1# $NetBSD: rc.subr,v 1.67 2006/10/07 11:25:15 elad Exp $ 2# $FreeBSD$ 3# 4# Copyright (c) 1997-2004 The NetBSD Foundation, Inc. 5# All rights reserved. 6# 7# This code is derived from software contributed to The NetBSD Foundation 8# by Luke Mewburn. 9# 10# Redistribution and use in source and binary forms, with or without 11# modification, are permitted provided that the following conditions 12# are met: 13# 1. Redistributions of source code must retain the above copyright 14# notice, this list of conditions and the following disclaimer. 15# 2. Redistributions in binary form must reproduce the above copyright 16# notice, this list of conditions and the following disclaimer in the 17# documentation and/or other materials provided with the distribution. 18# 19# THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 20# ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 21# TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 22# PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 23# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 24# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 25# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 26# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 27# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 28# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 29# POSSIBILITY OF SUCH DAMAGE. 30# 31# rc.subr 32# functions used by various rc scripts 33# 34 35: ${RC_PID:=$$}; export RC_PID 36 37# 38# Operating System dependent/independent variables 39# 40 41if [ -n "${_rc_subr_loaded}" ]; then 42 return 43fi 44 45_rc_subr_loaded="YES" 46 47SYSCTL="/sbin/sysctl" 48SYSCTL_N="${SYSCTL} -n" 49SYSCTL_W="${SYSCTL}" 50PROTECT="/usr/bin/protect" 51ID="/usr/bin/id" 52IDCMD="if [ -x $ID ]; then $ID -un; fi" 53PS="/bin/ps -ww" 54JID=0 55# rc_service provides the path to the service script that we are executing. 56# This is not being set here in an execution context, necessarily, so it's 57# really just a reasonable guess, and it will get overwritten later if 58# we are executing from some other means than direct execution by service(8) 59# or manual invocation of the service script. The prime example of this is 60# during system startup, all rc scripts will be invoked via /etc/rc, so 61# run_rc_script will overwrite rc_service with the file being sourced. 62rc_service="$0" 63 64# 65# functions 66# --------- 67 68# list_vars pattern 69# List variables matching glob pattern. 70# 71list_vars() 72{ 73 # Localize 'set' option below. 74 local - 75 local IFS=$'\n' line varname 76 77 # Disable path expansion in unquoted 'for' parameters below. 78 set -o noglob 79 80 for line in $(set); do 81 varname="${line%%=*}" 82 83 case "$varname" in 84 "$line"|*[!a-zA-Z0-9_]*) 85 continue 86 ;; 87 $1) 88 echo $varname 89 ;; 90 esac 91 done 92} 93 94# set_rcvar [var] [defval] [desc] 95# 96# Echo or define a rc.conf(5) variable name. Global variable 97# $rcvars is used. 98# 99# If no argument is specified, echo "${name}_enable". 100# 101# If only a var is specified, echo "${var}_enable". 102# 103# If var and defval are specified, the ${var} is defined as 104# rc.conf(5) variable and the default value is ${defvar}. An 105# optional argument $desc can also be specified to add a 106# description for that. 107# 108set_rcvar() 109{ 110 local _var 111 112 case $# in 113 0) echo ${name}_enable ;; 114 1) echo ${1}_enable ;; 115 *) 116 debug "set_rcvar: \$$1=$2 is added" \ 117 " as a rc.conf(5) variable." 118 _var=$1 119 rcvars="${rcvars# } $_var" 120 eval ${_var}_defval=\"$2\" 121 shift 2 122 eval ${_var}_desc=\"$*\" 123 ;; 124 esac 125} 126 127# set_rcvar_obsolete oldvar [newvar] [msg] 128# Define obsolete variable. 129# Global variable $rcvars_obsolete is used. 130# 131set_rcvar_obsolete() 132{ 133 local _var 134 _var=$1 135 debug "set_rcvar_obsolete: \$$1(old) -> \$$2(new) is defined" 136 137 rcvars_obsolete="${rcvars_obsolete# } $1" 138 eval ${1}_newvar=\"$2\" 139 shift 2 140 eval ${_var}_obsolete_msg=\"$*\" 141} 142 143# 144# force_depend script [rcvar] 145# Force a service to start. Intended for use by services 146# to resolve dependency issues. 147# $1 - filename of script, in /etc/rc.d, to run 148# $2 - name of the script's rcvar (minus the _enable) 149# 150force_depend() 151{ 152 local _depend _dep_rcvar 153 154 _depend="$1" 155 _dep_rcvar="${2:-$1}_enable" 156 157 [ -n "$rc_fast" ] && ! checkyesno always_force_depends && 158 checkyesno $_dep_rcvar && return 0 159 160 /etc/rc.d/${_depend} forcestatus >/dev/null 2>&1 && return 0 161 162 info "${name} depends on ${_depend}, which will be forced to start." 163 if ! /etc/rc.d/${_depend} forcestart; then 164 warn "Unable to force ${_depend}. It may already be running." 165 return 1 166 fi 167} 168 169# 170# checkyesno var 171# Test $1 variable, and warn if not set to YES or NO. 172# Return 0 if it's "yes" (et al), nonzero otherwise. 173# 174checkyesno() 175{ 176 eval _value=\$${1} 177 debug "checkyesno: $1 is set to $_value." 178 case $_value in 179 180 # "yes", "true", "on", or "1" 181 [Yy][Ee][Ss]|[Tt][Rr][Uu][Ee]|[Oo][Nn]|1) 182 return 0 183 ;; 184 185 # "no", "false", "off", or "0" 186 [Nn][Oo]|[Ff][Aa][Ll][Ss][Ee]|[Oo][Ff][Ff]|0) 187 return 1 188 ;; 189 *) 190 warn "\$${1} is not set properly - see rc.conf(5)." 191 return 1 192 ;; 193 esac 194} 195 196# 197# reverse_list list 198# print the list in reverse order 199# 200reverse_list() 201{ 202 _revlist= 203 for _revfile; do 204 _revlist="$_revfile $_revlist" 205 done 206 echo $_revlist 207} 208 209# stop_boot always 210# If booting directly to multiuser or $always is enabled, 211# send SIGTERM to the parent (/etc/rc) to abort the boot. 212# Otherwise just exit. 213# 214stop_boot() 215{ 216 local always 217 218 case $1 in 219 # "yes", "true", "on", or "1" 220 [Yy][Ee][Ss]|[Tt][Rr][Uu][Ee]|[Oo][Nn]|1) 221 always=true 222 ;; 223 *) 224 always=false 225 ;; 226 esac 227 if [ "$autoboot" = yes -o "$always" = true ]; then 228 echo "ERROR: ABORTING BOOT (sending SIGTERM to parent)!" 229 kill -TERM ${RC_PID} 230 fi 231 exit 1 232} 233 234# 235# mount_critical_filesystems type 236# Go through the list of critical filesystems as provided in 237# the rc.conf(5) variable $critical_filesystems_${type}, checking 238# each one to see if it is mounted, and if it is not, mounting it. 239# 240mount_critical_filesystems() 241{ 242 eval _fslist=\$critical_filesystems_${1} 243 for _fs in $_fslist; do 244 mount | ( 245 _ismounted=false 246 while read what _on on _type type; do 247 if [ $on = $_fs ]; then 248 _ismounted=true 249 fi 250 done 251 if $_ismounted; then 252 : 253 else 254 mount $_fs >/dev/null 2>&1 255 fi 256 ) 257 done 258} 259 260# 261# check_pidfile pidfile procname [interpreter] 262# Parses the first line of pidfile for a PID, and ensures 263# that the process is running and matches procname. 264# Prints the matching PID upon success, nothing otherwise. 265# interpreter is optional; see _find_processes() for details. 266# 267check_pidfile() 268{ 269 _pidfile=$1 270 _procname=$2 271 _interpreter=$3 272 if [ -z "$_pidfile" -o -z "$_procname" ]; then 273 err 3 'USAGE: check_pidfile pidfile procname [interpreter]' 274 fi 275 if [ ! -f $_pidfile ]; then 276 debug "pid file ($_pidfile): not readable." 277 return 278 fi 279 read _pid _junk < $_pidfile 280 if [ -z "$_pid" ]; then 281 debug "pid file ($_pidfile): no pid in file." 282 return 283 fi 284 _find_processes $_procname ${_interpreter:-.} '-p '"$_pid" 285} 286 287# 288# check_process procname [interpreter] 289# Ensures that a process (or processes) named procname is running. 290# Prints a list of matching PIDs. 291# interpreter is optional; see _find_processes() for details. 292# 293check_process() 294{ 295 _procname=$1 296 _interpreter=$2 297 if [ -z "$_procname" ]; then 298 err 3 'USAGE: check_process procname [interpreter]' 299 fi 300 _find_processes $_procname ${_interpreter:-.} '-ax' 301} 302 303# 304# _find_processes procname interpreter psargs 305# Search for procname in the output of ps generated by psargs. 306# Prints the PIDs of any matching processes, space separated. 307# 308# If interpreter == ".", check the following variations of procname 309# against the first word of each command: 310# procname 311# `basename procname` 312# `basename procname` + ":" 313# "(" + `basename procname` + ")" 314# "[" + `basename procname` + "]" 315# 316# If interpreter != ".", read the first line of procname, remove the 317# leading #!, normalise whitespace, append procname, and attempt to 318# match that against each command, either as is, or with extra words 319# at the end. As an alternative, to deal with interpreted daemons 320# using perl, the basename of the interpreter plus a colon is also 321# tried as the prefix to procname. 322# 323_find_processes() 324{ 325 if [ $# -ne 3 ]; then 326 err 3 'USAGE: _find_processes procname interpreter psargs' 327 fi 328 _procname=$1 329 _interpreter=$2 330 _psargs=$3 331 332 _pref= 333 if [ $_interpreter != "." ]; then # an interpreted script 334 _script="${_chroot}${_chroot:+/}$_procname" 335 if [ -r "$_script" ]; then 336 read _interp < $_script # read interpreter name 337 case "$_interp" in 338 \#!*) 339 _interp=${_interp#\#!} # strip #! 340 set -- $_interp 341 case $1 in 342 */bin/env) 343 shift # drop env to get real name 344 ;; 345 esac 346 if [ $_interpreter != $1 ]; then 347 warn "\$command_interpreter $_interpreter != $1" 348 fi 349 ;; 350 *) 351 warn "no shebang line in $_script" 352 set -- $_interpreter 353 ;; 354 esac 355 else 356 warn "cannot read shebang line from $_script" 357 set -- $_interpreter 358 fi 359 _interp="$* $_procname" # cleanup spaces, add _procname 360 _interpbn=${1##*/} 361 _fp_args='_argv' 362 _fp_match='case "$_argv" in 363 ${_interp}|"${_interp} "*|"[${_interpbn}]"|"${_interpbn}: ${_procname}"*)' 364 else # a normal daemon 365 _procnamebn=${_procname##*/} 366 _fp_args='_arg0 _argv' 367 _fp_match='case "$_arg0" in 368 $_procname|$_procnamebn|${_procnamebn}:|"(${_procnamebn})"|"[${_procnamebn}]")' 369 fi 370 371 _proccheck="\ 372 $PS 2>/dev/null -o pid= -o jid= -o command= $_psargs"' | 373 while read _npid _jid '"$_fp_args"'; do 374 '"$_fp_match"' 375 if [ "$JID" -eq "$_jid" ]; 376 then echo -n "$_pref$_npid"; 377 _pref=" "; 378 fi 379 ;; 380 esac 381 done' 382 383# debug "in _find_processes: proccheck is ($_proccheck)." 384 eval $_proccheck 385} 386 387# sort_lite [-b] [-n] [-k POS] [-t SEP] 388# A lite version of sort(1) (supporting a few options) that can be used 389# before the real sort(1) is available (e.g., in scripts that run prior 390# to mountcritremote). Requires only shell built-in functionality. 391# 392sort_lite() 393{ 394 local funcname=sort_lite 395 local sort_sep="$IFS" sort_ignore_leading_space= 396 local sort_field=0 sort_strict_fields= sort_numeric= 397 local nitems=0 skip_leading=0 trim= 398 399 local OPTIND flag 400 while getopts bnk:t: flag; do 401 case "$flag" in 402 b) sort_ignore_leading_space=1 ;; 403 n) sort_numeric=1 sort_ignore_leading_space=1 ;; 404 k) sort_field="${OPTARG%%,*}" ;; # only up to first comma 405 # NB: Unlike sort(1) only one POS allowed 406 t) sort_sep="$OPTARG" 407 if [ ${#sort_sep} -gt 1 ]; then 408 echo "$funcname: multi-character tab \`$sort_sep'" >&2 409 return 1 410 fi 411 sort_strict_fields=1 412 ;; 413 \?) return 1 ;; 414 esac 415 done 416 shift $(( $OPTIND - 1 )) 417 418 # Create transformation pattern to trim leading text if desired 419 case "$sort_field" in 420 ""|[!0-9]*|*[!0-9.]*) 421 echo "$funcname: invalid sort field \`$sort_field'" >&2 422 return 1 423 ;; 424 *.*) 425 skip_leading=${sort_field#*.} sort_field=${sort_field%%.*} 426 while [ ${skip_leading:-0} -gt 1 ] 2> /dev/null; do 427 trim="$trim?" skip_leading=$(( $skip_leading - 1 )) 428 done 429 esac 430 431 # Copy input to series of local numbered variables 432 # NB: IFS of NULL preserves leading whitespace 433 local LINE 434 while IFS= read -r LINE || [ "$LINE" ]; do 435 nitems=$(( $nitems + 1 )) 436 local src_$nitems="$LINE" 437 done 438 439 # 440 # Sort numbered locals using insertion sort 441 # 442 local curitem curitem_orig curitem_mod curitem_haskey 443 local dest dest_orig dest_mod dest_haskey 444 local d gt n 445 local i=1 446 while [ $i -le $nitems ]; do 447 curitem_haskey=1 # Assume sort field (-k POS) exists 448 eval curitem=\"\$src_$i\" 449 curitem_mod="$curitem" # for modified comparison 450 curitem_orig="$curitem" # for original comparison 451 452 # Trim leading whitespace if desired 453 if [ "$sort_ignore_leading_space" ]; then 454 while case "$curitem_orig" in 455 [$IFS]*) : ;; *) false; esac 456 do 457 curitem_orig="${curitem_orig#?}" 458 done 459 curitem_mod="$curitem_orig" 460 fi 461 462 # Shift modified comparison value if sort field (-k POS) is > 1 463 n=$sort_field 464 while [ $n -gt 1 ]; do 465 case "$curitem_mod" in 466 *[$sort_sep]*) 467 # Cut text up-to (and incl.) first separator 468 curitem_mod="${curitem_mod#*[$sort_sep]}" 469 470 # Skip NULLs unless strict field splitting 471 [ "$sort_strict_fields" ] || 472 [ "${curitem_mod%%[$sort_sep]*}" ] || 473 [ $n -eq 2 ] || 474 continue 475 ;; 476 *) 477 # Asked for a field that doesn't exist 478 curitem_haskey= break 479 esac 480 n=$(( $n - 1 )) 481 done 482 483 # Trim trailing words if sort field >= 1 484 [ $sort_field -ge 1 -a "$sort_numeric" ] && 485 curitem_mod="${curitem_mod%%[$sort_sep]*}" 486 487 # Apply optional trim (-k POS.TRIM) to cut leading characters 488 curitem_mod="${curitem_mod#$trim}" 489 490 # Determine the type of modified comparison to use initially 491 # NB: Prefer numerical if requested but fallback to standard 492 case "$curitem_mod" in 493 ""|[!0-9]*) # NULL or begins with non-number 494 gt=">" 495 [ "$sort_numeric" ] && curitem_mod=0 496 ;; 497 *) 498 if [ "$sort_numeric" ]; then 499 gt="-gt" 500 curitem_mod="${curitem_mod%%[!0-9]*}" 501 # NB: trailing non-digits removed 502 # otherwise numeric comparison fails 503 else 504 gt=">" 505 fi 506 esac 507 508 # If first time through, short-circuit below position-search 509 if [ $i -le 1 ]; then 510 d=0 511 else 512 d=1 513 fi 514 515 # 516 # Find appropriate element position 517 # 518 while [ $d -gt 0 ] 519 do 520 dest_haskey=$curitem_haskey 521 eval dest=\"\$dest_$d\" 522 dest_mod="$dest" # for modified comparison 523 dest_orig="$dest" # for original comparison 524 525 # Trim leading whitespace if desired 526 if [ "$sort_ignore_leading_space" ]; then 527 while case "$dest_orig" in 528 [$IFS]*) : ;; *) false; esac 529 do 530 dest_orig="${dest_orig#?}" 531 done 532 dest_mod="$dest_orig" 533 fi 534 535 # Shift modified value if sort field (-k POS) is > 1 536 n=$sort_field 537 while [ $n -gt 1 ]; do 538 case "$dest_mod" in 539 *[$sort_sep]*) 540 # Cut text up-to (and incl.) 1st sep 541 dest_mod="${dest_mod#*[$sort_sep]}" 542 543 # Skip NULLs unless strict fields 544 [ "$sort_strict_fields" ] || 545 [ "${dest_mod%%[$sort_sep]*}" ] || 546 [ $n -eq 2 ] || 547 continue 548 ;; 549 *) 550 # Asked for a field that doesn't exist 551 dest_haskey= break 552 esac 553 n=$(( $n - 1 )) 554 done 555 556 # Trim trailing words if sort field >= 1 557 [ $sort_field -ge 1 -a "$sort_numeric" ] && 558 dest_mod="${dest_mod%%[$sort_sep]*}" 559 560 # Apply optional trim (-k POS.TRIM), cut leading chars 561 dest_mod="${dest_mod#$trim}" 562 563 # Determine type of modified comparison to use 564 # NB: Prefer numerical if requested, fallback to std 565 case "$dest_mod" in 566 ""|[!0-9]*) # NULL or begins with non-number 567 gt=">" 568 [ "$sort_numeric" ] && dest_mod=0 569 ;; 570 *) 571 if [ "$sort_numeric" ]; then 572 gt="-gt" 573 dest_mod="${dest_mod%%[!0-9]*}" 574 # NB: kill trailing non-digits 575 # for numeric comparison safety 576 else 577 gt=">" 578 fi 579 esac 580 581 # Break if we've found the proper element position 582 if [ "$curitem_haskey" -a "$dest_haskey" ]; then 583 if [ "$dest_mod" = "$curitem_mod" ]; then 584 [ "$dest_orig" ">" "$curitem_orig" ] && 585 break 586 elif [ "$dest_mod" $gt "$curitem_mod" ] \ 587 2> /dev/null 588 then 589 break 590 fi 591 else 592 [ "$dest_orig" ">" "$curitem_orig" ] && break 593 fi 594 595 # Break if we've hit the end 596 [ $d -ge $i ] && break 597 598 d=$(( $d + 1 )) 599 done 600 601 # Shift remaining positions forward, making room for new item 602 n=$i 603 while [ $n -ge $d ]; do 604 # Shift destination item forward one placement 605 eval dest_$(( $n + 1 ))=\"\$dest_$n\" 606 n=$(( $n - 1 )) 607 done 608 609 # Place the element 610 if [ $i -eq 1 ]; then 611 local dest_1="$curitem" 612 else 613 local dest_$d="$curitem" 614 fi 615 616 i=$(( $i + 1 )) 617 done 618 619 # Print sorted results 620 d=1 621 while [ $d -le $nitems ]; do 622 eval echo \"\$dest_$d\" 623 d=$(( $d + 1 )) 624 done 625} 626 627# 628# wait_for_pids pid [pid ...] 629# spins until none of the pids exist 630# 631wait_for_pids() 632{ 633 local _list _prefix _nlist _j 634 635 _list="$@" 636 if [ -z "$_list" ]; then 637 return 638 fi 639 _prefix= 640 while true; do 641 _nlist=""; 642 for _j in $_list; do 643 if kill -0 $_j 2>/dev/null; then 644 _nlist="${_nlist}${_nlist:+ }$_j" 645 [ -n "$_prefix" ] && sleep 1 646 fi 647 done 648 if [ -z "$_nlist" ]; then 649 break 650 fi 651 _list=$_nlist 652 echo -n ${_prefix:-"Waiting for PIDS: "}$_list 653 _prefix=", " 654 pwait $_list 2>/dev/null 655 done 656 if [ -n "$_prefix" ]; then 657 echo "." 658 fi 659} 660 661# 662# get_pidfile_from_conf string file 663# 664# Takes a string to search for in the specified file. 665# Ignores lines with traditional comment characters. 666# 667# Example: 668# 669# if get_pidfile_from_conf string file; then 670# pidfile="$_pidfile_from_conf" 671# else 672# pidfile='appropriate default' 673# fi 674# 675get_pidfile_from_conf() 676{ 677 if [ -z "$1" -o -z "$2" ]; then 678 err 3 "USAGE: get_pidfile_from_conf string file ($name)" 679 fi 680 681 local string file line 682 683 string="$1" ; file="$2" 684 685 if [ ! -s "$file" ]; then 686 err 3 "get_pidfile_from_conf: $file does not exist ($name)" 687 fi 688 689 while read line; do 690 case "$line" in 691 *[#\;]*${string}*) continue ;; 692 *${string}*) break ;; 693 esac 694 done < $file 695 696 if [ -n "$line" ]; then 697 line=${line#*/} 698 _pidfile_from_conf="/${line%%[\"\;]*}" 699 else 700 return 1 701 fi 702} 703 704# 705# check_startmsgs 706# If rc_quiet is set (usually as a result of using faststart at 707# boot time) check if rc_startmsgs is enabled. 708# 709check_startmsgs() 710{ 711 if [ -n "$rc_quiet" ]; then 712 checkyesno rc_startmsgs 713 else 714 return 0 715 fi 716} 717 718# 719# run_rc_command argument 720# Search for argument in the list of supported commands, which is: 721# "start stop restart rcvar status poll ${extra_commands}" 722# If there's a match, run ${argument}_cmd or the default method 723# (see below). 724# 725# If argument has a given prefix, then change the operation as follows: 726# Prefix Operation 727# ------ --------- 728# fast Skip the pid check, and set rc_fast=yes, rc_quiet=yes 729# force Set ${rcvar} to YES, and set rc_force=yes 730# one Set ${rcvar} to YES 731# quiet Don't output some diagnostics, and set rc_quiet=yes 732# 733# The following globals are used: 734# 735# Name Needed Purpose 736# ---- ------ ------- 737# name y Name of script. 738# 739# command n Full path to command. 740# Not needed if ${rc_arg}_cmd is set for 741# each keyword. 742# 743# command_args n Optional args/shell directives for command. 744# 745# command_interpreter n If not empty, command is interpreted, so 746# call check_{pidfile,process}() appropriately. 747# 748# desc n Description of script. 749# 750# extra_commands n List of extra commands supported. 751# 752# pidfile n If set, use check_pidfile $pidfile $command, 753# otherwise use check_process $command. 754# In either case, only check if $command is set. 755# 756# procname n Process name to check for instead of $command. 757# 758# rcvar n This is checked with checkyesno to determine 759# if the action should be run. 760# 761# ${name}_program n Full path to command. 762# Meant to be used in /etc/rc.conf to override 763# ${command}. 764# 765# ${name}_chroot n Directory to chroot to before running ${command} 766# Requires /usr to be mounted. 767# 768# ${name}_chdir n Directory to cd to before running ${command} 769# (if not using ${name}_chroot). 770# 771# ${name}_flags n Arguments to call ${command} with. 772# NOTE: $flags from the parent environment 773# can be used to override this. 774# 775# ${name}_env n Environment variables to run ${command} with. 776# 777# ${name}_env_file n File to source variables to run ${command} with. 778# 779# ${name}_fib n Routing table number to run ${command} with. 780# 781# ${name}_nice n Nice level to run ${command} at. 782# 783# ${name}_oomprotect n Don't kill ${command} when swap space is exhausted. 784# 785# ${name}_user n User to run ${command} as, using su(1) if not 786# using ${name}_chroot. 787# Requires /usr to be mounted. 788# 789# ${name}_group n Group to run chrooted ${command} as. 790# Requires /usr to be mounted. 791# 792# ${name}_groups n Comma separated list of supplementary groups 793# to run the chrooted ${command} with. 794# Requires /usr to be mounted. 795# 796# ${name}_prepend n Command added before ${command}. 797# 798# ${name}_login_class n Login class to use, else "daemon". 799# 800# ${name}_limits n limits(1) to apply to ${command}. 801# 802# ${rc_arg}_cmd n If set, use this as the method when invoked; 803# Otherwise, use default command (see below) 804# 805# ${rc_arg}_precmd n If set, run just before performing the 806# ${rc_arg}_cmd method in the default 807# operation (i.e, after checking for required 808# bits and process (non)existence). 809# If this completes with a non-zero exit code, 810# don't run ${rc_arg}_cmd. 811# 812# ${rc_arg}_postcmd n If set, run just after performing the 813# ${rc_arg}_cmd method, if that method 814# returned a zero exit code. 815# 816# required_dirs n If set, check for the existence of the given 817# directories before running a (re)start command. 818# 819# required_files n If set, check for the readability of the given 820# files before running a (re)start command. 821# 822# required_modules n If set, ensure the given kernel modules are 823# loaded before running a (re)start command. 824# The check and possible loads are actually 825# done after start_precmd so that the modules 826# aren't loaded in vain, should the precmd 827# return a non-zero status to indicate a error. 828# If a word in the list looks like "foo:bar", 829# "foo" is the KLD file name and "bar" is the 830# module name. If a word looks like "foo~bar", 831# "foo" is the KLD file name and "bar" is a 832# egrep(1) pattern matching the module name. 833# Otherwise the module name is assumed to be 834# the same as the KLD file name, which is most 835# common. See load_kld(). 836# 837# required_vars n If set, perform checkyesno on each of the 838# listed variables before running the default 839# (re)start command. 840# 841# Default behaviour for a given argument, if no override method is 842# provided: 843# 844# Argument Default behaviour 845# -------- ----------------- 846# start if !running && checkyesno ${rcvar} 847# ${command} 848# 849# stop if ${pidfile} 850# rc_pid=$(check_pidfile $pidfile $command) 851# else 852# rc_pid=$(check_process $command) 853# kill $sig_stop $rc_pid 854# wait_for_pids $rc_pid 855# ($sig_stop defaults to TERM.) 856# 857# reload Similar to stop, except use $sig_reload instead, 858# and doesn't wait_for_pids. 859# $sig_reload defaults to HUP. 860# Note that `reload' isn't provided by default, 861# it should be enabled via $extra_commands. 862# 863# restart Run `stop' then `start'. 864# 865# status Show if ${command} is running, etc. 866# 867# poll Wait for ${command} to exit. 868# 869# rcvar Display what rc.conf variable is used (if any). 870# 871# enabled Return true if the service is enabled. 872# 873# describe Show the service's description 874# 875# extracommands Show the service's extra commands 876# 877# Variables available to methods, and after run_rc_command() has 878# completed: 879# 880# Variable Purpose 881# -------- ------- 882# rc_arg Argument to command, after fast/force/one processing 883# performed 884# 885# rc_flags Flags to start the default command with. 886# Defaults to ${name}_flags, unless overridden 887# by $flags from the environment. 888# This variable may be changed by the precmd method. 889# 890# rc_service Path to the service being executed, in case the service 891# needs to re-invoke itself. 892# 893# rc_pid PID of command (if appropriate) 894# 895# rc_fast Not empty if "fast" was provided (q.v.) 896# 897# rc_force Not empty if "force" was provided (q.v.) 898# 899# rc_quiet Not empty if "quiet" was provided 900# 901# 902run_rc_command() 903{ 904 _return=0 905 rc_arg=$1 906 if [ -z "$name" ]; then 907 err 3 'run_rc_command: $name is not set.' 908 fi 909 910 # Don't repeat the first argument when passing additional command- 911 # line arguments to the command subroutines. 912 # 913 shift 1 914 rc_extra_args="$*" 915 916 _rc_prefix= 917 case "$rc_arg" in 918 fast*) # "fast" prefix; don't check pid 919 rc_arg=${rc_arg#fast} 920 rc_fast=yes 921 rc_quiet=yes 922 ;; 923 force*) # "force" prefix; always run 924 rc_force=yes 925 _rc_prefix=force 926 rc_arg=${rc_arg#${_rc_prefix}} 927 if [ -n "${rcvar}" ]; then 928 eval ${rcvar}=YES 929 fi 930 ;; 931 one*) # "one" prefix; set ${rcvar}=yes 932 _rc_prefix=one 933 rc_arg=${rc_arg#${_rc_prefix}} 934 if [ -n "${rcvar}" ]; then 935 eval ${rcvar}=YES 936 fi 937 ;; 938 quiet*) # "quiet" prefix; omit some messages 939 _rc_prefix=quiet 940 rc_arg=${rc_arg#${_rc_prefix}} 941 rc_quiet=yes 942 ;; 943 esac 944 945 eval _override_command=\$${name}_program 946 command=${_override_command:-$command} 947 948 _keywords="start stop restart rcvar enable disable delete enabled describe extracommands $extra_commands" 949 rc_pid= 950 _pidcmd= 951 _procname=${procname:-${command}} 952 953 # setup pid check command 954 if [ -n "$_procname" ]; then 955 if [ -n "$pidfile" ]; then 956 _pidcmd='rc_pid=$(check_pidfile '"$pidfile $_procname $command_interpreter"')' 957 else 958 _pidcmd='rc_pid=$(check_process '"$_procname $command_interpreter"')' 959 fi 960 _keywords="${_keywords} status poll" 961 else 962 if [ ! -z "${status_cmd}" ] 963 then 964 _keywords="${_keywords} status" 965 fi 966 fi 967 968 if [ -z "$rc_arg" ]; then 969 rc_usage $_keywords 970 fi 971 972 if [ "$rc_arg" = "enabled" ] ; then 973 checkyesno ${rcvar} 974 return $? 975 fi 976 977 if [ -n "$flags" ]; then # allow override from environment 978 rc_flags=$flags 979 else 980 eval rc_flags=\$${name}_flags 981 fi 982 eval _chdir=\$${name}_chdir _chroot=\$${name}_chroot \ 983 _nice=\$${name}_nice _user=\$${name}_user \ 984 _group=\$${name}_group _groups=\$${name}_groups \ 985 _fib=\$${name}_fib _env=\$${name}_env \ 986 _prepend=\$${name}_prepend _login_class=\${${name}_login_class:-daemon} \ 987 _limits=\$${name}_limits _oomprotect=\$${name}_oomprotect \ 988 _env_file=\$${name}_env_file 989 990 if [ -n "$_env_file" ] && [ -r "${_env_file}" ]; then # load env from file 991 set -a 992 . $_env_file 993 set +a 994 fi 995 996 if [ -n "$_user" ]; then # unset $_user if running as that user 997 if [ "$_user" = "$(eval $IDCMD)" ]; then 998 unset _user 999 fi 1000 fi 1001 1002 [ -z "$autoboot" ] && eval $_pidcmd # determine the pid if necessary 1003 1004 for _elem in $_keywords; do 1005 if [ "$_elem" != "$rc_arg" ]; then 1006 continue 1007 fi 1008 # if ${rcvar} is set, $1 is not "rcvar", "describe", 1009 # "enable" or "delete", and ${rc_pid} is not set, run: 1010 # checkyesno ${rcvar} 1011 # and return if that failed 1012 # 1013 if [ -n "${rcvar}" -a "$rc_arg" != "rcvar" -a "$rc_arg" != "stop" \ 1014 -a "$rc_arg" != "delete" -a "$rc_arg" != "enable" \ 1015 -a "$rc_arg" != "describe" ] || 1016 [ -n "${rcvar}" -a "$rc_arg" = "stop" -a -z "${rc_pid}" ]; then 1017 if ! checkyesno ${rcvar}; then 1018 if [ -n "${rc_quiet}" ]; then 1019 return 0 1020 fi 1021 echo -n "Cannot '${rc_arg}' $name. Set ${rcvar} to " 1022 echo -n "YES in /etc/rc.conf or use 'one${rc_arg}' " 1023 echo "instead of '${rc_arg}'." 1024 return 0 1025 fi 1026 fi 1027 1028 if [ $rc_arg = "start" -a -z "$rc_fast" -a -n "$rc_pid" ]; then 1029 if [ -z "$rc_quiet" ]; then 1030 echo 1>&2 "${name} already running? " \ 1031 "(pid=$rc_pid)." 1032 fi 1033 return 1 1034 fi 1035 1036 # if there's a custom ${XXX_cmd}, 1037 # run that instead of the default 1038 # 1039 eval _cmd=\$${rc_arg}_cmd \ 1040 _precmd=\$${rc_arg}_precmd \ 1041 _postcmd=\$${rc_arg}_postcmd 1042 1043 if [ -n "$_cmd" ]; then 1044 if [ -n "$_env" ]; then 1045 eval "export -- $_env" 1046 fi 1047 _run_rc_precmd || return 1 1048 _run_rc_doit "$_cmd $rc_extra_args" || return 1 1049 _run_rc_postcmd 1050 return $_return 1051 fi 1052 1053 case "$rc_arg" in # default operations... 1054 1055 describe) 1056 if [ -n "$desc" ]; then 1057 echo "$desc" 1058 fi 1059 ;; 1060 1061 extracommands) 1062 echo "$extra_commands" 1063 ;; 1064 1065 enable) 1066 _out=$(/usr/sbin/sysrc -vs "$name" "$rcvar=YES") && 1067 echo "$name enabled in ${_out%%:*}" 1068 ;; 1069 1070 disable) 1071 _out=$(/usr/sbin/sysrc -vs "$name" "$rcvar=NO") && 1072 echo "$name disabled in ${_out%%:*}" 1073 ;; 1074 1075 delete) 1076 _files= 1077 for _file in $(sysrc -lEs "$name"); do 1078 _out=$(sysrc -Fif $_file "$rcvar") && _files="$_files $_file" 1079 done 1080 /usr/sbin/sysrc -x "$rcvar" && echo "$rcvar deleted in ${_files# }" 1081 # delete file in rc.conf.d if desired and empty. 1082 checkyesno service_delete_empty || _files= 1083 for _file in $_files; do 1084 [ "$_file" = "${_file#*/rc.conf.d/}" ] && continue 1085 [ $(/usr/bin/stat -f%z $_file) -gt 0 ] && continue 1086 /bin/rm "$_file" && echo "Empty file $_file removed" 1087 done 1088 ;; 1089 1090 status) 1091 _run_rc_precmd || return 1 1092 if [ -n "$rc_pid" ]; then 1093 echo "${name} is running as pid $rc_pid." 1094 else 1095 echo "${name} is not running." 1096 return 1 1097 fi 1098 _run_rc_postcmd 1099 ;; 1100 1101 start) 1102 if [ ! -x "${_chroot}${_chroot:+/}${command}" ]; then 1103 warn "run_rc_command: cannot run $command" 1104 return 1 1105 fi 1106 1107 if ! _run_rc_precmd; then 1108 warn "failed precmd routine for ${name}" 1109 return 1 1110 fi 1111 1112 # setup the full command to run 1113 # 1114 check_startmsgs && echo "Starting ${name}." 1115 if [ -n "$_chroot" ]; then 1116 _cd= 1117 _doit="\ 1118${_nice:+nice -n $_nice }\ 1119${_fib:+setfib -F $_fib }\ 1120${_env:+env $_env }\ 1121chroot ${_user:+-u $_user }${_group:+-g $_group }${_groups:+-G $_groups }\ 1122$_chroot $command $rc_flags $command_args" 1123 else 1124 _cd="${_chdir:+cd $_chdir && }" 1125 _doit="\ 1126${_fib:+setfib -F $_fib }\ 1127${_env:+env $_env }\ 1128$command $rc_flags $command_args" 1129 if [ -n "$_user" ]; then 1130 _doit="su -m $_user -c 'sh -c \"$_doit\"'" 1131 fi 1132 if [ -n "$_nice" ]; then 1133 if [ -z "$_user" ]; then 1134 _doit="sh -c \"$_doit\"" 1135 fi 1136 _doit="nice -n $_nice $_doit" 1137 fi 1138 if [ -n "$_prepend" ]; then 1139 _doit="$_prepend $_doit" 1140 fi 1141 fi 1142 1143 # Prepend default limits 1144 _doit="$_cd limits -C $_login_class $_limits $_doit" 1145 1146 # run the full command 1147 # 1148 if ! _run_rc_doit "$_doit"; then 1149 warn "failed to start ${name}" 1150 return 1 1151 fi 1152 1153 # finally, run postcmd 1154 # 1155 _run_rc_postcmd 1156 ;; 1157 1158 stop) 1159 if [ -z "$rc_pid" ]; then 1160 [ -n "$rc_fast" ] && return 0 1161 _run_rc_notrunning 1162 return 1 1163 fi 1164 1165 _run_rc_precmd || return 1 1166 1167 # send the signal to stop 1168 # 1169 echo "Stopping ${name}." 1170 _doit=$(_run_rc_killcmd "${sig_stop:-TERM}") 1171 _run_rc_doit "$_doit" || return 1 1172 1173 # wait for the command to exit, 1174 # and run postcmd. 1175 wait_for_pids $rc_pid 1176 1177 _run_rc_postcmd 1178 ;; 1179 1180 reload) 1181 if [ -z "$rc_pid" ]; then 1182 _run_rc_notrunning 1183 return 1 1184 fi 1185 1186 _run_rc_precmd || return 1 1187 1188 _doit=$(_run_rc_killcmd "${sig_reload:-HUP}") 1189 _run_rc_doit "$_doit" || return 1 1190 1191 _run_rc_postcmd 1192 ;; 1193 1194 restart) 1195 # prevent restart being called more 1196 # than once by any given script 1197 # 1198 if ${_rc_restart_done:-false}; then 1199 return 0 1200 fi 1201 _rc_restart_done=true 1202 1203 _run_rc_precmd || return 1 1204 1205 # run those in a subshell to keep global variables 1206 ( run_rc_command ${_rc_prefix}stop $rc_extra_args ) 1207 ( run_rc_command ${_rc_prefix}start $rc_extra_args ) 1208 _return=$? 1209 [ $_return -ne 0 ] && [ -z "$rc_force" ] && return 1 1210 1211 _run_rc_postcmd 1212 ;; 1213 1214 poll) 1215 _run_rc_precmd || return 1 1216 if [ -n "$rc_pid" ]; then 1217 wait_for_pids $rc_pid 1218 fi 1219 _run_rc_postcmd 1220 ;; 1221 1222 rcvar) 1223 echo -n "# $name" 1224 if [ -n "$desc" ]; then 1225 echo " : $desc" 1226 else 1227 echo "" 1228 fi 1229 echo "#" 1230 # Get unique vars in $rcvar $rcvars 1231 for _v in $rcvar $rcvars; do 1232 case $v in 1233 $_v\ *|\ *$_v|*\ $_v\ *) ;; 1234 *) v="${v# } $_v" ;; 1235 esac 1236 done 1237 1238 # Display variables. 1239 for _v in $v; do 1240 if [ -z "$_v" ]; then 1241 continue 1242 fi 1243 1244 eval _desc=\$${_v}_desc 1245 eval _defval=\$${_v}_defval 1246 _h="-" 1247 1248 eval echo \"$_v=\\\"\$$_v\\\"\" 1249 # decode multiple lines of _desc 1250 while [ -n "$_desc" ]; do 1251 case $_desc in 1252 *^^*) 1253 echo "# $_h ${_desc%%^^*}" 1254 _desc=${_desc#*^^} 1255 _h=" " 1256 ;; 1257 *) 1258 echo "# $_h ${_desc}" 1259 break 1260 ;; 1261 esac 1262 done 1263 echo "# (default: \"$_defval\")" 1264 done 1265 echo "" 1266 ;; 1267 1268 *) 1269 rc_usage $_keywords 1270 ;; 1271 1272 esac 1273 1274 # Apply protect(1) to the PID if ${name}_oomprotect is set. 1275 case "$rc_arg" in 1276 start) 1277 # We cannot use protect(1) inside jails. 1278 if [ -n "$_oomprotect" ] && [ -f "${PROTECT}" ] && 1279 [ "$(sysctl -n security.jail.jailed)" -eq 0 ]; then 1280 [ -z "${rc_pid}" ] && eval $_pidcmd 1281 case $_oomprotect in 1282 [Aa][Ll][Ll]) 1283 ${PROTECT} -i -p ${rc_pid} 1284 ;; 1285 [Yy][Ee][Ss]) 1286 ${PROTECT} -p ${rc_pid} 1287 ;; 1288 esac 1289 fi 1290 ;; 1291 esac 1292 1293 return $_return 1294 done 1295 1296 echo 1>&2 "$0: unknown directive '$rc_arg'." 1297 rc_usage $_keywords 1298 # not reached 1299} 1300 1301# 1302# Helper functions for run_rc_command: common code. 1303# They use such global variables besides the exported rc_* ones: 1304# 1305# name R/W 1306# ------------------ 1307# _precmd R 1308# _postcmd R 1309# _return W 1310# 1311_run_rc_precmd() 1312{ 1313 check_required_before "$rc_arg" || return 1 1314 1315 if [ -n "$_precmd" ]; then 1316 debug "run_rc_command: ${rc_arg}_precmd: $_precmd $rc_extra_args" 1317 eval "$_precmd $rc_extra_args" 1318 _return=$? 1319 1320 # If precmd failed and force isn't set, request exit. 1321 if [ $_return -ne 0 ] && [ -z "$rc_force" ]; then 1322 return 1 1323 fi 1324 fi 1325 1326 check_required_after "$rc_arg" || return 1 1327 1328 return 0 1329} 1330 1331_run_rc_postcmd() 1332{ 1333 if [ -n "$_postcmd" ]; then 1334 debug "run_rc_command: ${rc_arg}_postcmd: $_postcmd $rc_extra_args" 1335 eval "$_postcmd $rc_extra_args" 1336 _return=$? 1337 fi 1338 return 0 1339} 1340 1341_run_rc_doit() 1342{ 1343 debug "run_rc_command: doit: $*" 1344 eval "$@" 1345 _return=$? 1346 1347 # If command failed and force isn't set, request exit. 1348 if [ $_return -ne 0 ] && [ -z "$rc_force" ]; then 1349 return 1 1350 fi 1351 1352 return 0 1353} 1354 1355_run_rc_notrunning() 1356{ 1357 local _pidmsg 1358 1359 if [ -n "$pidfile" ]; then 1360 _pidmsg=" (check $pidfile)." 1361 else 1362 _pidmsg= 1363 fi 1364 echo 1>&2 "${name} not running?${_pidmsg}" 1365} 1366 1367_run_rc_killcmd() 1368{ 1369 local _cmd 1370 1371 _cmd="kill -$1 $rc_pid" 1372 if [ -n "$_user" ]; then 1373 _cmd="su -m ${_user} -c 'sh -c \"${_cmd}\"'" 1374 fi 1375 echo "$_cmd" 1376} 1377 1378# 1379# run_rc_script file arg 1380# Start the script `file' with `arg', and correctly handle the 1381# return value from the script. 1382# If `file' ends with `.sh' and lives in /etc/rc.d, ignore it as it's 1383# an old-style startup file. 1384# If `file' ends with `.sh' and does not live in /etc/rc.d, it's sourced 1385# into the current environment if $rc_fast_and_loose is set; otherwise 1386# it is run as a child process. 1387# If `file' appears to be a backup or scratch file, ignore it. 1388# Otherwise if it is executable run as a child process. 1389# 1390run_rc_script() 1391{ 1392 _file=$1 1393 _arg=$2 1394 if [ -z "$_file" -o -z "$_arg" ]; then 1395 err 3 'USAGE: run_rc_script file arg' 1396 fi 1397 1398 unset name command command_args command_interpreter \ 1399 extra_commands pidfile procname \ 1400 rcvar rcvars rcvars_obsolete required_dirs required_files \ 1401 required_vars 1402 eval unset ${_arg}_cmd ${_arg}_precmd ${_arg}_postcmd 1403 1404 rc_service="$_file" 1405 case "$_file" in 1406 /etc/rc.d/*.sh) # no longer allowed in the base 1407 warn "Ignoring old-style startup script $_file" 1408 ;; 1409 *[~#]|*.OLD|*.bak|*.orig|*,v) # scratch file; skip 1410 warn "Ignoring scratch file $_file" 1411 ;; 1412 *) # run in subshell 1413 if [ -x $_file ]; then 1414 if [ -n "$rc_boottrace" ]; then 1415 boottrace_fn "$_file" "$_arg" 1416 elif [ -n "$rc_fast_and_loose" ]; then 1417 set $_arg; . $_file 1418 else 1419 ( trap "echo Script $_file interrupted >&2 ; kill -QUIT $$" 3 1420 trap "echo Script $_file interrupted >&2 ; exit 1" 2 1421 trap "echo Script $_file running >&2" 29 1422 set $_arg; . $_file ) 1423 fi 1424 fi 1425 ;; 1426 esac 1427} 1428 1429boottrace_fn() 1430{ 1431 local _file _arg 1432 _file=$1 1433 _arg=$2 1434 1435 if [ -n "$rc_fast_and_loose" ]; then 1436 boottrace_sysctl "$_file start" 1437 set $_arg; . $_file 1438 boottrace_sysctl "$_file done" 1439 else 1440 $boottrace_cmd "$_file" "$_arg" 1441 fi 1442} 1443 1444boottrace_sysctl() 1445{ 1446 ${SYSCTL} kern.boottrace.boottrace="$1" 1447} 1448 1449# 1450# load_rc_config [service] 1451# Source in the configuration file(s) for a given service. 1452# If no service is specified, only the global configuration 1453# file(s) will be loaded. 1454# 1455load_rc_config() 1456{ 1457 local _name _rcvar_val _var _defval _v _msg _new _d 1458 _name=$1 1459 1460 if ${_rc_conf_loaded:-false}; then 1461 : 1462 else 1463 if [ -r /etc/defaults/rc.conf ]; then 1464 debug "Sourcing /etc/defaults/rc.conf" 1465 . /etc/defaults/rc.conf 1466 source_rc_confs 1467 elif [ -r /etc/rc.conf ]; then 1468 debug "Sourcing /etc/rc.conf (/etc/defaults/rc.conf doesn't exist)." 1469 . /etc/rc.conf 1470 fi 1471 _rc_conf_loaded=true 1472 fi 1473 1474 # If a service name was specified, attempt to load 1475 # service-specific configuration 1476 if [ -n "$_name" ] ; then 1477 for _d in /etc ${local_startup}; do 1478 _d=${_d%/rc.d} 1479 if [ -f ${_d}/rc.conf.d/"$_name" ]; then 1480 debug "Sourcing ${_d}/rc.conf.d/$_name" 1481 . ${_d}/rc.conf.d/"$_name" 1482 elif [ -d ${_d}/rc.conf.d/"$_name" ] ; then 1483 local _rc 1484 for _rc in ${_d}/rc.conf.d/"$_name"/* ; do 1485 if [ -f "$_rc" ] ; then 1486 debug "Sourcing $_rc" 1487 . "$_rc" 1488 fi 1489 done 1490 fi 1491 done 1492 fi 1493 1494 # Set defaults if defined. 1495 for _var in $rcvar $rcvars; do 1496 eval _defval=\$${_var}_defval 1497 if [ -n "$_defval" ]; then 1498 eval : \${$_var:=\$${_var}_defval} 1499 fi 1500 done 1501 1502 # check obsolete rc.conf variables 1503 for _var in $rcvars_obsolete; do 1504 eval _v=\$$_var 1505 eval _msg=\$${_var}_obsolete_msg 1506 eval _new=\$${_var}_newvar 1507 case $_v in 1508 "") 1509 ;; 1510 *) 1511 if [ -z "$_new" ]; then 1512 _msg="Ignored." 1513 else 1514 eval $_new=\"\$$_var\" 1515 if [ -z "$_msg" ]; then 1516 _msg="Use \$$_new instead." 1517 fi 1518 fi 1519 warn "\$$_var is obsolete. $_msg" 1520 ;; 1521 esac 1522 done 1523} 1524 1525# 1526# load_rc_config_var name var 1527# Read the rc.conf(5) var for name and set in the 1528# current shell, using load_rc_config in a subshell to prevent 1529# unwanted side effects from other variable assignments. 1530# 1531load_rc_config_var() 1532{ 1533 if [ $# -ne 2 ]; then 1534 err 3 'USAGE: load_rc_config_var name var' 1535 fi 1536 eval $(eval '( 1537 load_rc_config '$1' >/dev/null; 1538 if [ -n "${'$2'}" -o "${'$2'-UNSET}" != "UNSET" ]; then 1539 echo '$2'=\'\''${'$2'}\'\''; 1540 fi 1541 )' ) 1542} 1543 1544# 1545# rc_usage commands 1546# Print a usage string for $0, with `commands' being a list of 1547# valid commands. 1548# 1549rc_usage() 1550{ 1551 echo -n 1>&2 "Usage: $0 [fast|force|one|quiet](" 1552 1553 _sep= 1554 for _elem; do 1555 echo -n 1>&2 "$_sep$_elem" 1556 _sep="|" 1557 done 1558 echo 1>&2 ")" 1559 exit 1 1560} 1561 1562# 1563# err exitval message 1564# Display message to stderr and log to the syslog, and exit with exitval. 1565# 1566err() 1567{ 1568 exitval=$1 1569 shift 1570 1571 if [ -x /usr/bin/logger ]; then 1572 logger "$0: ERROR: $*" 1573 fi 1574 echo 1>&2 "$0: ERROR: $*" 1575 exit $exitval 1576} 1577 1578# 1579# warn message 1580# Display message to stderr and log to the syslog. 1581# 1582warn() 1583{ 1584 if [ -x /usr/bin/logger ]; then 1585 logger "$0: WARNING: $*" 1586 fi 1587 echo 1>&2 "$0: WARNING: $*" 1588} 1589 1590# 1591# info message 1592# Display informational message to stdout and log to syslog. 1593# 1594info() 1595{ 1596 case ${rc_info} in 1597 [Yy][Ee][Ss]|[Tt][Rr][Uu][Ee]|[Oo][Nn]|1) 1598 if [ -x /usr/bin/logger ]; then 1599 logger "$0: INFO: $*" 1600 fi 1601 echo "$0: INFO: $*" 1602 ;; 1603 esac 1604} 1605 1606# 1607# debug message 1608# If debugging is enabled in rc.conf output message to stderr. 1609# BEWARE that you don't call any subroutine that itself calls this 1610# function. 1611# 1612debug() 1613{ 1614 case ${rc_debug} in 1615 [Yy][Ee][Ss]|[Tt][Rr][Uu][Ee]|[Oo][Nn]|1) 1616 if [ -x /usr/bin/logger ]; then 1617 logger "$0: DEBUG: $*" 1618 fi 1619 echo 1>&2 "$0: DEBUG: $*" 1620 ;; 1621 esac 1622} 1623 1624# 1625# backup_file action file cur backup 1626# Make a backup copy of `file' into `cur', and save the previous 1627# version of `cur' as `backup'. 1628# 1629# The `action' keyword can be one of the following: 1630# 1631# add `file' is now being backed up (and is possibly 1632# being reentered into the backups system). `cur' 1633# is created. 1634# 1635# update `file' has changed and needs to be backed up. 1636# If `cur' exists, it is copied to `back' 1637# and then `file' is copied to `cur'. 1638# 1639# remove `file' is no longer being tracked by the backups 1640# system. `cur' is moved `back'. 1641# 1642# 1643backup_file() 1644{ 1645 _action=$1 1646 _file=$2 1647 _cur=$3 1648 _back=$4 1649 1650 case $_action in 1651 add|update) 1652 if [ -f $_cur ]; then 1653 cp -p $_cur $_back 1654 fi 1655 cp -p $_file $_cur 1656 chown root:wheel $_cur 1657 ;; 1658 remove) 1659 mv -f $_cur $_back 1660 ;; 1661 esac 1662} 1663 1664# make_symlink src link 1665# Make a symbolic link 'link' to src from basedir. If the 1666# directory in which link is to be created does not exist 1667# a warning will be displayed and an error will be returned. 1668# Returns 0 on success, 1 otherwise. 1669# 1670make_symlink() 1671{ 1672 local src link linkdir _me 1673 src="$1" 1674 link="$2" 1675 linkdir="`dirname $link`" 1676 _me="make_symlink()" 1677 1678 if [ -z "$src" -o -z "$link" ]; then 1679 warn "$_me: requires two arguments." 1680 return 1 1681 fi 1682 if [ ! -d "$linkdir" ]; then 1683 warn "$_me: the directory $linkdir does not exist." 1684 return 1 1685 fi 1686 if ! ln -sf $src $link; then 1687 warn "$_me: unable to make a symbolic link from $link to $src" 1688 return 1 1689 fi 1690 return 0 1691} 1692 1693# devfs_rulesets_from_file file 1694# Reads a set of devfs commands from file, and creates 1695# the specified rulesets with their rules. Returns non-zero 1696# if there was an error. 1697# 1698devfs_rulesets_from_file() 1699{ 1700 local file _err _me _opts 1701 file="$1" 1702 _me="devfs_rulesets_from_file" 1703 _err=0 1704 1705 if [ -z "$file" ]; then 1706 warn "$_me: you must specify a file" 1707 return 1 1708 fi 1709 if [ ! -e "$file" ]; then 1710 debug "$_me: no such file ($file)" 1711 return 0 1712 fi 1713 1714 # Disable globbing so that the rule patterns are not expanded 1715 # by accident with matching filesystem entries. 1716 _opts=$-; set -f 1717 1718 debug "reading rulesets from file ($file)" 1719 { while read line 1720 do 1721 case $line in 1722 \#*) 1723 continue 1724 ;; 1725 \[*\]*) 1726 rulenum=`expr "$line" : "\[.*=\([0-9]*\)\]"` 1727 if [ -z "$rulenum" ]; then 1728 warn "$_me: cannot extract rule number ($line)" 1729 _err=1 1730 break 1731 fi 1732 rulename=`expr "$line" : "\[\(.*\)=[0-9]*\]"` 1733 if [ -z "$rulename" ]; then 1734 warn "$_me: cannot extract rule name ($line)" 1735 _err=1 1736 break; 1737 fi 1738 eval $rulename=\$rulenum 1739 debug "found ruleset: $rulename=$rulenum" 1740 if ! /sbin/devfs rule -s $rulenum delset; then 1741 _err=1 1742 break 1743 fi 1744 ;; 1745 *) 1746 rulecmd="${line%%"\#*"}" 1747 # evaluate the command incase it includes 1748 # other rules 1749 if [ -n "$rulecmd" ]; then 1750 debug "adding rule ($rulecmd)" 1751 if ! eval /sbin/devfs rule -s $rulenum $rulecmd 1752 then 1753 _err=1 1754 break 1755 fi 1756 fi 1757 ;; 1758 esac 1759 if [ $_err -ne 0 ]; then 1760 debug "error in $_me" 1761 break 1762 fi 1763 done } < $file 1764 case $_opts in *f*) ;; *) set +f ;; esac 1765 return $_err 1766} 1767 1768# devfs_init_rulesets 1769# Initializes rulesets from configuration files. Returns 1770# non-zero if there was an error. 1771# 1772devfs_init_rulesets() 1773{ 1774 local file _me 1775 _me="devfs_init_rulesets" 1776 1777 # Go through this only once 1778 if [ -n "$devfs_rulesets_init" ]; then 1779 debug "$_me: devfs rulesets already initialized" 1780 return 1781 fi 1782 for file in $devfs_rulesets; do 1783 if ! devfs_rulesets_from_file $file; then 1784 warn "$_me: could not read rules from $file" 1785 return 1 1786 fi 1787 done 1788 devfs_rulesets_init=1 1789 debug "$_me: devfs rulesets initialized" 1790 return 0 1791} 1792 1793# devfs_set_ruleset ruleset [dir] 1794# Sets the default ruleset of dir to ruleset. The ruleset argument 1795# must be a ruleset name as specified in devfs.rules(5) file. 1796# Returns non-zero if it could not set it successfully. 1797# 1798devfs_set_ruleset() 1799{ 1800 local devdir rs _me 1801 [ -n "$1" ] && eval rs=\$$1 || rs= 1802 [ -n "$2" ] && devdir="-m "$2"" || devdir= 1803 _me="devfs_set_ruleset" 1804 1805 if [ -z "$rs" ]; then 1806 warn "$_me: you must specify a ruleset number" 1807 return 1 1808 fi 1809 debug "$_me: setting ruleset ($rs) on mount-point (${devdir#-m })" 1810 if ! /sbin/devfs $devdir ruleset $rs; then 1811 warn "$_me: unable to set ruleset $rs to ${devdir#-m }" 1812 return 1 1813 fi 1814 return 0 1815} 1816 1817# devfs_apply_ruleset ruleset [dir] 1818# Apply ruleset number $ruleset to the devfs mountpoint $dir. 1819# The ruleset argument must be a ruleset name as specified 1820# in a devfs.rules(5) file. Returns 0 on success or non-zero 1821# if it could not apply the ruleset. 1822# 1823devfs_apply_ruleset() 1824{ 1825 local devdir rs _me 1826 [ -n "$1" ] && eval rs=\$$1 || rs= 1827 [ -n "$2" ] && devdir="-m "$2"" || devdir= 1828 _me="devfs_apply_ruleset" 1829 1830 if [ -z "$rs" ]; then 1831 warn "$_me: you must specify a ruleset" 1832 return 1 1833 fi 1834 debug "$_me: applying ruleset ($rs) to mount-point (${devdir#-m })" 1835 if ! /sbin/devfs $devdir rule -s $rs applyset; then 1836 warn "$_me: unable to apply ruleset $rs to ${devdir#-m }" 1837 return 1 1838 fi 1839 return 0 1840} 1841 1842# devfs_domount dir [ruleset] 1843# Mount devfs on dir. If ruleset is specified it is set 1844# on the mount-point. It must also be a ruleset name as specified 1845# in a devfs.rules(5) file. Returns 0 on success. 1846# 1847devfs_domount() 1848{ 1849 local devdir rs _me 1850 devdir="$1" 1851 [ -n "$2" ] && rs=$2 || rs= 1852 _me="devfs_domount()" 1853 1854 if [ -z "$devdir" ]; then 1855 warn "$_me: you must specify a mount-point" 1856 return 1 1857 fi 1858 debug "$_me: mount-point is ($devdir), ruleset is ($rs)" 1859 if ! mount -t devfs dev "$devdir"; then 1860 warn "$_me: Unable to mount devfs on $devdir" 1861 return 1 1862 fi 1863 if [ -n "$rs" ]; then 1864 devfs_init_rulesets 1865 devfs_set_ruleset $rs $devdir 1866 devfs -m $devdir rule applyset 1867 fi 1868 return 0 1869} 1870 1871# Provide a function for normalizing the mounting of memory 1872# filesystems. This should allow the rest of the code here to remain 1873# as close as possible between 5-current and 4-stable. 1874# $1 = size 1875# $2 = mount point 1876# $3 = (optional) extra mdmfs flags 1877mount_md() 1878{ 1879 if [ -n "$3" ]; then 1880 flags="$3" 1881 fi 1882 /sbin/mdmfs $flags -s $1 ${mfs_type} $2 1883} 1884 1885# Code common to scripts that need to load a kernel module 1886# if it isn't in the kernel yet. Syntax: 1887# load_kld [-e regex] [-m module] file 1888# where -e or -m chooses the way to check if the module 1889# is already loaded: 1890# regex is egrep'd in the output from `kldstat -v', 1891# module is passed to `kldstat -m'. 1892# The default way is as though `-m file' were specified. 1893load_kld() 1894{ 1895 local _loaded _mod _opt _re 1896 1897 while getopts "e:m:" _opt; do 1898 case "$_opt" in 1899 e) _re="$OPTARG" ;; 1900 m) _mod="$OPTARG" ;; 1901 *) err 3 'USAGE: load_kld [-e regex] [-m module] file' ;; 1902 esac 1903 done 1904 shift $(($OPTIND - 1)) 1905 if [ $# -ne 1 ]; then 1906 err 3 'USAGE: load_kld [-e regex] [-m module] file' 1907 fi 1908 _mod=${_mod:-$1} 1909 _loaded=false 1910 if [ -n "$_re" ]; then 1911 if kldstat -v | egrep -q -e "$_re"; then 1912 _loaded=true 1913 fi 1914 else 1915 if kldstat -q -m "$_mod"; then 1916 _loaded=true 1917 fi 1918 fi 1919 if ! $_loaded; then 1920 if ! kldload "$1"; then 1921 warn "Unable to load kernel module $1" 1922 return 1 1923 else 1924 info "$1 kernel module loaded." 1925 fi 1926 else 1927 debug "load_kld: $1 kernel module already loaded." 1928 fi 1929 return 0 1930} 1931 1932# ltr str src dst [var] 1933# Change every $src in $str to $dst. 1934# Useful when /usr is not yet mounted and we cannot use tr(1), sed(1) nor 1935# awk(1). If var is non-NULL, set it to the result. 1936ltr() 1937{ 1938 local _str _src _dst _out _com _var 1939 _str="$1" 1940 _src="$2" 1941 _dst="$3" 1942 _var="$4" 1943 _out="" 1944 1945 local IFS="${_src}" 1946 for _com in ${_str}; do 1947 if [ -z "${_out}" ]; then 1948 _out="${_com}" 1949 else 1950 _out="${_out}${_dst}${_com}" 1951 fi 1952 done 1953 if [ -n "${_var}" ]; then 1954 setvar "${_var}" "${_out}" 1955 else 1956 echo "${_out}" 1957 fi 1958} 1959 1960# Creates a list of providers for GELI encryption. 1961geli_make_list() 1962{ 1963 local devices devices2 1964 local provider mountpoint type options rest 1965 1966 # Create list of GELI providers from fstab. 1967 while read provider mountpoint type options rest ; do 1968 case ":${options}" in 1969 :*noauto*) 1970 noauto=yes 1971 ;; 1972 *) 1973 noauto=no 1974 ;; 1975 esac 1976 1977 case ":${provider}" in 1978 :#*) 1979 continue 1980 ;; 1981 *.eli) 1982 # Skip swap devices. 1983 if [ "${type}" = "swap" -o "${options}" = "sw" -o "${noauto}" = "yes" ]; then 1984 continue 1985 fi 1986 devices="${devices} ${provider}" 1987 ;; 1988 esac 1989 done < /etc/fstab 1990 1991 # Append providers from geli_devices. 1992 devices="${devices} ${geli_devices}" 1993 1994 for provider in ${devices}; do 1995 provider=${provider%.eli} 1996 provider=${provider#/dev/} 1997 devices2="${devices2} ${provider}" 1998 done 1999 2000 echo ${devices2} 2001} 2002 2003# Originally, root mount hold had to be released before mounting 2004# the root filesystem. This delayed the boot, so it was changed 2005# to only wait if the root device isn't readily available. This 2006# can result in rc scripts executing before all the devices - such 2007# as graid(8), or USB disks - can be accessed. This function can 2008# be used to explicitly wait for root mount holds to be released. 2009root_hold_wait() 2010{ 2011 local wait waited holders 2012 2013 waited=0 2014 while true; do 2015 holders="$(sysctl -n vfs.root_mount_hold)" 2016 if [ -z "${holders}" ]; then 2017 break; 2018 fi 2019 if [ ${waited} -eq 0 ]; then 2020 echo -n "Waiting ${root_hold_delay}s" \ 2021 "for the root mount holders: ${holders}" 2022 else 2023 echo -n . 2024 fi 2025 if [ ${waited} -ge ${root_hold_delay} ]; then 2026 echo 2027 break 2028 fi 2029 sleep 1 2030 waited=$(($waited + 1)) 2031 done 2032} 2033 2034# Find scripts in local_startup directories that use the old syntax 2035# 2036find_local_scripts_old() { 2037 zlist='' 2038 slist='' 2039 for dir in ${local_startup}; do 2040 if [ -d "${dir}" ]; then 2041 for file in ${dir}/[0-9]*.sh; do 2042 grep '^# PROVIDE:' $file >/dev/null 2>&1 && 2043 continue 2044 zlist="$zlist $file" 2045 done 2046 for file in ${dir}/[!0-9]*.sh; do 2047 grep '^# PROVIDE:' $file >/dev/null 2>&1 && 2048 continue 2049 slist="$slist $file" 2050 done 2051 fi 2052 done 2053} 2054 2055find_local_scripts_new() { 2056 local_rc='' 2057 for dir in ${local_startup}; do 2058 if [ -d "${dir}" ]; then 2059 for file in `grep -l '^# PROVIDE:' ${dir}/* 2>/dev/null`; do 2060 case "$file" in 2061 *.sample) ;; 2062 *) if [ -x "$file" ]; then 2063 local_rc="${local_rc} ${file}" 2064 fi 2065 ;; 2066 esac 2067 done 2068 fi 2069 done 2070} 2071 2072# check_required_{before|after} command 2073# Check for things required by the command before and after its precmd, 2074# respectively. The two separate functions are needed because some 2075# conditions should prevent precmd from being run while other things 2076# depend on precmd having already been run. 2077# 2078check_required_before() 2079{ 2080 local _f 2081 2082 case "$1" in 2083 start) 2084 for _f in $required_vars; do 2085 if ! checkyesno $_f; then 2086 warn "\$${_f} is not enabled." 2087 if [ -z "$rc_force" ]; then 2088 return 1 2089 fi 2090 fi 2091 done 2092 2093 for _f in $required_dirs; do 2094 if [ ! -d "${_f}/." ]; then 2095 warn "${_f} is not a directory." 2096 if [ -z "$rc_force" ]; then 2097 return 1 2098 fi 2099 fi 2100 done 2101 2102 for _f in $required_files; do 2103 if [ ! -r "${_f}" ]; then 2104 warn "${_f} is not readable." 2105 if [ -z "$rc_force" ]; then 2106 return 1 2107 fi 2108 fi 2109 done 2110 ;; 2111 esac 2112 2113 return 0 2114} 2115 2116check_required_after() 2117{ 2118 local _f _args 2119 2120 case "$1" in 2121 start) 2122 for _f in $required_modules; do 2123 case "${_f}" in 2124 *~*) _args="-e ${_f#*~} ${_f%%~*}" ;; 2125 *:*) _args="-m ${_f#*:} ${_f%%:*}" ;; 2126 *) _args="${_f}" ;; 2127 esac 2128 if ! load_kld ${_args}; then 2129 if [ -z "$rc_force" ]; then 2130 return 1 2131 fi 2132 fi 2133 done 2134 ;; 2135 esac 2136 2137 return 0 2138} 2139 2140# check_jail mib 2141# Return true if security.jail.$mib exists and set to 1. 2142 2143check_jail() 2144{ 2145 local _mib _v 2146 2147 _mib=$1 2148 if _v=$(${SYSCTL_N} "security.jail.$_mib" 2> /dev/null); then 2149 case $_v in 2150 1) return 0;; 2151 esac 2152 fi 2153 return 1 2154} 2155 2156# check_kern_features mib 2157# Return existence of kern.features.* sysctl MIB as true or 2158# false. The result will be cached in $_rc_cache_kern_features_ 2159# namespace. "0" means the kern.features.X exists. 2160 2161check_kern_features() 2162{ 2163 local _v 2164 2165 [ -n "$1" ] || return 1; 2166 eval _v=\$_rc_cache_kern_features_$1 2167 [ -n "$_v" ] && return "$_v"; 2168 2169 if ${SYSCTL_N} kern.features.$1 > /dev/null 2>&1; then 2170 eval _rc_cache_kern_features_$1=0 2171 return 0 2172 else 2173 eval _rc_cache_kern_features_$1=1 2174 return 1 2175 fi 2176} 2177 2178# check_namevarlist var 2179# Return "0" if ${name}_var is reserved in rc.subr. 2180 2181_rc_namevarlist="program chroot chdir env flags fib nice user group groups prepend" 2182check_namevarlist() 2183{ 2184 local _v 2185 2186 for _v in $_rc_namevarlist; do 2187 case $1 in 2188 $_v) return 0 ;; 2189 esac 2190 done 2191 2192 return 1 2193} 2194 2195# _echoonce var msg mode 2196# mode=0: Echo $msg if ${$var} is empty. 2197# After doing echo, a string is set to ${$var}. 2198# 2199# mode=1: Echo $msg if ${$var} is a string with non-zero length. 2200# 2201_echoonce() 2202{ 2203 local _var _msg _mode 2204 eval _var=\$$1 2205 _msg=$2 2206 _mode=$3 2207 2208 case $_mode in 2209 1) [ -n "$_var" ] && echo "$_msg" ;; 2210 *) [ -z "$_var" ] && echo -n "$_msg" && eval "$1=finished" ;; 2211 esac 2212} 2213 2214# If the loader env variable rc.debug is set, turn on debugging. rc.conf will 2215# still override this, but /etc/defaults/rc.conf can't unconditionally set this 2216# since it would undo what we've done here. 2217if kenv -q rc.debug > /dev/null ; then 2218 rc_debug=YES 2219fi 2220 2221boottrace_cmd=`command -v boottrace` 2222if [ -n "$boottrace_cmd" ] && [ "`${SYSCTL_N} -q kern.boottrace.enabled`" = "1" ]; then 2223 rc_boottrace=YES 2224fi 2225