xref: /freebsd/sbin/route/route.8 (revision 39ee7a7a6bdd1557b1c3532abf60d139798ac88b)
1.\" Copyright (c) 1983, 1991, 1993
2.\"	The Regents of the University of California.  All rights reserved.
3.\"
4.\" Redistribution and use in source and binary forms, with or without
5.\" modification, are permitted provided that the following conditions
6.\" are met:
7.\" 1. Redistributions of source code must retain the above copyright
8.\"    notice, this list of conditions and the following disclaimer.
9.\" 2. Redistributions in binary form must reproduce the above copyright
10.\"    notice, this list of conditions and the following disclaimer in the
11.\"    documentation and/or other materials provided with the distribution.
12.\" 4. Neither the name of the University nor the names of its contributors
13.\"    may be used to endorse or promote products derived from this software
14.\"    without specific prior written permission.
15.\"
16.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
17.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
18.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
19.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
20.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
21.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
22.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
23.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
24.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
25.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
26.\" SUCH DAMAGE.
27.\"
28.\"     @(#)route.8	8.3 (Berkeley) 3/19/94
29.\" $FreeBSD$
30.\"
31.Dd November 11, 2014
32.Dt ROUTE 8
33.Os
34.Sh NAME
35.Nm route
36.Nd manually manipulate the routing tables
37.Sh SYNOPSIS
38.Nm
39.Op Fl dnqtv
40.Ar command
41.Oo
42.Op Ar modifiers
43.Ar args
44.Oc
45.Sh DESCRIPTION
46The
47.Nm
48utility is used to manually manipulate the network
49routing tables.
50It normally is not needed, as a
51system routing table management daemon, such as
52.Xr routed 8 ,
53should tend to this task.
54.Pp
55The
56.Nm
57utility supports a limited number of general options,
58but a rich command language, enabling the user to specify
59any arbitrary request that could be delivered via the
60programmatic interface discussed in
61.Xr route 4 .
62.Pp
63The following options are available:
64.Bl -tag -width indent
65.It Fl 4
66Specify
67.Cm inet
68address family as family hint for subcommands.
69.It Fl 6
70Specify
71.Cm inet
72address family as family hint for subcommands.
73.It Fl d
74Run in debug-only mode, i.e., do not actually modify the routing table.
75.It Fl n
76Bypass attempts to print host and network names symbolically
77when reporting actions.
78(The process of translating between symbolic
79names and numerical equivalents can be quite time consuming, and
80may require correct operation of the network; thus it may be expedient
81to forget this, especially when attempting to repair networking operations).
82.It Fl t
83Run in test-only mode.
84.Pa /dev/null
85is used instead of a socket.
86.It Fl v
87(verbose) Print additional details.
88.It Fl q
89Suppress all output from the
90.Cm add , change , delete ,
91and
92.Cm flush
93commands.
94.El
95.Pp
96The
97.Nm
98utility provides the following commands:
99.Pp
100.Bl -tag -width Fl -compact
101.It Cm add
102Add a route.
103.It Cm flush
104Remove all routes.
105.It Cm delete
106Delete a specific route.
107.It Cm del
108Another name for the
109.Cm delete
110command.
111.It Cm change
112Change aspects of a route (such as its gateway).
113.It Cm get
114Lookup and display the route for a destination.
115.It Cm monitor
116Continuously report any changes to the routing information base,
117routing lookup misses, or suspected network partitionings.
118.It Cm show
119Another name for the
120.Cm get
121command.
122.El
123.Pp
124The monitor command has the syntax:
125.Pp
126.Bd -ragged -offset indent -compact
127.Nm
128.Op Fl n
129.Cm monitor Op Fl fib Ar number
130.Ed
131.Pp
132The flush command has the syntax:
133.Pp
134.Bd -ragged -offset indent -compact
135.Nm
136.Oo Fl n Cm flush Oc Oo Ar family Oc Op Fl fib Ar number
137.Ed
138.Pp
139If the
140.Cm flush
141command is specified,
142.Nm
143will ``flush'' the routing tables of all gateway entries.
144When the address family may is specified by any of the
145.Fl osi ,
146.Fl xns ,
147.Fl inet6 ,
148or
149.Fl inet
150modifiers, only routes having destinations with addresses in the
151delineated family will be deleted.
152Additionally,
153.Fl 4
154or
155.Fl 6
156can be used as aliases for
157.Fl inet
158and
159.Fl inet6
160modifiers.
161When a
162.Fl fib
163option is specified, the operation will be applied to
164the specified FIB
165.Pq routing table .
166.Pp
167The other commands have the following syntax:
168.Pp
169.Bd -ragged -offset indent -compact
170.Nm
171.Op Fl n
172.Ar command
173.Op Fl net No \&| Fl host
174.Ar destination gateway
175.Op Ar netmask
176.Op Fl fib Ar number
177.Ed
178.Pp
179where
180.Ar destination
181is the destination host or network,
182.Ar gateway
183is the next-hop intermediary via which packets should be routed.
184Routes to a particular host may be distinguished from those to
185a network by interpreting the Internet address specified as the
186.Ar destination
187argument.
188The optional modifiers
189.Fl net
190and
191.Fl host
192force the destination to be interpreted as a network or a host, respectively.
193Otherwise, if the
194.Ar destination
195has a
196.Dq local address part
197of
198INADDR_ANY
199.Pq Li 0.0.0.0 ,
200or if the
201.Ar destination
202is the symbolic name of a network, then the route is
203assumed to be to a network; otherwise, it is presumed to be a
204route to a host.
205Optionally, the
206.Ar destination
207could also be specified in the
208.Ar net Ns / Ns Ar bits
209format.
210.Pp
211For example,
212.Li 128.32
213is interpreted as
214.Fl host Li 128.0.0.32 ;
215.Li 128.32.130
216is interpreted as
217.Fl host Li 128.32.0.130 ;
218.Fl net Li 128.32
219is interpreted as
220.Li 128.32.0.0;
221.Fl net Li 128.32.130
222is interpreted as
223.Li 128.32.130.0;
224and
225.Li 192.168.64/20
226is interpreted as
227.Fl net Li 192.168.64 Fl netmask Li 255.255.240.0 .
228.Pp
229A
230.Ar destination
231of
232.Ar default
233is a synonym for the default route.
234For
235.Li IPv4
236it is
237.Fl net Fl inet Li 0.0.0.0 ,
238and for
239.Li IPv6
240it is
241.Fl net Fl inet6 Li :: .
242.Pp
243If the destination is directly reachable
244via an interface requiring
245no intermediary system to act as a gateway, the
246.Fl interface
247modifier should be specified;
248the gateway given is the address of this host on the common network,
249indicating the interface to be used for transmission.
250Alternately, if the interface is point to point the name of the interface
251itself may be given, in which case the route remains valid even
252if the local or remote addresses change.
253.Pp
254The optional modifiers
255.Fl xns ,
256.Fl osi ,
257and
258.Fl link
259specify that all subsequent addresses are in the
260.Tn XNS
261or
262.Tn OSI
263address families,
264or are specified as link-level addresses,
265and the names must be numeric specifications rather than
266symbolic names.
267.Pp
268The optional
269.Fl netmask
270modifier is intended
271to achieve the effect of an
272.Tn OSI
273.Tn ESIS
274redirect with the netmask option,
275or to manually add subnet routes with
276netmasks different from that of the implied network interface
277(as would otherwise be communicated using the OSPF or ISIS routing protocols).
278One specifies an additional ensuing address parameter
279(to be interpreted as a network mask).
280The implicit network mask generated in the AF_INET case
281can be overridden by making sure this option follows the destination parameter.
282.Pp
283For
284.Dv AF_INET6 ,
285the
286.Fl prefixlen
287qualifier
288is available instead of the
289.Fl mask
290qualifier because non-continuous masks are not allowed in IPv6.
291For example,
292.Fl prefixlen Li 32
293specifies network mask of
294.Li ffff:ffff:0000:0000:0000:0000:0000:0000
295to be used.
296The default value of prefixlen is 64 to get along with
297the aggregatable address.
298But 0 is assumed if
299.Cm default
300is specified.
301Note that the qualifier works only for
302.Dv AF_INET6
303address family.
304.Pp
305Routes have associated flags which influence operation of the protocols
306when sending to destinations matched by the routes.
307These flags may be set (or sometimes cleared)
308by indicating the following corresponding modifiers:
309.Bd -literal
310-xresolve  RTF_XRESOLVE   - emit mesg on use (for external lookup)
311-iface    ~RTF_GATEWAY    - destination is directly reachable
312-static    RTF_STATIC     - manually added route
313-nostatic ~RTF_STATIC     - pretend route added by kernel or daemon
314-reject    RTF_REJECT     - emit an ICMP unreachable when matched
315-blackhole RTF_BLACKHOLE  - silently discard pkts (during updates)
316-proto1    RTF_PROTO1     - set protocol specific routing flag #1
317-proto2    RTF_PROTO2     - set protocol specific routing flag #2
318.Ed
319.Pp
320The optional modifiers
321.Fl rtt ,
322.Fl rttvar ,
323.Fl sendpipe ,
324.Fl recvpipe ,
325.Fl mtu ,
326.Fl hopcount ,
327.Fl expire ,
328and
329.Fl ssthresh
330provide initial values to quantities maintained in the routing entry
331by transport level protocols, such as TCP or TP4.
332These may be individually locked by preceding each such modifier to
333be locked by
334the
335.Fl lock
336meta-modifier, or one can
337specify that all ensuing metrics may be locked by the
338.Fl lockrest
339meta-modifier.
340.Pp
341Note that
342.Fl expire
343accepts expiration time of the route as the number of seconds since the
344Epoch
345.Pq see Xr time 3 .
346When the first character of the number is
347.Dq +
348or
349.Dq - ,
350it is interpreted as a value relative to the current time.
351.Pp
352The optional modifier
353.Fl fib Ar number
354specifies that the command will be applied to a non-default FIB.
355The
356.Ar number
357must be smaller than the
358.Va net.fibs
359.Xr sysctl 8
360MIB.
361When this modifier is not specified,
362or a negative number is specified,
363the default FIB shown in the
364.Va net.my_fibnum
365.Xr sysctl 8
366MIB will be used.
367.Pp
368The
369.Ar number
370allows multiple FIBs by a comma-separeted list and/or range
371specification.
372The
373.Qq Fl fib Li 2,4,6
374means the FIB number 2, 4, and 6.
375The
376.Qq Fl fib Li 1,3-5,6
377means the 1, 3, 4, 5, and 6.
378.Pp
379In a
380.Cm change
381or
382.Cm add
383command where the destination and gateway are not sufficient to specify
384the route (as in the
385.Tn ISO
386case where several interfaces may have the
387same address), the
388.Fl ifp
389or
390.Fl ifa
391modifiers may be used to determine the interface or interface address.
392.Pp
393All symbolic names specified for a
394.Ar destination
395or
396.Ar gateway
397are looked up first as a host name using
398.Xr gethostbyname 3 .
399If this lookup fails,
400.Xr getnetbyname 3
401is then used to interpret the name as that of a network.
402.Pp
403The
404.Nm
405utility uses a routing socket and the new message types
406.Dv RTM_ADD , RTM_DELETE , RTM_GET ,
407and
408.Dv RTM_CHANGE .
409As such, only the super-user may modify
410the routing tables.
411.Sh EXIT STATUS
412.Ex -std
413.Sh EXAMPLES
414Add a default route to the network routing table.
415This will send all packets for destinations not available in the routing table
416to the default gateway at 192.168.1.1:
417.Pp
418.Dl route add -net 0.0.0.0/0 192.168.1.1
419.Pp
420A shorter version of adding a default route can also be written as:
421.Pp
422.Dl route add default 192.168.1.1
423.Pp
424Add a static route to the 172.16.10.0/24 network via the 172.16.1.1 gateway:
425.Pp
426.Dl route add -net 172.16.10.0/24 172.16.1.1
427.Pp
428Change the gateway of an already established static route in the routing table:
429.Pp
430.Dl route change -net 172.16.10.0/24 172.16.1.2
431.Pp
432Display the route for a destination network:
433.Pp
434.Dl route show 172.16.10.0
435.Pp
436Delete a static route from the routing table:
437.Pp
438.Dl route delete -net 172.16.10.0/24 172.16.1.2
439.Pp
440Remove all routes from the routing table:
441.Pp
442.Dl route flush
443.Sh DIAGNOSTICS
444.Bl -diag
445.It "add [host \&| network ] %s: gateway %s flags %x"
446The specified route is being added to the tables.
447The
448values printed are from the routing table entry supplied
449in the
450.Xr ioctl 2
451call.
452If the gateway address used was not the primary address of the gateway
453(the first one returned by
454.Xr gethostbyname 3 ) ,
455the gateway address is printed numerically as well as symbolically.
456.It "delete [ host \&| network ] %s: gateway %s flags %x"
457As above, but when deleting an entry.
458.It "%s %s done"
459When the
460.Cm flush
461command is specified, each routing table entry deleted
462is indicated with a message of this form.
463.It "Network is unreachable"
464An attempt to add a route failed because the gateway listed was not
465on a directly-connected network.
466The next-hop gateway must be given.
467.It "not in table"
468A delete operation was attempted for an entry which
469was not present in the tables.
470.It "routing table overflow"
471An add operation was attempted, but the system was
472low on resources and was unable to allocate memory
473to create the new entry.
474.It "gateway uses the same route"
475A
476.Cm change
477operation resulted in a route whose gateway uses the
478same route as the one being changed.
479The next-hop gateway should be reachable through a different route.
480.El
481.Sh SEE ALSO
482.\".Xr esis 4 ,
483.Xr netintro 4 ,
484.Xr route 4 ,
485.Xr arp 8 ,
486.Xr routed 8
487.\".Xr XNSrouted 8
488.Sh HISTORY
489The
490.Nm
491utility appeared in
492.Bx 4.2 .
493.Sh BUGS
494The first paragraph may have slightly exaggerated
495.Xr routed 8 Ns 's
496abilities.
497.Pp
498Currently, routes with the
499.Dv RTF_BLACKHOLE
500flag set need to have the gateway set to an instance of the
501.Xr lo 4
502driver, using the
503.Fl iface
504option, for the flag to have any effect; unless IP fast forwarding
505is enabled, in which case the meaning of the flag will always
506be honored.
507