Standard preamble:
========================================================================
..
.... Set up some character translations and predefined strings. \*(-- will
give an unbreakable dash, \*(PI will give pi, \*(L" will give a left
double quote, and \*(R" will give a right double quote. \*(C+ will
give a nicer C++. Capital omega is used to do unbreakable dashes and
therefore won't be available. \*(C` and \*(C' expand to `' in nroff,
nothing in troff, for use with C<>.
.tr \(*W- . ds -- \(*W- . ds PI pi . if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch . if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\" diablo 12 pitch . ds L" "" . ds R" "" . ds C` "" . ds C' "" 'br\} . ds -- \|\(em\| . ds PI \(*p . ds L" `` . ds R" '' . ds C` . ds C' 'br\}
Escape single quotes in literal strings from groff's Unicode transform.
If the F register is >0, we'll generate index entries on stderr for
titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index
entries marked with X<> in POD. Of course, you'll have to process the
output yourself in some meaningful fashion.
Avoid warning from groff about undefined register 'F'.
.. .nr rF 0 . if \nF \{\ . de IX . tm Index:\\$1\t\\n%\t"\\$2" .. . if !\nF==2 \{\ . nr % 0 . nr F 2 . \} . \} .\} .rr rF
Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2).
Fear. Run. Save yourself. No user-serviceable parts.
. \" fudge factors for nroff and troff . ds #H 0 . ds #V .8m . ds #F .3m . ds #[ \f1 . ds #] .\} . ds #H ((1u-(\\\\n(.fu%2u))*.13m) . ds #V .6m . ds #F 0 . ds #[ \& . ds #] \& .\} . \" simple accents for nroff and troff . ds ' \& . ds ` \& . ds ^ \& . ds , \& . ds ~ ~ . ds / .\} . ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u" . ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u' . ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u' . ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u' . ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u' . ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u' .\} . \" troff and (daisy-wheel) nroff accents . \" corrections for vroff . \" for low resolution devices (crt and lpr) \{\ . ds : e . ds 8 ss . ds o a . ds d- d\h'-1'\(ga . ds D- D\h'-1'\(hy . ds th \o'bp' . ds Th \o'LP' . ds ae ae . ds Ae AE .\} ========================================================================
Title "OCSP_RESP_FIND_STATUS 3"
way too many mistakes in technical documents.
\fBOCSP_resp_count() returns the number of \s-1OCSP_SINGLERESP\s0 structures in bs.
\fBOCSP_resp_get0() returns the \s-1OCSP_SINGLERESP\s0 structure in bs corresponding to index idx. Where idx runs from 0 to OCSP_resp_count(bs) - 1.
\fBOCSP_resp_find() searches bs for id and returns the index of the first matching entry after last or starting from the beginning if last is -1.
\fBOCSP_single_get0_status() extracts the fields of single in *reason, \fB*revtime, *thisupd and *nextupd.
\fBOCSP_resp_get0_produced_at() extracts the producedAt field from the single response bs.
\fBOCSP_resp_get0_signature() returns the signature from bs.
\fBOCSP_resp_get0_tbs_sigalg() returns the signatureAlgorithm from bs.
\fBOCSP_resp_get0_respdata() returns the tbsResponseData from bs.
\fBOCSP_resp_get0_certs() returns any certificates included in bs.
\fBOCSP_resp_get0_signer() attempts to retrieve the certificate that directly signed bs. The \s-1OCSP\s0 protocol does not require that this certificate is included in the certs field of the response, so additional certificates can be supplied in extra_certs if the certificates that may have signed the response are known via some out-of-band mechanism.
\fBOCSP_resp_get0_id() gets the responder id of bs. If the responder \s-1ID\s0 is a name then <*pname> is set to the name and *pid is set to \s-1NULL.\s0 If the responder \s-1ID\s0 is by key \s-1ID\s0 then *pid is set to the key \s-1ID\s0 and *pname is set to \s-1NULL.\s0 OCSP_resp_get1_id() leaves ownership of *pid and *pname with the caller, who is responsible for freeing them. Both functions return 1 in case of success and 0 in case of failure. If OCSP_resp_get1_id() returns 0, no freeing of the results is necessary.
\fBOCSP_check_validity() checks the validity of thisupd and nextupd values which will be typically obtained from OCSP_resp_find_status() or \fBOCSP_single_get0_status(). If sec is non-zero it indicates how many seconds leeway should be allowed in the check. If maxsec is positive it indicates the maximum age of thisupd in seconds.
\fBOCSP_basic_verify() checks that the basic response message bs is correctly signed and that the signer certificate can be validated. It takes st as the trusted store and certs as a set of untrusted intermediate certificates. The function first tries to find the signer certificate of the response in <certs>. It also searches the certificates the responder may have included in bs unless the flags contain \s-1OCSP_NOINTERN\s0. It fails if the signer certificate cannot be found. Next, the function checks the signature of bs and fails on error unless the flags contain \s-1OCSP_NOSIGS\s0. Then the function already returns success if the flags contain \s-1OCSP_NOVERIFY\s0 or if the signer certificate was found in certs and the flags contain \s-1OCSP_TRUSTOTHER\s0. Otherwise the function continues by validating the signer certificate. To this end, all certificates in cert and in bs are considered as untrusted certificates for the construction of the validation path for the signer certificate unless the \s-1OCSP_NOCHAIN\s0 flag is set. After successful path validation the function returns success if the \s-1OCSP_NOCHECKS\s0 flag is set. Otherwise it verifies that the signer certificate meets the \s-1OCSP\s0 issuer criteria including potential delegation. If this does not succeed and the \fBflags do not contain \s-1OCSP_NOEXPLICIT\s0 the function checks for explicit trust for \s-1OCSP\s0 signing in the root \s-1CA\s0 certificate.
\fBOCSP_resp_count() returns the total number of \s-1OCSP_SINGLERESP\s0 fields in \fBbs.
\fBOCSP_resp_get0() returns a pointer to an \s-1OCSP_SINGLERESP\s0 structure or \fB\s-1NULL\s0 if idx is out of range.
\fBOCSP_resp_find() returns the index of id in bs (which may be 0) or -1 if \fBid was not found.
\fBOCSP_single_get0_status() returns the status of single or -1 if an error occurred.
\fBOCSP_resp_get0_signer() returns 1 if the signing certificate was located, or 0 on error.
\fBOCSP_basic_verify() returns 1 on success, 0 on error, or -1 on fatal error such as malloc failure.
An \s-1OCSP\s0 response for a certificate contains thisUpdate and nextUpdate fields. Normally the current time should be between these two values. To account for clock skew the maxsec field can be set to non-zero in \fBOCSP_check_validity(). Some responders do not set the nextUpdate field, this would otherwise mean an ancient response would be considered valid: the \fBmaxsec parameter to OCSP_check_validity() can be used to limit the permitted age of responses.
The values written to *revtime, *thisupd and *nextupd by \fBOCSP_resp_find_status() and OCSP_single_get0_status() are internal pointers which \s-1MUST NOT\s0 be freed up by the calling application. Any or all of these parameters can be set to \s-1NULL\s0 if their value is not required.
Licensed under the OpenSSL license (the \*(L"License\*(R"). You may not use this file except in compliance with the License. You can obtain a copy in the file \s-1LICENSE\s0 in the source distribution or at <https://www.openssl.org/source/license.html>.