Automatically generated by Pod::Man 4.11 (Pod::Simple 3.40)
Standard preamble:
========================================================================
..
give an unbreakable dash, \*(PI will give pi, \*(L" will give a left
double quote, and \*(R" will give a right double quote. \*(C+ will
give a nicer C++. Capital omega is used to do unbreakable dashes and
therefore won't be available. \*(C` and \*(C' expand to `' in nroff,
nothing in troff, for use with C<>.
.tr \(*W- . ds -- \(*W- . ds PI pi . if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch . if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\" diablo 12 pitch . ds L" "" . ds R" "" . ds C` "" . ds C' "" 'br\} . ds -- \|\(em\| . ds PI \(*p . ds L" `` . ds R" '' . ds C` . ds C' 'br\}
Escape single quotes in literal strings from groff's Unicode transform.
If the F register is >0, we'll generate index entries on stderr for
titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index
entries marked with X<> in POD. Of course, you'll have to process the
output yourself in some meaningful fashion.
Avoid warning from groff about undefined register 'F'.
.. .nr rF 0 . if \nF \{\ . de IX . tm Index:\\$1\t\\n%\t"\\$2" .. . if !\nF==2 \{\ . nr % 0 . nr F 2 . \} . \} .\} .rr rF
Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2).
Fear. Run. Save yourself. No user-serviceable parts.
. \" fudge factors for nroff and troff . ds #H 0 . ds #V .8m . ds #F .3m . ds #[ \f1 . ds #] .\} . ds #H ((1u-(\\\\n(.fu%2u))*.13m) . ds #V .6m . ds #F 0 . ds #[ \& . ds #] \& .\} . \" simple accents for nroff and troff . ds ' \& . ds ` \& . ds ^ \& . ds , \& . ds ~ ~ . ds / .\} . ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u" . ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u' . ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u' . ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u' . ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u' . ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u' .\} . \" troff and (daisy-wheel) nroff accents . \" corrections for vroff . \" for low resolution devices (crt and lpr) \{\ . ds : e . ds 8 ss . ds o a . ds d- d\h'-1'\(ga . ds D- D\h'-1'\(hy . ds th \o'bp' . ds Th \o'LP' . ds ae ae . ds Ae AE .\} ========================================================================
Title "SSL_CTX_SET_MODE 3"
way too many mistakes in technical documents.
Standard preamble:
========================================================================
..
.... Set up some character translations and predefined strings. \*(-- will
give an unbreakable dash, \*(PI will give pi, \*(L" will give a left
double quote, and \*(R" will give a right double quote. \*(C+ will
give a nicer C++. Capital omega is used to do unbreakable dashes and
therefore won't be available. \*(C` and \*(C' expand to `' in nroff,
nothing in troff, for use with C<>.
.tr \(*W- . ds -- \(*W- . ds PI pi . if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch . if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\" diablo 12 pitch . ds L" "" . ds R" "" . ds C` "" . ds C' "" 'br\} . ds -- \|\(em\| . ds PI \(*p . ds L" `` . ds R" '' . ds C` . ds C' 'br\}
Escape single quotes in literal strings from groff's Unicode transform.
If the F register is >0, we'll generate index entries on stderr for
titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index
entries marked with X<> in POD. Of course, you'll have to process the
output yourself in some meaningful fashion.
Avoid warning from groff about undefined register 'F'.
.. .nr rF 0 . if \nF \{\ . de IX . tm Index:\\$1\t\\n%\t"\\$2" .. . if !\nF==2 \{\ . nr % 0 . nr F 2 . \} . \} .\} .rr rF
Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2).
Fear. Run. Save yourself. No user-serviceable parts.
. \" fudge factors for nroff and troff . ds #H 0 . ds #V .8m . ds #F .3m . ds #[ \f1 . ds #] .\} . ds #H ((1u-(\\\\n(.fu%2u))*.13m) . ds #V .6m . ds #F 0 . ds #[ \& . ds #] \& .\} . \" simple accents for nroff and troff . ds ' \& . ds ` \& . ds ^ \& . ds , \& . ds ~ ~ . ds / .\} . ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u" . ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u' . ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u' . ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u' . ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u' . ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u' .\} . \" troff and (daisy-wheel) nroff accents . \" corrections for vroff . \" for low resolution devices (crt and lpr) \{\ . ds : e . ds 8 ss . ds o a . ds d- d\h'-1'\(ga . ds D- D\h'-1'\(hy . ds th \o'bp' . ds Th \o'LP' . ds ae ae . ds Ae AE .\} ========================================================================
Title "SSL_CTX_SET_MODE 3"
SSL_CTX_SET_MODE 3 "2020-03-31" "1.1.1f" "OpenSSL"
For nroff, turn off justification. Always turn off hyphenation; it makesway too many mistakes in technical documents.
"NAME"
SSL_CTX_set_mode, SSL_CTX_clear_mode, SSL_set_mode, SSL_clear_mode, SSL_CTX_get_mode, SSL_get_mode - manipulate SSL engine mode
"SYNOPSIS"
Header "SYNOPSIS" .Vb 1
#include <openssl/ssl.h>
\&
long SSL_CTX_set_mode(SSL_CTX *ctx, long mode);
long SSL_CTX_clear_mode(SSL_CTX *ctx, long mode);
long SSL_set_mode(SSL *ssl, long mode);
long SSL_clear_mode(SSL *ssl, long mode);
\&
long SSL_CTX_get_mode(SSL_CTX *ctx);
long SSL_get_mode(SSL *ssl);
.Ve
"DESCRIPTION"
Header "DESCRIPTION" \fBSSL_CTX_set_mode() adds the mode set via bitmask in mode to ctx.
Options already set before are not cleared.
\fBSSL_CTX_clear_mode() removes the mode set via bitmask in mode from ctx.
\fBSSL_set_mode() adds the mode set via bitmask in mode to ssl. Options already set before are not cleared. \fBSSL_clear_mode() removes the mode set via bitmask in mode from ssl.
\fBSSL_CTX_get_mode() returns the mode set for ctx.
\fBSSL_get_mode() returns the mode set for ssl.
"NOTES"
Header "NOTES" The following mode changes are available:
"\s-1SSL_MODE_ENABLE_PARTIAL_WRITE\s0" 4
Item "SSL_MODE_ENABLE_PARTIAL_WRITE" Allow SSL_write_ex(..., n, &r) to return with 0 < r < n (i.e. report success
when just a single record has been written). This works in a similar way for
\fBSSL_write(). When not set (the default), SSL_write_ex() or SSL_write() will only
report success once the complete chunk was written. Once SSL_write_ex() or
\fBSSL_write() returns successful, r bytes have been written and the next call
to SSL_write_ex() or SSL_write() must only send the n-r bytes left, imitating
the behaviour of write().
"\s-1SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER\s0" 4
Item "SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER" Make it possible to retry SSL_write_ex() or SSL_write() with changed buffer
location (the buffer contents must stay the same). This is not the default to
avoid the misconception that non-blocking SSL_write() behaves like
non-blocking write().
"\s-1SSL_MODE_AUTO_RETRY\s0" 4
Item "SSL_MODE_AUTO_RETRY" During normal operations, non-application data records might need to be sent or
received that the application is not aware of.
If a non-application data record was processed,
\fBSSL_read_ex\|(3) and SSL_read\|(3) can return with a failure and indicate the
need to retry with \s-1SSL_ERROR_WANT_READ\s0.
If such a non-application data record was processed, the flag
\fB\s-1SSL_MODE_AUTO_RETRY\s0 causes it to try to process the next record instead of
returning.
.Sp
In a non-blocking environment applications must be prepared to handle
incomplete read/write operations.
Setting \s-1SSL_MODE_AUTO_RETRY\s0 for a non-blocking \s-1BIO\s0 will process
non-application data records until either no more data is available or
an application data record has been processed.
.Sp
In a blocking environment, applications are not always prepared to
deal with the functions returning intermediate reports such as retry
requests, and setting the \s-1SSL_MODE_AUTO_RETRY\s0 flag will cause the functions
to only return after successfully processing an application data record or a
failure.
.Sp
Turning off \s-1SSL_MODE_AUTO_RETRY\s0 can be useful with blocking \s-1BIO\s0s in case
they are used in combination with something like select() or poll().
Otherwise the call to SSL_read() or SSL_read_ex() might hang when a
non-application record was sent and no application data was sent.
"\s-1SSL_MODE_RELEASE_BUFFERS\s0" 4
Item "SSL_MODE_RELEASE_BUFFERS" When we no longer need a read buffer or a write buffer for a given \s-1SSL,\s0
then release the memory we were using to hold it.
Using this flag can
save around 34k per idle \s-1SSL\s0 connection.
This flag has no effect on \s-1SSL\s0 v2 connections, or on \s-1DTLS\s0 connections.
"\s-1SSL_MODE_SEND_FALLBACK_SCSV\s0" 4
Item "SSL_MODE_SEND_FALLBACK_SCSV" Send \s-1TLS_FALLBACK_SCSV\s0 in the ClientHello.
To be set only by applications that reconnect with a downgraded protocol
version; see draft-ietf-tls-downgrade-scsv-00 for details.
.Sp
\s-1DO NOT ENABLE THIS\s0 if your application attempts a normal handshake.
Only use this in explicit fallback retries, following the guidance
in draft-ietf-tls-downgrade-scsv-00.
"\s-1SSL_MODE_ASYNC\s0" 4
Item "SSL_MODE_ASYNC" Enable asynchronous processing. \s-1TLS I/O\s0 operations may indicate a retry with
\s-1SSL_ERROR_WANT_ASYNC\s0 with this mode set if an asynchronous capable engine is
used to perform cryptographic operations. See SSL_get_error\|(3).
"\s-1SSL_MODE_DTLS_SCTP_LABEL_LENGTH_BUG\s0" 4
Item "SSL_MODE_DTLS_SCTP_LABEL_LENGTH_BUG" Older versions of OpenSSL had a bug in the computation of the label length
used for computing the endpoint-pair shared secret. The bug was that the
terminating zero was included in the length of the label. Setting this option
enables this behaviour to allow interoperability with such broken
implementations. Please note that setting this option breaks interoperability
with correct implementations. This option only applies to \s-1DTLS\s0 over \s-1SCTP.\s0
All modes are off by default except for \s-1SSL_MODE_AUTO_RETRY\s0 which is on by default since 1.1.1.
"RETURN VALUES"
Header "RETURN VALUES" \fBSSL_CTX_set_mode() and SSL_set_mode() return the new mode bitmask
after adding mode.
\fBSSL_CTX_get_mode() and SSL_get_mode() return the current bitmask.
"SEE ALSO"
Header "SEE ALSO" \fBssl\|(7), SSL_read_ex\|(3), SSL_read\|(3), SSL_write_ex\|(3) or
\fBSSL_write\|(3), SSL_get_error\|(3)
"HISTORY"
Header "HISTORY" \s-1SSL_MODE_ASYNC\s0 was added in OpenSSL 1.1.0.
"COPYRIGHT"
Header "COPYRIGHT" Copyright 2001-2019 The OpenSSL Project Authors. All Rights Reserved.
Licensed under the OpenSSL license (the \*(L"License\*(R"). You may not use this file except in compliance with the License. You can obtain a copy in the file \s-1LICENSE\s0 in the source distribution or at <https://www.openssl.org/source/license.html>.