Automatically generated by Pod::Man 4.14 (Pod::Simple 3.40) Standard preamble: ========================================================================..
..
..
Set up some character translations and predefined strings. \*(-- will give an unbreakable dash, \*(PI will give pi, \*(L" will give a left double quote, and \*(R" will give a right double quote. \*(C+ will give a nicer C++. Capital omega is used to do unbreakable dashes and therefore won't be available. \*(C` and \*(C' expand to `' in nroff, nothing in troff, for use with C<>..tr \(*W-
. ds -- \(*W-
. ds PI pi
. if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch
. if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\" diablo 12 pitch
. ds L" ""
. ds R" ""
. ds C` ""
. ds C' ""
'br\}
. ds -- \|\(em\|
. ds PI \(*p
. ds L" ``
. ds R" ''
. ds C`
. ds C'
'br\}
Escape single quotes in literal strings from groff's Unicode transform. If the F register is >0, we'll generate index entries on stderr for titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index entries marked with X<> in POD. Of course, you'll have to process the output yourself in some meaningful fashion. Avoid warning from groff about undefined register 'F'...
.nr rF 0
. if \nF \{\
. de IX
. tm Index:\\$1\t\\n%\t"\\$2"
..
. if !\nF==2 \{\
. nr % 0
. nr F 2
. \}
. \}
.\}
.rr rF
Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). Fear. Run. Save yourself. No user-serviceable parts.. \" fudge factors for nroff and troff
. ds #H 0
. ds #V .8m
. ds #F .3m
. ds #[ \f1
. ds #]
.\}
. ds #H ((1u-(\\\\n(.fu%2u))*.13m)
. ds #V .6m
. ds #F 0
. ds #[ \&
. ds #] \&
.\}
. \" simple accents for nroff and troff
. ds ' \&
. ds ` \&
. ds ^ \&
. ds , \&
. ds ~ ~
. ds /
.\}
. ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u"
. ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u'
. ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u'
. ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u'
. ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u'
. ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u'
.\}
. \" troff and (daisy-wheel) nroff accents
. \" corrections for vroff
. \" for low resolution devices (crt and lpr)
\{\
. ds : e
. ds 8 ss
. ds o a
. ds d- d\h'-1'\(ga
. ds D- D\h'-1'\(hy
. ds th \o'bp'
. ds Th \o'LP'
. ds ae ae
. ds Ae AE
.\}
======================================================================== Title "OPENSSL-S_TIME 1" OPENSSL-S_TIME 1 "2023-08-02" "3.0.10" "OpenSSL"
For nroff, turn off justification. Always turn off hyphenation; it makes way too many mistakes in technical documents. "NAME"
openssl-s_time -
SSL/
TLS performance timing program
"SYNOPSIS"
Header "SYNOPSIS" \fBopenssl
s_time
[
-help]
[
-connect host:
port]
[
-www page]
[
-cert filename]
[
-key filename]
[
-reuse]
[
-new]
[
-verify depth]
[
-time seconds]
[
-ssl3]
[
-tls1]
[
-tls1_1]
[
-tls1_2]
[
-tls1_3]
[
-bugs]
[
-cipher cipherlist]
[
-ciphersuites val]
[
-nameopt option]
[
-cafile file]
[
-CAfile file]
[
-no-CAfile]
[
-CApath dir]
[
-no-CApath]
[
-CAstore uri]
[
-no-CAstore]
[
-provider name]
[
-provider-path path]
[
-propquery propq]
"DESCRIPTION"
Header "DESCRIPTION" This command implements a generic \
s-1SSL/
TLS\s0 client which
connects to a remote host using \
s-1SSL/
TLS.\s0 It can request a page from the server
and includes the time to transfer the payload data in its timing measurements.
It measures the number of connections within a given timeframe, the amount of
data transferred (if any), and calculates the average time spent for one
connection.
"OPTIONS"
Header "OPTIONS" "-help" 4
Item "-help" Print out a usage message.
"-connect host:port" 4
Item "-connect host:port" This specifies the host and optional port to connect to.
"-www page" 4
Item "-www page" This specifies the page to \s-1GET\s0 from the server. A value of '/' gets the
\
fIindex.html page. If this parameter is not specified, then this command
will only perform the handshake to establish \s-1SSL\s0 connections but not transfer
any payload data.
"-cert certname" 4
Item "-cert certname" The certificate to use, if one is requested by the server. The default is
not to use a certificate. The file is in \s-1PEM\s0 format.
"-key keyfile" 4
Item "-key keyfile" The private key to use. If not specified then the certificate file will
be used. The file is in \s-1PEM\s0 format.
"-verify depth" 4
Item "-verify depth" The verify depth to use. This specifies the maximum length of the
server certificate chain and turns on server certificate verification.
Currently the verify operation continues after errors so all the problems
with a certificate chain can be seen. As a side effect the connection
will never fail due to a server certificate verify failure.
"-new" 4
Item "-new" Performs the timing test using a new session \s-1ID\s0 for each connection.
If neither
-new nor
-reuse are specified, they are both on by default
and executed in sequence.
"-reuse" 4
Item "-reuse" Performs the timing test using the same session \s-1ID\s0; this can be used as a test
that session caching is working. If neither
-new nor
-reuse are
specified, they are both on by default and executed in sequence.
"-bugs" 4
Item "-bugs" There are several known bugs in \s-1SSL\s0 and \s-1TLS\s0 implementations. Adding this
option enables various workarounds.
"-cipher cipherlist" 4
Item "-cipher cipherlist" This allows the TLSv1.2 and below cipher list sent by the client to be modified.
This list will be combined with any TLSv1.3 ciphersuites that have been
configured. Although the server determines which cipher suite is used it should
take the first supported cipher in the list sent by the client. See
\fBopenssl-ciphers\|(1) for more information.
"-ciphersuites val" 4
Item "-ciphersuites val" This allows the TLSv1.3 ciphersuites sent by the client to be modified. This
list will be combined with any TLSv1.2 and below ciphersuites that have been
configured. Although the server determines which cipher suite is used it should
take the first supported cipher in the list sent by the client. See
\fBopenssl-ciphers\|(1) for more information. The format for this list is a
simple colon (\*(L":\*(R") separated list of TLSv1.3 ciphersuite names.
"-time length" 4
Item "-time length" Specifies how long (in seconds) this command should establish connections
and optionally transfer payload data from a server. Server and client
performance and the link speed determine how many connections it
can establish.
"-nameopt option" 4
Item "-nameopt option" This specifies how the subject or issuer names are displayed.
See
openssl-namedisplay-options\|(1) for details.
"-CAfile file, -no-CAfile, -CApath dir, -no-CApath, -CAstore uri, -no-CAstore" 4
Item "-CAfile file, -no-CAfile, -CApath dir, -no-CApath, -CAstore uri, -no-CAstore" See \*(L"Trusted Certificate Options\*(R" in
openssl-verification-options\|(1) for details.
"-provider name" 4
Item "-provider name" 0
"-provider-path path" 4
Item "-provider-path path" "-propquery propq" 4
Item "-propquery propq"
See \*(L"Provider Options\*(R" in openssl\|(1), provider\|(7), and property\|(7).
"-cafile file" 4
Item "-cafile file" This is an obsolete synonym for
-CAfile.
"-ssl3, -tls1, -tls1_1, -tls1_2, -tls1_3" 4
Item "-ssl3, -tls1, -tls1_1, -tls1_2, -tls1_3" See \*(L"\s-1TLS\s0 Version Options\*(R" in
openssl\|(1).
"NOTES"
Header "NOTES" This command can be used to measure the performance of an \s-1SSL\s0 connection.
To connect to an \s-1SSL HTTP\s0 server and get the default page the command
.Vb 1
openssl s_time -connect servername:443 -www / -CApath yourdir -CAfile yourfile.pem -cipher commoncipher [-ssl3]
.Ve
would typically be used (https uses port 443). commoncipher is a cipher to
which both client and server can agree, see the openssl-ciphers\|(1) command
for details.
If the handshake fails then there are several possible causes, if it is
nothing obvious like no client certificate then the -bugs and
\fB-ssl3 options can be tried
in case it is a buggy server. In particular you should play with these
options before submitting a bug report to an OpenSSL mailing list.
A frequent problem when attempting to get client certificates working
is that a web client complains it has no certificates or gives an empty
list to choose from. This is normally because the server is not sending
the clients certificate authority in its \*(L"acceptable \s-1CA\s0 list\*(R" when it
requests a certificate. By using openssl-s_client\|(1) the \s-1CA\s0 list can be
viewed and checked. However, some servers only request client authentication
after a specific \s-1URL\s0 is requested. To obtain the list in this case it
is necessary to use the -prexit option of openssl-s_client\|(1) and
send an \s-1HTTP\s0 request for an appropriate page.
If a certificate is specified on the command line using the -cert
option it will not be used unless the server specifically requests
a client certificate. Therefore, merely including a client certificate
on the command line is no guarantee that the certificate works.
"BUGS"
Header "BUGS" Because this program does not have all the options of the
\fBopenssl-s_client\|(1) program to turn protocols on and off, you may not
be able to measure the performance of all protocols with all servers.
The -verify option should really exit if the server verification
fails.
"HISTORY"
Header "HISTORY" The
-cafile option was deprecated in OpenSSL 3.0.
"SEE ALSO"
Header "SEE ALSO" \fBopenssl\|(1),
\fBopenssl-s_client\|(1),
\fBopenssl-s_server\|(1),
\fBopenssl-ciphers\|(1),
\fBossl_store-file\|(7)
"COPYRIGHT"
Header "COPYRIGHT" Copyright 2004-2021 The OpenSSL Project Authors. All Rights Reserved.
Licensed under the Apache License 2.0 (the \*(L"License\*(R"). You may not use
this file except in compliance with the License. You can obtain a copy
in the file \s-1LICENSE\s0 in the source distribution or at
<https://www.openssl.org/source/license.html>.