Automatically generated by Pod::Man 4.11 (Pod::Simple 3.40)

Standard preamble:
========================================================================
..

..

.. Set up some character translations and predefined strings. \*(-- will
give an unbreakable dash, \*(PI will give pi, \*(L" will give a left
double quote, and \*(R" will give a right double quote. \*(C+ will
give a nicer C++. Capital omega is used to do unbreakable dashes and
therefore won't be available. \*(C` and \*(C' expand to `' in nroff,
nothing in troff, for use with C<>.
.tr \(*W- . ds -- \(*W- . ds PI pi . if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch . if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\" diablo 12 pitch . ds L" "" . ds R" "" . ds C` "" . ds C' "" 'br\} . ds -- \|\(em\| . ds PI \(*p . ds L" `` . ds R" '' . ds C` . ds C' 'br\}
Escape single quotes in literal strings from groff's Unicode transform.

If the F register is >0, we'll generate index entries on stderr for
titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index
entries marked with X<> in POD. Of course, you'll have to process the
output yourself in some meaningful fashion.

Avoid warning from groff about undefined register 'F'.
.. .nr rF 0 . if \nF \{\ . de IX . tm Index:\\$1\t\\n%\t"\\$2" .. . if !\nF==2 \{\ . nr % 0 . nr F 2 . \} . \} .\} .rr rF
Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2).
Fear. Run. Save yourself. No user-serviceable parts.
. \" fudge factors for nroff and troff . ds #H 0 . ds #V .8m . ds #F .3m . ds #[ \f1 . ds #] .\} . ds #H ((1u-(\\\\n(.fu%2u))*.13m) . ds #V .6m . ds #F 0 . ds #[ \& . ds #] \& .\} . \" simple accents for nroff and troff . ds ' \& . ds ` \& . ds ^ \& . ds , \& . ds ~ ~ . ds / .\} . ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u" . ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u' . ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u' . ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u' . ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u' . ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u' .\} . \" troff and (daisy-wheel) nroff accents . \" corrections for vroff . \" for low resolution devices (crt and lpr) \{\ . ds : e . ds 8 ss . ds o a . ds d- d\h'-1'\(ga . ds D- D\h'-1'\(hy . ds th \o'bp' . ds Th \o'LP' . ds ae ae . ds Ae AE .\} ========================================================================

Title "DES_MODES 7" For nroff, turn off justification. Always turn off hyphenation; it makes
way too many mistakes in technical documents.
des_modes - the variants of DES and other crypto algorithms of OpenSSL Header "DESCRIPTION" Several crypto algorithms for OpenSSL can be used in a number of modes. Those are used for using block ciphers in a way similar to stream ciphers, among other things. Header "OVERVIEW" Subsection "Electronic Codebook Mode (ECB)" Normally, this is found as the function algorithm_ecb_encrypt(). 64 bits are enciphered at a time. The order of the blocks can be rearranged without detection. The same plaintext block always produces the same ciphertext block (for the same key) making it vulnerable to a 'dictionary attack'. An error will only affect one ciphertext block. Subsection "Cipher Block Chaining Mode (CBC)" Normally, this is found as the function algorithm_cbc_encrypt(). Be aware that des_cbc_encrypt() is not really \s-1DES CBC\s0 (it does not update the \s-1IV\s0); use des_ncbc_encrypt() instead. a multiple of 64 bits are enciphered at a time. The \s-1CBC\s0 mode produces the same ciphertext whenever the same plaintext is encrypted using the same key and starting variable. The chaining operation makes the ciphertext blocks dependent on the current and all preceding plaintext blocks and therefore blocks can not be rearranged. The use of different starting variables prevents the same plaintext enciphering to the same ciphertext. An error will affect the current and the following ciphertext blocks. Subsection "Cipher Feedback Mode (CFB)" Normally, this is found as the function algorithm_cfb_encrypt(). a number of bits (j) <= 64 are enciphered at a time. The \s-1CFB\s0 mode produces the same ciphertext whenever the same plaintext is encrypted using the same key and starting variable. The chaining operation makes the ciphertext variables dependent on the current and all preceding variables and therefore j-bit variables are chained together and can not be rearranged. The use of different starting variables prevents the same plaintext enciphering to the same ciphertext. The strength of the \s-1CFB\s0 mode depends on the size of k (maximal if j == k). In my implementation this is always the case. Selection of a small value for j will require more cycles through the encipherment algorithm per unit of plaintext and thus cause greater processing overheads. Only multiples of j bits can be enciphered. An error will affect the current and the following ciphertext variables. Subsection "Output Feedback Mode (OFB)" Normally, this is found as the function algorithm_ofb_encrypt(). a number of bits (j) <= 64 are enciphered at a time. The \s-1OFB\s0 mode produces the same ciphertext whenever the same plaintext enciphered using the same key and starting variable. More over, in the \s-1OFB\s0 mode the same key stream is produced when the same key and start variable are used. Consequently, for security reasons a specific start variable should be used only once for a given key. The absence of chaining makes the \s-1OFB\s0 more vulnerable to specific attacks. The use of different start variables values prevents the same plaintext enciphering to the same ciphertext, by producing different key streams. Selection of a small value for j will require more cycles through the encipherment algorithm per unit of plaintext and thus cause greater processing overheads. Only multiples of j bits can be enciphered. \s-1OFB\s0 mode of operation does not extend ciphertext errors in the resultant plaintext output. Every bit error in the ciphertext causes only one bit to be in error in the deciphered plaintext. \s-1OFB\s0 mode is not self-synchronizing. If the two operation of encipherment and decipherment get out of synchronism, the system needs to be re-initialized. Each re-initialization should use a value of the start variable different from the start variable values used before with the same key. The reason for this is that an identical bit stream would be produced each time from the same parameters. This would be susceptible to a 'known plaintext' attack. Subsection "Triple ECB Mode" Normally, this is found as the function algorithm_ecb3_encrypt(). Encrypt with key1, decrypt with key2 and encrypt with key3 again. As for \s-1ECB\s0 encryption but increases the key length to 168 bits. There are theoretic attacks that can be used that make the effective key length 112 bits, but this attack also requires 2^56 blocks of memory, not very likely, even for the \s-1NSA.\s0 If both keys are the same it is equivalent to encrypting once with just one key. If the first and last key are the same, the key length is 112 bits. There are attacks that could reduce the effective key strength to only slightly more than 56 bits, but these require a lot of memory. If all 3 keys are the same, this is effectively the same as normal ecb mode. Subsection "Triple CBC Mode" Normally, this is found as the function algorithm_ede3_cbc_encrypt(). Encrypt with key1, decrypt with key2 and then encrypt with key3. As for \s-1CBC\s0 encryption but increases the key length to 168 bits with the same restrictions as for triple ecb mode. Header "NOTES" This text was been written in large parts by Eric Young in his original documentation for SSLeay, the predecessor of OpenSSL. In turn, he attributed it to:

.Vb 5 AS 2805.5.2 Australian Standard Electronic funds transfer - Requirements for interfaces, Part 5.2: Modes of operation for an n-bit block cipher algorithm Appendix A .Ve

Header "SEE ALSO" \fBBF_encrypt\|(3), DES_crypt\|(3) Header "COPYRIGHT" Copyright 2000-2017 The OpenSSL Project Authors. All Rights Reserved.

Licensed under the OpenSSL license (the \*(L"License\*(R"). You may not use this file except in compliance with the License. You can obtain a copy in the file \s-1LICENSE\s0 in the source distribution or at <https://www.openssl.org/source/license.html>.