Standard preamble:
========================================================================
..
.... Set up some character translations and predefined strings. \*(-- will
give an unbreakable dash, \*(PI will give pi, \*(L" will give a left
double quote, and \*(R" will give a right double quote. \*(C+ will
give a nicer C++. Capital omega is used to do unbreakable dashes and
therefore won't be available. \*(C` and \*(C' expand to `' in nroff,
nothing in troff, for use with C<>.
.tr \(*W- . ds -- \(*W- . ds PI pi . if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch . if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\" diablo 12 pitch . ds L" "" . ds R" "" . ds C` "" . ds C' "" 'br\} . ds -- \|\(em\| . ds PI \(*p . ds L" `` . ds R" '' . ds C` . ds C' 'br\}
Escape single quotes in literal strings from groff's Unicode transform.
If the F register is >0, we'll generate index entries on stderr for
titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index
entries marked with X<> in POD. Of course, you'll have to process the
output yourself in some meaningful fashion.
Avoid warning from groff about undefined register 'F'.
.. .nr rF 0 . if \nF \{\ . de IX . tm Index:\\$1\t\\n%\t"\\$2" .. . if !\nF==2 \{\ . nr % 0 . nr F 2 . \} . \} .\} .rr rF
Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2).
Fear. Run. Save yourself. No user-serviceable parts.
. \" fudge factors for nroff and troff . ds #H 0 . ds #V .8m . ds #F .3m . ds #[ \f1 . ds #] .\} . ds #H ((1u-(\\\\n(.fu%2u))*.13m) . ds #V .6m . ds #F 0 . ds #[ \& . ds #] \& .\} . \" simple accents for nroff and troff . ds ' \& . ds ` \& . ds ^ \& . ds , \& . ds ~ ~ . ds / .\} . ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u" . ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u' . ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u' . ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u' . ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u' . ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u' .\} . \" troff and (daisy-wheel) nroff accents . \" corrections for vroff . \" for low resolution devices (crt and lpr) \{\ . ds : e . ds 8 ss . ds o a . ds d- d\h'-1'\(ga . ds D- D\h'-1'\(hy . ds th \o'bp' . ds Th \o'LP' . ds ae ae . ds Ae AE .\} ========================================================================
Title "BIO_S_MEM 3"
way too many mistakes in technical documents.
A memory \s-1BIO\s0 is a source/sink \s-1BIO\s0 which uses memory for its I/O. Data written to a memory \s-1BIO\s0 is stored in a \s-1BUF_MEM\s0 structure which is extended as appropriate to accommodate the stored data.
\fBBIO_s_secmem() is like BIO_s_mem() except that the secure heap is used for buffer storage.
Any data written to a memory \s-1BIO\s0 can be recalled by reading from it. Unless the memory \s-1BIO\s0 is read only any data read from it is deleted from the \s-1BIO.\s0
Memory BIOs support BIO_gets() and BIO_puts().
If the \s-1BIO_CLOSE\s0 flag is set when a memory \s-1BIO\s0 is freed then the underlying \s-1BUF_MEM\s0 structure is also freed.
Calling BIO_reset() on a read write memory \s-1BIO\s0 clears any data in it if the flag \s-1BIO_FLAGS_NONCLEAR_RST\s0 is not set, otherwise it just restores the read pointer to the state it was just after the last write was performed and the data can be read again. On a read only \s-1BIO\s0 it similarly restores the \s-1BIO\s0 to its original state and the read only data can be read again.
\fBBIO_eof() is true if no data is in the \s-1BIO.\s0
\fBBIO_ctrl_pending() returns the number of bytes currently stored.
\fBBIO_set_mem_eof_return() sets the behaviour of memory \s-1BIO\s0 b when it is empty. If the v is zero then an empty memory \s-1BIO\s0 will return \s-1EOF\s0 (that is it will return zero and BIO_should_retry(b) will be false. If v is non zero then it will return v when it is empty and it will set the read retry flag (that is BIO_read_retry(b) is true). To avoid ambiguity with a normal positive return value v should be set to a negative value, typically -1.
\fBBIO_get_mem_data() sets *pp to a pointer to the start of the memory BIOs data and returns the total amount of data available. It is implemented as a macro.
\fBBIO_set_mem_buf() sets the internal \s-1BUF_MEM\s0 structure to bm and sets the close flag to c, that is c should be either \s-1BIO_CLOSE\s0 or \s-1BIO_NOCLOSE.\s0 It is a macro.
\fBBIO_get_mem_ptr() places the underlying \s-1BUF_MEM\s0 structure in *pp. It is a macro.
\fBBIO_new_mem_buf() creates a memory \s-1BIO\s0 using len bytes of data at buf, if len is -1 then the buf is assumed to be nul terminated and its length is determined by strlen. The \s-1BIO\s0 is set to a read only state and as a result cannot be written to. This is useful when some data needs to be made available from a static area of memory in the form of a \s-1BIO.\s0 The supplied data is read directly from the supplied buffer: it is not copied first, so the supplied area of memory must be unchanged until the \s-1BIO\s0 is freed.
Every write after partial read (not all data in the memory buffer was read) to a read write memory \s-1BIO\s0 will have to move the unread data with an internal copy operation, if a \s-1BIO\s0 contains a lot of data and it is read in small chunks intertwined with writes the operation can be very slow. Adding a buffering \s-1BIO\s0 to the chain can speed up the process.
Calling BIO_set_mem_buf() on a \s-1BIO\s0 created with BIO_new_secmem() will give undefined results, including perhaps a program crash.
Switching the memory \s-1BIO\s0 from read write to read only is not supported and can give undefined results including a program crash. There are two notable exceptions to the rule. The first one is to assign a static memory buffer immediately after \s-1BIO\s0 creation and set the \s-1BIO\s0 as read only.
The other supported sequence is to start with read write \s-1BIO\s0 then temporarily switch it to read only and call BIO_reset() on the read only \s-1BIO\s0 immediately before switching it back to read write. Before the \s-1BIO\s0 is freed it must be switched back to the read write mode.
Calling BIO_get_mem_ptr() on read only \s-1BIO\s0 will return a \s-1BUF_MEM\s0 that contains only the remaining data to be read. If the close status of the \s-1BIO\s0 is set to \s-1BIO_NOCLOSE,\s0 before freeing the \s-1BUF_MEM\s0 the data pointer in it must be set to \s-1NULL\s0 as the data pointer does not point to an allocated memory.
Calling BIO_reset() on a read write memory \s-1BIO\s0 with \s-1BIO_FLAGS_NONCLEAR_RST\s0 flag set can have unexpected outcome when the reads and writes to the \s-1BIO\s0 are intertwined. As documented above the \s-1BIO\s0 will be reset to the state after the last completed write operation. The effects of reads preceding that write operation cannot be undone.
Calling BIO_get_mem_ptr() prior to a BIO_reset() call with \s-1BIO_FLAGS_NONCLEAR_RST\s0 set has the same effect as a write operation.
\fBBIO_set_mem_eof_return(), BIO_set_mem_buf() and BIO_get_mem_ptr() return 1 on success or a value which is less than or equal to 0 if an error occurred.
\fBBIO_get_mem_data() returns the total number of bytes available on success, 0 if b is \s-1NULL,\s0 or a negative value in case of other errors.
\fBBIO_new_mem_buf() returns a valid \s-1BIO\s0 structure on success or \s-1NULL\s0 on error.
.Vb 1 BIO *mem = BIO_new(BIO_s_mem()); \& BIO_puts(mem, "Hello World\en"); .Ve
Create a read only memory \s-1BIO:\s0
.Vb 2 char data[] = "Hello World"; BIO *mem = BIO_new_mem_buf(data, -1); .Ve
Extract the \s-1BUF_MEM\s0 structure from a memory \s-1BIO\s0 and then free up the \s-1BIO:\s0
.Vb 1 BUF_MEM *bptr; \& BIO_get_mem_ptr(mem, &bptr); BIO_set_close(mem, BIO_NOCLOSE); /* So BIO_free() leaves BUF_MEM alone */ BIO_free(mem); .Ve
Licensed under the OpenSSL license (the \*(L"License\*(R"). You may not use this file except in compliance with the License. You can obtain a copy in the file \s-1LICENSE\s0 in the source distribution or at <https://www.openssl.org/source/license.html>.