Automatically generated by Pod::Man 4.14 (Pod::Simple 3.40)

Standard preamble:
========================================================================
..

..

.. Set up some character translations and predefined strings. \*(-- will
give an unbreakable dash, \*(PI will give pi, \*(L" will give a left
double quote, and \*(R" will give a right double quote. \*(C+ will
give a nicer C++. Capital omega is used to do unbreakable dashes and
therefore won't be available. \*(C` and \*(C' expand to `' in nroff,
nothing in troff, for use with C<>.
.tr \(*W- . ds -- \(*W- . ds PI pi . if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch . if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\" diablo 12 pitch . ds L" "" . ds R" "" . ds C` "" . ds C' "" 'br\} . ds -- \|\(em\| . ds PI \(*p . ds L" `` . ds R" '' . ds C` . ds C' 'br\}
Escape single quotes in literal strings from groff's Unicode transform.

If the F register is >0, we'll generate index entries on stderr for
titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index
entries marked with X<> in POD. Of course, you'll have to process the
output yourself in some meaningful fashion.

Avoid warning from groff about undefined register 'F'.
.. .nr rF 0 . if \nF \{\ . de IX . tm Index:\\$1\t\\n%\t"\\$2" .. . if !\nF==2 \{\ . nr % 0 . nr F 2 . \} . \} .\} .rr rF
Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2).
Fear. Run. Save yourself. No user-serviceable parts.
. \" fudge factors for nroff and troff . ds #H 0 . ds #V .8m . ds #F .3m . ds #[ \f1 . ds #] .\} . ds #H ((1u-(\\\\n(.fu%2u))*.13m) . ds #V .6m . ds #F 0 . ds #[ \& . ds #] \& .\} . \" simple accents for nroff and troff . ds ' \& . ds ` \& . ds ^ \& . ds , \& . ds ~ ~ . ds / .\} . ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u" . ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u' . ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u' . ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u' . ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u' . ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u' .\} . \" troff and (daisy-wheel) nroff accents . \" corrections for vroff . \" for low resolution devices (crt and lpr) \{\ . ds : e . ds 8 ss . ds o a . ds d- d\h'-1'\(ga . ds D- D\h'-1'\(hy . ds th \o'bp' . ds Th \o'LP' . ds ae ae . ds Ae AE .\} ========================================================================

Title "SSL_READ 3" For nroff, turn off justification. Always turn off hyphenation; it makes
way too many mistakes in technical documents.
SSL_read_ex, SSL_read, SSL_peek_ex, SSL_peek \- read bytes from a TLS/SSL connection Header "SYNOPSIS" .Vb 1 #include <openssl/ssl.h> \& int SSL_read_ex(SSL *ssl, void *buf, size_t num, size_t *readbytes); int SSL_read(SSL *ssl, void *buf, int num); \& int SSL_peek_ex(SSL *ssl, void *buf, size_t num, size_t *readbytes); int SSL_peek(SSL *ssl, void *buf, int num); .Ve Header "DESCRIPTION" \fBSSL_read_ex() and SSL_read() try to read num bytes from the specified ssl into the buffer buf. On success SSL_read_ex() will store the number of bytes actually read in *readbytes.

\fBSSL_peek_ex() and SSL_peek() are identical to SSL_read_ex() and SSL_read() respectively except no bytes are actually removed from the underlying \s-1BIO\s0 during the read, so that a subsequent call to SSL_read_ex() or SSL_read() will yield at least the same bytes.

Header "NOTES" In the paragraphs below a \*(L"read function\*(R" is defined as one of SSL_read_ex(), \fBSSL_read(), SSL_peek_ex() or SSL_peek().

If necessary, a read function will negotiate a \s-1TLS/SSL\s0 session, if not already explicitly performed by SSL_connect\|(3) or SSL_accept\|(3). If the peer requests a re-negotiation, it will be performed transparently during the read function operation. The behaviour of the read functions depends on the underlying \s-1BIO.\s0

For the transparent negotiation to succeed, the ssl must have been initialized to client or server mode. This is being done by calling \fBSSL_set_connect_state\|(3) or SSL_set_accept_state() before the first invocation of a read function.

The read functions work based on the \s-1SSL/TLS\s0 records. The data are received in records (with a maximum record size of 16kB). Only when a record has been completely received, can it be processed (decryption and check of integrity). Therefore, data that was not retrieved at the last read call can still be buffered inside the \s-1SSL\s0 layer and will be retrieved on the next read call. If num is higher than the number of bytes buffered then the read functions will return with the bytes buffered. If no more bytes are in the buffer, the read functions will trigger the processing of the next record. Only when the record has been received and processed completely will the read functions return reporting success. At most the contents of one record will be returned. As the size of an \s-1SSL/TLS\s0 record may exceed the maximum packet size of the underlying transport (e.g. \s-1TCP\s0), it may be necessary to read several packets from the transport layer before the record is complete and the read call can succeed.

If \s-1SSL_MODE_AUTO_RETRY\s0 has been switched off and a non-application data record has been processed, the read function can return and set the error to \fB\s-1SSL_ERROR_WANT_READ\s0. In this case there might still be unprocessed data available in the \s-1BIO\s0. If read ahead was set using SSL_CTX_set_read_ahead\|(3), there might also still be unprocessed data available in the \s-1SSL\s0. This behaviour can be controlled using the SSL_CTX_set_mode\|(3) call.

If the underlying \s-1BIO\s0 is blocking, a read function will only return once the read operation has been finished or an error occurred, except when a non-application data record has been processed and \s-1SSL_MODE_AUTO_RETRY\s0 is not set. Note that if \s-1SSL_MODE_AUTO_RETRY\s0 is set and only non-application data is available the call will hang.

If the underlying \s-1BIO\s0 is nonblocking, a read function will also return when the underlying \s-1BIO\s0 could not satisfy the needs of the function to continue the operation. In this case a call to SSL_get_error\|(3) with the return value of the read function will yield \s-1SSL_ERROR_WANT_READ\s0 or \fB\s-1SSL_ERROR_WANT_WRITE\s0. As at any time it's possible that non-application data needs to be sent, a read function can also cause write operations. The calling process then must repeat the call after taking appropriate action to satisfy the needs of the read function. The action depends on the underlying \s-1BIO.\s0 When using a nonblocking socket, nothing is to be done, but select() can be used to check for the required condition. When using a buffering \s-1BIO,\s0 like a \s-1BIO\s0 pair, data must be written into or retrieved out of the \s-1BIO\s0 before being able to continue.

\fBSSL_pending\|(3) can be used to find out whether there are buffered bytes available for immediate retrieval. In this case the read function can be called without blocking or actually receiving new data from the underlying socket.

Header "RETURN VALUES" \fBSSL_read_ex() and SSL_peek_ex() will return 1 for success or 0 for failure. Success means that 1 or more application data bytes have been read from the \s-1SSL\s0 connection. Failure means that no bytes could be read from the \s-1SSL\s0 connection. Failures can be retryable (e.g. we are waiting for more bytes to be delivered by the network) or non-retryable (e.g. a fatal network error). In the event of a failure call SSL_get_error\|(3) to find out the reason which indicates whether the call is retryable or not.

For SSL_read() and SSL_peek() the following return values can occur:

Item "> 0" The read operation was successful. The return value is the number of bytes actually read from the \s-1TLS/SSL\s0 connection. Item "<= 0" The read operation was not successful, because either the connection was closed, an error occurred or action must be taken by the calling process. Call SSL_get_error\|(3) with the return value ret to find out the reason. .Sp Old documentation indicated a difference between 0 and -1, and that -1 was retryable. You should instead call SSL_get_error() to find out if it's retryable. Header "SEE ALSO" \fBSSL_get_error\|(3), SSL_write_ex\|(3), \fBSSL_CTX_set_mode\|(3), SSL_CTX_new\|(3), \fBSSL_connect\|(3), SSL_accept\|(3) \fBSSL_set_connect_state\|(3), \fBSSL_pending\|(3), \fBSSL_shutdown\|(3), SSL_set_shutdown\|(3), \fBssl\|(7), bio\|(7) Header "HISTORY" The SSL_read_ex() and SSL_peek_ex() functions were added in OpenSSL 1.1.1. Header "COPYRIGHT" Copyright 2000-2020 The OpenSSL Project Authors. All Rights Reserved.

Licensed under the Apache License 2.0 (the \*(L"License\*(R"). You may not use this file except in compliance with the License. You can obtain a copy in the file \s-1LICENSE\s0 in the source distribution or at <https://www.openssl.org/source/license.html>.