Automatically generated by Pod::Man 4.14 (Pod::Simple 3.40) Standard preamble: ========================================================================..
..
..
Set up some character translations and predefined strings. \*(-- will give an unbreakable dash, \*(PI will give pi, \*(L" will give a left double quote, and \*(R" will give a right double quote. \*(C+ will give a nicer C++. Capital omega is used to do unbreakable dashes and therefore won't be available. \*(C` and \*(C' expand to `' in nroff, nothing in troff, for use with C<>..tr \(*W-
. ds -- \(*W-
. ds PI pi
. if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch
. if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\" diablo 12 pitch
. ds L" ""
. ds R" ""
. ds C` ""
. ds C' ""
'br\}
. ds -- \|\(em\|
. ds PI \(*p
. ds L" ``
. ds R" ''
. ds C`
. ds C'
'br\}
Escape single quotes in literal strings from groff's Unicode transform. If the F register is >0, we'll generate index entries on stderr for titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index entries marked with X<> in POD. Of course, you'll have to process the output yourself in some meaningful fashion. Avoid warning from groff about undefined register 'F'...
.nr rF 0
. if \nF \{\
. de IX
. tm Index:\\$1\t\\n%\t"\\$2"
..
. if !\nF==2 \{\
. nr % 0
. nr F 2
. \}
. \}
.\}
.rr rF
Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). Fear. Run. Save yourself. No user-serviceable parts.. \" fudge factors for nroff and troff
. ds #H 0
. ds #V .8m
. ds #F .3m
. ds #[ \f1
. ds #]
.\}
. ds #H ((1u-(\\\\n(.fu%2u))*.13m)
. ds #V .6m
. ds #F 0
. ds #[ \&
. ds #] \&
.\}
. \" simple accents for nroff and troff
. ds ' \&
. ds ` \&
. ds ^ \&
. ds , \&
. ds ~ ~
. ds /
.\}
. ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u"
. ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u'
. ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u'
. ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u'
. ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u'
. ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u'
.\}
. \" troff and (daisy-wheel) nroff accents
. \" corrections for vroff
. \" for low resolution devices (crt and lpr)
\{\
. ds : e
. ds 8 ss
. ds o a
. ds d- d\h'-1'\(ga
. ds D- D\h'-1'\(hy
. ds th \o'bp'
. ds Th \o'LP'
. ds ae ae
. ds Ae AE
.\}
======================================================================== Title "OPENSSL-PKEY 1" OPENSSL-PKEY 1 "2023-06-02" "3.0.9" "OpenSSL"
For nroff, turn off justification. Always turn off hyphenation; it makes way too many mistakes in technical documents. "NAME"
openssl-pkey - public or private key processing command
"SYNOPSIS"
Header "SYNOPSIS" \fBopenssl
pkey
[
-help]
[
-engine id]
[
-provider name]
[
-provider-path path]
[
-propquery propq]
[
-check]
[
-pubcheck]
[
-in filename|
uri]
[
-inform \s-1DER\s0|
\s-1PEM\s0|
P12|
\s-1ENGINE\s0]
[
-passin arg]
[
-pubin]
[
-out filename]
[
-outform \s-1DER\s0|
\s-1PEM\s0]
[
-\f(BIcipher]
[-passout arg]
[-traditional]
[-pubout]
[-noout]
[-text]
[-text_pub]
[-ec_conv_form arg]
[-ec_param_enc arg]
"DESCRIPTION"
Header "DESCRIPTION" This command processes public or private keys. They can be
converted between various forms and their components printed.
"OPTIONS"
Header "OPTIONS" "General options"
Subsection "General options" "-help" 4
Item "-help" Print out a usage message.
"-engine id" 4
Item "-engine id" See \*(L"Engine Options\*(R" in
openssl\|(1).
This option is deprecated.
"-provider name" 4
Item "-provider name" 0
"-provider-path path" 4
Item "-provider-path path" "-propquery propq" 4
Item "-propquery propq"
See \*(L"Provider Options\*(R" in openssl\|(1), provider\|(7), and property\|(7).
"-check" 4
Item "-check" This option checks the consistency of a key pair for both public and private
components.
"-pubcheck" 4
Item "-pubcheck" This option checks the correctness of either a public key
or the public component of a key pair.
"Input options"
Subsection "Input options" "-in filename|uri" 4
Item "-in filename|uri" This specifies the input to read a key from
or standard input if this option is not specified.
If the key input is encrypted and
-passin is not given
a pass phrase will be prompted for.
"-inform \s-1DER\s0|\s-1PEM\s0|P12|\s-1ENGINE\s0" 4
Item "-inform DER|PEM|P12|ENGINE" The key input format; unspecified by default.
See
openssl-format-options\|(1) for details.
"-passin arg" 4
Item "-passin arg" The password source for the key input.
.Sp
For more information about the format of
arg
see
openssl-passphrase-options\|(1).
"-pubin" 4
Item "-pubin" By default a private key is read from the input.
With this option only the public components are read.
"Output options"
Subsection "Output options" "-out filename" 4
Item "-out filename" This specifies the output filename to save the encoded
and/
or text output of key
or standard output if this option is not specified.
If any cipher option is set but no
-passout is given
then a pass phrase will be prompted for.
The output filename should
not be the same as the input filename.
"-outform \s-1DER\s0|\s-1PEM\s0" 4
Item "-outform DER|PEM" The key output format; the default is
\s-1PEM\s0.
See
openssl-format-options\|(1) for details.
"-\f(BIcipher" 4
Item "-cipher" Encrypt the \s-1PEM\s0 encoded private key with the supplied cipher. Any algorithm
name accepted by
EVP_get_cipherbyname() is acceptable such as
aes128.
Encryption is not supported for \s-1DER\s0 output.
"-passout arg" 4
Item "-passout arg" The password source for the output file.
.Sp
For more information about the format of
arg
see
openssl-passphrase-options\|(1).
"-traditional" 4
Item "-traditional" Normally a private key is written using standard format: this is PKCS#8 form
with the appropriate encryption algorithm (if any). If the
-traditional
option is specified then the older \*(L"traditional\*(R" format is used instead.
"-pubout" 4
Item "-pubout" By default the private and public key is output;
this option restricts the output to the public components.
This option is automatically set if the input is a public key.
.Sp
When combined with
-text, this is equivalent to
-text_pub.
"-noout" 4
Item "-noout" Do not output the key in encoded form.
"-text" 4
Item "-text" Output the various key components in plain text
(possibly in addition to the \s-1PEM\s0 encoded form).
This cannot be combined with encoded output in \s-1DER\s0 format.
"-text_pub" 4
Item "-text_pub" Output in text form only the public key components (also for private keys).
This cannot be combined with encoded output in \s-1DER\s0 format.
"-ec_conv_form arg" 4
Item "-ec_conv_form arg" This option only applies to elliptic-curve based keys.
.Sp
This specifies how the points on the elliptic curve are converted
into octet strings. Possible values are:
compressed (the default
value),
uncompressed and
hybrid. For more information regarding
the point conversion forms please read the X9.62 standard.
\fBNote Due to patent issues the
compressed option is disabled
by default for binary curves and can be enabled by defining
the preprocessor macro
\s-1OPENSSL_EC_BIN_PT_COMP\s0 at compile time.
"-ec_param_enc arg" 4
Item "-ec_param_enc arg" This option only applies to elliptic curve based public and private keys.
.Sp
This specifies how the elliptic curve parameters are encoded.
Possible value are:
named_curve, i.e. the ec parameters are
specified by an \s-1OID,\s0 or
explicit where the ec parameters are
explicitly given (see \s-1RFC 3279\s0 for the definition of the
\s-1EC\s0 parameters structures). The default value is
named_curve.
\fBNote the
implicitlyCA alternative, as specified in \s-1RFC 3279,\s0
is currently not implemented in OpenSSL.
"EXAMPLES"
Header "EXAMPLES" To remove the pass phrase on a private key:
.Vb 1
openssl pkey -in key.pem -out keyout.pem
.Ve
To encrypt a private key using triple \s-1DES:\s0
.Vb 1
openssl pkey -in key.pem -des3 -out keyout.pem
.Ve
To convert a private key from \s-1PEM\s0 to \s-1DER\s0 format:
.Vb 1
openssl pkey -in key.pem -outform DER -out keyout.der
.Ve
To print out the components of a private key to standard output:
.Vb 1
openssl pkey -in key.pem -text -noout
.Ve
To print out the public components of a private key to standard output:
.Vb 1
openssl pkey -in key.pem -text_pub -noout
.Ve
To just output the public part of a private key:
.Vb 1
openssl pkey -in key.pem -pubout -out pubkey.pem
.Ve
To change the \s-1EC\s0 parameters encoding to explicit:
.Vb 1
openssl pkey -in key.pem -ec_param_enc explicit -out keyout.pem
.Ve
To change the \s-1EC\s0 point conversion form to compressed:
.Vb 1
openssl pkey -in key.pem -ec_conv_form compressed -out keyout.pem
.Ve
"SEE ALSO"
Header "SEE ALSO" \fBopenssl\|(1),
\fBopenssl-genpkey\|(1),
\fBopenssl-rsa\|(1),
\fBopenssl-pkcs8\|(1),
\fBopenssl-dsa\|(1),
\fBopenssl-genrsa\|(1),
\fBopenssl-gendsa\|(1)
"HISTORY"
Header "HISTORY" The
-engine option was deprecated in OpenSSL 3.0.
"COPYRIGHT"
Header "COPYRIGHT" Copyright 2006-2021 The OpenSSL Project Authors. All Rights Reserved.
Licensed under the Apache License 2.0 (the \*(L"License\*(R"). You may not use
this file except in compliance with the License. You can obtain a copy
in the file \s-1LICENSE\s0 in the source distribution or at
<https://www.openssl.org/source/license.html>.