Automatically generated by Pod::Man 4.14 (Pod::Simple 3.42)

Standard preamble:
========================================================================
..

..

.. Set up some character translations and predefined strings. \*(-- will
give an unbreakable dash, \*(PI will give pi, \*(L" will give a left
double quote, and \*(R" will give a right double quote. \*(C+ will
give a nicer C++. Capital omega is used to do unbreakable dashes and
therefore won't be available. \*(C` and \*(C' expand to `' in nroff,
nothing in troff, for use with C<>.
.tr \(*W- . ds -- \(*W- . ds PI pi . if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch . if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\" diablo 12 pitch . ds L" "" . ds R" "" . ds C` "" . ds C' "" 'br\} . ds -- \|\(em\| . ds PI \(*p . ds L" `` . ds R" '' . ds C` . ds C' 'br\}
Escape single quotes in literal strings from groff's Unicode transform.

If the F register is >0, we'll generate index entries on stderr for
titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index
entries marked with X<> in POD. Of course, you'll have to process the
output yourself in some meaningful fashion.

Avoid warning from groff about undefined register 'F'.
.. .nr rF 0 . if \nF \{\ . de IX . tm Index:\\$1\t\\n%\t"\\$2" .. . if !\nF==2 \{\ . nr % 0 . nr F 2 . \} . \} .\} .rr rF Fear. Run. Save yourself. No user-serviceable parts.
. \" fudge factors for nroff and troff . ds #H 0 . ds #V .8m . ds #F .3m . ds #[ \f1 . ds #] .\} . ds #H ((1u-(\\\\n(.fu%2u))*.13m) . ds #V .6m . ds #F 0 . ds #[ \& . ds #] \& .\} . \" simple accents for nroff and troff . ds ' \& . ds ` \& . ds ^ \& . ds , \& . ds ~ ~ . ds / .\} . ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u" . ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u' . ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u' . ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u' . ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u' . ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u' .\} . \" troff and (daisy-wheel) nroff accents . \" corrections for vroff . \" for low resolution devices (crt and lpr) \{\ . ds : e . ds 8 ss . ds o a . ds d- d\h'-1'\(ga . ds D- D\h'-1'\(hy . ds th \o'bp' . ds Th \o'LP' . ds ae ae . ds Ae AE .\} ========================================================================

Title "CRYPTO_THREAD_RUN_ONCE 3ossl" For nroff, turn off justification. Always turn off hyphenation; it makes
way too many mistakes in technical documents.
CRYPTO_THREAD_run_once, CRYPTO_THREAD_lock_new, CRYPTO_THREAD_read_lock, CRYPTO_THREAD_write_lock, CRYPTO_THREAD_unlock, CRYPTO_THREAD_lock_free, CRYPTO_atomic_add, CRYPTO_atomic_or, CRYPTO_atomic_load - OpenSSL thread support Header "SYNOPSIS" .Vb 1 #include <openssl/crypto.h> \& CRYPTO_ONCE CRYPTO_ONCE_STATIC_INIT; int CRYPTO_THREAD_run_once(CRYPTO_ONCE *once, void (*init)(void)); \& CRYPTO_RWLOCK *CRYPTO_THREAD_lock_new(void); int CRYPTO_THREAD_read_lock(CRYPTO_RWLOCK *lock); int CRYPTO_THREAD_write_lock(CRYPTO_RWLOCK *lock); int CRYPTO_THREAD_unlock(CRYPTO_RWLOCK *lock); void CRYPTO_THREAD_lock_free(CRYPTO_RWLOCK *lock); \& int CRYPTO_atomic_add(int *val, int amount, int *ret, CRYPTO_RWLOCK *lock); int CRYPTO_atomic_or(uint64_t *val, uint64_t op, uint64_t *ret, CRYPTO_RWLOCK *lock); int CRYPTO_atomic_load(uint64_t *val, uint64_t *ret, CRYPTO_RWLOCK *lock); .Ve Header "DESCRIPTION" OpenSSL can be safely used in multi-threaded applications provided that support for the underlying \s-1OS\s0 threading \s-1API\s0 is built-in. Currently, OpenSSL supports the pthread and Windows APIs. OpenSSL can also be built without any multi-threading support, for example on platforms that don't provide any threading support or that provide a threading \s-1API\s0 that is not yet supported by OpenSSL.

The following multi-threading function are provided:

\fBCRYPTO_THREAD_run_once() can be used to perform one-time initialization. The once argument must be a pointer to a static object of type \fB\s-1CRYPTO_ONCE\s0 that was statically initialized to the value \fB\s-1CRYPTO_ONCE_STATIC_INIT\s0. The init argument is a pointer to a function that performs the desired exactly once initialization. In particular, this can be used to allocate locks in a thread-safe manner, which can then be used with the locking functions below. \fBCRYPTO_THREAD_lock_new() allocates, initializes and returns a new read/write lock. \fBCRYPTO_THREAD_read_lock() locks the provided lock for reading. \fBCRYPTO_THREAD_write_lock() locks the provided lock for writing. \fBCRYPTO_THREAD_unlock() unlocks the previously locked lock. \fBCRYPTO_THREAD_lock_free() frees the provided lock. \fBCRYPTO_atomic_add() atomically adds amount to *val and returns the result of the operation in *ret. lock will be locked, unless atomic operations are supported on the specific platform. Because of this, if a variable is modified by CRYPTO_atomic_add() then CRYPTO_atomic_add() must be the only way that the variable is modified. If atomic operations are not supported and lock is \s-1NULL,\s0 then the function will fail. \fBCRYPTO_atomic_or() performs an atomic bitwise or of op and *val and stores the result back in *val. It also returns the result of the operation in \fI*ret. lock will be locked, unless atomic operations are supported on the specific platform. Because of this, if a variable is modified by \fBCRYPTO_atomic_or() or read by CRYPTO_atomic_load() then CRYPTO_atomic_or() must be the only way that the variable is modified. If atomic operations are not supported and lock is \s-1NULL,\s0 then the function will fail. \fBCRYPTO_atomic_load() atomically loads the contents of *val into *ret. \fIlock will be locked, unless atomic operations are supported on the specific platform. Because of this, if a variable is modified by CRYPTO_atomic_or() or read by CRYPTO_atomic_load() then CRYPTO_atomic_load() must be the only way that the variable is read. If atomic operations are not supported and lock is \s-1NULL,\s0 then the function will fail. Header "RETURN VALUES" \fBCRYPTO_THREAD_run_once() returns 1 on success, or 0 on error.

\fBCRYPTO_THREAD_lock_new() returns the allocated lock, or \s-1NULL\s0 on error.

\fBCRYPTO_THREAD_lock_free() returns no value.

The other functions return 1 on success, or 0 on error.

Header "NOTES" On Windows platforms the CRYPTO_THREAD_* types and functions in the \fI<openssl/crypto.h> header are dependent on some of the types customarily made available by including <windows.h>. The application developer is likely to require control over when the latter is included, commonly as one of the first included headers. Therefore, it is defined as an application developer's responsibility to include <windows.h> prior to \fI<openssl/crypto.h> where use of CRYPTO_THREAD_* types and functions is required. Header "EXAMPLES" You can find out if OpenSSL was configured with thread support:

.Vb 6 #include <openssl/opensslconf.h> #if defined(OPENSSL_THREADS) /* thread support enabled */ #else /* no thread support */ #endif .Ve

This example safely initializes and uses a lock.

.Vb 4 #ifdef _WIN32 # include <windows.h> #endif #include <openssl/crypto.h> \& static CRYPTO_ONCE once = CRYPTO_ONCE_STATIC_INIT; static CRYPTO_RWLOCK *lock; \& static void myinit(void) { lock = CRYPTO_THREAD_lock_new(); } \& static int mylock(void) { if (!CRYPTO_THREAD_run_once(&once, void init) || lock == NULL) return 0; return CRYPTO_THREAD_write_lock(lock); } \& static int myunlock(void) { return CRYPTO_THREAD_unlock(lock); } \& int serialized(void) { int ret = 0; \& if (mylock()) { /* Your code here, do not return without releasing the lock! */ ret = ... ; } myunlock(); return ret; } .Ve

Finalization of locks is an advanced topic, not covered in this example. This can only be done at process exit or when a dynamically loaded library is no longer in use and is unloaded. The simplest solution is to just \*(L"leak\*(R" the lock in applications and not repeatedly load/unload shared libraries that allocate locks.

Header "SEE ALSO" \fBcrypto\|(7), openssl-threads\|(7). Header "COPYRIGHT" Copyright 2000-2021 The OpenSSL Project Authors. All Rights Reserved.

Licensed under the Apache License 2.0 (the \*(L"License\*(R"). You may not use this file except in compliance with the License. You can obtain a copy in the file \s-1LICENSE\s0 in the source distribution or at <https://www.openssl.org/source/license.html>.