields are present in both certificates. The certificate signature algorithm used to sign the subject certificate is supported and equals the public key algorithm of the candidate issuer certificate.

The lookup first searches for issuer certificates in the trust store. If it does not find a match there it consults the list of untrusted (\*(L"intermediate\*(R" \s-1CA\s0) certificates, if provided.

Subsection "Certification Path Validation" When the certificate chain building process was successful the chain components and their links are checked thoroughly.

The first step is to check that each certificate is well-formed. Part of these checks are enabled only if the -x509_strict option is given.

The second step is to check the extensions of every untrusted certificate for consistency with the supplied purpose. If the -purpose option is not given then no such checks are done except for \s-1SSL/TLS\s0 connection setup, where by default \*(C`sslserver\*(C' or \*(C`sslclient\*(C', are checked. The target or \*(L"leaf\*(R" certificate, as well as any other untrusted certificates, must have extensions compatible with the specified purpose. All certificates except the target or \*(L"leaf\*(R" must also be valid \s-1CA\s0 certificates. The precise extensions required are described in more detail in \*(L"\s-1CERTIFICATE EXTENSIONS\*(R"\s0 in openssl-x509\|(1).

The third step is to check the trust settings on the last certificate (which typically is a self-signed root \s-1CA\s0 certificate). It must be trusted for the given use. For compatibility with previous versions of OpenSSL, a self-signed certificate with no trust attributes is considered to be valid for all uses.

The fourth, and final, step is to check the validity of the certificate chain. For each element in the chain, including the root \s-1CA\s0 certificate, the validity period as specified by the \*(C`notBefore\*(C' and \*(C`notAfter\*(C' fields is checked against the current system time. The -attime flag may be used to use a reference time other than \*(L"now.\*(R" The certificate signature is checked as well (except for the signature of the typically self-signed root \s-1CA\s0 certificate, which is verified only if the -check_ss_sig option is given). When verifying a certificate signature the keyUsage extension (if present) of the candidate issuer certificate is checked to permit digitalSignature for signing proxy certificates or to permit keyCertSign for signing other certificates, respectively. If all operations complete successfully then certificate is considered valid. If any operation fails then the certificate is not valid.

Header "OPTIONS" Subsection "Trusted Certificate Options" The following options specify how to supply the certificates that can be used as trust anchors for certain uses. As mentioned, a collection of such certificates is called a trust store.

Note that OpenSSL does not provide a default set of trust anchors. Many Linux distributions include a system default and configure OpenSSL to point to that. Mozilla maintains an influential trust store that can be found at <https://www.mozilla.org/en-US/about/governance/policies/security-group/certs/>.

The certificates to add to the trust store can be specified using following options.

Item "-CAfile file" Load the specified file which contains a certificate or several of them in case the input is in \s-1PEM\s0 or PKCS#12 format. PEM-encoded certificates may also have trust attributes set. Item "-no-CAfile" Do not load the default file of trusted certificates. Item "-CApath dir" Use the specified directory as a collection of trusted certificates, i.e., a trust store. Files should be named with the hash value of the X.509 SubjectName of each certificate. This is so that the library can extract the IssuerName, hash it, and directly lookup the file to get the issuer certificate. See openssl-rehash\|(1) for information on creating this type of directory. Item "-no-CApath" Do not use the default directory of trusted certificates. Item "-CAstore uri" Use uri as a store of \s-1CA\s0 certificates. The \s-1URI\s0 may indicate a single certificate, as well as a collection of them. With URIs in the \*(C`file:\*(C' scheme, this acts as -CAfile or \fB-CApath, depending on if the \s-1URI\s0 indicates a single file or directory. See ossl_store-file\|(7) for more information on the \*(C`file:\*(C' scheme. .Sp These certificates are also used when building the server certificate chain (for example with openssl-s_server\|(1)) or client certificate chain (for example with openssl-s_time\|(1)). Item "-no-CAstore" Do not use the default store of trusted \s-1CA\s0 certificates. Subsection "Verification Options" The certificate verification can be fine-tuned with the following flags. Item "-verbose" Print extra information about the operations being performed. Item "-attime timestamp" Perform validation checks using time specified by timestamp and not current system time. timestamp is the number of seconds since January 1, 1970 (i.e., the Unix Epoch). Item "-no_check_time" This option suppresses checking the validity period of certificates and CRLs against the current time. If option -attime is used to specify a verification time, the check is not suppressed. Item "-x509_strict" This disables non-compliant workarounds for broken certificates. Thus errors are thrown on certificates not compliant with \s-1RFC 5280.\s0 .Sp When this option is set, among others, the following certificate well-formedness conditions are checked: Item "-ignore_critical" Normally if an unhandled critical extension is present that is not supported by OpenSSL the certificate is rejected (as required by \s-1RFC5280\s0). If this option is set critical extensions are ignored. Item "-issuer_checks" Ignored. Item "-crl_check" Checks end entity certificate validity by attempting to look up a valid \s-1CRL.\s0 If a valid \s-1CRL\s0 cannot be found an error occurs. Item "-crl_check_all" Checks the validity of all certificates in the chain by attempting to look up valid CRLs. Item "-use_deltas" Enable support for delta CRLs. Item "-extended_crl" Enable extended \s-1CRL\s0 features such as indirect CRLs and alternate \s-1CRL\s0 signing keys. Item "-suiteB_128_only, -suiteB_128, -suiteB_192" Enable the Suite B mode operation at 128 bit Level of Security, 128 bit or 192 bit, or only 192 bit Level of Security respectively. See \s-1RFC6460\s0 for details. In particular the supported signature algorithms are reduced to support only \s-1ECDSA\s0 and \s-1SHA256\s0 or \s-1SHA384\s0 and only the elliptic curves P-256 and P-384. Item "-auth_level level" Set the certificate chain authentication security level to level. The authentication security level determines the acceptable signature and public key strength when verifying certificate chains. For a certificate chain to validate, the public keys of all the certificates must meet the specified security level. The signature algorithm security level is enforced for all the certificates in the chain except for the chain's \fItrust anchor, which is either directly trusted or validated by means other than its signature. See SSL_CTX_set_security_level\|(3) for the definitions of the available levels. The default security level is -1, or \*(L"not set\*(R". At security level 0 or lower all algorithms are acceptable. Security level 1 requires at least 80-bit-equivalent security and is broadly interoperable, though it will, for example, reject \s-1MD5\s0 signatures or \s-1RSA\s0 keys shorter than 1024 bits. Item "-partial_chain" Allow verification to succeed if an incomplete chain can be built. That is, a chain ending in a certificate that normally would not be trusted (because it has no matching positive trust attributes and is not self-signed) but is an element of the trust store. This certificate may be self-issued or belong to an intermediate \s-1CA.\s0 Item "-check_ss_sig" Verify the signature of the last certificate in a chain if the certificate is supposedly self-signed. This is prohibited and will result in an error if it is a non-conforming \s-1CA\s0 certificate with key usage restrictions not including the keyCertSign bit. This verification is disabled by default because it doesn't add any security. Item "-allow_proxy_certs" Allow the verification of proxy certificates. Item "-trusted_first" As of OpenSSL 1.1.0 this option is on by default and cannot be disabled. .Sp When constructing the certificate chain, the trusted certificates specified via -CAfile, -CApath, -CAstore or -trusted are always used before any certificates specified via -untrusted. Item "-no_alt_chains" As of OpenSSL 1.1.0, since -trusted_first always on, this option has no effect. Item "-trusted file" Parse file as a set of one or more certificates. Each of them qualifies as trusted if has a suitable positive trust attribute or it is self-signed or the -partial_chain option is specified. This option implies the -no-CAfile, -no-CApath, and -no-CAstore options and it cannot be used with the -CAfile, -CApath or -CAstore options, so only certificates specified using the -trusted option are trust anchors. This option may be used multiple times. Item "-untrusted file" Parse file as a set of one or more certificates. All certificates (typically of intermediate CAs) are considered untrusted and may be used to construct a certificate chain from the target certificate to a trust anchor. This option may be used multiple times. Item "-policy arg" Enable policy processing and add arg to the user-initial-policy-set (see \s-1RFC5280\s0). The policy arg can be an object name an \s-1OID\s0 in numeric form. This argument can appear more than once. Item "-explicit_policy" Set policy variable require-explicit-policy (see \s-1RFC5280\s0). Item "-policy_check" Enables certificate policy processing. Item "-policy_print" Print out diagnostics related to policy processing. Item "-inhibit_any" Set policy variable inhibit-any-policy (see \s-1RFC5280\s0). Item "-inhibit_map" Set policy variable inhibit-policy-mapping (see \s-1RFC5280\s0). Item "-purpose purpose" The intended use for the certificate. Currently defined purposes are \*(C`sslclient\*(C', \*(C`sslserver\*(C', \*(C`nssslserver\*(C', \f(CW\*(C`smimesign\*(C', \*(C`smimeencrypt\*(C', \*(C`crlsign\*(C', \*(C`ocsphelper\*(C', \*(C`timestampsign\*(C', and \*(C`any\*(C'. If peer certificate verification is enabled, by default the \s-1TLS\s0 implementation as well as the commands s_client and s_server check for consistency with \s-1TLS\s0 server or \s-1TLS\s0 client use, respectively. .Sp While \s-1IETF RFC 5280\s0 says that id-kp-serverAuth and id-kp-clientAuth are only for \s-1WWW\s0 use, in practice they are used for all kinds of \s-1TLS\s0 clients and servers, and this is what OpenSSL assumes as well. Item "-verify_depth num" Limit the certificate chain to num intermediate \s-1CA\s0 certificates. A maximal depth chain can have up to num+2 certificates, since neither the end-entity certificate nor the trust-anchor certificate count against the \fB-verify_depth limit. Item "-verify_email email" Verify if email matches the email address in Subject Alternative Name or the email in the subject Distinguished Name. Item "-verify_hostname hostname" Verify if hostname matches \s-1DNS\s0 name in Subject Alternative Name or Common Name in the subject certificate. Item "-verify_ip ip" Verify if ip matches the \s-1IP\s0 address in Subject Alternative Name of the subject certificate. Item "-verify_name name" Use default verification policies like trust model and required certificate policies identified by name. The trust model determines which auxiliary trust or reject OIDs are applicable to verifying the given certificate chain. They can be given using the -addtrust and -addreject options for openssl-x509\|(1). Supported policy names include: default, pkcs7, smime_sign, \fBssl_client, ssl_server. These mimics the combinations of purpose and trust settings used in \s-1SSL, CMS\s0 and S/MIME. As of OpenSSL 1.1.0, the trust model is inferred from the purpose when not specified, so the -verify_name options are functionally equivalent to the corresponding -purpose settings. Subsection "Extended Verification Options" Sometimes there may be more than one certificate chain leading to an end-entity certificate. This usually happens when a root or intermediate \s-1CA\s0 signs a certificate for another a \s-1CA\s0 in other organization. Another reason is when a \s-1CA\s0 might have intermediates that use two different signature formats, such as a \s-1SHA-1\s0 and a \s-1SHA-256\s0 digest.

The following options can be used to provide data that will allow the OpenSSL command to generate an alternative chain.

Item "-xkey infile, -xcert infile, -xchain" Specify an extra certificate, private key and certificate chain. These behave in the same manner as the -cert, -key and -cert_chain options. When specified, the callback returning the first valid chain will be in use by the client. Item "-xchain_build" Specify whether the application should build the certificate chain to be provided to the server for the extra certificates via the -xkey, \fB-xcert, and -xchain options. Item "-xcertform DER|PEM|P12" The input format for the extra certificate. This option has no effect and is retained for backward compatibility only. Item "-xkeyform DER|PEM|P12" The input format for the extra key. This option has no effect and is retained for backward compatibility only. Subsection "Certificate Extensions" Options like -purpose lead to checking the certificate extensions, which determine what the target certificate and intermediate \s-1CA\s0 certificates can be used for.

Basic Constraints Subsection "Basic Constraints"

The basicConstraints extension \s-1CA\s0 flag is used to determine whether the certificate can be used as a \s-1CA.\s0 If the \s-1CA\s0 flag is true then it is a \s-1CA,\s0 if the \s-1CA\s0 flag is false then it is not a \s-1CA.\s0 All CAs should have the \s-1CA\s0 flag set to true.

If the basicConstraints extension is absent, which includes the case that it is an X.509v1 certificate, then the certificate is considered to be a \*(L"possible \s-1CA\*(R"\s0 and other extensions are checked according to the intended use of the certificate. The treatment of certificates without basicConstraints as a \s-1CA\s0 is presently supported, but this could change in the future.

Key Usage Subsection "Key Usage"

If the keyUsage extension is present then additional restraints are made on the uses of the certificate. A \s-1CA\s0 certificate must have the keyCertSign bit set if the keyUsage extension is present.

Extended Key Usage Subsection "Extended Key Usage"

The extKeyUsage (\s-1EKU\s0) extension places additional restrictions on the certificate uses. If this extension is present (whether critical or not) the key can only be used for the purposes specified.

A complete description of each check is given below. The comments about basicConstraints and keyUsage and X.509v1 certificates above apply to all \s-1CA\s0 certificates.

Item "SSL Client" The extended key usage extension must be absent or include the \*(L"web client authentication\*(R" \s-1OID.\s0 The keyUsage extension must be absent or it must have the digitalSignature bit set. The Netscape certificate type must be absent or it must have the \s-1SSL\s0 client bit set. Item "SSL Client CA" The extended key usage extension must be absent or include the \*(L"web client authentication\*(R" \s-1OID.\s0 The Netscape certificate type must be absent or it must have the \s-1SSL CA\s0 bit set. This is used as a work around if the basicConstraints extension is absent. Item "SSL Server" The extended key usage extension must be absent or include the \*(L"web server authentication\*(R" and/or one of the \s-1SGC\s0 OIDs. The keyUsage extension must be absent or it must have the digitalSignature, the keyEncipherment set or both bits set. The Netscape certificate type must be absent or have the \s-1SSL\s0 server bit set. Item "SSL Server CA" The extended key usage extension must be absent or include the \*(L"web server authentication\*(R" and/or one of the \s-1SGC\s0 OIDs. The Netscape certificate type must be absent or the \s-1SSL CA\s0 bit must be set. This is used as a work around if the basicConstraints extension is absent. Item "Netscape SSL Server" For Netscape \s-1SSL\s0 clients to connect to an \s-1SSL\s0 server it must have the keyEncipherment bit set if the keyUsage extension is present. This isn't always valid because some cipher suites use the key for digital signing. Otherwise it is the same as a normal \s-1SSL\s0 server. Item "Common S/MIME Client Tests" The extended key usage extension must be absent or include the \*(L"email protection\*(R" \s-1OID.\s0 The Netscape certificate type must be absent or should have the S/MIME bit set. If the S/MIME bit is not set in the Netscape certificate type then the \s-1SSL\s0 client bit is tolerated as an alternative but a warning is shown. This is because some Verisign certificates don't set the S/MIME bit. Item "S/MIME Signing" In addition to the common S/MIME client tests the digitalSignature bit or the nonRepudiation bit must be set if the keyUsage extension is present. Item "S/MIME Encryption" In addition to the common S/MIME tests the keyEncipherment bit must be set if the keyUsage extension is present. Item "S/MIME CA" The extended key usage extension must be absent or include the \*(L"email protection\*(R" \s-1OID.\s0 The Netscape certificate type must be absent or must have the S/MIME \s-1CA\s0 bit set. This is used as a work around if the basicConstraints extension is absent. Item "CRL Signing" The keyUsage extension must be absent or it must have the \s-1CRL\s0 signing bit set. Item "CRL Signing CA" The normal \s-1CA\s0 tests apply. Except in this case the basicConstraints extension must be present. Header "BUGS" The issuer checks still suffer from limitations in the underlying X509_LOOKUP \s-1API.\s0 One consequence of this is that trusted certificates with matching subject name must appear in a file (as specified by the -CAfile option), a directory (as specified by -CApath), or a store (as specified by -CAstore). If there are multiple such matches, possibly in multiple locations, only the first one (in the mentioned order of locations) is recognised. Header "SEE ALSO" \fBX509_verify_cert\|(3), \fBopenssl-verify\|(1), \fBopenssl-ocsp\|(1), \fBopenssl-ts\|(1), \fBopenssl-s_client\|(1), \fBopenssl-s_server\|(1), \fBopenssl-smime\|(1), \fBopenssl-cmp\|(1), \fBopenssl-cms\|(1) Header "HISTORY" The checks enabled by -x509_strict have been extended in OpenSSL 3.0. Header "COPYRIGHT" Copyright 2000-2023 The OpenSSL Project Authors. All Rights Reserved.

Licensed under the Apache License 2.0 (the \*(L"License\*(R"). You may not use this file except in compliance with the License. You can obtain a copy in the file \s-1LICENSE\s0 in the source distribution or at <https://www.openssl.org/source/license.html>.