xref: /freebsd/sbin/ccdconfig/ccdconfig.8 (revision 251c176f415c9dc57b7c8c063aec4208bfc2efa6)

.\"	$NetBSD: ccdconfig.8,v 1.1.2.1 1995/11/11 02:43:33 thorpej Exp $
.\"
.\" Copyright (c) 1995 Jason R. Thorpe.
.\" All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\"    notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\"    notice, this list of conditions and the following disclaimer in the
.\"    documentation and/or other materials provided with the distribution.
.\" 3. All advertising materials mentioning features or use of this software
.\"    must display the following acknowledgment:
.\"	This product includes software developed for the NetBSD Project
.\"	by Jason R. Thorpe.
.\" 4. The name of the author may not be used to endorse or promote products
.\"    derived from this software without specific prior written permission.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
.\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
.\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
.\" IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
.\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
.\" BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
.\" LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
.\" AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
.\" OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
.\"
.\" $FreeBSD$
.\"
.Dd July 17, 1995
.Dt CCDCONFIG 8
.Os FreeBSD
.Sh NAME
.Nm ccdconfig
.Nd configuration utility for the concatenated disk driver
.Sh SYNOPSIS
.Nm ccdconfig
.Op Fl cv
.Ar ccd
.Ar ileave
.Op Ar flags
.Ar dev
.Op Ar
.Nm ccdconfig
.Fl C
.Op Fl v
.Op Fl f Ar config_file
.Nm ccdconfig
.Fl u
.Op Fl v
.Ar ccd
.Op Ar
.Nm ccdconfig
.Fl U
.Op Fl v
.Op Fl f Ar config_file
.Nm ccdconfig
.Fl g
.Op Fl M Ar core
.Op Fl N Ar system
.Oo
.Ar ccd Oo ...
.Oc
.Oc
.Sh DESCRIPTION
.Nm Ccdconfig
is used to dynamically configure and unconfigure concatenated disk
devices, or ccds.  For more information about the ccd, see
.Xr ccd 4 .
.Pp
The options are as follows:
.Bl -tag -width indent
.It Fl c
Configure a ccd.  This is the default behavior of
.Nm Ns .
.It Fl C
Configure all ccd devices listed in the ccd configuration file.
.It Fl f Ar config_file
When configuring or unconfiguring all devices, read the file
.Pa config_file
instead of the default
.Pa /etc/ccd.conf .
.It Fl g
Dump the current ccd configuration in a format suitable for use as the
ccd configuration file.  If no arguments are specified, every configured
ccd is dumped.  Otherwise, the configuration of each listed ccd is dumped.
.It Fl M Ar core
Extract values associated with the name list from
.Pa core
instead of the default
.Pa /dev/mem .
.It Fl N Ar system
Use
.Ar system
as the kernel instead of the running kernel (as determined from
.Xr getbootfile 3 ).
.It Fl u
Unconfigure a ccd.
.It Fl U
Unconfigure all ccd devices listed the ccd configuration file.
.It Fl v
Cause
.Nm
to be verbose.
.El
.Pp
A ccd is described on the command line and in the ccd configuration
file by the name of the ccd, the interleave factor, the ccd configuration
flags, and a list of one or more devices.  The flags may be represented
as a decimal number, a hexadecimal number, a comma-separated list
of strings, or the word
.Dq none .
The flags are as follows:
.Bd -unfilled -offset indent
CCDF_SWAP		0x01		Interleave should be dmmax
CCDF_UNIFORM	0x02		Use uniform interleave
CCDF_MIRROR	0x04		Support mirroring
CCDF_PARITY	0x08		Support parity (not implemented yet)
.Ed
.Pp
The format in the
configuration file appears exactly as if it were entered on the command line.
Note that on the command line and in the configuration file, the
.Pa flags
argument is optional.
.Bd -unfilled -offset indent
#
# /etc/ccd.conf
# Configuration file for concatenated disk devices
#
.Pp
# ccd           ileave  flags   component devices
ccd0            16      none    /dev/da2e /dev/da3e
.Ed
.Pp
The component devices need to name partitions of type
.Li FS_BSDFFS
(or
.Dq 4.2BSD
as shown by
.Xr disklabel 8 ).
.Sh EXAMPLES
.Pp
A number of ccdconfig examples are shown below.  The arguments passed
to ccdconfig are exactly the same as you might place in the
.Pa /etc/ccd.conf
configuration file.  The first example creates a 4-disk stripe out of
four scsi disk partitions.  The stripe uses a 64 sector interleave.
The second example is an example of a complex stripe/mirror combination.
It reads as a two disk stripe of da2e and da3e which is mirrored
to a two disk stripe of da4e and da5e.  The last example is a simple
mirror.  /dev/da2e is mirrored with /dev/da4e and assigned to ccd0.
.Pp
.Bd -unfilled -offset
# ccdconfig ccd0 64 none /dev/da2e /dev/da3e /dev/da4e /dev/da5e
# ccdconfig ccd0 128 CCDF_MIRROR /dev/da2e /dev/da3e /dev/da4e /dev/da5e
# ccdconfig ccd0 128 CCDF_MIRROR /dev/da2e /dev/da4e
.Ed
.Pp
When you create a new ccd disk you generally want to
.Nm disklabel
it before doing anything else.  Once you create the initial label you can
edit it, adding additional partitions.  The label itself takes up the first
16 sectors of the ccd disk.  If all you are doing is creating filesystems
with newfs, you do not have to worry about this as newfs will skip the
label area.  However, if you intend to
.Nm dd
to or from a ccd partition it is usually a good idea to construct the
partition such that it does not overlap the label area.  For example, if
you have A ccd disk with 10000 sectors you might create a 'd' partition
with offset 16 and size 9984.
.Pp
.Bd -unfilled -offset
# disklabel -r -w ccd0c auto
# disklabel -e ccd0c
.Ed
.Pp
The disklabeling of a ccd disk is usually a one-time affair.  Unlike other
devices, ccd currently requires that you specify partition 'c' when
running disklabel.  If you reboot the machine and reconfigure the ccd disk,
the disklabel you
had created before will still be there and not require reinitialization.
Beware that changing any ccd parameters: interleave, flags, or the
device list making up the ccd disk, will usually destroy any prior
data on that ccd disk.  If this occurs it is usually a good idea to
reinitialize the label before [re]constructing your ccd disk.
.Pp
.Sh RECOVERY
.Pp
An error on a ccd disk is usually unrecoverable unless you are using the
mirroring option.  But mirroring has its own perils:  It assumes that
both copies of the data at any given sector are the same.  This holds true
until a write error occurs or until you replace either side of the mirror.
.Nm Ccd
uses a poor-man's mirroring implementation.  It works well enough that if
you begin to get disk errors you should be able to backup the ccd disk,
replace the broken hardware, and then regenerate the ccd disk.  If you need
more then this you should look into external hardware RAID SCSI boxes,
RAID controllers such as the
.Nm dpt
controller, or software RAID systems such as
.Nm vinum .
.Pp
.Sh FILES
.Bl -tag -width /etc/ccd.conf -compact
.It Pa /etc/ccd.conf
default ccd configuration file
.El
.Sh SEE ALSO
.Xr ccd 4 ,
.Xr rc 8
.Xr vinum 8
.Sh HISTORY
The
.Nm
command first appeared in
.Nx 1.0a .