1.\" 2.\" Copyright (c) 1980, 1989, 1991, 1993 3.\" The Regents of the University of California. All rights reserved. 4.\" 5.\" Redistribution and use in source and binary forms, with or without 6.\" modification, are permitted provided that the following conditions 7.\" are met: 8.\" 1. Redistributions of source code must retain the above copyright 9.\" notice, this list of conditions and the following disclaimer. 10.\" 2. Redistributions in binary form must reproduce the above copyright 11.\" notice, this list of conditions and the following disclaimer in the 12.\" documentation and/or other materials provided with the distribution. 13.\" 3. Neither the name of the University nor the names of its contributors 14.\" may be used to endorse or promote products derived from this software 15.\" without specific prior written permission. 16.\" 17.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 18.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 19.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 20.\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 21.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 22.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 23.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 24.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 25.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 26.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 27.\" SUCH DAMAGE. 28.\" 29.\" @(#)fsck.8 8.4 (Berkeley) 5/9/95 30.\" $FreeBSD$ 31.\" 32.Dd May 3, 2019 33.Dt FSCK_FFS 8 34.Os 35.Sh NAME 36.Nm fsck_ffs , 37.Nm fsck_ufs 38.Nd file system consistency check and interactive repair 39.Sh SYNOPSIS 40.Nm 41.Op Fl BCdEFfnpRrSyZz 42.Op Fl b Ar block 43.Op Fl c Ar level 44.Op Fl m Ar mode 45.Ar filesystem 46.Ar ... 47.Sh DESCRIPTION 48The specified disk partitions and/or file systems are checked. 49In "preen" or "check clean" mode the clean flag of each file system's 50superblock is examined and only those file systems that are not marked clean 51are checked. 52File systems are marked clean when they are unmounted, 53when they have been mounted read-only, or when 54.Nm 55runs on them successfully. 56If the 57.Fl f 58option is specified, the file systems 59will be checked regardless of the state of their clean flag. 60.Pp 61The kernel takes care that only a restricted class of innocuous file system 62inconsistencies can happen unless hardware or software failures intervene. 63These are limited to the following: 64.Pp 65.Bl -item -compact -offset indent 66.It 67Unreferenced inodes 68.It 69Link counts in inodes too large 70.It 71Missing blocks in the free map 72.It 73Blocks in the free map also in files 74.It 75Counts in the super-block wrong 76.El 77.Pp 78These are the only inconsistencies that 79.Nm 80with the 81.Fl p 82option will correct; if it encounters other inconsistencies, it exits 83with an abnormal return status and an automatic reboot will then fail. 84For each corrected inconsistency one or more lines will be printed 85identifying the file system on which the correction will take place, 86and the nature of the correction. 87After successfully correcting a file system, 88.Nm 89will print the number of files on that file system, 90the number of used and free blocks, 91and the percentage of fragmentation. 92.Pp 93If sent a 94.Dv QUIT 95signal, 96.Nm 97will finish the file system checks, then exit with an abnormal 98return status that causes an automatic reboot to fail. 99This is useful when you want to finish the file system checks during an 100automatic reboot, 101but do not want the machine to come up multiuser after the checks complete. 102.Pp 103If 104.Nm 105receives a 106.Dv SIGINFO 107(see the 108.Dq status 109argument for 110.Xr stty 1 ) 111signal, a line will be written to the standard output indicating 112the name of the device currently being checked, the current phase 113number and phase-specific progress information. 114.Pp 115Without the 116.Fl p 117option, 118.Nm 119audits and interactively repairs inconsistent conditions for file systems. 120If the file system is inconsistent the operator is prompted for concurrence 121before each correction is attempted. 122It should be noted that some of the corrective actions which are not 123correctable under the 124.Fl p 125option will result in some loss of data. 126The amount and severity of data lost may be determined from the diagnostic 127output. 128The default action for each consistency correction 129is to wait for the operator to respond 130.Li yes 131or 132.Li no . 133If the operator does not have write permission on the file system 134.Nm 135will default to a 136.Fl n 137action. 138.Pp 139The following flags are interpreted by 140.Nm : 141.Bl -tag -width indent 142.It Fl B 143A check is done on the specified and possibly active file system. 144The set of corrections that can be done is limited to those done 145when running in preen mode (see the 146.Fl p 147flag). 148If unexpected errors are found, 149the file system is marked as needing a foreground check and 150.Nm 151exits without attempting any further cleaning. 152.It Fl b 153Use the block specified immediately after the flag as 154the super block for the file system. 155An alternate super block is usually located at block 32 for UFS1, 156and block 192 for UFS2. 157.Pp 158See the 159.Fl N 160flag of 161.Xr newfs 8 . 162.It Fl C 163Check if file system was dismounted cleanly. 164If so, skip file system checks (like "preen"). 165However, if the file system was not cleanly dismounted, do full checks, 166as if 167.Nm 168was invoked without 169.Fl C . 170.It Fl c 171Convert the file system to the specified level. 172Note that the level of a file system can only be raised. 173There are currently four levels defined: 174.Bl -tag -width indent 175.It 0 176The file system is in the old (static table) format. 177.It 1 178The file system is in the new (dynamic table) format. 179.It 2 180The file system supports 32-bit uid's and gid's, 181short symbolic links are stored in the inode, 182and directories have an added field showing the file type. 183.It 3 184If maxcontig is greater than one, 185build the free segment maps to aid in finding contiguous sets of blocks. 186If maxcontig is equal to one, delete any existing segment maps. 187.El 188.Pp 189In interactive mode, 190.Nm 191will list the conversion to be made 192and ask whether the conversion should be done. 193If a negative answer is given, 194no further operations are done on the file system. 195In preen mode, 196the conversion is listed and done if 197possible without user interaction. 198Conversion in preen mode is best used when all the file systems 199are being converted at once. 200The format of a file system can be determined from the 201first line of output from 202.Xr dumpfs 8 . 203.Pp 204This option implies the 205.Fl f 206flag. 207.It Fl d 208Enable debugging messages. 209.It Fl E 210Clear unallocated blocks, notifying the underlying device that they 211are not used and that their contents may be discarded. 212This is useful for filesystems which have been mounted on systems 213without TRIM support, or with TRIM support disabled, as well as 214filesystems which have been copied from one device to another. 215.Pp 216See the 217.Fl E 218and 219.Fl t 220flags of 221.Xr newfs 8 , 222and 223the 224.Fl t 225flag of 226.Xr tunefs 8 . 227.It Fl F 228Determine whether the file system needs to be cleaned immediately 229in foreground, or if its cleaning can be deferred to background. 230To be eligible for background cleaning it must have been running 231with soft updates, not have been marked as needing a foreground check, 232and be mounted and writable when the background check is to be done. 233If these conditions are met, then 234.Nm 235exits with a zero exit status. 236Otherwise it exits with a non-zero exit status. 237If the file system is clean, 238it will exit with a non-zero exit status so that the clean status 239of the file system can be verified and reported during the foreground 240checks. 241Note that when invoked with the 242.Fl F 243flag, no cleanups are done. 244The only thing that 245.Nm 246does is to determine whether a foreground or background 247check is needed and exit with an appropriate status code. 248.It Fl f 249Force 250.Nm 251to check 252.Sq clean 253file systems when preening. 254.It Fl m 255Use the mode specified in octal immediately after the flag as the 256permission bits to use when creating the 257.Pa lost+found 258directory rather than the default 1777. 259In particular, systems that do not wish to have lost files accessible 260by all users on the system should use a more restrictive 261set of permissions such as 700. 262.It Fl n 263Assume a no response to all questions asked by 264.Nm 265except for 266.Ql CONTINUE? , 267which is assumed to be affirmative; 268do not open the file system for writing. 269.It Fl p 270Preen file systems (see above). 271.It Fl R 272Instruct fsck_ffs to restart itself if it encounters certain errors that 273warrant another run. 274It will limit itself to a maximum of 10 restarts in a given run in order 275to avoid an endless loop with extremely corrupted filesystems. 276.It Fl r 277Free up excess unused inodes. 278Decreasing the number of preallocated inodes reduces the 279running time of future runs of 280.Nm 281and frees up space that can allocated to files. 282The 283.Fl r 284option is ignored when running in preen mode. 285.It Fl S 286Surrender on error. 287With this flag enabled, a hard error returned on disk i/o will cause 288.Nm 289to abort instead of continuing on and possibly tripping over more i/o errors. 290.It Fl y 291Assume a yes response to all questions asked by 292.Nm ; 293this should be used with great caution as this is a free license 294to continue after essentially unlimited trouble has been encountered. 295.It Fl Z 296Similar to 297.Fl E , 298but overwrites unused blocks with zeroes. 299If both 300.Fl E 301and 302.Fl Z 303are specified, blocks are first zeroed and then erased. 304.It Fl z 305Clear unused directory space. 306The cleared space includes deleted file names and name padding. 307.El 308.Pp 309Inconsistencies checked are as follows: 310.Pp 311.Bl -enum -compact 312.It 313Blocks claimed by more than one inode or the free map. 314.It 315Blocks claimed by an inode outside the range of the file system. 316.It 317Incorrect link counts. 318.It 319Size checks: 320.Bl -item -offset indent -compact 321.It 322Directory size not a multiple of DIRBLKSIZ. 323.It 324Partially truncated file. 325.El 326.It 327Bad inode format. 328.It 329Blocks not accounted for anywhere. 330.It 331Directory checks: 332.Bl -item -offset indent -compact 333.It 334File pointing to unallocated inode. 335.It 336Inode number out of range. 337.It 338Directories with unallocated blocks (holes). 339.It 340Dot or dot-dot not the first two entries of a directory 341or having the wrong inode number. 342.El 343.It 344Super Block checks: 345.Bl -item -offset indent -compact 346.It 347More blocks for inodes than there are in the file system. 348.It 349Bad free block map format. 350.It 351Total free block and/or free inode count incorrect. 352.El 353.El 354.Pp 355Orphaned files and directories (allocated but unreferenced) are, 356with the operator's concurrence, reconnected by 357placing them in the 358.Pa lost+found 359directory. 360The name assigned is the inode number. 361If the 362.Pa lost+found 363directory does not exist, it is created. 364If there is insufficient space its size is increased. 365.Pp 366The full foreground 367.Nm 368checks for many more problems that may occur after an 369unrecoverable disk write error. 370Thus, it is recommended that you perform foreground 371.Nm 372on your systems periodically and whenever you encounter 373unrecoverable disk write errors or file-system\-related panics. 374.Sh FILES 375.Bl -tag -width /etc/fstab -compact 376.It Pa /etc/fstab 377contains default list of file systems to check. 378.El 379.Sh EXIT STATUS 380.Ex -std 381.Pp 382Specific non-zero exit status values used are: 383.Bl -tag -width indent 384.It 1 385Usage error (missing or invalid command arguments). 386.It 2 387The 388.Fl p 389option was used and a 390.Dv SIGQUIT 391was received, indicating that the system should be returned to single 392user mode after the file system check. 393.It 3 394The file system superblock cannot be read. 395This could indicate that the file system device does not exist or is not yet 396ready. 397.It 4 398A mounted file system was modified; the system should be rebooted. 399.It 5 400The 401.Fl B 402option was used and soft updates are not enabled on the file system. 403.It 6 404The 405.Fl B 406option was used and the kernel lacks needed support. 407.It 7 408The 409.Fl F 410option was used and the file system is clean. 411.It 8 412General error exit. 413.It 16 414The file system could not be completely repaired. 415The file system may be able to be repaired by running 416.Nm 417on the file system again. 418.El 419.Sh DIAGNOSTICS 420The diagnostics produced by 421.Nm 422are fully enumerated and explained in Appendix A of 423.Rs 424.%T "Fsck \- The UNIX File System Check Program" 425.Re 426.Sh SEE ALSO 427.Xr fs 5 , 428.Xr fstab 5 , 429.Xr fsck 8 , 430.Xr fsdb 8 , 431.Xr newfs 8 , 432.Xr reboot 8 433.Sh HISTORY 434A 435.Nm fsck 436utility appeared in 437.Bx 4.0 . 438It became 439.Nm 440in 441.Fx 5.0 442with the introduction of the filesystem independent wrapper as 443.Nm fsck . 444