1.\" Copyright (c) 2011-2012 Stefan Bethke. 2.\" All rights reserved. 3.\" 4.\" Redistribution and use in source and binary forms, with or without 5.\" modification, are permitted provided that the following conditions 6.\" are met: 7.\" 1. Redistributions of source code must retain the above copyright 8.\" notice, this list of conditions and the following disclaimer. 9.\" 2. Redistributions in binary form must reproduce the above copyright 10.\" notice, this list of conditions and the following disclaimer in the 11.\" documentation and/or other materials provided with the distribution. 12.\" 13.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 14.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 15.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 16.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 17.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 18.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 19.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 20.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 21.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 22.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 23.\" SUCH DAMAGE. 24.\" 25.\" $FreeBSD$ 26.\" 27.Dd June 28, 2019 28.Dt ETHERSWITCHCFG 8 29.Os 30.Sh NAME 31.Nm etherswitchcfg 32.Nd configure a built-in Ethernet switch 33.Sh SYNOPSIS 34.Nm 35.Op Fl "f control file" 36.Cm info 37.Nm 38.Op Fl "f control file" 39.Cm config 40.Ar command parameter 41.Nm 42.Op Fl "f control file" 43.Cm phy 44.Ar phy.register[=value] 45.Nm 46.Op Fl "f control file" 47.Cm port%d 48.Ar [flags] command parameter 49.Nm 50.Op Fl "f control file" 51.Cm reg 52.Ar register[=value] 53.Nm 54.Op Fl "f control file" 55.Cm vlangroup%d 56.Ar command parameter 57.Sh DESCRIPTION 58The 59.Nm 60utility is used to configure an Ethernet switch built into the system. 61.Nm 62accepts a number of options: 63.Pp 64.Bl -tag -width ".Fl f" -compact 65.It Fl "f control file" 66Specifies the 67.Xr etherswitch 4 68control file that represents the switch to be configured. 69It defaults to 70.Pa /dev/etherswitch0 . 71.It Fl m 72When reporting port information, also list available media options for 73that port. 74.It Fl v 75Produce more verbose output. 76Without this flag, lines that represent inactive or empty configuration 77options are omitted. 78.El 79.Ss config 80The config command provides access to global switch configuration 81parameters. 82It support the following commands: 83.Pp 84.Bl -tag -width ".Cm vlan_mode mode" -compact 85.It Cm vlan_mode Ar mode 86Sets the switch VLAN mode (depends on the hardware). 87.El 88.Ss phy 89The phy command provides access to the registers of the PHYs attached 90to or integrated into the switch controller. 91PHY registers are specified as phy.register, 92where 93.Ar phy 94is usually the port number, and 95.Ar register 96is the register number. 97Both can be provided as decimal, octal or hexadecimal numbers in any of the formats 98understood by 99.Xr strtol 3 . 100To set the register value, use the form instance.register=value. 101.Ss port 102The port command selects one of the ports of the switch. 103It supports the following commands: 104.Pp 105.Bl -tag -width ".Ar pvid number" -compact 106.It Cm pvid Ar number 107Sets the default port VID that is used to process incoming frames that are not tagged. 108.It Cm media Ar mediaspec 109Specifies the physical media configuration to be configured for a port. 110.It Cm mediaopt Ar mediaoption 111Specifies a list of media options for a port. 112See 113.Xr ifconfig 8 114for details on 115.Cm media 116and 117.Cm mediaopt . 118.It Cm led Ar number style 119Sets the display style for a given LED. 120Available styles are: 121.Cm default 122(usually flash on activity), 123.Cm on , 124.Cm off , 125and 126.Cm blink . 127Not all switches will support all styles. 128.El 129.Pp 130And the following flags (please note that not all flags 131are supported by all switch drivers): 132.Pp 133.Bl -tag -width ".Fl addtag" -compact 134.It Cm addtag 135Add VLAN tag to each packet sent by the port. 136.It Fl addtag 137Disable the add VLAN tag option. 138.It Cm striptag 139Strip the VLAN tags from the packets sent by the port. 140.It Fl striptag 141Disable the strip VLAN tag option. 142.It Cm firstlock 143This options makes the switch port lock on the first MAC address it sees. 144After that, usually you need to reset the switch to learn different 145MAC addresses. 146.It Fl firstlock 147Disable the first lock option. 148Note that sometimes you need to reset the 149switch to really disable this option. 150.It Cm droptagged 151Drop packets with a VLAN tag. 152.It Fl droptagged 153Disable the drop tagged packets option. 154.It Cm dropuntagged 155Drop packets without a VLAN tag. 156.It Fl dropuntagged 157Disable the drop untagged packets option. 158.It Cm doubletag 159Enable QinQ for the port. 160.It Fl doubletag 161Disable QinQ for the port. 162.It Cm ingress 163Enable the ingress filter on the port. 164.It Fl ingress 165Disable the ingress filter. 166.El 167.Ss reg 168The reg command provides access to the registers of the switch controller. 169.Ss vlangroup 170The vlangroup command selects one of the VLAN groups for configuration. 171It supports the following commands: 172.Pp 173.Bl -tag -width ".Cm members" -compact 174.It Cm vlan Ar VID 175Sets the VLAN ID (802.1q VID) for this VLAN group. 176Frames transmitted on tagged member ports of this group will be tagged 177with this VID. 178Incoming frames carrying this tag will be forwarded according to the 179configuration of this VLAN group. 180.It Cm members Ar port,... 181Configures which ports are to be a member of this VLAN group. 182The port numbers are given as a comma-separated list. 183Each port can optionally be followed by 184.Dq t 185to indicate that frames on this port are tagged. 186.El 187.Sh FILES 188.Bl -tag -width /dev/etherswitch? -compact 189.It Pa /dev/etherswitch? 190Control file for the Ethernet switch driver. 191.El 192.Sh EXAMPLES 193Configure VLAN group 1 with a VID of 2 and make ports 0 and 5 its members 194while excluding all other ports. 195Port 5 will send and receive tagged frames while port 0 will be untagged. 196Incoming untagged frames on port 0 are assigned to vlangroup1. 197.Pp 198.Dl # etherswitchcfg vlangroup1 vlan 2 members 0,5t port0 pvid 2 199.Sh SEE ALSO 200.Xr etherswitch 4 201.Sh HISTORY 202.Nm 203first appeared in 204.Fx 10.0 . 205.Sh AUTHORS 206.An Stefan Bethke 207