Automatically generated by Pod::Man 4.14 (Pod::Simple 3.42)

Standard preamble:
========================================================================
..

..

.. Set up some character translations and predefined strings. \*(-- will
give an unbreakable dash, \*(PI will give pi, \*(L" will give a left
double quote, and \*(R" will give a right double quote. \*(C+ will
give a nicer C++. Capital omega is used to do unbreakable dashes and
therefore won't be available. \*(C` and \*(C' expand to `' in nroff,
nothing in troff, for use with C<>.
.tr \(*W- . ds -- \(*W- . ds PI pi . if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch . if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\" diablo 12 pitch . ds L" "" . ds R" "" . ds C` "" . ds C' "" 'br\} . ds -- \|\(em\| . ds PI \(*p . ds L" `` . ds R" '' . ds C` . ds C' 'br\}
Escape single quotes in literal strings from groff's Unicode transform.

If the F register is >0, we'll generate index entries on stderr for
titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index
entries marked with X<> in POD. Of course, you'll have to process the
output yourself in some meaningful fashion.

Avoid warning from groff about undefined register 'F'.
.. .nr rF 0 . if \nF \{\ . de IX . tm Index:\\$1\t\\n%\t"\\$2" .. . if !\nF==2 \{\ . nr % 0 . nr F 2 . \} . \} .\} .rr rF Fear. Run. Save yourself. No user-serviceable parts.
. \" fudge factors for nroff and troff . ds #H 0 . ds #V .8m . ds #F .3m . ds #[ \f1 . ds #] .\} . ds #H ((1u-(\\\\n(.fu%2u))*.13m) . ds #V .6m . ds #F 0 . ds #[ \& . ds #] \& .\} . \" simple accents for nroff and troff . ds ' \& . ds ` \& . ds ^ \& . ds , \& . ds ~ ~ . ds / .\} . ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u" . ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u' . ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u' . ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u' . ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u' . ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u' .\} . \" troff and (daisy-wheel) nroff accents . \" corrections for vroff . \" for low resolution devices (crt and lpr) \{\ . ds : e . ds 8 ss . ds o a . ds d- d\h'-1'\(ga . ds D- D\h'-1'\(hy . ds th \o'bp' . ds Th \o'LP' . ds ae ae . ds Ae AE .\} ========================================================================

Title "SSL_GET_ERROR 3ossl" For nroff, turn off justification. Always turn off hyphenation; it makes
way too many mistakes in technical documents.
SSL_get_error - obtain result code for TLS/SSL I/O operation Header "SYNOPSIS" .Vb 1 #include <openssl/ssl.h> \& int SSL_get_error(const SSL *ssl, int ret); .Ve Header "DESCRIPTION" \fBSSL_get_error() returns a result code (suitable for the C \*(L"switch\*(R" statement) for a preceding call to SSL_connect(), SSL_accept(), SSL_do_handshake(), \fBSSL_read_ex(), SSL_read(), SSL_peek_ex(), SSL_peek(), SSL_shutdown(), \fBSSL_write_ex() or SSL_write() on ssl. The value returned by that \s-1TLS/SSL I/O\s0 function must be passed to SSL_get_error() in parameter ret.

In addition to ssl and ret, SSL_get_error() inspects the current thread's OpenSSL error queue. Thus, SSL_get_error() must be used in the same thread that performed the \s-1TLS/SSL I/O\s0 operation, and no other OpenSSL function calls should appear in between. The current thread's error queue must be empty before the \s-1TLS/SSL I/O\s0 operation is attempted, or SSL_get_error() will not work reliably.

Header "NOTES" Some \s-1TLS\s0 implementations do not send a close_notify alert on shutdown.

On an unexpected \s-1EOF,\s0 versions before OpenSSL 3.0 returned \fB\s-1SSL_ERROR_SYSCALL\s0, nothing was added to the error stack, and errno was 0. Since OpenSSL 3.0 the returned error is \s-1SSL_ERROR_SSL\s0 with a meaningful error on the error stack.

Header "RETURN VALUES" The following return values can currently occur: Item "SSL_ERROR_NONE" The \s-1TLS/SSL I/O\s0 operation completed. This result code is returned if and only if ret > 0. Item "SSL_ERROR_ZERO_RETURN" The \s-1TLS/SSL\s0 peer has closed the connection for writing by sending the close_notify alert. No more data can be read. Note that \s-1SSL_ERROR_ZERO_RETURN\s0 does not necessarily indicate that the underlying transport has been closed. .Sp This error can also appear when the option \s-1SSL_OP_IGNORE_UNEXPECTED_EOF\s0 is set. See SSL_CTX_set_options\|(3) for more details. Item "SSL_ERROR_WANT_READ, SSL_ERROR_WANT_WRITE" The operation did not complete and can be retried later. .Sp \fB\s-1SSL_ERROR_WANT_READ\s0 is returned when the last operation was a read operation from a nonblocking \s-1BIO\s0. It means that not enough data was available at this time to complete the operation. If at a later time the underlying \s-1BIO\s0 has data available for reading the same function can be called again. .Sp \fBSSL_read() and SSL_read_ex() can also set \s-1SSL_ERROR_WANT_READ\s0 when there is still unprocessed data available at either the \s-1SSL\s0 or the \s-1BIO\s0 layer, even for a blocking \s-1BIO\s0. See SSL_read\|(3) for more information. .Sp \fB\s-1SSL_ERROR_WANT_WRITE\s0 is returned when the last operation was a write to a nonblocking \s-1BIO\s0 and it was unable to sent all data to the \s-1BIO\s0. When the \s-1BIO\s0 is writable again, the same function can be called again. .Sp Note that the retry may again lead to an \s-1SSL_ERROR_WANT_READ\s0 or \fB\s-1SSL_ERROR_WANT_WRITE\s0 condition. There is no fixed upper limit for the number of iterations that may be necessary until progress becomes visible at application protocol level. .Sp It is safe to call SSL_read() or SSL_read_ex() when more data is available even when the call that set this error was an SSL_write() or SSL_write_ex(). However, if the call was an SSL_write() or SSL_write_ex(), it should be called again to continue sending the application data. If you get \s-1SSL_ERROR_WANT_WRITE\s0 from SSL_write() or SSL_write_ex() then you should not do any other operation that could trigger \s-1IO\s0 other than to repeat the previous SSL_write() call. .Sp For socket \s-1BIO\s0s (e.g. when SSL_set_fd() was used), select() or \fBpoll() on the underlying socket can be used to find out when the \s-1TLS/SSL I/O\s0 function should be retried. .Sp Caveat: Any \s-1TLS/SSL I/O\s0 function can lead to either of \fB\s-1SSL_ERROR_WANT_READ\s0 and \s-1SSL_ERROR_WANT_WRITE\s0. In particular, \fBSSL_read_ex(), SSL_read(), SSL_peek_ex(), or SSL_peek() may want to write data and SSL_write() or SSL_write_ex() may want to read data. This is mainly because \s-1TLS/SSL\s0 handshakes may occur at any time during the protocol (initiated by either the client or the server); SSL_read_ex(), SSL_read(), SSL_peek_ex(), \fBSSL_peek(), SSL_write_ex(), and SSL_write() will handle any pending handshakes. Item "SSL_ERROR_WANT_CONNECT, SSL_ERROR_WANT_ACCEPT" The operation did not complete; the same \s-1TLS/SSL I/O\s0 function should be called again later. The underlying \s-1BIO\s0 was not connected yet to the peer and the call would block in connect()/accept(). The \s-1SSL\s0 function should be called again when the connection is established. These messages can only appear with a BIO_s_connect() or BIO_s_accept() \s-1BIO,\s0 respectively. In order to find out, when the connection has been successfully established, on many platforms select() or poll() for writing on the socket file descriptor can be used. Item "SSL_ERROR_WANT_X509_LOOKUP" The operation did not complete because an application callback set by \fBSSL_CTX_set_client_cert_cb() has asked to be called again. The \s-1TLS/SSL I/O\s0 function should be called again later. Details depend on the application. Item "SSL_ERROR_WANT_ASYNC" The operation did not complete because an asynchronous engine is still processing data. This will only occur if the mode has been set to \s-1SSL_MODE_ASYNC\s0 using SSL_CTX_set_mode\|(3) or SSL_set_mode\|(3) and an asynchronous capable engine is being used. An application can determine whether the engine has completed its processing using select() or poll() on the asynchronous wait file descriptor. This file descriptor is available by calling \fBSSL_get_all_async_fds\|(3) or SSL_get_changed_async_fds\|(3). The \s-1TLS/SSL I/O\s0 function should be called again later. The function must be called from the same thread that the original call was made from. Item "SSL_ERROR_WANT_ASYNC_JOB" The asynchronous job could not be started because there were no async jobs available in the pool (see ASYNC_init_thread\|(3)). This will only occur if the mode has been set to \s-1SSL_MODE_ASYNC\s0 using SSL_CTX_set_mode\|(3) or \fBSSL_set_mode\|(3) and a maximum limit has been set on the async job pool through a call to ASYNC_init_thread\|(3). The application should retry the operation after a currently executing asynchronous operation for the current thread has completed. Item "SSL_ERROR_WANT_CLIENT_HELLO_CB" The operation did not complete because an application callback set by \fBSSL_CTX_set_client_hello_cb() has asked to be called again. The \s-1TLS/SSL I/O\s0 function should be called again later. Details depend on the application. Item "SSL_ERROR_SYSCALL" Some non-recoverable, fatal I/O error occurred. The OpenSSL error queue may contain more information on the error. For socket I/O on Unix systems, consult \fBerrno for details. If this error occurs then no further I/O operations should be performed on the connection and SSL_shutdown() must not be called. .Sp This value can also be returned for other errors, check the error queue for details. Item "SSL_ERROR_SSL" A non-recoverable, fatal error in the \s-1SSL\s0 library occurred, usually a protocol error. The OpenSSL error queue contains more information on the error. If this error occurs then no further I/O operations should be performed on the connection and SSL_shutdown() must not be called. Header "SEE ALSO" \fBssl\|(7) Header "HISTORY" The \s-1SSL_ERROR_WANT_ASYNC\s0 error code was added in OpenSSL 1.1.0. The \s-1SSL_ERROR_WANT_CLIENT_HELLO_CB\s0 error code was added in OpenSSL 1.1.1. Header "COPYRIGHT" Copyright 2000-2021 The OpenSSL Project Authors. All Rights Reserved.

Licensed under the Apache License 2.0 (the \*(L"License\*(R"). You may not use this file except in compliance with the License. You can obtain a copy in the file \s-1LICENSE\s0 in the source distribution or at <https://www.openssl.org/source/license.html>.