1 /* $OpenBSD: parse.c,v 1.11 2004/05/05 23:07:47 deraadt Exp $ */ 2 3 /* Common parser code for dhcpd and dhclient. */ 4 5 /*- 6 * SPDX-License-Identifier: BSD-3-Clause 7 * 8 * Copyright (c) 1995, 1996, 1997, 1998 The Internet Software Consortium. 9 * All rights reserved. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 15 * 1. Redistributions of source code must retain the above copyright 16 * notice, this list of conditions and the following disclaimer. 17 * 2. Redistributions in binary form must reproduce the above copyright 18 * notice, this list of conditions and the following disclaimer in the 19 * documentation and/or other materials provided with the distribution. 20 * 3. Neither the name of The Internet Software Consortium nor the names 21 * of its contributors may be used to endorse or promote products derived 22 * from this software without specific prior written permission. 23 * 24 * THIS SOFTWARE IS PROVIDED BY THE INTERNET SOFTWARE CONSORTIUM AND 25 * CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, 26 * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 27 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 28 * DISCLAIMED. IN NO EVENT SHALL THE INTERNET SOFTWARE CONSORTIUM OR 29 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 30 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 31 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF 32 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND 33 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 34 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT 35 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 36 * SUCH DAMAGE. 37 * 38 * This software has been written for the Internet Software Consortium 39 * by Ted Lemon <mellon@fugue.com> in cooperation with Vixie 40 * Enterprises. To learn more about the Internet Software Consortium, 41 * see ``http://www.vix.com/isc''. To learn more about Vixie 42 * Enterprises, see ``http://www.vix.com''. 43 */ 44 45 #include <sys/cdefs.h> 46 __FBSDID("$FreeBSD$"); 47 48 #include <stdbool.h> 49 50 #include "dhcpd.h" 51 #include "dhctoken.h" 52 53 /* Skip to the semicolon ending the current statement. If we encounter 54 * braces, the matching closing brace terminates the statement. If we 55 * encounter a right brace but haven't encountered a left brace, return 56 * leaving the brace in the token buffer for the caller. If we see a 57 * semicolon and haven't seen a left brace, return. This lets us skip 58 * over: 59 * 60 * statement; 61 * statement foo bar { } 62 * statement foo bar { statement { } } 63 * statement} 64 * 65 * ...et cetera. 66 */ 67 void 68 skip_to_semi(FILE *cfile) 69 { 70 int brace_count = 0, token; 71 char *val; 72 73 do { 74 token = peek_token(&val, cfile); 75 if (token == RBRACE) { 76 if (brace_count) { 77 token = next_token(&val, cfile); 78 if (!--brace_count) 79 return; 80 } else 81 return; 82 } else if (token == LBRACE) { 83 brace_count++; 84 } else if (token == SEMI && !brace_count) { 85 token = next_token(&val, cfile); 86 return; 87 } else if (token == '\n') { 88 /* 89 * EOL only happens when parsing 90 * /etc/resolv.conf, and we treat it like a 91 * semicolon because the resolv.conf file is 92 * line-oriented. 93 */ 94 token = next_token(&val, cfile); 95 return; 96 } 97 token = next_token(&val, cfile); 98 } while (token != EOF); 99 } 100 101 int 102 parse_semi(FILE *cfile) 103 { 104 int token; 105 char *val; 106 107 token = next_token(&val, cfile); 108 if (token != SEMI) { 109 parse_warn("semicolon expected."); 110 skip_to_semi(cfile); 111 return (0); 112 } 113 return (1); 114 } 115 116 /* 117 * string-parameter :== STRING SEMI 118 */ 119 char * 120 parse_string(FILE *cfile) 121 { 122 char *val, *s; 123 size_t valsize; 124 int token; 125 126 token = next_token(&val, cfile); 127 if (token != STRING) { 128 parse_warn("filename must be a string"); 129 skip_to_semi(cfile); 130 return (NULL); 131 } 132 valsize = strlen(val) + 1; 133 s = malloc(valsize); 134 if (!s) 135 error("no memory for string %s.", val); 136 memcpy(s, val, valsize); 137 138 if (!parse_semi(cfile)) { 139 free(s); 140 return (NULL); 141 } 142 return (s); 143 } 144 145 int 146 parse_ip_addr(FILE *cfile, struct iaddr *addr) 147 { 148 addr->len = 4; 149 if (parse_numeric_aggregate(cfile, addr->iabuf, 150 &addr->len, DOT, 10, 8)) 151 return (1); 152 return (0); 153 } 154 155 /* 156 * hardware-parameter :== HARDWARE ETHERNET csns SEMI 157 * csns :== NUMBER | csns COLON NUMBER 158 */ 159 void 160 parse_hardware_param(FILE *cfile, struct hardware *hardware) 161 { 162 unsigned char *t; 163 int token; 164 size_t hlen; 165 char *val; 166 167 token = next_token(&val, cfile); 168 switch (token) { 169 case ETHERNET: 170 hardware->htype = HTYPE_ETHER; 171 break; 172 case TOKEN_RING: 173 hardware->htype = HTYPE_IEEE802; 174 break; 175 case FDDI: 176 hardware->htype = HTYPE_FDDI; 177 break; 178 default: 179 parse_warn("expecting a network hardware type"); 180 skip_to_semi(cfile); 181 return; 182 } 183 184 /* 185 * Parse the hardware address information. Technically, it 186 * would make a lot of sense to restrict the length of the data 187 * we'll accept here to the length of a particular hardware 188 * address type. Unfortunately, there are some broken clients 189 * out there that put bogus data in the chaddr buffer, and we 190 * accept that data in the lease file rather than simply failing 191 * on such clients. Yuck. 192 */ 193 hlen = 0; 194 t = parse_numeric_aggregate(cfile, NULL, &hlen, COLON, 16, 8); 195 if (!t) 196 return; 197 if (hlen > sizeof(hardware->haddr)) { 198 free(t); 199 parse_warn("hardware address too long"); 200 } else { 201 hardware->hlen = hlen; 202 memcpy((unsigned char *)&hardware->haddr[0], t, 203 hardware->hlen); 204 if (hlen < sizeof(hardware->haddr)) 205 memset(&hardware->haddr[hlen], 0, 206 sizeof(hardware->haddr) - hlen); 207 free(t); 208 } 209 210 token = next_token(&val, cfile); 211 if (token != SEMI) { 212 parse_warn("expecting semicolon."); 213 skip_to_semi(cfile); 214 } 215 } 216 217 /* 218 * lease-time :== NUMBER SEMI 219 */ 220 void 221 parse_lease_time(FILE *cfile, time_t *timep) 222 { 223 char *val; 224 int token; 225 226 token = next_token(&val, cfile); 227 if (token != NUMBER) { 228 parse_warn("Expecting numeric lease time"); 229 skip_to_semi(cfile); 230 return; 231 } 232 convert_num((unsigned char *)timep, val, 10, 32); 233 /* Unswap the number - convert_num returns stuff in NBO. */ 234 *timep = ntohl(*timep); /* XXX */ 235 236 parse_semi(cfile); 237 } 238 239 /* 240 * No BNF for numeric aggregates - that's defined by the caller. What 241 * this function does is to parse a sequence of numbers separated by the 242 * token specified in separator. If max is zero, any number of numbers 243 * will be parsed; otherwise, exactly max numbers are expected. Base 244 * and size tell us how to internalize the numbers once they've been 245 * tokenized. 246 */ 247 unsigned char * 248 parse_numeric_aggregate(FILE *cfile, unsigned char *buf, size_t *max, 249 int separator, unsigned base, int size) 250 { 251 unsigned char *bufp = buf, *s = NULL; 252 int token; 253 char *val, *t; 254 size_t valsize, count = 0; 255 pair c = NULL; 256 unsigned char *lbufp = NULL; 257 258 if (!bufp && *max) { 259 lbufp = bufp = malloc(*max * size / 8); 260 if (!bufp) 261 error("can't allocate space for numeric aggregate"); 262 } else 263 s = bufp; 264 265 do { 266 if (count) { 267 token = peek_token(&val, cfile); 268 if (token != separator) { 269 if (!*max) 270 break; 271 if (token != RBRACE && token != LBRACE) 272 token = next_token(&val, cfile); 273 parse_warn("too few numbers."); 274 if (token != SEMI) 275 skip_to_semi(cfile); 276 free(lbufp); 277 return (NULL); 278 } 279 token = next_token(&val, cfile); 280 } 281 token = next_token(&val, cfile); 282 283 if (token == EOF) { 284 parse_warn("unexpected end of file"); 285 break; 286 } 287 288 /* Allow NUMBER_OR_NAME if base is 16. */ 289 if (token != NUMBER && 290 (base != 16 || token != NUMBER_OR_NAME)) { 291 parse_warn("expecting numeric value."); 292 skip_to_semi(cfile); 293 free(lbufp); 294 return (NULL); 295 } 296 /* 297 * If we can, convert the number now; otherwise, build a 298 * linked list of all the numbers. 299 */ 300 if (s) { 301 convert_num(s, val, base, size); 302 s += size / 8; 303 } else { 304 valsize = strlen(val) + 1; 305 t = malloc(valsize); 306 if (!t) 307 error("no temp space for number."); 308 memcpy(t, val, valsize); 309 c = cons(t, c); 310 } 311 } while (++count != *max); 312 313 /* If we had to cons up a list, convert it now. */ 314 if (c) { 315 free(lbufp); 316 bufp = malloc(count * size / 8); 317 if (!bufp) 318 error("can't allocate space for numeric aggregate."); 319 s = bufp + count - size / 8; 320 *max = count; 321 } 322 while (c) { 323 pair cdr = c->cdr; 324 convert_num(s, (char *)c->car, base, size); 325 s -= size / 8; 326 /* Free up temp space. */ 327 free(c->car); 328 free(c); 329 c = cdr; 330 } 331 return (bufp); 332 } 333 334 void 335 convert_num(unsigned char *buf, char *str, unsigned base, int size) 336 { 337 bool negative = false; 338 unsigned tval, max; 339 u_int32_t val = 0; 340 char *ptr = str; 341 342 if (*ptr == '-') { 343 negative = true; 344 ptr++; 345 } 346 347 /* If base wasn't specified, figure it out from the data. */ 348 if (!base) { 349 if (ptr[0] == '0') { 350 if (ptr[1] == 'x') { 351 base = 16; 352 ptr += 2; 353 } else if (isascii(ptr[1]) && isdigit(ptr[1])) { 354 base = 8; 355 ptr += 1; 356 } else 357 base = 10; 358 } else 359 base = 10; 360 } 361 362 do { 363 tval = *ptr++; 364 /* XXX assumes ASCII... */ 365 if (tval >= 'a') 366 tval = tval - 'a' + 10; 367 else if (tval >= 'A') 368 tval = tval - 'A' + 10; 369 else if (tval >= '0') 370 tval -= '0'; 371 else { 372 warning("Bogus number: %s.", str); 373 break; 374 } 375 if (tval >= base) { 376 warning("Bogus number: %s: digit %d not in base %d", 377 str, tval, base); 378 break; 379 } 380 val = val * base + tval; 381 } while (*ptr); 382 383 if (negative) 384 max = (1 << (size - 1)); 385 else 386 max = (1 << (size - 1)) + ((1 << (size - 1)) - 1); 387 if (val > max) { 388 switch (base) { 389 case 8: 390 warning("value %s%o exceeds max (%d) for precision.", 391 negative ? "-" : "", val, max); 392 break; 393 case 16: 394 warning("value %s%x exceeds max (%d) for precision.", 395 negative ? "-" : "", val, max); 396 break; 397 default: 398 warning("value %s%u exceeds max (%d) for precision.", 399 negative ? "-" : "", val, max); 400 break; 401 } 402 } 403 404 if (negative) 405 switch (size) { 406 case 8: 407 *buf = -(unsigned long)val; 408 break; 409 case 16: 410 putShort(buf, -(unsigned long)val); 411 break; 412 case 32: 413 putLong(buf, -(unsigned long)val); 414 break; 415 default: 416 warning("Unexpected integer size: %d", size); 417 break; 418 } 419 else 420 switch (size) { 421 case 8: 422 *buf = (u_int8_t)val; 423 break; 424 case 16: 425 putUShort(buf, (u_int16_t)val); 426 break; 427 case 32: 428 putULong(buf, val); 429 break; 430 default: 431 warning("Unexpected integer size: %d", size); 432 break; 433 } 434 } 435 436 /* 437 * date :== NUMBER NUMBER SLASH NUMBER SLASH NUMBER 438 * NUMBER COLON NUMBER COLON NUMBER SEMI 439 * 440 * Dates are always in GMT; first number is day of week; next is 441 * year/month/day; next is hours:minutes:seconds on a 24-hour 442 * clock. 443 */ 444 time_t 445 parse_date(FILE *cfile) 446 { 447 int token; 448 struct tm tm; 449 char *val; 450 451 /* Day of week... */ 452 token = next_token(&val, cfile); 453 if (token != NUMBER) { 454 parse_warn("numeric day of week expected."); 455 if (token != SEMI) 456 skip_to_semi(cfile); 457 return (0); 458 } 459 tm.tm_wday = atoi(val); 460 461 /* Year... */ 462 token = next_token(&val, cfile); 463 if (token != NUMBER) { 464 parse_warn("numeric year expected."); 465 if (token != SEMI) 466 skip_to_semi(cfile); 467 return (0); 468 } 469 tm.tm_year = atoi(val); 470 if (tm.tm_year > 1900) 471 tm.tm_year -= 1900; 472 473 /* Slash separating year from month... */ 474 token = next_token(&val, cfile); 475 if (token != SLASH) { 476 parse_warn("expected slash separating year from month."); 477 if (token != SEMI) 478 skip_to_semi(cfile); 479 return (0); 480 } 481 482 /* Month... */ 483 token = next_token(&val, cfile); 484 if (token != NUMBER) { 485 parse_warn("numeric month expected."); 486 if (token != SEMI) 487 skip_to_semi(cfile); 488 return (0); 489 } 490 tm.tm_mon = atoi(val) - 1; 491 492 /* Slash separating month from day... */ 493 token = next_token(&val, cfile); 494 if (token != SLASH) { 495 parse_warn("expected slash separating month from day."); 496 if (token != SEMI) 497 skip_to_semi(cfile); 498 return (0); 499 } 500 501 /* Month... */ 502 token = next_token(&val, cfile); 503 if (token != NUMBER) { 504 parse_warn("numeric day of month expected."); 505 if (token != SEMI) 506 skip_to_semi(cfile); 507 return (0); 508 } 509 tm.tm_mday = atoi(val); 510 511 /* Hour... */ 512 token = next_token(&val, cfile); 513 if (token != NUMBER) { 514 parse_warn("numeric hour expected."); 515 if (token != SEMI) 516 skip_to_semi(cfile); 517 return (0); 518 } 519 tm.tm_hour = atoi(val); 520 521 /* Colon separating hour from minute... */ 522 token = next_token(&val, cfile); 523 if (token != COLON) { 524 parse_warn("expected colon separating hour from minute."); 525 if (token != SEMI) 526 skip_to_semi(cfile); 527 return (0); 528 } 529 530 /* Minute... */ 531 token = next_token(&val, cfile); 532 if (token != NUMBER) { 533 parse_warn("numeric minute expected."); 534 if (token != SEMI) 535 skip_to_semi(cfile); 536 return (0); 537 } 538 tm.tm_min = atoi(val); 539 540 /* Colon separating minute from second... */ 541 token = next_token(&val, cfile); 542 if (token != COLON) { 543 parse_warn("expected colon separating hour from minute."); 544 if (token != SEMI) 545 skip_to_semi(cfile); 546 return (0); 547 } 548 549 /* Minute... */ 550 token = next_token(&val, cfile); 551 if (token != NUMBER) { 552 parse_warn("numeric minute expected."); 553 if (token != SEMI) 554 skip_to_semi(cfile); 555 return (0); 556 } 557 tm.tm_sec = atoi(val); 558 tm.tm_isdst = 0; 559 560 /* XXX: We assume that mktime does not use tm_yday. */ 561 tm.tm_yday = 0; 562 563 /* Make sure the date ends in a semicolon... */ 564 token = next_token(&val, cfile); 565 if (token != SEMI) { 566 parse_warn("semicolon expected."); 567 skip_to_semi(cfile); 568 return (0); 569 } 570 571 return (timegm(&tm)); 572 } 573