1# $NetBSD: rc.subr,v 1.67 2006/10/07 11:25:15 elad Exp $ 2# 3# Copyright (c) 1997-2004 The NetBSD Foundation, Inc. 4# All rights reserved. 5# 6# This code is derived from software contributed to The NetBSD Foundation 7# by Luke Mewburn. 8# 9# Redistribution and use in source and binary forms, with or without 10# modification, are permitted provided that the following conditions 11# are met: 12# 1. Redistributions of source code must retain the above copyright 13# notice, this list of conditions and the following disclaimer. 14# 2. Redistributions in binary form must reproduce the above copyright 15# notice, this list of conditions and the following disclaimer in the 16# documentation and/or other materials provided with the distribution. 17# 18# THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 19# ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 20# TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 21# PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 22# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 23# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 24# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 25# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 26# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 27# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 28# POSSIBILITY OF SUCH DAMAGE. 29# 30# rc.subr 31# functions used by various rc scripts 32# 33 34: ${RC_PID:=$$}; export RC_PID 35 36# 37# Operating System dependent/independent variables 38# 39 40if [ -n "${_rc_subr_loaded}" ]; then 41 return 42fi 43 44_rc_subr_loaded="YES" 45 46SYSCTL="/sbin/sysctl" 47SYSCTL_N="${SYSCTL} -n" 48SYSCTL_W="${SYSCTL}" 49PROTECT="/usr/bin/protect" 50ID="/usr/bin/id" 51IDCMD="if [ -x $ID ]; then $ID -un; fi" 52PS="/bin/ps -ww" 53JID=0 54CPUSET="/bin/cpuset" 55 56# rc_service provides the path to the service script that we are executing. 57# This is not being set here in an execution context, necessarily, so it's 58# really just a reasonable guess, and it will get overwritten later if 59# we are executing from some other means than direct execution by service(8) 60# or manual invocation of the service script. The prime example of this is 61# during system startup, all rc scripts will be invoked via /etc/rc, so 62# run_rc_script will overwrite rc_service with the file being sourced. 63rc_service="$0" 64 65# 66# functions 67# --------- 68 69# is_verified file 70# if VERIEXEC is active check that $file is verified 71# 72VERIEXEC="/sbin/veriexec" 73if test -x $VERIEXEC && $VERIEXEC -i active > /dev/null 2>&1; then 74 is_verified() { $VERIEXEC -x $1; } 75else 76 is_verified() { return 0; } 77fi 78 79# indicate that we have vdot 80_VDOT_SH=: 81 82# current state of O_VERIFY 83o_verify() 84{ 85 case $(echo $(set -o)) in 86 *verify" "off*) echo off;; 87 *verify" "on*) echo on;; 88 esac 89} 90 91## 92# o_verify_set want [save] 93# 94# record current state of verify in $save 95# and set it to $want if different 96# 97o_verify_set() { 98 local x=$(o_verify) 99 100 [ -z "$x" ] && return 0 101 [ -z "$2" ] || eval $2=$x 102 [ "$x" = "$1" ] && return 0 103 case "$1" in 104 on) 105 set -o verify 106 ;; 107 off) 108 set +o verify 109 ;; 110 esac 111} 112 113# for unverified files 114dotted= 115dot() 116{ 117 local f verify 118 119 o_verify_set off verify 120 for f in "$@"; do 121 if [ -f $f -a -s $f ]; then 122 dotted="$dotted $f" 123 . $f 124 fi 125 done 126 o_verify_set $verify 127} 128 129# try for verified, fallback to safe 130sdot() 131{ 132 local f 133 134 for f in "$@"; do 135 [ -f $f -a -s $f ] || continue 136 vdot $f || safe_dot $f 137 done 138} 139 140# convenience function - skip if not verified 141vdot() 142{ 143 local f rc=0 verify 144 145 o_verify_set on verify 146 for f in "$@"; do 147 [ -f $f -a -s $f ] || continue 148 if is_verified $f 2> /dev/null; then 149 dotted="$dotted $f" 150 . $f 151 else 152 rc=80 # EAUTH 153 fi 154 done 155 o_verify_set $verify 156 return $rc 157} 158 159# Exists [test] file ... 160# report the first "file" that passes "test" (default -s). 161Exists() 162{ 163 local f _t=-s 164 165 while :; do 166 : 1=$1 167 case "$1" in 168 -?) 169 _t=$1 170 shift 171 ;; 172 *) 173 break 174 ;; 175 esac 176 done 177 178 for f in "$@"; do 179 [ $_t $f ] || continue 180 echo $f 181 return 0 182 done 183 return 1 184} 185 186# do we have $1 (could be a function) 187have() 188{ 189 type "$1" > /dev/null 2>&1 190} 191 192# provide consistent means of logging progress 193rc_log() 194{ 195 date "+@ %s [%Y-%m-%d %H:%M:%S %Z] $*" 196} 197 198# only rc_log if tracing enabled 199# and $level >= $RC_LEVEL 200rc_trace() 201{ 202 local level=$1; shift 203 local cf=/etc/rc.conf.d/rc_trace 204 205 if [ -z "$RC_LEVEL" ]; then 206 [ -f $cf ] || return 207 if [ -s $cf ]; then 208 # don't try to set RC_LEVEL without sed 209 if [ -n "$SED" ]; then 210 RC_LEVEL=$($SED -n '/^RC_LEVEL=/ { s/.*=//p;q; }' $cf) 211 RC_LEVEL=${RC_LEVEL:-0} 212 fi 213 else 214 RC_LEVEL=0 215 fi 216 fi 217 [ ${RC_LEVEL:-0} -ge ${level:-0} ] || return 218 rc_log "$@" 219} 220 221# list_vars pattern 222# List variables matching glob pattern. 223# 224list_vars() 225{ 226 # Localize 'set' option below. 227 local - 228 local IFS=$'\n' line varname 229 230 # Disable path expansion in unquoted 'for' parameters below. 231 set -o noglob 232 233 for line in $(set); do 234 varname="${line%%=*}" 235 236 case "$varname" in 237 "$line"|*[!a-zA-Z0-9_]*) 238 continue 239 ;; 240 $1) 241 echo $varname 242 ;; 243 esac 244 done 245} 246 247# set_rcvar [var] [defval] [desc] 248# 249# Echo or define a rc.conf(5) variable name. Global variable 250# $rcvars is used. 251# 252# If no argument is specified, echo "${name}_enable". 253# 254# If only a var is specified, echo "${var}_enable". 255# 256# If var and defval are specified, the ${var} is defined as 257# rc.conf(5) variable and the default value is ${defvar}. An 258# optional argument $desc can also be specified to add a 259# description for that. 260# 261set_rcvar() 262{ 263 local _var 264 265 case $# in 266 0) echo ${name}_enable ;; 267 1) echo ${1}_enable ;; 268 *) 269 debug "set_rcvar: \$$1=$2 is added" \ 270 " as a rc.conf(5) variable." 271 _var=$1 272 rcvars="${rcvars# } $_var" 273 eval ${_var}_defval=\"$2\" 274 shift 2 275 eval ${_var}_desc=\"$*\" 276 ;; 277 esac 278} 279 280# set_rcvar_obsolete oldvar [newvar] [msg] 281# Define obsolete variable. 282# Global variable $rcvars_obsolete is used. 283# 284set_rcvar_obsolete() 285{ 286 local _var 287 _var=$1 288 debug "set_rcvar_obsolete: \$$1(old) -> \$$2(new) is defined" 289 290 rcvars_obsolete="${rcvars_obsolete# } $1" 291 eval ${1}_newvar=\"$2\" 292 shift 2 293 eval ${_var}_obsolete_msg=\"$*\" 294} 295 296# 297# force_depend script [rcvar] 298# Force a service to start. Intended for use by services 299# to resolve dependency issues. 300# $1 - filename of script, in /etc/rc.d, to run 301# $2 - name of the script's rcvar (minus the _enable) 302# 303force_depend() 304{ 305 local _depend _dep_rcvar 306 307 _depend="$1" 308 _dep_rcvar="${2:-$1}_enable" 309 310 [ -n "$rc_fast" ] && ! checkyesno always_force_depends && 311 checkyesno $_dep_rcvar && return 0 312 313 /etc/rc.d/${_depend} forcestatus >/dev/null 2>&1 && return 0 314 315 info "${name} depends on ${_depend}, which will be forced to start." 316 if ! /etc/rc.d/${_depend} forcestart; then 317 warn "Unable to force ${_depend}. It may already be running." 318 return 1 319 fi 320} 321 322# 323# checkyesno var 324# Test $1 variable, and warn if not set to YES or NO. 325# Return 0 if it's "yes" (et al), nonzero otherwise. 326# 327checkyesno() 328{ 329 eval _value=\$${1} 330 debug "checkyesno: $1 is set to $_value." 331 case $_value in 332 333 # "yes", "true", "on", or "1" 334 [Yy][Ee][Ss]|[Tt][Rr][Uu][Ee]|[Oo][Nn]|1) 335 return 0 336 ;; 337 338 # "no", "false", "off", or "0" 339 [Nn][Oo]|[Ff][Aa][Ll][Ss][Ee]|[Oo][Ff][Ff]|0) 340 return 1 341 ;; 342 *) 343 warn "\$${1} is not set properly - see rc.conf(5)." 344 return 1 345 ;; 346 esac 347} 348 349# 350# reverse_list list 351# print the list in reverse order 352# 353reverse_list() 354{ 355 _revlist= 356 for _revfile; do 357 _revlist="$_revfile $_revlist" 358 done 359 echo $_revlist 360} 361 362# stop_boot always 363# If booting directly to multiuser or $always is enabled, 364# send SIGTERM to the parent (/etc/rc) to abort the boot. 365# Otherwise just exit. 366# 367stop_boot() 368{ 369 local always 370 371 case $1 in 372 # "yes", "true", "on", or "1" 373 [Yy][Ee][Ss]|[Tt][Rr][Uu][Ee]|[Oo][Nn]|1) 374 always=true 375 ;; 376 *) 377 always=false 378 ;; 379 esac 380 if [ "$autoboot" = yes -o "$always" = true ]; then 381 echo "ERROR: ABORTING BOOT (sending SIGTERM to parent)!" 382 kill -TERM ${RC_PID} 383 fi 384 exit 1 385} 386 387# 388# mount_critical_filesystems type 389# Go through the list of critical filesystems as provided in 390# the rc.conf(5) variable $critical_filesystems_${type}, checking 391# each one to see if it is mounted, and if it is not, mounting it. 392# 393mount_critical_filesystems() 394{ 395 eval _fslist=\$critical_filesystems_${1} 396 for _fs in $_fslist; do 397 mount | ( 398 _ismounted=false 399 while read what _on on _type type; do 400 if [ $on = $_fs ]; then 401 _ismounted=true 402 fi 403 done 404 if $_ismounted; then 405 : 406 else 407 mount $_fs >/dev/null 2>&1 408 fi 409 ) 410 done 411} 412 413# 414# check_pidfile pidfile procname [interpreter] 415# Parses the first line of pidfile for a PID, and ensures 416# that the process is running and matches procname. 417# Prints the matching PID upon success, nothing otherwise. 418# interpreter is optional; see _find_processes() for details. 419# 420check_pidfile() 421{ 422 _pidfile=$1 423 _procname=$2 424 _interpreter=$3 425 if [ -z "$_pidfile" -o -z "$_procname" ]; then 426 err 3 'USAGE: check_pidfile pidfile procname [interpreter]' 427 fi 428 if [ ! -f $_pidfile ]; then 429 debug "pid file ($_pidfile): not readable." 430 return 431 fi 432 read _pid _junk < $_pidfile 433 if [ -z "$_pid" ]; then 434 debug "pid file ($_pidfile): no pid in file." 435 return 436 fi 437 _find_processes $_procname ${_interpreter:-.} '-p '"$_pid" 438} 439 440# 441# check_process procname [interpreter] 442# Ensures that a process (or processes) named procname is running. 443# Prints a list of matching PIDs. 444# interpreter is optional; see _find_processes() for details. 445# 446check_process() 447{ 448 _procname=$1 449 _interpreter=$2 450 if [ -z "$_procname" ]; then 451 err 3 'USAGE: check_process procname [interpreter]' 452 fi 453 _find_processes $_procname ${_interpreter:-.} '-ax' 454} 455 456# 457# _find_processes procname interpreter psargs 458# Search for procname in the output of ps generated by psargs. 459# Prints the PIDs of any matching processes, space separated. 460# 461# If interpreter == ".", check the following variations of procname 462# against the first word of each command: 463# procname 464# `basename procname` 465# `basename procname` + ":" 466# "(" + `basename procname` + ")" 467# "[" + `basename procname` + "]" 468# 469# If interpreter != ".", read the first line of procname, remove the 470# leading #!, normalise whitespace, append procname, and attempt to 471# match that against each command, either as is, or with extra words 472# at the end. As an alternative, to deal with interpreted daemons 473# using perl, the basename of the interpreter plus a colon is also 474# tried as the prefix to procname. 475# 476_find_processes() 477{ 478 if [ $# -ne 3 ]; then 479 err 3 'USAGE: _find_processes procname interpreter psargs' 480 fi 481 _procname=$1 482 _interpreter=$2 483 _psargs=$3 484 485 _pref= 486 if [ $_interpreter != "." ]; then # an interpreted script 487 _script="${_chroot}${_chroot:+/}$_procname" 488 if [ -r "$_script" ]; then 489 read _interp < $_script # read interpreter name 490 case "$_interp" in 491 \#!*) 492 _interp=${_interp#\#!} # strip #! 493 set -- $_interp 494 case $1 in 495 */bin/env) 496 shift # drop env to get real name 497 ;; 498 esac 499 if [ $_interpreter != $1 ]; then 500 warn "\$command_interpreter $_interpreter != $1" 501 fi 502 ;; 503 *) 504 warn "no shebang line in $_script" 505 set -- $_interpreter 506 ;; 507 esac 508 else 509 warn "cannot read shebang line from $_script" 510 set -- $_interpreter 511 fi 512 _interp="$* $_procname" # cleanup spaces, add _procname 513 _interpbn=${1##*/} 514 _fp_args='_argv' 515 _fp_match='case "$_argv" in 516 ${_interp}|"${_interp} "*|"[${_interpbn}]"|"${_interpbn}: ${_procname}"*)' 517 else # a normal daemon 518 _procnamebn=${_procname##*/} 519 _fp_args='_arg0 _argv' 520 _fp_match='case "$_arg0" in 521 $_procname|$_procnamebn|${_procnamebn}:|"(${_procnamebn})"|"[${_procnamebn}]")' 522 fi 523 524 _proccheck="\ 525 $PS 2>/dev/null -o pid= -o jid= -o command= $_psargs"' | 526 while read _npid _jid '"$_fp_args"'; do 527 '"$_fp_match"' 528 if [ "$JID" -eq "$_jid" ]; 529 then echo -n "$_pref$_npid"; 530 _pref=" "; 531 fi 532 ;; 533 esac 534 done' 535 536# debug "in _find_processes: proccheck is ($_proccheck)." 537 eval $_proccheck 538} 539 540# sort_lite [-b] [-n] [-k POS] [-t SEP] 541# A lite version of sort(1) (supporting a few options) that can be used 542# before the real sort(1) is available (e.g., in scripts that run prior 543# to mountcritremote). Requires only shell built-in functionality. 544# 545sort_lite() 546{ 547 local funcname=sort_lite 548 local sort_sep="$IFS" sort_ignore_leading_space= 549 local sort_field=0 sort_strict_fields= sort_numeric= 550 local nitems=0 skip_leading=0 trim= 551 552 local OPTIND flag 553 while getopts bnk:t: flag; do 554 case "$flag" in 555 b) sort_ignore_leading_space=1 ;; 556 n) sort_numeric=1 sort_ignore_leading_space=1 ;; 557 k) sort_field="${OPTARG%%,*}" ;; # only up to first comma 558 # NB: Unlike sort(1) only one POS allowed 559 t) sort_sep="$OPTARG" 560 if [ ${#sort_sep} -gt 1 ]; then 561 echo "$funcname: multi-character tab \`$sort_sep'" >&2 562 return 1 563 fi 564 sort_strict_fields=1 565 ;; 566 \?) return 1 ;; 567 esac 568 done 569 shift $(( $OPTIND - 1 )) 570 571 # Create transformation pattern to trim leading text if desired 572 case "$sort_field" in 573 ""|[!0-9]*|*[!0-9.]*) 574 echo "$funcname: invalid sort field \`$sort_field'" >&2 575 return 1 576 ;; 577 *.*) 578 skip_leading=${sort_field#*.} sort_field=${sort_field%%.*} 579 while [ ${skip_leading:-0} -gt 1 ] 2> /dev/null; do 580 trim="$trim?" skip_leading=$(( $skip_leading - 1 )) 581 done 582 esac 583 584 # Copy input to series of local numbered variables 585 # NB: IFS of NULL preserves leading whitespace 586 local LINE 587 while IFS= read -r LINE || [ "$LINE" ]; do 588 nitems=$(( $nitems + 1 )) 589 local src_$nitems="$LINE" 590 done 591 592 # 593 # Sort numbered locals using insertion sort 594 # 595 local curitem curitem_orig curitem_mod curitem_haskey 596 local dest dest_orig dest_mod dest_haskey 597 local d gt n 598 local i=1 599 while [ $i -le $nitems ]; do 600 curitem_haskey=1 # Assume sort field (-k POS) exists 601 eval curitem=\"\$src_$i\" 602 curitem_mod="$curitem" # for modified comparison 603 curitem_orig="$curitem" # for original comparison 604 605 # Trim leading whitespace if desired 606 if [ "$sort_ignore_leading_space" ]; then 607 while case "$curitem_orig" in 608 [$IFS]*) : ;; *) false; esac 609 do 610 curitem_orig="${curitem_orig#?}" 611 done 612 curitem_mod="$curitem_orig" 613 fi 614 615 # Shift modified comparison value if sort field (-k POS) is > 1 616 n=$sort_field 617 while [ $n -gt 1 ]; do 618 case "$curitem_mod" in 619 *[$sort_sep]*) 620 # Cut text up-to (and incl.) first separator 621 curitem_mod="${curitem_mod#*[$sort_sep]}" 622 623 # Skip NULLs unless strict field splitting 624 [ "$sort_strict_fields" ] || 625 [ "${curitem_mod%%[$sort_sep]*}" ] || 626 [ $n -eq 2 ] || 627 continue 628 ;; 629 *) 630 # Asked for a field that doesn't exist 631 curitem_haskey= break 632 esac 633 n=$(( $n - 1 )) 634 done 635 636 # Trim trailing words if sort field >= 1 637 [ $sort_field -ge 1 -a "$sort_numeric" ] && 638 curitem_mod="${curitem_mod%%[$sort_sep]*}" 639 640 # Apply optional trim (-k POS.TRIM) to cut leading characters 641 curitem_mod="${curitem_mod#$trim}" 642 643 # Determine the type of modified comparison to use initially 644 # NB: Prefer numerical if requested but fallback to standard 645 case "$curitem_mod" in 646 ""|[!0-9]*) # NULL or begins with non-number 647 gt=">" 648 [ "$sort_numeric" ] && curitem_mod=0 649 ;; 650 *) 651 if [ "$sort_numeric" ]; then 652 gt="-gt" 653 curitem_mod="${curitem_mod%%[!0-9]*}" 654 # NB: trailing non-digits removed 655 # otherwise numeric comparison fails 656 else 657 gt=">" 658 fi 659 esac 660 661 # If first time through, short-circuit below position-search 662 if [ $i -le 1 ]; then 663 d=0 664 else 665 d=1 666 fi 667 668 # 669 # Find appropriate element position 670 # 671 while [ $d -gt 0 ] 672 do 673 dest_haskey=$curitem_haskey 674 eval dest=\"\$dest_$d\" 675 dest_mod="$dest" # for modified comparison 676 dest_orig="$dest" # for original comparison 677 678 # Trim leading whitespace if desired 679 if [ "$sort_ignore_leading_space" ]; then 680 while case "$dest_orig" in 681 [$IFS]*) : ;; *) false; esac 682 do 683 dest_orig="${dest_orig#?}" 684 done 685 dest_mod="$dest_orig" 686 fi 687 688 # Shift modified value if sort field (-k POS) is > 1 689 n=$sort_field 690 while [ $n -gt 1 ]; do 691 case "$dest_mod" in 692 *[$sort_sep]*) 693 # Cut text up-to (and incl.) 1st sep 694 dest_mod="${dest_mod#*[$sort_sep]}" 695 696 # Skip NULLs unless strict fields 697 [ "$sort_strict_fields" ] || 698 [ "${dest_mod%%[$sort_sep]*}" ] || 699 [ $n -eq 2 ] || 700 continue 701 ;; 702 *) 703 # Asked for a field that doesn't exist 704 dest_haskey= break 705 esac 706 n=$(( $n - 1 )) 707 done 708 709 # Trim trailing words if sort field >= 1 710 [ $sort_field -ge 1 -a "$sort_numeric" ] && 711 dest_mod="${dest_mod%%[$sort_sep]*}" 712 713 # Apply optional trim (-k POS.TRIM), cut leading chars 714 dest_mod="${dest_mod#$trim}" 715 716 # Determine type of modified comparison to use 717 # NB: Prefer numerical if requested, fallback to std 718 case "$dest_mod" in 719 ""|[!0-9]*) # NULL or begins with non-number 720 gt=">" 721 [ "$sort_numeric" ] && dest_mod=0 722 ;; 723 *) 724 if [ "$sort_numeric" ]; then 725 gt="-gt" 726 dest_mod="${dest_mod%%[!0-9]*}" 727 # NB: kill trailing non-digits 728 # for numeric comparison safety 729 else 730 gt=">" 731 fi 732 esac 733 734 # Break if we've found the proper element position 735 if [ "$curitem_haskey" -a "$dest_haskey" ]; then 736 if [ "$dest_mod" = "$curitem_mod" ]; then 737 [ "$dest_orig" ">" "$curitem_orig" ] && 738 break 739 elif [ "$dest_mod" $gt "$curitem_mod" ] \ 740 2> /dev/null 741 then 742 break 743 fi 744 else 745 [ "$dest_orig" ">" "$curitem_orig" ] && break 746 fi 747 748 # Break if we've hit the end 749 [ $d -ge $i ] && break 750 751 d=$(( $d + 1 )) 752 done 753 754 # Shift remaining positions forward, making room for new item 755 n=$i 756 while [ $n -ge $d ]; do 757 # Shift destination item forward one placement 758 eval dest_$(( $n + 1 ))=\"\$dest_$n\" 759 n=$(( $n - 1 )) 760 done 761 762 # Place the element 763 if [ $i -eq 1 ]; then 764 local dest_1="$curitem" 765 else 766 local dest_$d="$curitem" 767 fi 768 769 i=$(( $i + 1 )) 770 done 771 772 # Print sorted results 773 d=1 774 while [ $d -le $nitems ]; do 775 eval echo \"\$dest_$d\" 776 d=$(( $d + 1 )) 777 done 778} 779 780# 781# wait_for_pids pid [pid ...] 782# spins until none of the pids exist 783# 784wait_for_pids() 785{ 786 local _list _prefix _nlist _j 787 788 _list="$@" 789 if [ -z "$_list" ]; then 790 return 791 fi 792 _prefix= 793 while true; do 794 _nlist=""; 795 for _j in $_list; do 796 if kill -0 $_j 2>/dev/null; then 797 _nlist="${_nlist}${_nlist:+ }$_j" 798 [ -n "$_prefix" ] && sleep 1 799 fi 800 done 801 if [ -z "$_nlist" ]; then 802 break 803 fi 804 _list=$_nlist 805 echo -n ${_prefix:-"Waiting for PIDS: "}$_list 806 _prefix=", " 807 pwait $_list 2>/dev/null 808 done 809 if [ -n "$_prefix" ]; then 810 echo "." 811 fi 812} 813 814# 815# get_pidfile_from_conf string file 816# 817# Takes a string to search for in the specified file. 818# Ignores lines with traditional comment characters. 819# 820# Example: 821# 822# if get_pidfile_from_conf string file; then 823# pidfile="$_pidfile_from_conf" 824# else 825# pidfile='appropriate default' 826# fi 827# 828get_pidfile_from_conf() 829{ 830 if [ -z "$1" -o -z "$2" ]; then 831 err 3 "USAGE: get_pidfile_from_conf string file ($name)" 832 fi 833 834 local string file line 835 836 string="$1" ; file="$2" 837 838 if [ ! -s "$file" ]; then 839 err 3 "get_pidfile_from_conf: $file does not exist ($name)" 840 fi 841 842 while read line; do 843 case "$line" in 844 *[#\;]*${string}*) continue ;; 845 *${string}*) break ;; 846 esac 847 done < $file 848 849 if [ -n "$line" ]; then 850 line=${line#*/} 851 _pidfile_from_conf="/${line%%[\"\;]*}" 852 else 853 return 1 854 fi 855} 856 857# 858# check_startmsgs 859# If rc_quiet is set (usually as a result of using faststart at 860# boot time) check if rc_startmsgs is enabled. 861# 862check_startmsgs() 863{ 864 if [ -n "$rc_quiet" ]; then 865 checkyesno rc_startmsgs 866 else 867 return 0 868 fi 869} 870 871# 872# startmsg 873# Preferred method to use when displaying start messages in lieu of echo. 874# 875startmsg() 876{ 877 check_startmsgs && echo "$@" 878} 879 880# 881# run_rc_command argument 882# Search for argument in the list of supported commands, which is: 883# "start stop restart rcvar status poll ${extra_commands}" 884# If there's a match, run ${argument}_cmd or the default method 885# (see below). 886# 887# If argument has a given prefix, then change the operation as follows: 888# Prefix Operation 889# ------ --------- 890# fast Skip the pid check, and set rc_fast=yes, rc_quiet=yes 891# force Set ${rcvar} to YES, and set rc_force=yes 892# one Set ${rcvar} to YES 893# quiet Don't output some diagnostics, and set rc_quiet=yes 894# 895# The following globals are used: 896# 897# Name Needed Purpose 898# ---- ------ ------- 899# name y Name of script. 900# 901# command n Full path to command. 902# Not needed if ${rc_arg}_cmd is set for 903# each keyword. 904# 905# command_args n Optional args/shell directives for command. 906# 907# command_interpreter n If not empty, command is interpreted, so 908# call check_{pidfile,process}() appropriately. 909# 910# desc n Description of script. 911# 912# extra_commands n List of extra commands supported. 913# 914# pidfile n If set, use check_pidfile $pidfile $command, 915# otherwise use check_process $command. 916# In either case, only check if $command is set. 917# 918# procname n Process name to check for instead of $command. 919# 920# rcvar n This is checked with checkyesno to determine 921# if the action should be run. 922# 923# ${name}_program n Full path to command. 924# Meant to be used in /etc/rc.conf to override 925# ${command}. 926# 927# ${name}_chroot n Directory to chroot to before running ${command} 928# Requires /usr to be mounted. 929# 930# ${name}_chdir n Directory to cd to before running ${command} 931# (if not using ${name}_chroot). 932# 933# ${name}_cpuset n A list of CPUs to run ${command} on. 934# Requires /usr to be mounted. 935# 936# ${name}_flags n Arguments to call ${command} with. 937# NOTE: $flags from the parent environment 938# can be used to override this. 939# 940# ${name}_env n Environment variables to run ${command} with. 941# 942# ${name}_env_file n File to source variables to run ${command} with. 943# 944# ${name}_fib n Routing table number to run ${command} with. 945# 946# ${name}_nice n Nice level to run ${command} at. 947# 948# ${name}_oomprotect n Don't kill ${command} when swap space is exhausted. 949# 950# ${name}_umask n The file creation mask to run ${command} with. 951# 952# ${name}_user n User to run ${command} as, using su(1) if not 953# using ${name}_chroot. 954# Requires /usr to be mounted. 955# 956# ${name}_group n Group to run chrooted ${command} as. 957# Requires /usr to be mounted. 958# 959# ${name}_groups n Comma separated list of supplementary groups 960# to run the chrooted ${command} with. 961# Requires /usr to be mounted. 962# 963# ${name}_prepend n Command added before ${command}. 964# 965# ${name}_setup n Command executed before ${command}. 966# 967# ${name}_login_class n Login class to use, else "daemon". 968# 969# ${name}_limits n limits(1) to apply to ${command}. 970# 971# ${rc_arg}_cmd n If set, use this as the method when invoked; 972# Otherwise, use default command (see below) 973# 974# ${rc_arg}_precmd n If set, run just before performing the 975# ${rc_arg}_cmd method in the default 976# operation (i.e, after checking for required 977# bits and process (non)existence). 978# If this completes with a non-zero exit code, 979# don't run ${rc_arg}_cmd. 980# 981# ${rc_arg}_postcmd n If set, run just after performing the 982# ${rc_arg}_cmd method, if that method 983# returned a zero exit code. 984# 985# required_dirs n If set, check for the existence of the given 986# directories before running a (re)start command. 987# 988# required_files n If set, check for the readability of the given 989# files before running a (re)start command. 990# 991# required_modules n If set, ensure the given kernel modules are 992# loaded before running a (re)start command. 993# The check and possible loads are actually 994# done after start_precmd so that the modules 995# aren't loaded in vain, should the precmd 996# return a non-zero status to indicate a error. 997# If a word in the list looks like "foo:bar", 998# "foo" is the KLD file name and "bar" is the 999# module name. If a word looks like "foo~bar", 1000# "foo" is the KLD file name and "bar" is a 1001# egrep(1) pattern matching the module name. 1002# Otherwise the module name is assumed to be 1003# the same as the KLD file name, which is most 1004# common. See load_kld(). 1005# 1006# required_vars n If set, perform checkyesno on each of the 1007# listed variables before running the default 1008# (re)start command. 1009# 1010# Default behaviour for a given argument, if no override method is 1011# provided: 1012# 1013# Argument Default behaviour 1014# -------- ----------------- 1015# start if !running && checkyesno ${rcvar} 1016# ${command} 1017# 1018# stop if ${pidfile} 1019# rc_pid=$(check_pidfile $pidfile $command) 1020# else 1021# rc_pid=$(check_process $command) 1022# kill $sig_stop $rc_pid 1023# wait_for_pids $rc_pid 1024# ($sig_stop defaults to TERM.) 1025# 1026# reload Similar to stop, except use $sig_reload instead, 1027# and don't wait_for_pids. 1028# $sig_reload defaults to HUP. 1029# Note that `reload' isn't provided by default, 1030# it should be enabled via $extra_commands. 1031# 1032# restart Run `stop' then `start'. 1033# 1034# status Show if ${command} is running, etc. 1035# 1036# poll Wait for ${command} to exit. 1037# 1038# rcvar Display what rc.conf variable is used (if any). 1039# 1040# enabled Return true if the service is enabled. 1041# 1042# describe Show the service's description 1043# 1044# extracommands Show the service's extra commands 1045# 1046# Variables available to methods, and after run_rc_command() has 1047# completed: 1048# 1049# Variable Purpose 1050# -------- ------- 1051# rc_arg Argument to command, after fast/force/one processing 1052# performed 1053# 1054# rc_flags Flags to start the default command with. 1055# Defaults to ${name}_flags, unless overridden 1056# by $flags from the environment. 1057# This variable may be changed by the precmd method. 1058# 1059# rc_service Path to the service being executed, in case the service 1060# needs to re-invoke itself. 1061# 1062# rc_pid PID of command (if appropriate) 1063# 1064# rc_fast Not empty if "fast" was provided (q.v.) 1065# 1066# rc_force Not empty if "force" was provided (q.v.) 1067# 1068# rc_quiet Not empty if "quiet" was provided 1069# 1070# 1071run_rc_command() 1072{ 1073 _return=0 1074 rc_arg=$1 1075 if [ -z "$name" ]; then 1076 err 3 'run_rc_command: $name is not set.' 1077 fi 1078 1079 DebugOn rc:$name rc:$name:$rc_arg $name:$rc_arg 1080 1081 # Don't repeat the first argument when passing additional command- 1082 # line arguments to the command subroutines. 1083 # 1084 shift 1 1085 rc_extra_args="$*" 1086 1087 _rc_prefix= 1088 case "$rc_arg" in 1089 fast*) # "fast" prefix; don't check pid 1090 rc_arg=${rc_arg#fast} 1091 rc_fast=yes 1092 rc_quiet=yes 1093 ;; 1094 force*) # "force" prefix; always run 1095 rc_force=yes 1096 _rc_prefix=force 1097 rc_arg=${rc_arg#${_rc_prefix}} 1098 if [ -n "${rcvar}" ]; then 1099 eval ${rcvar}=YES 1100 fi 1101 ;; 1102 one*) # "one" prefix; set ${rcvar}=yes 1103 _rc_prefix=one 1104 rc_arg=${rc_arg#${_rc_prefix}} 1105 if [ -n "${rcvar}" ]; then 1106 eval ${rcvar}=YES 1107 fi 1108 ;; 1109 quiet*) # "quiet" prefix; omit some messages 1110 _rc_prefix=quiet 1111 rc_arg=${rc_arg#${_rc_prefix}} 1112 rc_quiet=yes 1113 ;; 1114 esac 1115 1116 eval _override_command=\$${name}_program 1117 command=${_override_command:-$command} 1118 1119 _keywords="start stop restart rcvar enable disable delete enabled describe extracommands $extra_commands" 1120 rc_pid= 1121 _pidcmd= 1122 _procname=${procname:-${command}} 1123 1124 eval _cpuset=\$${name}_cpuset 1125 1126 # Loose validation of the configured cpuset; just make sure it starts 1127 # with a number. There have also been cases in the past where a hyphen 1128 # in a service name has caused eval errors, which trickle down into 1129 # various variables; don't let a situation like that break a bunch of 1130 # services just because of cpuset(1). 1131 case "$_cpuset" in 1132 [0-9]*) ;; 1133 *) _cpuset="" ;; 1134 esac 1135 1136 _cpusetcmd= 1137 if [ -n "$_cpuset" ]; then 1138 _cpusetcmd="$CPUSET -l $_cpuset" 1139 fi 1140 1141 # setup pid check command 1142 if [ -n "$_procname" ]; then 1143 if [ -n "$pidfile" ]; then 1144 _pidcmd='rc_pid=$(check_pidfile '"$pidfile $_procname $command_interpreter"')' 1145 else 1146 _pidcmd='rc_pid=$(check_process '"$_procname $command_interpreter"')' 1147 fi 1148 _keywords="${_keywords} status poll" 1149 else 1150 if [ ! -z "${status_cmd}" ] 1151 then 1152 _keywords="${_keywords} status" 1153 fi 1154 fi 1155 1156 if [ -z "$rc_arg" ]; then 1157 rc_usage $_keywords 1158 fi 1159 1160 if [ "$rc_arg" = "enabled" ] ; then 1161 checkyesno ${rcvar} 1162 return $? 1163 fi 1164 1165 if [ -n "$flags" ]; then # allow override from environment 1166 rc_flags=$flags 1167 else 1168 eval rc_flags=\$${name}_flags 1169 fi 1170 eval _chdir=\$${name}_chdir _chroot=\$${name}_chroot \ 1171 _nice=\$${name}_nice _user=\$${name}_user \ 1172 _group=\$${name}_group _groups=\$${name}_groups \ 1173 _fib=\$${name}_fib _env=\$${name}_env \ 1174 _prepend=\$${name}_prepend _login_class=\${${name}_login_class:-daemon} \ 1175 _limits=\$${name}_limits _oomprotect=\$${name}_oomprotect \ 1176 _setup=\$${name}_setup _env_file=\$${name}_env_file \ 1177 _umask=\$${name}_umask 1178 1179 if [ -n "$_env_file" ] && [ -r "${_env_file}" ]; then # load env from file 1180 set -a 1181 . $_env_file 1182 set +a 1183 fi 1184 1185 if [ -n "$_user" ]; then # unset $_user if running as that user 1186 if [ "$_user" = "$(eval $IDCMD)" ]; then 1187 unset _user 1188 fi 1189 fi 1190 1191 [ -z "$autoboot" ] && eval $_pidcmd # determine the pid if necessary 1192 1193 for _elem in $_keywords; do 1194 if [ "$_elem" != "$rc_arg" ]; then 1195 continue 1196 fi 1197 # if ${rcvar} is set, $1 is not "rcvar", "describe", 1198 # "enable", "delete" or "status", and ${rc_pid} is 1199 # not set, run: 1200 # checkyesno ${rcvar} 1201 # and return if that failed 1202 # 1203 if [ -n "${rcvar}" -a "$rc_arg" != "rcvar" -a "$rc_arg" != "stop" \ 1204 -a "$rc_arg" != "delete" -a "$rc_arg" != "enable" \ 1205 -a "$rc_arg" != "describe" -a "$rc_arg" != "status" ] || 1206 [ -n "${rcvar}" -a "$rc_arg" = "stop" -a -z "${rc_pid}" ]; then 1207 if ! checkyesno ${rcvar}; then 1208 if [ -n "${rc_quiet}" ]; then 1209 return 0 1210 fi 1211 echo -n "Cannot '${rc_arg}' $name. Set ${rcvar} to " 1212 echo -n "YES in /etc/rc.conf or use 'one${rc_arg}' " 1213 echo "instead of '${rc_arg}'." 1214 return 0 1215 fi 1216 fi 1217 1218 if [ $rc_arg = "start" -a -z "$rc_fast" -a -n "$rc_pid" ]; then 1219 if [ -z "$rc_quiet" ]; then 1220 echo 1>&2 "${name} already running? " \ 1221 "(pid=$rc_pid)." 1222 fi 1223 return 1 1224 fi 1225 1226 # if there's a custom ${XXX_cmd}, 1227 # run that instead of the default 1228 # 1229 eval _cmd=\$${rc_arg}_cmd \ 1230 _precmd=\$${rc_arg}_precmd \ 1231 _postcmd=\$${rc_arg}_postcmd 1232 1233 if [ -n "$_cmd" ]; then 1234 rc_trace 1 "$_cmd" 1235 if [ -n "$_env" ]; then 1236 eval "export -- $_env" 1237 fi 1238 _run_rc_precmd || return 1 1239 _run_rc_doit "$_cpusetcmd $_cmd $rc_extra_args" || return 1 1240 _run_rc_postcmd 1241 return $_return 1242 fi 1243 1244 case "$rc_arg" in # default operations... 1245 1246 describe) 1247 if [ -n "$desc" ]; then 1248 echo "$desc" 1249 fi 1250 ;; 1251 1252 extracommands) 1253 echo "$extra_commands" 1254 ;; 1255 1256 enable) 1257 _out=$(/usr/sbin/sysrc -vs "$name" "$rcvar=YES") && 1258 echo "$name enabled in ${_out%%:*}" 1259 ;; 1260 1261 disable) 1262 _out=$(/usr/sbin/sysrc -vs "$name" "$rcvar=NO") && 1263 echo "$name disabled in ${_out%%:*}" 1264 ;; 1265 1266 delete) 1267 _files= 1268 for _file in $(sysrc -lEs "$name"); do 1269 _out=$(sysrc -Fif $_file "$rcvar") && _files="$_files $_file" 1270 done 1271 /usr/sbin/sysrc -x "$rcvar" && echo "$rcvar deleted in ${_files# }" 1272 # delete file in rc.conf.d if desired and empty. 1273 checkyesno service_delete_empty || _files= 1274 for _file in $_files; do 1275 [ "$_file" = "${_file#*/rc.conf.d/}" ] && continue 1276 [ $(/usr/bin/stat -f%z $_file) -gt 0 ] && continue 1277 /bin/rm "$_file" && echo "Empty file $_file removed" 1278 done 1279 ;; 1280 1281 status) 1282 _run_rc_precmd || return 1 1283 if [ -n "$rc_pid" ]; then 1284 echo "${name} is running as pid $rc_pid." 1285 else 1286 echo "${name} is not running." 1287 return 1 1288 fi 1289 _run_rc_postcmd 1290 ;; 1291 1292 start) 1293 if [ ! -x "${_chroot}${_chroot:+/}${command}" ]; then 1294 warn "run_rc_command: cannot run $command" 1295 return 1 1296 fi 1297 1298 if ! _run_rc_precmd; then 1299 warn "failed precmd routine for ${name}" 1300 return 1 1301 fi 1302 1303 # setup the full command to run 1304 # 1305 startmsg "Starting ${name}." 1306 if [ -n "$_chroot" ]; then 1307 _cd= 1308 _doit="\ 1309${_nice:+nice -n $_nice }\ 1310$_cpusetcmd \ 1311${_fib:+setfib -F $_fib }\ 1312${_env:+env $_env }\ 1313chroot ${_user:+-u $_user }${_group:+-g $_group }${_groups:+-G $_groups }\ 1314$_chroot $command $rc_flags $command_args" 1315 else 1316 _cd="${_chdir:+cd $_chdir && }" 1317 _doit="\ 1318${_fib:+setfib -F $_fib }\ 1319${_env:+env $_env }\ 1320$_cpusetcmd $command $rc_flags $command_args" 1321 if [ -n "$_user" ]; then 1322 _doit="su -m $_user -c 'sh -c \"$_doit\"'" 1323 fi 1324 if [ -n "$_nice" ]; then 1325 if [ -z "$_user" ]; then 1326 _doit="sh -c \"$_doit\"" 1327 fi 1328 _doit="nice -n $_nice $_doit" 1329 fi 1330 if [ -n "$_prepend" ]; then 1331 _doit="$_prepend $_doit" 1332 fi 1333 fi 1334 1335 if [ -n "$_setup" ]; then 1336 if ! _run_rc_doit "$_setup"; then 1337 warn "failed to setup ${name}" 1338 fi 1339 fi 1340 1341 # Prepend default limits 1342 _doit="$_cd limits -C $_login_class $_limits $_doit" 1343 1344 # run the full command 1345 # 1346 if ! _run_rc_doit "$_doit"; then 1347 warn "failed to start ${name}" 1348 return 1 1349 fi 1350 1351 # finally, run postcmd 1352 # 1353 _run_rc_postcmd 1354 ;; 1355 1356 stop) 1357 if [ -z "$rc_pid" ]; then 1358 [ -n "$rc_fast" ] && return 0 1359 _run_rc_notrunning 1360 return 1 1361 fi 1362 1363 _run_rc_precmd || return 1 1364 1365 # send the signal to stop 1366 # 1367 echo "Stopping ${name}." 1368 _doit=$(_run_rc_killcmd "${sig_stop:-TERM}") 1369 _run_rc_doit "$_doit" || return 1 1370 1371 # wait for the command to exit, 1372 # and run postcmd. 1373 wait_for_pids $rc_pid 1374 1375 _run_rc_postcmd 1376 ;; 1377 1378 reload) 1379 if [ -z "$rc_pid" ]; then 1380 _run_rc_notrunning 1381 return 1 1382 fi 1383 1384 _run_rc_precmd || return 1 1385 1386 _doit=$(_run_rc_killcmd "${sig_reload:-HUP}") 1387 _run_rc_doit "$_doit" || return 1 1388 1389 _run_rc_postcmd 1390 ;; 1391 1392 restart) 1393 # prevent restart being called more 1394 # than once by any given script 1395 # 1396 if ${_rc_restart_done:-false}; then 1397 return 0 1398 fi 1399 _rc_restart_done=true 1400 1401 _run_rc_precmd || return 1 1402 1403 # run those in a subshell to keep global variables 1404 ( run_rc_command ${_rc_prefix}stop $rc_extra_args ) 1405 ( run_rc_command ${_rc_prefix}start $rc_extra_args ) 1406 _return=$? 1407 [ $_return -ne 0 ] && [ -z "$rc_force" ] && return 1 1408 1409 _run_rc_postcmd 1410 ;; 1411 1412 poll) 1413 _run_rc_precmd || return 1 1414 if [ -n "$rc_pid" ]; then 1415 wait_for_pids $rc_pid 1416 fi 1417 _run_rc_postcmd 1418 ;; 1419 1420 rcvar) 1421 echo -n "# $name" 1422 if [ -n "$desc" ]; then 1423 echo " : $desc" 1424 else 1425 echo "" 1426 fi 1427 echo "#" 1428 # Get unique vars in $rcvar $rcvars 1429 for _v in $rcvar $rcvars; do 1430 case $v in 1431 $_v\ *|\ *$_v|*\ $_v\ *) ;; 1432 *) v="${v# } $_v" ;; 1433 esac 1434 done 1435 1436 # Display variables. 1437 for _v in $v; do 1438 if [ -z "$_v" ]; then 1439 continue 1440 fi 1441 1442 eval _desc=\$${_v}_desc 1443 eval _defval=\$${_v}_defval 1444 _h="-" 1445 1446 eval echo \"$_v=\\\"\$$_v\\\"\" 1447 # decode multiple lines of _desc 1448 while [ -n "$_desc" ]; do 1449 case $_desc in 1450 *^^*) 1451 echo "# $_h ${_desc%%^^*}" 1452 _desc=${_desc#*^^} 1453 _h=" " 1454 ;; 1455 *) 1456 echo "# $_h ${_desc}" 1457 break 1458 ;; 1459 esac 1460 done 1461 echo "# (default: \"$_defval\")" 1462 done 1463 echo "" 1464 ;; 1465 1466 *) 1467 rc_usage $_keywords 1468 ;; 1469 1470 esac 1471 1472 # Apply protect(1) to the PID if ${name}_oomprotect is set. 1473 case "$rc_arg" in 1474 start) 1475 # We cannot use protect(1) inside jails. 1476 if [ -n "$_oomprotect" ] && [ -f "${PROTECT}" ] && 1477 [ "$(sysctl -n security.jail.jailed)" -eq 0 ]; then 1478 [ -z "${rc_pid}" ] && eval $_pidcmd 1479 case $_oomprotect in 1480 [Aa][Ll][Ll]) 1481 ${PROTECT} -d -i -p ${rc_pid} 1482 ;; 1483 [Yy][Ee][Ss]) 1484 ${PROTECT} -p ${rc_pid} 1485 ;; 1486 esac 1487 fi 1488 ;; 1489 esac 1490 1491 return $_return 1492 done 1493 1494 echo 1>&2 "$0: unknown directive '$rc_arg'." 1495 rc_usage $_keywords 1496 # not reached 1497} 1498 1499# 1500# Helper functions for run_rc_command: common code. 1501# They use such global variables besides the exported rc_* ones: 1502# 1503# name R/W 1504# ------------------ 1505# _precmd R 1506# _postcmd R 1507# _return W 1508# 1509_run_rc_precmd() 1510{ 1511 check_required_before "$rc_arg" || return 1 1512 1513 if [ -n "$_precmd" ]; then 1514 debug "run_rc_command: ${rc_arg}_precmd: $_precmd $rc_extra_args" 1515 eval "$_precmd $rc_extra_args" 1516 _return=$? 1517 1518 # If precmd failed and force isn't set, request exit. 1519 if [ $_return -ne 0 ] && [ -z "$rc_force" ]; then 1520 return 1 1521 fi 1522 fi 1523 1524 check_required_after "$rc_arg" || return 1 1525 1526 return 0 1527} 1528 1529_run_rc_postcmd() 1530{ 1531 if [ -n "$_postcmd" ]; then 1532 debug "run_rc_command: ${rc_arg}_postcmd: $_postcmd $rc_extra_args" 1533 eval "$_postcmd $rc_extra_args" 1534 _return=$? 1535 fi 1536 return 0 1537} 1538 1539_run_rc_doit() 1540{ 1541 local _m 1542 1543 debug "run_rc_command: doit: $*" 1544 _m=$(umask) 1545 ${_umask:+umask ${_umask}} 1546 eval "$@" 1547 _return=$? 1548 umask ${_m} 1549 1550 # If command failed and force isn't set, request exit. 1551 if [ $_return -ne 0 ] && [ -z "$rc_force" ]; then 1552 return 1 1553 fi 1554 1555 return 0 1556} 1557 1558_run_rc_notrunning() 1559{ 1560 local _pidmsg 1561 1562 if [ -n "$pidfile" ]; then 1563 _pidmsg=" (check $pidfile)." 1564 else 1565 _pidmsg= 1566 fi 1567 echo 1>&2 "${name} not running?${_pidmsg}" 1568} 1569 1570_run_rc_killcmd() 1571{ 1572 local _cmd 1573 1574 _cmd="kill -$1 $rc_pid" 1575 if [ -n "$_user" ]; then 1576 _cmd="su -m ${_user} -c 'sh -c \"${_cmd}\"'" 1577 fi 1578 echo "$_cmd" 1579} 1580 1581# 1582# run_rc_script file arg 1583# Start the script `file' with `arg', and correctly handle the 1584# return value from the script. 1585# If `file' ends with `.sh' and lives in /etc/rc.d, ignore it as it's 1586# an old-style startup file. 1587# If `file' ends with `.sh' and does not live in /etc/rc.d, it's sourced 1588# into the current environment if $rc_fast_and_loose is set; otherwise 1589# it is run as a child process. 1590# If `file' appears to be a backup or scratch file, ignore it. 1591# Otherwise if it is executable run as a child process. 1592# 1593run_rc_script() 1594{ 1595 _file=$1 1596 _arg=$2 1597 if [ -z "$_file" -o -z "$_arg" ]; then 1598 err 3 'USAGE: run_rc_script file arg' 1599 fi 1600 1601 unset name command command_args command_interpreter \ 1602 extra_commands pidfile procname \ 1603 rcvar rcvars rcvars_obsolete required_dirs required_files \ 1604 required_vars 1605 eval unset ${_arg}_cmd ${_arg}_precmd ${_arg}_postcmd 1606 1607 rc_trace 0 "$_file $_arg" 1608 # don't use it if we don't trust it 1609 is_verified $_file || return 1610 1611 rc_service="$_file" 1612 case "$_file" in 1613 /etc/rc.d/*.sh) # no longer allowed in the base 1614 warn "Ignoring old-style startup script $_file" 1615 ;; 1616 *[~#]|*.OLD|*.bak|*.orig|*,v) # scratch file; skip 1617 warn "Ignoring scratch file $_file" 1618 ;; 1619 *) # run in subshell 1620 if [ -x $_file ]; then 1621 DebugOn $_file $_file:$_arg rc:${_file##*/} rc:${_file##*/}:$_arg ${_file##*/} ${_file##*/}:$_arg 1622 1623 if [ -n "$rc_boottrace" ]; then 1624 boottrace_fn "$_file" "$_arg" 1625 elif [ -n "$rc_fast_and_loose" ]; then 1626 set $_arg; . $_file 1627 else 1628 ( trap "echo Script $_file interrupted >&2 ; kill -QUIT $$" 3 1629 trap "echo Script $_file interrupted >&2 ; exit 1" 2 1630 trap "echo Script $_file running >&2" 29 1631 set $_arg; . $_file ) 1632 fi 1633 DebugOff $_file $_file:$_arg rc:${_file##*/} rc:${_file##*/}:$_arg ${_file##*/} ${_file##*/}:$_arg 1634 fi 1635 ;; 1636 esac 1637} 1638 1639# 1640# run_rc_scripts [options] file [...] 1641# 1642# Call `run_rc_script' for each "file" unless already listed in 1643# $_rc_elem_done. 1644# 1645# Options: 1646# 1647# --arg "arg" 1648# Pass "arg" to `run_rc_script' default is $_boot. 1649# 1650# --break "marker" 1651# If any "file" matches "marker" stop processing. 1652# 1653_rc_elem_done= 1654run_rc_scripts() 1655{ 1656 local _arg=${_boot} 1657 local _rc_elem 1658 local _rc_breaks= 1659 1660 while :; do 1661 case "$1" in 1662 --arg) 1663 _arg="$2" 1664 shift 2 1665 ;; 1666 --break) 1667 _rc_breaks="$_rc_breaks $2" 1668 shift 2 1669 ;; 1670 *) 1671 break 1672 ;; 1673 esac 1674 done 1675 for _rc_elem in "$@"; do 1676 : _rc_elem=$_rc_elem 1677 case " $_rc_elem_done " in 1678 *" $_rc_elem "*) 1679 continue 1680 ;; 1681 esac 1682 run_rc_script ${_rc_elem} ${_arg} 1683 _rc_elem_done="$_rc_elem_done $_rc_elem" 1684 case " $_rc_breaks " in 1685 *" ${_rc_elem##*/} "*) 1686 break 1687 ;; 1688 esac 1689 done 1690} 1691 1692boottrace_fn() 1693{ 1694 local _file _arg 1695 _file=$1 1696 _arg=$2 1697 1698 if [ -n "$rc_fast_and_loose" ]; then 1699 boottrace_sysctl "$_file start" 1700 set $_arg; . $_file 1701 boottrace_sysctl "$_file done" 1702 else 1703 $boottrace_cmd "$_file" "$_arg" 1704 fi 1705} 1706 1707boottrace_sysctl() 1708{ 1709 ${SYSCTL} kern.boottrace.boottrace="$1" 1710} 1711 1712# 1713# load_rc_config [service] 1714# Source in the configuration file(s) for a given service. 1715# If no service is specified, only the global configuration 1716# file(s) will be loaded. 1717# 1718load_rc_config() 1719{ 1720 local _name _rcvar_val _var _defval _v _msg _new _d _dot 1721 _name=$1 1722 _dot=${load_rc_config_reader:-dot} 1723 1724 case "$_dot" in 1725 dot|[sv]dot) 1726 ;; 1727 *) warn "Ignoring invalid load_rc_config_reader" 1728 _dot=dot 1729 ;; 1730 esac 1731 case "$1" in 1732 -s|--safe) 1733 _dot=sdot 1734 _name=$2 1735 shift 1736 ;; 1737 -v|--verify) 1738 _dot=vdot 1739 _name=$2 1740 shift 1741 ;; 1742 esac 1743 1744 DebugOn rc:$_name $_name 1745 1746 if ${_rc_conf_loaded:-false}; then 1747 : 1748 else 1749 if [ -r /etc/defaults/rc.conf ]; then 1750 debug "Sourcing /etc/defaults/rc.conf" 1751 $_dot /etc/defaults/rc.conf 1752 source_rc_confs 1753 elif [ -r /etc/rc.conf ]; then 1754 debug "Sourcing /etc/rc.conf (/etc/defaults/rc.conf doesn't exist)." 1755 $_dot /etc/rc.conf 1756 fi 1757 _rc_conf_loaded=true 1758 fi 1759 1760 # If a service name was specified, attempt to load 1761 # service-specific configuration 1762 if [ -n "$_name" ] ; then 1763 for _d in /etc ${local_startup}; do 1764 _d=${_d%/rc.d} 1765 if [ -f ${_d}/rc.conf.d/"$_name" ]; then 1766 debug "Sourcing ${_d}/rc.conf.d/$_name" 1767 $_dot ${_d}/rc.conf.d/"$_name" 1768 elif [ -d ${_d}/rc.conf.d/"$_name" ] ; then 1769 local _rc 1770 for _rc in ${_d}/rc.conf.d/"$_name"/* ; do 1771 if [ -f "$_rc" ] ; then 1772 debug "Sourcing $_rc" 1773 $_dot "$_rc" 1774 fi 1775 done 1776 fi 1777 done 1778 fi 1779 1780 # Set defaults if defined. 1781 for _var in $rcvar $rcvars; do 1782 eval _defval=\$${_var}_defval 1783 if [ -n "$_defval" ]; then 1784 eval : \${$_var:=\$${_var}_defval} 1785 fi 1786 done 1787 1788 # check obsolete rc.conf variables 1789 for _var in $rcvars_obsolete; do 1790 eval _v=\$$_var 1791 eval _msg=\$${_var}_obsolete_msg 1792 eval _new=\$${_var}_newvar 1793 case $_v in 1794 "") 1795 ;; 1796 *) 1797 if [ -z "$_new" ]; then 1798 _msg="Ignored." 1799 else 1800 eval $_new=\"\$$_var\" 1801 if [ -z "$_msg" ]; then 1802 _msg="Use \$$_new instead." 1803 fi 1804 fi 1805 warn "\$$_var is obsolete. $_msg" 1806 ;; 1807 esac 1808 done 1809} 1810 1811# 1812# load_rc_config_var name var 1813# Read the rc.conf(5) var for name and set in the 1814# current shell, using load_rc_config in a subshell to prevent 1815# unwanted side effects from other variable assignments. 1816# 1817load_rc_config_var() 1818{ 1819 if [ $# -ne 2 ]; then 1820 err 3 'USAGE: load_rc_config_var name var' 1821 fi 1822 eval $(eval '( 1823 load_rc_config '$1' >/dev/null; 1824 if [ -n "${'$2'}" -o "${'$2'-UNSET}" != "UNSET" ]; then 1825 echo '$2'=\'\''${'$2'}\'\''; 1826 fi 1827 )' ) 1828} 1829 1830# 1831# rc_usage commands 1832# Print a usage string for $0, with `commands' being a list of 1833# valid commands. 1834# 1835rc_usage() 1836{ 1837 echo -n 1>&2 "Usage: $0 [fast|force|one|quiet](" 1838 1839 _sep= 1840 for _elem; do 1841 echo -n 1>&2 "$_sep$_elem" 1842 _sep="|" 1843 done 1844 echo 1>&2 ")" 1845 exit 1 1846} 1847 1848# 1849# err exitval message 1850# Display message to stderr and log to the syslog, and exit with exitval. 1851# 1852err() 1853{ 1854 exitval=$1 1855 shift 1856 1857 if [ -x /usr/bin/logger ]; then 1858 logger "$0: ERROR: $*" 1859 fi 1860 echo 1>&2 "$0: ERROR: $*" 1861 exit $exitval 1862} 1863 1864# 1865# warn message 1866# Display message to stderr and log to the syslog. 1867# 1868warn() 1869{ 1870 if [ -x /usr/bin/logger ]; then 1871 logger "$0: WARNING: $*" 1872 fi 1873 echo 1>&2 "$0: WARNING: $*" 1874} 1875 1876# 1877# info message 1878# Display informational message to stdout and log to syslog. 1879# 1880info() 1881{ 1882 case ${rc_info} in 1883 [Yy][Ee][Ss]|[Tt][Rr][Uu][Ee]|[Oo][Nn]|1) 1884 if [ -x /usr/bin/logger ]; then 1885 logger "$0: INFO: $*" 1886 fi 1887 echo "$0: INFO: $*" 1888 ;; 1889 esac 1890} 1891 1892# 1893# debug message 1894# If debugging is enabled in rc.conf output message to stderr. 1895# BEWARE that you don't call any subroutine that itself calls this 1896# function. 1897# 1898debug() 1899{ 1900 case ${rc_debug} in 1901 [Yy][Ee][Ss]|[Tt][Rr][Uu][Ee]|[Oo][Nn]|1) 1902 if [ -x /usr/bin/logger ]; then 1903 logger "$0: DEBUG: $*" 1904 fi 1905 echo 1>&2 "$0: DEBUG: $*" 1906 ;; 1907 esac 1908} 1909 1910# 1911# backup_file action file cur backup 1912# Make a backup copy of `file' into `cur', and save the previous 1913# version of `cur' as `backup'. 1914# 1915# The `action' keyword can be one of the following: 1916# 1917# add `file' is now being backed up (and is possibly 1918# being reentered into the backups system). `cur' 1919# is created. 1920# 1921# update `file' has changed and needs to be backed up. 1922# If `cur' exists, it is copied to `back' 1923# and then `file' is copied to `cur'. 1924# 1925# remove `file' is no longer being tracked by the backups 1926# system. `cur' is moved `back'. 1927# 1928# 1929backup_file() 1930{ 1931 _action=$1 1932 _file=$2 1933 _cur=$3 1934 _back=$4 1935 1936 case $_action in 1937 add|update) 1938 if [ -f $_cur ]; then 1939 cp -p $_cur $_back 1940 fi 1941 cp -p $_file $_cur 1942 chown root:wheel $_cur 1943 ;; 1944 remove) 1945 mv -f $_cur $_back 1946 ;; 1947 esac 1948} 1949 1950# make_symlink src link 1951# Make a symbolic link 'link' to src from basedir. If the 1952# directory in which link is to be created does not exist 1953# a warning will be displayed and an error will be returned. 1954# Returns 0 on success, 1 otherwise. 1955# 1956make_symlink() 1957{ 1958 local src link linkdir _me 1959 src="$1" 1960 link="$2" 1961 linkdir="`dirname $link`" 1962 _me="make_symlink()" 1963 1964 if [ -z "$src" -o -z "$link" ]; then 1965 warn "$_me: requires two arguments." 1966 return 1 1967 fi 1968 if [ ! -d "$linkdir" ]; then 1969 warn "$_me: the directory $linkdir does not exist." 1970 return 1 1971 fi 1972 if ! ln -sf $src $link; then 1973 warn "$_me: unable to make a symbolic link from $link to $src" 1974 return 1 1975 fi 1976 return 0 1977} 1978 1979# devfs_rulesets_from_file file 1980# Reads a set of devfs commands from file, and creates 1981# the specified rulesets with their rules. Returns non-zero 1982# if there was an error. 1983# 1984devfs_rulesets_from_file() 1985{ 1986 local file _err _me _opts 1987 file="$1" 1988 _me="devfs_rulesets_from_file" 1989 _err=0 1990 1991 if [ -z "$file" ]; then 1992 warn "$_me: you must specify a file" 1993 return 1 1994 fi 1995 if [ ! -e "$file" ]; then 1996 debug "$_me: no such file ($file)" 1997 return 0 1998 fi 1999 2000 # Disable globbing so that the rule patterns are not expanded 2001 # by accident with matching filesystem entries. 2002 _opts=$-; set -f 2003 2004 debug "reading rulesets from file ($file)" 2005 { while read line 2006 do 2007 case $line in 2008 \#*) 2009 continue 2010 ;; 2011 \[*\]*) 2012 rulenum=`expr "$line" : "\[.*=\([0-9]*\)\]"` 2013 if [ -z "$rulenum" ]; then 2014 warn "$_me: cannot extract rule number ($line)" 2015 _err=1 2016 break 2017 fi 2018 rulename=`expr "$line" : "\[\(.*\)=[0-9]*\]"` 2019 if [ -z "$rulename" ]; then 2020 warn "$_me: cannot extract rule name ($line)" 2021 _err=1 2022 break; 2023 fi 2024 eval $rulename=\$rulenum 2025 debug "found ruleset: $rulename=$rulenum" 2026 if ! /sbin/devfs rule -s $rulenum delset; then 2027 _err=1 2028 break 2029 fi 2030 ;; 2031 *) 2032 rulecmd="${line%%"\#*"}" 2033 # evaluate the command incase it includes 2034 # other rules 2035 if [ -n "$rulecmd" ]; then 2036 debug "adding rule ($rulecmd)" 2037 if ! eval /sbin/devfs rule -s $rulenum $rulecmd 2038 then 2039 _err=1 2040 break 2041 fi 2042 fi 2043 ;; 2044 esac 2045 if [ $_err -ne 0 ]; then 2046 debug "error in $_me" 2047 break 2048 fi 2049 done } < $file 2050 case $_opts in *f*) ;; *) set +f ;; esac 2051 return $_err 2052} 2053 2054# devfs_init_rulesets 2055# Initializes rulesets from configuration files. Returns 2056# non-zero if there was an error. 2057# 2058devfs_init_rulesets() 2059{ 2060 local file _me 2061 _me="devfs_init_rulesets" 2062 2063 # Go through this only once 2064 if [ -n "$devfs_rulesets_init" ]; then 2065 debug "$_me: devfs rulesets already initialized" 2066 return 2067 fi 2068 for file in $devfs_rulesets; do 2069 if ! devfs_rulesets_from_file $file; then 2070 warn "$_me: could not read rules from $file" 2071 return 1 2072 fi 2073 done 2074 devfs_rulesets_init=1 2075 debug "$_me: devfs rulesets initialized" 2076 return 0 2077} 2078 2079# devfs_set_ruleset ruleset [dir] 2080# Sets the default ruleset of dir to ruleset. The ruleset argument 2081# must be a ruleset name as specified in devfs.rules(5) file. 2082# Returns non-zero if it could not set it successfully. 2083# 2084devfs_set_ruleset() 2085{ 2086 local devdir rs _me 2087 [ -n "$1" ] && eval rs=\$$1 || rs= 2088 [ -n "$2" ] && devdir="-m "$2"" || devdir= 2089 _me="devfs_set_ruleset" 2090 2091 if [ -z "$rs" ]; then 2092 warn "$_me: you must specify a ruleset number" 2093 return 1 2094 fi 2095 debug "$_me: setting ruleset ($rs) on mount-point (${devdir#-m })" 2096 if ! /sbin/devfs $devdir ruleset $rs; then 2097 warn "$_me: unable to set ruleset $rs to ${devdir#-m }" 2098 return 1 2099 fi 2100 return 0 2101} 2102 2103# devfs_apply_ruleset ruleset [dir] 2104# Apply ruleset number $ruleset to the devfs mountpoint $dir. 2105# The ruleset argument must be a ruleset name as specified 2106# in a devfs.rules(5) file. Returns 0 on success or non-zero 2107# if it could not apply the ruleset. 2108# 2109devfs_apply_ruleset() 2110{ 2111 local devdir rs _me 2112 [ -n "$1" ] && eval rs=\$$1 || rs= 2113 [ -n "$2" ] && devdir="-m "$2"" || devdir= 2114 _me="devfs_apply_ruleset" 2115 2116 if [ -z "$rs" ]; then 2117 warn "$_me: you must specify a ruleset" 2118 return 1 2119 fi 2120 debug "$_me: applying ruleset ($rs) to mount-point (${devdir#-m })" 2121 if ! /sbin/devfs $devdir rule -s $rs applyset; then 2122 warn "$_me: unable to apply ruleset $rs to ${devdir#-m }" 2123 return 1 2124 fi 2125 return 0 2126} 2127 2128# devfs_domount dir [ruleset] 2129# Mount devfs on dir. If ruleset is specified it is set 2130# on the mount-point. It must also be a ruleset name as specified 2131# in a devfs.rules(5) file. Returns 0 on success. 2132# 2133devfs_domount() 2134{ 2135 local devdir rs _me 2136 devdir="$1" 2137 [ -n "$2" ] && rs=$2 || rs= 2138 _me="devfs_domount()" 2139 2140 if [ -z "$devdir" ]; then 2141 warn "$_me: you must specify a mount-point" 2142 return 1 2143 fi 2144 debug "$_me: mount-point is ($devdir), ruleset is ($rs)" 2145 if ! mount -t devfs dev "$devdir"; then 2146 warn "$_me: Unable to mount devfs on $devdir" 2147 return 1 2148 fi 2149 if [ -n "$rs" ]; then 2150 devfs_init_rulesets 2151 devfs_set_ruleset $rs $devdir 2152 devfs -m $devdir rule applyset 2153 fi 2154 return 0 2155} 2156 2157# Provide a function for normalizing the mounting of memory 2158# filesystems. This should allow the rest of the code here to remain 2159# as close as possible between 5-current and 4-stable. 2160# $1 = size 2161# $2 = mount point 2162# $3 = (optional) extra mdmfs flags 2163mount_md() 2164{ 2165 if [ -n "$3" ]; then 2166 flags="$3" 2167 fi 2168 /sbin/mdmfs $flags -s $1 ${mfs_type} $2 2169} 2170 2171# Code common to scripts that need to load a kernel module 2172# if it isn't in the kernel yet. Syntax: 2173# load_kld [-e regex] [-m module] file 2174# where -e or -m chooses the way to check if the module 2175# is already loaded: 2176# regex is egrep'd in the output from `kldstat -v', 2177# module is passed to `kldstat -m'. 2178# The default way is as though `-m file' were specified. 2179load_kld() 2180{ 2181 local _loaded _mod _opt _re 2182 2183 while getopts "e:m:" _opt; do 2184 case "$_opt" in 2185 e) _re="$OPTARG" ;; 2186 m) _mod="$OPTARG" ;; 2187 *) err 3 'USAGE: load_kld [-e regex] [-m module] file' ;; 2188 esac 2189 done 2190 shift $(($OPTIND - 1)) 2191 if [ $# -ne 1 ]; then 2192 err 3 'USAGE: load_kld [-e regex] [-m module] file' 2193 fi 2194 _mod=${_mod:-$1} 2195 _loaded=false 2196 if [ -n "$_re" ]; then 2197 if kldstat -v | egrep -q -e "$_re"; then 2198 _loaded=true 2199 fi 2200 else 2201 if kldstat -q -m "$_mod"; then 2202 _loaded=true 2203 fi 2204 fi 2205 if ! $_loaded; then 2206 if ! kldload "$1"; then 2207 warn "Unable to load kernel module $1" 2208 return 1 2209 else 2210 info "$1 kernel module loaded." 2211 if [ -f "/etc/sysctl.kld.d/$1.conf" ]; then 2212 sysctl -f "/etc/sysctl.kld.d/$1.conf" 2213 fi 2214 fi 2215 else 2216 debug "load_kld: $1 kernel module already loaded." 2217 fi 2218 return 0 2219} 2220 2221# ltr str src dst [var] 2222# Change every $src in $str to $dst. 2223# Useful when /usr is not yet mounted and we cannot use tr(1), sed(1) nor 2224# awk(1). If var is non-NULL, set it to the result. 2225ltr() 2226{ 2227 local _str _src _dst _out _com _var 2228 _str="$1" 2229 _src="$2" 2230 _dst="$3" 2231 _var="$4" 2232 _out="" 2233 2234 local IFS="${_src}" 2235 for _com in ${_str}; do 2236 if [ -z "${_out}" ]; then 2237 _out="${_com}" 2238 else 2239 _out="${_out}${_dst}${_com}" 2240 fi 2241 done 2242 if [ -n "${_var}" ]; then 2243 setvar "${_var}" "${_out}" 2244 else 2245 echo "${_out}" 2246 fi 2247} 2248 2249# Creates a list of providers for GELI encryption. 2250geli_make_list() 2251{ 2252 local devices devices2 2253 local provider mountpoint type options rest 2254 2255 # Create list of GELI providers from fstab. 2256 while read provider mountpoint type options rest ; do 2257 case ":${options}" in 2258 :*noauto*) 2259 noauto=yes 2260 ;; 2261 *) 2262 noauto=no 2263 ;; 2264 esac 2265 2266 case ":${provider}" in 2267 :#*) 2268 continue 2269 ;; 2270 *.eli) 2271 # Skip swap devices. 2272 if [ "${type}" = "swap" -o "${options}" = "sw" -o "${noauto}" = "yes" ]; then 2273 continue 2274 fi 2275 devices="${devices} ${provider}" 2276 ;; 2277 esac 2278 done < /etc/fstab 2279 2280 # Append providers from geli_devices. 2281 devices="${devices} ${geli_devices}" 2282 2283 for provider in ${devices}; do 2284 provider=${provider%.eli} 2285 provider=${provider#/dev/} 2286 devices2="${devices2} ${provider}" 2287 done 2288 2289 echo ${devices2} 2290} 2291 2292# Originally, root mount hold had to be released before mounting 2293# the root filesystem. This delayed the boot, so it was changed 2294# to only wait if the root device isn't readily available. This 2295# can result in rc scripts executing before all the devices - such 2296# as graid(8), or USB disks - can be accessed. This function can 2297# be used to explicitly wait for root mount holds to be released. 2298root_hold_wait() 2299{ 2300 local wait waited holders 2301 2302 waited=0 2303 while true; do 2304 holders="$(sysctl -n vfs.root_mount_hold)" 2305 if [ -z "${holders}" ]; then 2306 break; 2307 fi 2308 if [ ${waited} -eq 0 ]; then 2309 echo -n "Waiting ${root_hold_delay}s" \ 2310 "for the root mount holders: ${holders}" 2311 else 2312 echo -n . 2313 fi 2314 if [ ${waited} -ge ${root_hold_delay} ]; then 2315 echo 2316 break 2317 fi 2318 sleep 1 2319 waited=$(($waited + 1)) 2320 done 2321} 2322 2323# Find scripts in local_startup directories that use the old syntax 2324# 2325find_local_scripts_old() { 2326 zlist='' 2327 slist='' 2328 for dir in ${local_startup}; do 2329 if [ -d "${dir}" ]; then 2330 for file in ${dir}/[0-9]*.sh; do 2331 grep '^# PROVIDE:' $file >/dev/null 2>&1 && 2332 continue 2333 zlist="$zlist $file" 2334 done 2335 for file in ${dir}/[!0-9]*.sh; do 2336 grep '^# PROVIDE:' $file >/dev/null 2>&1 && 2337 continue 2338 slist="$slist $file" 2339 done 2340 fi 2341 done 2342} 2343 2344find_local_scripts_new() { 2345 local_rc='' 2346 for dir in ${local_startup}; do 2347 if [ -d "${dir}" ]; then 2348 for file in `grep -l '^# PROVIDE:' ${dir}/* 2>/dev/null`; do 2349 case "$file" in 2350 *.sample|*.pkgsave) ;; 2351 *) if [ -x "$file" ]; then 2352 local_rc="${local_rc} ${file}" 2353 fi 2354 ;; 2355 esac 2356 done 2357 fi 2358 done 2359} 2360 2361find_system_scripts() { 2362 system_rc='' 2363 for file in /etc/rc.d/*; do 2364 case "${file##*/}" in 2365 *.pkgsave) ;; 2366 *) if [ -x "$file" ]; then 2367 system_rc="${system_rc} ${file}" 2368 fi 2369 ;; 2370 esac 2371 done 2372} 2373 2374# check_required_{before|after} command 2375# Check for things required by the command before and after its precmd, 2376# respectively. The two separate functions are needed because some 2377# conditions should prevent precmd from being run while other things 2378# depend on precmd having already been run. 2379# 2380check_required_before() 2381{ 2382 local _f 2383 2384 case "$1" in 2385 start) 2386 for _f in $required_vars; do 2387 if ! checkyesno $_f; then 2388 warn "\$${_f} is not enabled." 2389 if [ -z "$rc_force" ]; then 2390 return 1 2391 fi 2392 fi 2393 done 2394 2395 for _f in $required_dirs; do 2396 if [ ! -d "${_f}/." ]; then 2397 warn "${_f} is not a directory." 2398 if [ -z "$rc_force" ]; then 2399 return 1 2400 fi 2401 fi 2402 done 2403 2404 for _f in $required_files; do 2405 if [ ! -r "${_f}" ]; then 2406 warn "${_f} is not readable." 2407 if [ -z "$rc_force" ]; then 2408 return 1 2409 fi 2410 fi 2411 done 2412 ;; 2413 esac 2414 2415 return 0 2416} 2417 2418check_required_after() 2419{ 2420 local _f _args 2421 2422 case "$1" in 2423 start) 2424 for _f in $required_modules; do 2425 case "${_f}" in 2426 *~*) _args="-e ${_f#*~} ${_f%%~*}" ;; 2427 *:*) _args="-m ${_f#*:} ${_f%%:*}" ;; 2428 *) _args="${_f}" ;; 2429 esac 2430 if ! load_kld ${_args}; then 2431 if [ -z "$rc_force" ]; then 2432 return 1 2433 fi 2434 fi 2435 done 2436 ;; 2437 esac 2438 2439 return 0 2440} 2441 2442# check_jail mib 2443# Return true if security.jail.$mib exists and set to 1. 2444 2445check_jail() 2446{ 2447 local _mib _v 2448 2449 _mib=$1 2450 if _v=$(${SYSCTL_N} "security.jail.$_mib" 2> /dev/null); then 2451 case $_v in 2452 1) return 0;; 2453 esac 2454 fi 2455 return 1 2456} 2457 2458# check_kern_features mib 2459# Return existence of kern.features.* sysctl MIB as true or 2460# false. The result will be cached in $_rc_cache_kern_features_ 2461# namespace. "0" means the kern.features.X exists. 2462 2463check_kern_features() 2464{ 2465 local _v 2466 2467 [ -n "$1" ] || return 1; 2468 eval _v=\$_rc_cache_kern_features_$1 2469 [ -n "$_v" ] && return "$_v"; 2470 2471 if ${SYSCTL_N} kern.features.$1 > /dev/null 2>&1; then 2472 eval _rc_cache_kern_features_$1=0 2473 return 0 2474 else 2475 eval _rc_cache_kern_features_$1=1 2476 return 1 2477 fi 2478} 2479 2480# check_namevarlist var 2481# Return "0" if ${name}_var is reserved in rc.subr. 2482 2483_rc_namevarlist="program chroot chdir env flags fib nice user group groups prepend setup" 2484check_namevarlist() 2485{ 2486 local _v 2487 2488 for _v in $_rc_namevarlist; do 2489 case $1 in 2490 $_v) return 0 ;; 2491 esac 2492 done 2493 2494 return 1 2495} 2496 2497# _echoonce var msg mode 2498# mode=0: Echo $msg if ${$var} is empty. 2499# After doing echo, a string is set to ${$var}. 2500# 2501# mode=1: Echo $msg if ${$var} is a string with non-zero length. 2502# 2503_echoonce() 2504{ 2505 local _var _msg _mode 2506 eval _var=\$$1 2507 _msg=$2 2508 _mode=$3 2509 2510 case $_mode in 2511 1) [ -n "$_var" ] && echo "$_msg" ;; 2512 *) [ -z "$_var" ] && echo -n "$_msg" && eval "$1=finished" ;; 2513 esac 2514} 2515 2516# If the loader env variable rc.debug is set, turn on debugging. rc.conf will 2517# still override this, but /etc/defaults/rc.conf can't unconditionally set this 2518# since it would undo what we've done here. 2519if kenv -q rc.debug > /dev/null ; then 2520 rc_debug=YES 2521fi 2522 2523boottrace_cmd=`command -v boottrace` 2524if [ -n "$boottrace_cmd" ] && [ "`${SYSCTL_N} -q kern.boottrace.enabled`" = "1" ]; then 2525 rc_boottrace=YES 2526fi 2527 2528SED=${SED:-$(Exists -x /usr/bin/sed /rescue/sed)} 2529 2530# Allow for local additions and overrides. 2531# Use vdot to ensure the file has not been tampered with. 2532vdot /etc/local.rc.subr 2533 2534# Avoid noise - when we do not have /usr mounted, 2535# and we cannot use safe_dot without sed. 2536if ! have basename; then 2537 basename() 2538 { 2539 local b=${1%$2} 2540 echo ${b##*/} 2541 } 2542 tty() 2543 { 2544 return 0 2545 } 2546 # we cannot use safe_dot without sed 2547 [ -z "$SED" ] && _SAFE_EVAL_SH=: 2548fi 2549# safe_eval.sh provides safe_dot - for untrusted files 2550$_SAFE_EVAL_SH vdot /libexec/safe_eval.sh 2551$_DEBUG_SH vdot /libexec/debug.sh 2552 2553# Ensure we can still operate if debug.sh and 2554# safe_eval.sh are not found. 2555if have DebugOn; then 2556 # allow DEBUG_SH to be set from loader prompt 2557 DEBUG_SH=${DEBUG_SH:-$(kenv -q DEBUG_SH)} 2558else 2559 DebugOn() { return 0; } 2560 DebugOff() { return 0; } 2561fi 2562if ! have save_dot; then 2563 safe_dot() { dot "$@"; } 2564fi 2565