Automatically generated by Pod::Man 4.14 (Pod::Simple 3.42)

Standard preamble:
========================================================================
..

..

.. Set up some character translations and predefined strings. \*(-- will
give an unbreakable dash, \*(PI will give pi, \*(L" will give a left
double quote, and \*(R" will give a right double quote. \*(C+ will
give a nicer C++. Capital omega is used to do unbreakable dashes and
therefore won't be available. \*(C` and \*(C' expand to `' in nroff,
nothing in troff, for use with C<>.
.tr \(*W- . ds -- \(*W- . ds PI pi . if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch . if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\" diablo 12 pitch . ds L" "" . ds R" "" . ds C` "" . ds C' "" 'br\} . ds -- \|\(em\| . ds PI \(*p . ds L" `` . ds R" '' . ds C` . ds C' 'br\}
Escape single quotes in literal strings from groff's Unicode transform.

If the F register is >0, we'll generate index entries on stderr for
titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index
entries marked with X<> in POD. Of course, you'll have to process the
output yourself in some meaningful fashion.

Avoid warning from groff about undefined register 'F'.
.. .nr rF 0 . if \nF \{\ . de IX . tm Index:\\$1\t\\n%\t"\\$2" .. . if !\nF==2 \{\ . nr % 0 . nr F 2 . \} . \} .\} .rr rF Fear. Run. Save yourself. No user-serviceable parts.
. \" fudge factors for nroff and troff . ds #H 0 . ds #V .8m . ds #F .3m . ds #[ \f1 . ds #] .\} . ds #H ((1u-(\\\\n(.fu%2u))*.13m) . ds #V .6m . ds #F 0 . ds #[ \& . ds #] \& .\} . \" simple accents for nroff and troff . ds ' \& . ds ` \& . ds ^ \& . ds , \& . ds ~ ~ . ds / .\} . ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u" . ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u' . ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u' . ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u' . ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u' . ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u' .\} . \" troff and (daisy-wheel) nroff accents . \" corrections for vroff . \" for low resolution devices (crt and lpr) \{\ . ds : e . ds 8 ss . ds o a . ds d- d\h'-1'\(ga . ds D- D\h'-1'\(hy . ds th \o'bp' . ds Th \o'LP' . ds ae ae . ds Ae AE .\} ========================================================================

Title "OPENSSL-S_SERVER 1ossl" For nroff, turn off justification. Always turn off hyphenation; it makes
way too many mistakes in technical documents.
openssl-s_server - SSL/TLS server program Header "SYNOPSIS" \fBopenssl s_server [-help] [-port +int] [-accept val] [-unix val] [-4] [-6] [-unlink] [-context val] [-verify int] [-Verify int] [-cert infile] [-cert2 infile] [-certform \s-1DER\s0|\s-1PEM\s0|P12] [-cert_chain infile] [-build_chain] [-serverinfo val] [-key filename|uri] [-key2 filename|uri] [-keyform \s-1DER\s0|\s-1PEM\s0|P12|\s-1ENGINE\s0] [-pass val] [-dcert infile] [-dcertform \s-1DER\s0|\s-1PEM\s0|P12] [-dcert_chain infile] [-dkey filename|uri] [-dkeyform \s-1DER\s0|\s-1PEM\s0|P12|\s-1ENGINE\s0] [-dpass val] [-nbio_test] [-crlf] [-debug] [-msg] [-msgfile outfile] [-state] [-nocert] [-quiet] [-no_resume_ephemeral] [-www] [-WWW] [-http_server_binmode] [-no_ca_names] [-ignore_unexpected_eof] [-servername] [-servername_fatal] [-tlsextdebug] [-HTTP] [-id_prefix val] [-keymatexport val] [-keymatexportlen +int] [-CRL infile] [-CRLform \s-1DER\s0|\s-1PEM\s0] [-crl_download] [-chainCAfile infile] [-chainCApath dir] [-chainCAstore uri] [-verifyCAfile infile] [-verifyCApath dir] [-verifyCAstore uri] [-no_cache] [-ext_cache] [-verify_return_error] [-verify_quiet] [-ign_eof] [-no_ign_eof] [-no_etm] [-status] [-status_verbose] [-status_timeout int] [-proxy [http[s]://][userinfo@]host[:port][/path]] [-no_proxy addresses] [-status_url val] [-status_file infile] [-ssl_config val] [-trace] [-security_debug] [-security_debug_verbose] [-brief] [-rev] [-async] [-max_send_frag +int] [-split_send_frag +int] [-max_pipelines +int] [-naccept +int] [-read_buf +int] [-bugs] [-no_comp] [-comp] [-no_ticket] [-serverpref] [-legacy_renegotiation] [-no_renegotiation] [-no_resumption_on_reneg] [-allow_no_dhe_kex] [-prioritize_chacha] [-strict] [-sigalgs val] [-client_sigalgs val] [-groups val] [-curves val] [-named_curve val] [-cipher val] [-ciphersuites val] [-dhparam infile] [-record_padding val] [-debug_broken_protocol] [-nbio] [-psk_identity val] [-psk_hint val] [-psk val] [-psk_session file] [-srpvfile infile] [-srpuserseed val] [-timeout] [-mtu +int] [-listen] [-sctp] [-sctp_label_bug] [-use_srtp val] [-no_dhe] [-nextprotoneg val] [-alpn val] [-sendfile] [-keylogfile outfile] [-recv_max_early_data int] [-max_early_data int] [-early_data] [-stateless] [-anti_replay] [-no_anti_replay] [-num_tickets] [-nameopt option] [-no_ssl3] [-no_tls1] [-no_tls1_1] [-no_tls1_2] [-no_tls1_3] [-ssl3] [-tls1] [-tls1_1] [-tls1_2] [-tls1_3] [-dtls] [-dtls1] [-dtls1_2] [-allow_proxy_certs] [-attime timestamp] [-no_check_time] [-check_ss_sig] [-crl_check] [-crl_check_all] [-explicit_policy] [-extended_crl] [-ignore_critical] [-inhibit_any] [-inhibit_map] [-partial_chain] [-policy arg] [-policy_check] [-policy_print] [-purpose purpose] [-suiteB_128] [-suiteB_128_only] [-suiteB_192] [-trusted_first] [-no_alt_chains] [-use_deltas] [-auth_level num] [-verify_depth num] [-verify_email email] [-verify_hostname hostname] [-verify_ip ip] [-verify_name name] [-x509_strict] [-issuer_checks] [-bugs] [-no_comp] [-comp] [-no_ticket] [-serverpref] [-client_renegotiation] [-legacy_renegotiation] [-no_renegotiation] [-no_resumption_on_reneg] [-legacy_server_connect] [-no_legacy_server_connect] [-no_etm] [-allow_no_dhe_kex] [-prioritize_chacha] [-strict] [-sigalgs algs] [-client_sigalgs algs] [-groups groups] [-curves curves] [-named_curve curve] [-cipher ciphers] [-ciphersuites 1.3ciphers] [-min_protocol minprot] [-max_protocol maxprot] [-record_padding padding] [-debug_broken_protocol] [-no_middlebox] [-xkey infile] [-xcert file] [-xchain file] [-xchain_build file] [-xcertform \s-1DER\s0|\s-1PEM\s0]> [-xkeyform \s-1DER\s0|\s-1PEM\s0]> [-CAfile file] [-no-CAfile] [-CApath dir] [-no-CApath] [-CAstore uri] [-no-CAstore] [-rand files] [-writerand file] [-engine id] [-provider name] [-provider-path path] [-propquery propq] Header "DESCRIPTION" This command implements a generic \s-1SSL/TLS\s0 server which listens for connections on a given port using \s-1SSL/TLS.\s0 Header "OPTIONS" In addition to the options below, this command also supports the common and server only options documented \*(L"Supported Command Line Commands\*(R" in SSL_CONF_cmd\|(3) Item "-help" Print out a usage message. Item "-port +int" The \s-1TCP\s0 port to listen on for connections. If not specified 4433 is used. Item "-accept val" The optional \s-1TCP\s0 host and port to listen on for connections. If not specified, *:4433 is used. Item "-unix val" Unix domain socket to accept on. Item "-4" Use IPv4 only. Item "-6" Use IPv6 only. Item "-unlink" For -unix, unlink any existing socket first. Item "-context val" Sets the \s-1SSL\s0 context id. It can be given any string value. If this option is not present a default value will be used. Item "-verify int, -Verify int" The verify depth to use. This specifies the maximum length of the client certificate chain and makes the server request a certificate from the client. With the -verify option a certificate is requested but the client does not have to send one, with the -Verify option the client must supply a certificate or an error occurs. .Sp If the cipher suite cannot request a client certificate (for example an anonymous cipher suite or \s-1PSK\s0) this option has no effect. Item "-cert infile" The certificate to use, most servers cipher suites require the use of a certificate and some require a certificate with a certain public key type: for example the \s-1DSS\s0 cipher suites require a certificate containing a \s-1DSS\s0 (\s-1DSA\s0) key. If not specified then the filename server.pem will be used. Item "-cert2 infile" The certificate file to use for servername; default is \*(C`server2.pem\*(C'. Item "-certform DER|PEM|P12" The server certificate file format; unspecified by default. See openssl-format-options\|(1) for details. Item "-cert_chain" A file or \s-1URI\s0 of untrusted certificates to use when attempting to build the certificate chain related to the certificate specified via the -cert option. The input can be in \s-1PEM, DER,\s0 or PKCS#12 format. Item "-build_chain" Specify whether the application should build the server certificate chain to be provided to the client. Item "-serverinfo val" A file containing one or more blocks of \s-1PEM\s0 data. Each \s-1PEM\s0 block must encode a \s-1TLS\s0 ServerHello extension (2 bytes type, 2 bytes length, followed by \*(L"length\*(R" bytes of extension data). If the client sends an empty \s-1TLS\s0 ClientHello extension matching the type, the corresponding ServerHello extension will be returned. Item "-key filename|uri" The private key to use. If not specified then the certificate file will be used. Item "-key2 filename|uri" The private Key file to use for servername if not given via -cert2. Item "-keyform DER|PEM|P12|ENGINE" The key format; unspecified by default. See openssl-format-options\|(1) for details. Item "-pass val" The private key and certificate file password source. For more information about the format of val, see openssl-passphrase-options\|(1). Item "-dcert infile, -dkey filename|uri" Specify an additional certificate and private key, these behave in the same manner as the -cert and -key options except there is no default if they are not specified (no additional certificate and key is used). As noted above some cipher suites require a certificate containing a key of a certain type. Some cipher suites need a certificate carrying an \s-1RSA\s0 key and some a \s-1DSS\s0 (\s-1DSA\s0) key. By using \s-1RSA\s0 and \s-1DSS\s0 certificates and keys a server can support clients which only support \s-1RSA\s0 or \s-1DSS\s0 cipher suites by using an appropriate certificate. Item "-dcert_chain" A file or \s-1URI\s0 of untrusted certificates to use when attempting to build the server certificate chain when a certificate specified via the -dcert option is in use. The input can be in \s-1PEM, DER,\s0 or PKCS#12 format. Item "-dcertform DER|PEM|P12" The format of the additional certificate file; unspecified by default. See openssl-format-options\|(1) for details. Item "-dkeyform DER|PEM|P12|ENGINE" The format of the additional private key; unspecified by default. See openssl-format-options\|(1) for details. Item "-dpass val" The passphrase for the additional private key and certificate. For more information about the format of val, see openssl-passphrase-options\|(1). Item "-nbio_test" Tests non blocking I/O. Item "-crlf" This option translated a line feed from the terminal into \s-1CR+LF.\s0 Item "-debug" Print extensive debugging information including a hex dump of all traffic. Item "-security_debug" Print output from \s-1SSL/TLS\s0 security framework. Item "-security_debug_verbose" Print more output from \s-1SSL/TLS\s0 security framework Item "-msg" Show all protocol messages with hex dump. Item "-msgfile outfile" File to send output of -msg or -trace to, default standard output. Item "-state" Prints the \s-1SSL\s0 session states. Item "-CRL infile" The \s-1CRL\s0 file to use. Item "-CRLform DER|PEM" The \s-1CRL\s0 file format; unspecified by default. See openssl-format-options\|(1) for details. Item "-crl_download" Download CRLs from distribution points given in \s-1CDP\s0 extensions of certificates Item "-verifyCAfile filename" A file in \s-1PEM\s0 format \s-1CA\s0 containing trusted certificates to use for verifying client certificates. Item "-verifyCApath dir" A directory containing trusted certificates to use for verifying client certificates. This directory must be in \*(L"hash format\*(R", see openssl-verify\|(1) for more information. Item "-verifyCAstore uri" The \s-1URI\s0 of a store containing trusted certificates to use for verifying client certificates. Item "-chainCAfile file" A file in \s-1PEM\s0 format containing trusted certificates to use when attempting to build the server certificate chain. Item "-chainCApath dir" A directory containing trusted certificates to use for building the server certificate chain provided to the client. This directory must be in \*(L"hash format\*(R", see openssl-verify\|(1) for more information. Item "-chainCAstore uri" The \s-1URI\s0 of a store containing trusted certificates to use for building the server certificate chain provided to the client. The \s-1URI\s0 may indicate a single certificate, as well as a collection of them. With URIs in the \*(C`file:\*(C' scheme, this acts as -chainCAfile or \fB-chainCApath, depending on if the \s-1URI\s0 indicates a directory or a single file. See ossl_store-file\|(7) for more information on the \*(C`file:\*(C' scheme. Item "-nocert" If this option is set then no certificate is used. This restricts the cipher suites available to the anonymous ones (currently just anonymous \s-1DH\s0). Item "-quiet" Inhibit printing of session and certificate information. Item "-no_resume_ephemeral" Disable caching and tickets if ephemeral (\s-1EC\s0)DH is used. Item "-tlsextdebug" Print a hex dump of any \s-1TLS\s0 extensions received from the server. Item "-www" Sends a status message back to the client when it connects. This includes information about the ciphers used and various session parameters. The output is in \s-1HTML\s0 format so this option can be used with a web browser. The special \s-1URL\s0 \*(C`/renegcert\*(C' turns on client cert validation, and \*(C`/reneg\*(C' tells the server to request renegotiation. The -early_data option cannot be used with this option. Item "-WWW, -HTTP" Emulates a simple web server. Pages will be resolved relative to the current directory, for example if the \s-1URL\s0 \*(C`https://myhost/page.html\*(C' is requested the file ./page.html will be sent. If the -HTTP flag is used, the files are sent directly, and should contain any \s-1HTTP\s0 response headers (including status response line). If the -WWW option is used, the response headers are generated by the server, and the file extension is examined to determine the Content-Type header. Extensions of \*(C`html\*(C', \*(C`htm\*(C', and \*(C`php\*(C' are \*(C`text/html\*(C' and all others are \f(CW\*(C`text/plain\*(C'. In addition, the special \s-1URL\s0 \*(C`/stats\*(C' will return status information like the -www option. Neither of these options can be used in conjunction with -early_data. Item "-http_server_binmode" When acting as web-server (using option -WWW or -HTTP) open files requested by the client in binary mode. Item "-no_ca_names" Disable \s-1TLS\s0 Extension \s-1CA\s0 Names. You may want to disable it for security reasons or for compatibility with some Windows \s-1TLS\s0 implementations crashing when this extension is larger than 1024 bytes. Item "-ignore_unexpected_eof" Some \s-1TLS\s0 implementations do not send the mandatory close_notify alert on shutdown. If the application tries to wait for the close_notify alert but the peer closes the connection without sending it, an error is generated. When this option is enabled the peer does not need to send the close_notify alert and a closed connection will be treated as if the close_notify alert was received. For more information on shutting down a connection, see SSL_shutdown\|(3). Item "-servername" Servername for HostName \s-1TLS\s0 extension. Item "-servername_fatal" On servername mismatch send fatal alert (default: warning alert). Item "-id_prefix val" Generate \s-1SSL/TLS\s0 session IDs prefixed by val. This is mostly useful for testing any \s-1SSL/TLS\s0 code (e.g. proxies) that wish to deal with multiple servers, when each of which might be generating a unique range of session IDs (e.g. with a certain prefix). Item "-keymatexport" Export keying material using label. Item "-keymatexportlen" Export the given number of bytes of keying material; default 20. Item "-no_cache" Disable session cache. Item "-ext_cache." Disable internal cache, set up and use external cache. Item "-verify_return_error" Verification errors normally just print a message but allow the connection to continue, for debugging purposes. If this option is used, then verification errors close the connection. Item "-verify_quiet" No verify output except verify errors. Item "-ign_eof" Ignore input \s-1EOF\s0 (default: when -quiet). Item "-no_ign_eof" Do not ignore input \s-1EOF.\s0 Item "-no_etm" Disable Encrypt-then-MAC negotiation. Item "-status" Enables certificate status request support (aka \s-1OCSP\s0 stapling). Item "-status_verbose" Enables certificate status request support (aka \s-1OCSP\s0 stapling) and gives a verbose printout of the \s-1OCSP\s0 response. Item "-status_timeout int" Sets the timeout for \s-1OCSP\s0 response to int seconds. Item "-proxy [http[s]://][userinfo@]host[:port][/path]" The \s-1HTTP\s0(S) proxy server to use for reaching the \s-1OCSP\s0 server unless -no_proxy applies, see below. The proxy port defaults to 80 or 443 if the scheme is \*(C`https\*(C'; apart from that the optional \*(C`http://\*(C' or \*(C`https://\*(C' prefix is ignored, as well as any userinfo and path components. Defaults to the environment variable \*(C`http_proxy\*(C' if set, else \*(C`HTTP_PROXY\*(C' in case no \s-1TLS\s0 is used, otherwise \*(C`https_proxy\*(C' if set, else \*(C`HTTPS_PROXY\*(C'. Item "-no_proxy addresses" List of \s-1IP\s0 addresses and/or \s-1DNS\s0 names of servers not to use an \s-1HTTP\s0(S) proxy for, separated by commas and/or whitespace (where in the latter case the whole argument must be enclosed in \*(L"...\*(R"). Default is from the environment variable \*(C`no_proxy\*(C' if set, else \*(C`NO_PROXY\*(C'. Item "-status_url val" Sets a fallback responder \s-1URL\s0 to use if no responder \s-1URL\s0 is present in the server certificate. Without this option an error is returned if the server certificate does not contain a responder address. The optional userinfo and fragment \s-1URL\s0 components are ignored. Any given query component is handled as part of the path component. Item "-status_file infile" Overrides any \s-1OCSP\s0 responder URLs from the certificate and always provides the \s-1OCSP\s0 Response stored in the file. The file must be in \s-1DER\s0 format. Item "-ssl_config val" Configure \s-1SSL_CTX\s0 using the given configuration value. Item "-trace" Show verbose trace output of protocol messages. Item "-brief" Provide a brief summary of connection parameters instead of the normal verbose output. Item "-rev" Simple echo server that sends back received text reversed. Also sets -brief. Cannot be used in conjunction with -early_data. Item "-async" Switch on asynchronous mode. Cryptographic operations will be performed asynchronously. This will only have an effect if an asynchronous capable engine is also used via the -engine option. For test purposes the dummy async engine (dasync) can be used (if available). Item "-max_send_frag +int" The maximum size of data fragment to send. See SSL_CTX_set_max_send_fragment\|(3) for further information. Item "-split_send_frag +int" The size used to split data for encrypt pipelines. If more data is written in one go than this value then it will be split into multiple pipelines, up to the maximum number of pipelines defined by max_pipelines. This only has an effect if a suitable cipher suite has been negotiated, an engine that supports pipelining has been loaded, and max_pipelines is greater than 1. See \fBSSL_CTX_set_split_send_fragment\|(3) for further information. Item "-max_pipelines +int" The maximum number of encrypt/decrypt pipelines to be used. This will only have an effect if an engine has been loaded that supports pipelining (e.g. the dasync engine) and a suitable cipher suite has been negotiated. The default value is 1. See SSL_CTX_set_max_pipelines\|(3) for further information. Item "-naccept +int" The server will exit after receiving the specified number of connections, default unlimited. Item "-read_buf +int" The default read buffer size to be used for connections. This will only have an effect if the buffer size is larger than the size that would otherwise be used and pipelining is in use (see SSL_CTX_set_default_read_buffer_len\|(3) for further information). Item "-bugs" There are several known bugs in \s-1SSL\s0 and \s-1TLS\s0 implementations. Adding this option enables various workarounds. Item "-no_comp" Disable negotiation of \s-1TLS\s0 compression. \s-1TLS\s0 compression is not recommended and is off by default as of OpenSSL 1.1.0. Item "-comp" Enable negotiation of \s-1TLS\s0 compression. This option was introduced in OpenSSL 1.1.0. \s-1TLS\s0 compression is not recommended and is off by default as of OpenSSL 1.1.0. Item "-no_ticket" Disable RFC4507bis session ticket support. This option has no effect if TLSv1.3 is negotiated. See -num_tickets. Item "-num_tickets" Control the number of tickets that will be sent to the client after a full handshake in TLSv1.3. The default number of tickets is 2. This option does not affect the number of tickets sent after a resumption handshake. Item "-serverpref" Use the server's cipher preferences, rather than the client's preferences. Item "-prioritize_chacha" Prioritize ChaCha ciphers when preferred by clients. Requires -serverpref. Item "-no_resumption_on_reneg" Set the \s-1SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION\s0 option. Item "-client_sigalgs val" Signature algorithms to support for client certificate authentication (colon-separated list). Item "-named_curve val" Specifies the elliptic curve to use. \s-1NOTE:\s0 this is single curve, not a list. For a list of all possible curves, use: .Sp .Vb 1 $ openssl ecparam -list_curves .Ve Item "-cipher val" This allows the list of TLSv1.2 and below ciphersuites used by the server to be modified. This list is combined with any TLSv1.3 ciphersuites that have been configured. When the client sends a list of supported ciphers the first client cipher also included in the server list is used. Because the client specifies the preference order, the order of the server cipherlist is irrelevant. See \fBopenssl-ciphers\|(1) for more information. Item "-ciphersuites val" This allows the list of TLSv1.3 ciphersuites used by the server to be modified. This list is combined with any TLSv1.2 and below ciphersuites that have been configured. When the client sends a list of supported ciphers the first client cipher also included in the server list is used. Because the client specifies the preference order, the order of the server cipherlist is irrelevant. See \fBopenssl-ciphers\|(1) command for more information. The format for this list is a simple colon (\*(L":\*(R") separated list of TLSv1.3 ciphersuite names. Item "-dhparam infile" The \s-1DH\s0 parameter file to use. The ephemeral \s-1DH\s0 cipher suites generate keys using a set of \s-1DH\s0 parameters. If not specified then an attempt is made to load the parameters from the server certificate file. If this fails then a static set of parameters hard coded into this command will be used. Item "-nbio" Turns on non blocking I/O. Item "-timeout" Enable timeouts. Item "-mtu" Set link-layer \s-1MTU.\s0 Item "-psk_identity val" Expect the client to send \s-1PSK\s0 identity val when using a \s-1PSK\s0 cipher suite, and warn if they do not. By default, the expected \s-1PSK\s0 identity is the string \*(L"Client_identity\*(R". Item "-psk_hint val" Use the \s-1PSK\s0 identity hint val when using a \s-1PSK\s0 cipher suite. Item "-psk val" Use the \s-1PSK\s0 key val when using a \s-1PSK\s0 cipher suite. The key is given as a hexadecimal number without leading 0x, for example -psk 1a2b3c4d. This option must be provided in order to use a \s-1PSK\s0 cipher. Item "-psk_session file" Use the pem encoded \s-1SSL_SESSION\s0 data stored in file as the basis of a \s-1PSK.\s0 Note that this will only work if TLSv1.3 is negotiated. Item "-srpvfile" The verifier file for \s-1SRP.\s0 This option is deprecated. Item "-srpuserseed" A seed string for a default user salt. This option is deprecated. Item "-listen" This option can only be used in conjunction with one of the \s-1DTLS\s0 options above. With this option, this command will listen on a \s-1UDP\s0 port for incoming connections. Any ClientHellos that arrive will be checked to see if they have a cookie in them or not. Any without a cookie will be responded to with a HelloVerifyRequest. If a ClientHello with a cookie is received then this command will connect to that peer and complete the handshake. Item "-sctp" Use \s-1SCTP\s0 for the transport protocol instead of \s-1UDP\s0 in \s-1DTLS.\s0 Must be used in conjunction with -dtls, -dtls1 or -dtls1_2. This option is only available where OpenSSL has support for \s-1SCTP\s0 enabled. Item "-sctp_label_bug" Use the incorrect behaviour of older OpenSSL implementations when computing endpoint-pair shared secrets for \s-1DTLS/SCTP.\s0 This allows communication with older broken implementations but breaks interoperability with correct implementations. Must be used in conjunction with -sctp. This option is only available where OpenSSL has support for \s-1SCTP\s0 enabled. Item "-use_srtp" Offer \s-1SRTP\s0 key management with a colon-separated profile list. Item "-no_dhe" If this option is set then no \s-1DH\s0 parameters will be loaded effectively disabling the ephemeral \s-1DH\s0 cipher suites. Item "-alpn val, -nextprotoneg val" These flags enable the Application-Layer Protocol Negotiation or Next Protocol Negotiation (\s-1NPN\s0) extension, respectively. \s-1ALPN\s0 is the \s-1IETF\s0 standard and replaces \s-1NPN.\s0 The val list is a comma-separated list of supported protocol names. The list should contain the most desirable protocols first. Protocol names are printable \s-1ASCII\s0 strings, for example \*(L"http/1.1\*(R" or \*(L"spdy/3\*(R". The flag -nextprotoneg cannot be specified if -tls1_3 is used. Item "-sendfile" If this option is set and \s-1KTLS\s0 is enabled, SSL_sendfile() will be used instead of BIO_write() to send the \s-1HTTP\s0 response requested by a client. This option is only valid if -WWW or -HTTP is specified. Item "-keylogfile outfile" Appends \s-1TLS\s0 secrets to the specified keylog file such that external programs (like Wireshark) can decrypt \s-1TLS\s0 connections. Item "-max_early_data int" Change the default maximum early data bytes that are specified for new sessions and any incoming early data (when used in conjunction with the -early_data flag). The default value is approximately 16k. The argument must be an integer greater than or equal to 0. Item "-recv_max_early_data int" Specify the hard limit on the maximum number of early data bytes that will be accepted. Item "-early_data" Accept early data where possible. Cannot be used in conjunction with -www, \fB-WWW, -HTTP or -rev. Item "-stateless" Require TLSv1.3 cookies. Item "-anti_replay, -no_anti_replay" Switches replay protection on or off, respectively. Replay protection is on by default unless overridden by a configuration file. When it is on, OpenSSL will automatically detect if a session ticket has been used more than once, TLSv1.3 has been negotiated, and early data is enabled on the server. A full handshake is forced if a session ticket is used a second or subsequent time. Any early data that was sent will be rejected. Item "-nameopt option" This specifies how the subject or issuer names are displayed. See openssl-namedisplay-options\|(1) for details. Item "-no_ssl3, -no_tls1, -no_tls1_1, -no_tls1_2, -no_tls1_3, -ssl3, -tls1, -tls1_1, -tls1_2, -tls1_3" See \*(L"\s-1TLS\s0 Version Options\*(R" in openssl\|(1). Item "-dtls, -dtls1, -dtls1_2" These specify the use of \s-1DTLS\s0 instead of \s-1TLS.\s0 See \*(L"\s-1TLS\s0 Version Options\*(R" in openssl\|(1). Item "-bugs, -comp, -no_comp, -no_ticket, -serverpref, -client_renegotiation, -legacy_renegotiation, -no_renegotiation, -no_resumption_on_reneg, -legacy_server_connect, -no_legacy_server_connect, -no_etm -allow_no_dhe_kex, -prioritize_chacha, -strict, -sigalgs algs, -client_sigalgs algs, -groups groups, -curves curves, -named_curve curve, -cipher ciphers, -ciphersuites 1.3ciphers, -min_protocol minprot, -max_protocol maxprot, -record_padding padding, -debug_broken_protocol, -no_middlebox" See \*(L"\s-1SUPPORTED COMMAND LINE COMMANDS\*(R"\s0 in SSL_CONF_cmd\|(3) for details. Item "-xkey infile, -xcert file, -xchain file, -xchain_build file, -xcertform DER|PEM, -xkeyform DER|PEM" Set extended certificate verification options. See \*(L"Extended Verification Options\*(R" in openssl-verification-options\|(1) for details. Item "-CAfile file, -no-CAfile, -CApath dir, -no-CApath, -CAstore uri, -no-CAstore" See \*(L"Trusted Certificate Options\*(R" in openssl-verification-options\|(1) for details. Item "-rand files, -writerand file" See \*(L"Random State Options\*(R" in openssl\|(1) for details. Item "-engine id" See \*(L"Engine Options\*(R" in openssl\|(1). This option is deprecated. Item "-provider name"

0

Item "-provider-path path" Item "-propquery propq"

See \*(L"Provider Options\*(R" in openssl\|(1), provider\|(7), and property\|(7).

Item "-allow_proxy_certs, -attime, -no_check_time, -check_ss_sig, -crl_check, -crl_check_all, -explicit_policy, -extended_crl, -ignore_critical, -inhibit_any, -inhibit_map, -no_alt_chains, -partial_chain, -policy, -policy_check, -policy_print, -purpose, -suiteB_128, -suiteB_128_only, -suiteB_192, -trusted_first, -use_deltas, -auth_level, -verify_depth, -verify_email, -verify_hostname, -verify_ip, -verify_name, -x509_strict -issuer_checks" Set various options of certificate chain verification. See \*(L"Verification Options\*(R" in openssl-verification-options\|(1) for details. .Sp If the server requests a client certificate, then verification errors are displayed, for debugging, but the command will proceed unless the -verify_return_error option is used. Header "CONNECTED COMMANDS" If a connection request is established with an \s-1SSL\s0 client and neither the \fB-www nor the -WWW option has been used then normally any data received from the client is displayed and any key presses will be sent to the client.

Certain commands are also recognized which perform special operations. These commands are a letter which must appear at the start of a line. They are listed below.

Item "q" End the current \s-1SSL\s0 connection but still accept new connections. Item "Q" End the current \s-1SSL\s0 connection and exit. Item "r" Renegotiate the \s-1SSL\s0 session (TLSv1.2 and below only). Item "R" Renegotiate the \s-1SSL\s0 session and request a client certificate (TLSv1.2 and below only). Item "P" Send some plain text down the underlying \s-1TCP\s0 connection: this should cause the client to disconnect due to a protocol violation. Item "S" Print out some session cache status information. Item "k" Send a key update message to the client (TLSv1.3 only) Item "K" Send a key update message to the client and request one back (TLSv1.3 only) Item "c" Send a certificate request to the client (TLSv1.3 only) Header "NOTES" This command can be used to debug \s-1SSL\s0 clients. To accept connections from a web browser the command:

.Vb 1 openssl s_server -accept 443 -www .Ve

can be used for example.

Although specifying an empty list of CAs when requesting a client certificate is strictly speaking a protocol violation, some \s-1SSL\s0 clients interpret this to mean any \s-1CA\s0 is acceptable. This is useful for debugging purposes.

The session parameters can printed out using the openssl-sess_id\|(1) command.

Header "BUGS" Because this program has a lot of options and also because some of the techniques used are rather old, the C source for this command is rather hard to read and not a model of how things should be done. A typical \s-1SSL\s0 server program would be much simpler.

The output of common ciphers is wrong: it just gives the list of ciphers that OpenSSL recognizes and the client supports.

There should be a way for this command to print out details of any unknown cipher suites a client says it supports.

Header "SEE ALSO" \fBopenssl\|(1), \fBopenssl-sess_id\|(1), \fBopenssl-s_client\|(1), \fBopenssl-ciphers\|(1), \fBSSL_CONF_cmd\|(3), \fBSSL_CTX_set_max_send_fragment\|(3), \fBSSL_CTX_set_split_send_fragment\|(3), \fBSSL_CTX_set_max_pipelines\|(3), \fBossl_store-file\|(7) Header "HISTORY" The -no_alt_chains option was added in OpenSSL 1.1.0.

The \-allow-no-dhe-kex and -prioritize_chacha options were added in OpenSSL 1.1.1.

The -srpvfile, -srpuserseed, and -engine option were deprecated in OpenSSL 3.0.

Header "COPYRIGHT" Copyright 2000-2022 The OpenSSL Project Authors. All Rights Reserved.

Licensed under the Apache License 2.0 (the \*(L"License\*(R"). You may not use this file except in compliance with the License. You can obtain a copy in the file \s-1LICENSE\s0 in the source distribution or at <https://www.openssl.org/source/license.html>.