Automatically generated by Pod::Man 4.14 (Pod::Simple 3.41)

Standard preamble:
========================================================================
..

..

.. Set up some character translations and predefined strings. \*(-- will
give an unbreakable dash, \*(PI will give pi, \*(L" will give a left
double quote, and \*(R" will give a right double quote. \*(C+ will
give a nicer C++. Capital omega is used to do unbreakable dashes and
therefore won't be available. \*(C` and \*(C' expand to `' in nroff,
nothing in troff, for use with C<>.
.tr \(*W- . ds -- \(*W- . ds PI pi . if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch . if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\" diablo 12 pitch . ds L" "" . ds R" "" . ds C` "" . ds C' "" 'br\} . ds -- \|\(em\| . ds PI \(*p . ds L" `` . ds R" '' . ds C` . ds C' 'br\}
Escape single quotes in literal strings from groff's Unicode transform.

If the F register is >0, we'll generate index entries on stderr for
titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index
entries marked with X<> in POD. Of course, you'll have to process the
output yourself in some meaningful fashion.

Avoid warning from groff about undefined register 'F'.
.. .nr rF 0 . if \nF \{\ . de IX . tm Index:\\$1\t\\n%\t"\\$2" .. . if !\nF==2 \{\ . nr % 0 . nr F 2 . \} . \} .\} .rr rF
Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2).
Fear. Run. Save yourself. No user-serviceable parts.
. \" fudge factors for nroff and troff . ds #H 0 . ds #V .8m . ds #F .3m . ds #[ \f1 . ds #] .\} . ds #H ((1u-(\\\\n(.fu%2u))*.13m) . ds #V .6m . ds #F 0 . ds #[ \& . ds #] \& .\} . \" simple accents for nroff and troff . ds ' \& . ds ` \& . ds ^ \& . ds , \& . ds ~ ~ . ds / .\} . ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u" . ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u' . ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u' . ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u' . ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u' . ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u' .\} . \" troff and (daisy-wheel) nroff accents . \" corrections for vroff . \" for low resolution devices (crt and lpr) \{\ . ds : e . ds 8 ss . ds o a . ds d- d\h'-1'\(ga . ds D- D\h'-1'\(hy . ds th \o'bp' . ds Th \o'LP' . ds ae ae . ds Ae AE .\} ========================================================================

Title "X509_CHECK_HOST 3" For nroff, turn off justification. Always turn off hyphenation; it makes
way too many mistakes in technical documents.
X509_check_host, X509_check_email, X509_check_ip, X509_check_ip_asc - X.509 certificate matching Header "SYNOPSIS" .Vb 1 #include <openssl/x509v3.h> \& int X509_check_host(X509 *, const char *name, size_t namelen, unsigned int flags, char **peername); int X509_check_email(X509 *, const char *address, size_t addresslen, unsigned int flags); int X509_check_ip(X509 *, const unsigned char *address, size_t addresslen, unsigned int flags); int X509_check_ip_asc(X509 *, const char *address, unsigned int flags); .Ve Header "DESCRIPTION" The certificate matching functions are used to check whether a certificate matches a given hostname, email address, or \s-1IP\s0 address. The validity of the certificate and its trust level has to be checked by other means.

\fBX509_check_host() checks if the certificate Subject Alternative Name (\s-1SAN\s0) or Subject CommonName (\s-1CN\s0) matches the specified hostname, which must be encoded in the preferred name syntax described in section 3.5 of \s-1RFC 1034.\s0 By default, wildcards are supported and they match only in the left-most label; but they may match part of that label with an explicit prefix or suffix. For example, by default, the host name \*(L"www.example.com\*(R" would match a certificate with a \s-1SAN\s0 or \s-1CN\s0 value of \*(L"*.example.com\*(R", \*(L"w*.example.com\*(R" or \*(L"*w.example.com\*(R".

Per section 6.4.2 of \s-1RFC 6125,\s0 name values representing international domain names must be given in A-label form. The namelen argument must be the number of characters in the name string or zero in which case the length is calculated with strlen(name). When name starts with a dot (e.g. \*(L".example.com\*(R"), it will be matched by a certificate valid for any sub-domain of name, (see also \fBX509_CHECK_FLAG_SINGLE_LABEL_SUBDOMAINS below).

When the certificate is matched, and peername is not \s-1NULL,\s0 a pointer to a copy of the matching \s-1SAN\s0 or \s-1CN\s0 from the peer certificate is stored at the address passed in peername. The application is responsible for freeing the peername via OPENSSL_free() when it is no longer needed.

\fBX509_check_email() checks if the certificate matches the specified email address. Only the mailbox syntax of \s-1RFC 822\s0 is supported, comments are not allowed, and no attempt is made to normalize quoted characters. The addresslen argument must be the number of characters in the address string or zero in which case the length is calculated with strlen(address).

\fBX509_check_ip() checks if the certificate matches a specified IPv4 or IPv6 address. The address array is in binary format, in network byte order. The length is either 4 (IPv4) or 16 (IPv6). Only explicitly marked addresses in the certificates are considered; \s-1IP\s0 addresses stored in \s-1DNS\s0 names and Common Names are ignored.

\fBX509_check_ip_asc() is similar, except that the NUL-terminated string address is first converted to the internal representation.

The flags argument is usually 0. It can be the bitwise \s-1OR\s0 of the flags:

Item "X509_CHECK_FLAG_ALWAYS_CHECK_SUBJECT,"

0

Item "X509_CHECK_FLAG_NEVER_CHECK_SUBJECT," Item "X509_CHECK_FLAG_NO_WILDCARDS," Item "X509_CHECK_FLAG_NO_PARTIAL_WILDCARDS," Item "X509_CHECK_FLAG_MULTI_LABEL_WILDCARDS." Item "X509_CHECK_FLAG_SINGLE_LABEL_SUBDOMAINS."

The X509_CHECK_FLAG_ALWAYS_CHECK_SUBJECT flag causes the function to consider the subject \s-1DN\s0 even if the certificate contains at least one subject alternative name of the right type (\s-1DNS\s0 name or email address as appropriate); the default is to ignore the subject \s-1DN\s0 when at least one corresponding subject alternative names is present.

The X509_CHECK_FLAG_NEVER_CHECK_SUBJECT flag causes the function to never consider the subject \s-1DN\s0 even if the certificate contains no subject alternative names of the right type (\s-1DNS\s0 name or email address as appropriate); the default is to use the subject \s-1DN\s0 when no corresponding subject alternative names are present. If both X509_CHECK_FLAG_ALWAYS_CHECK_SUBJECT and \fBX509_CHECK_FLAG_NEVER_CHECK_SUBJECT are specified, the latter takes precedence and the subject \s-1DN\s0 is not checked for matching names.

If set, X509_CHECK_FLAG_NO_WILDCARDS disables wildcard expansion; this only applies to X509_check_host.

If set, X509_CHECK_FLAG_NO_PARTIAL_WILDCARDS suppresses support for \*(L"*\*(R" as wildcard pattern in labels that have a prefix or suffix, such as: \*(L"www*\*(R" or \*(L"*www\*(R"; this only applies to X509_check_host.

If set, X509_CHECK_FLAG_MULTI_LABEL_WILDCARDS allows a \*(L"*\*(R" that constitutes the complete label of a \s-1DNS\s0 name (e.g. \*(L"*.example.com\*(R") to match more than one label in name; this flag only applies to X509_check_host.

If set, X509_CHECK_FLAG_SINGLE_LABEL_SUBDOMAINS restricts name values which start with \*(L".\*(R", that would otherwise match any sub-domain in the peer certificate, to only match direct child sub-domains. Thus, for instance, with this flag set a name of \*(L".example.com\*(R" would match a peer certificate with a \s-1DNS\s0 name of \*(L"www.example.com\*(R", but would not match a peer certificate with a \s-1DNS\s0 name of \*(L"www.sub.example.com\*(R"; this flag only applies to X509_check_host.

Header "RETURN VALUES" The functions return 1 for a successful match, 0 for a failed match and -1 for an internal error: typically a memory allocation failure or an \s-1ASN.1\s0 decoding error.

All functions can also return -2 if the input is malformed. For example, \fBX509_check_host() returns -2 if the provided name contains embedded NULs.

Header "NOTES" Applications are encouraged to use X509_VERIFY_PARAM_set1_host() rather than explicitly calling X509_check_host\|(3). Host name checks may be out of scope with the \s-1DANE-EE\s0\|(3) certificate usage, and the internal checks will be suppressed as appropriate when \s-1DANE\s0 support is enabled. Header "SEE ALSO" \fBSSL_get_verify_result\|(3), \fBX509_VERIFY_PARAM_set1_host\|(3), \fBX509_VERIFY_PARAM_add1_host\|(3), \fBX509_VERIFY_PARAM_set1_email\|(3), \fBX509_VERIFY_PARAM_set1_ip\|(3), \fBX509_VERIFY_PARAM_set1_ipasc\|(3) Header "HISTORY" These functions were added in OpenSSL 1.0.2. Header "COPYRIGHT" Copyright 2012-2020 The OpenSSL Project Authors. All Rights Reserved.

Licensed under the OpenSSL license (the \*(L"License\*(R"). You may not use this file except in compliance with the License. You can obtain a copy in the file \s-1LICENSE\s0 in the source distribution or at <https://www.openssl.org/source/license.html>.