1#!/bin/sh 2 3# This is rc.conf - a file full of useful variables that you can set 4# to change the default startup behavior of your system. You should 5# not edit this file! Put any overrides into one of the ${rc_conf_files} 6# instead and you will be able to update these defaults later without 7# spamming your local configuration information. 8# 9# The ${rc_conf_files} files should only contain values which override 10# values set in this file. This eases the upgrade path when defaults 11# are changed and new features are added. 12# 13# All arguments must be in double or single quotes. 14# 15# For a more detailed explanation of all the rc.conf variables, please 16# refer to the rc.conf(5) manual page. 17# 18# $FreeBSD$ 19 20############################################################## 21### Important initial Boot-time options #################### 22############################################################## 23 24# Set default value of _localbase if not previously set 25: ${_localbase:="/usr/local"} 26 27# rc_debug can't be set here without interferring with rc.subr's setting it 28# when the kenv variable rc.debug is set. 29#rc_debug="NO" # Set to YES to enable debugging output from rc.d 30rc_info="NO" # Enables display of informational messages at boot. 31rc_startmsgs="YES" # Show "Starting foo:" messages at boot 32rcshutdown_timeout="90" # Seconds to wait before terminating rc.shutdown 33early_late_divider="FILESYSTEMS" # Script that separates early/late 34 # stages of the boot process. Make sure you know 35 # the ramifications if you change this. 36 # See rc.conf(5) for more details. 37always_force_depends="NO" # Set to check that indicated dependencies are 38 # running during boot (can increase boot time). 39 40apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO). 41apmd_enable="NO" # Run apmd to handle APM event from userland. 42apmd_flags="" # Flags to apmd (if enabled). 43ddb_enable="NO" # Set to YES to load ddb scripts at boot. 44ddb_config="/etc/ddb.conf" # ddb(8) config file. 45devd_enable="YES" # Run devd, to trigger programs on device tree changes. 46devd_flags="" # Additional flags for devd(8). 47devmatch_enable="YES" # Demand load kernel modules based on device ids. 48devmatch_blocklist="" # List of modules (w/o .ko) to exclude from devmatch. 49#kld_list="" # Kernel modules to load after local disks are mounted 50kldxref_enable="YES" # Build linker.hints files with kldxref(8). 51kldxref_clobber="NO" # Overwrite old linker.hints at boot. 52kldxref_module_path="" # Override kern.module_path. A ';'-delimited list. 53powerd_enable="NO" # Run powerd to lower our power usage. 54powerd_flags="" # Flags to powerd (if enabled). 55tmpmfs="AUTO" # Set to YES to always create an mfs /tmp, NO to never 56tmpsize="20m" # Size of mfs /tmp if created 57tmpmfs_flags="-S" # Extra mdmfs options for the mfs /tmp 58varmfs="AUTO" # Set to YES to always create an mfs /var, NO to never 59varsize="32m" # Size of mfs /var if created 60varmfs_flags="-S" # Extra mount options for the mfs /var 61mfs_type="auto" # "md", "tmpfs", "auto" to prefer tmpfs with md as fallback 62populate_var="AUTO" # Set to YES to always (re)populate /var, NO to never 63cleanvar_enable="YES" # Clean the /var directory 64var_run_enable="NO" # Save/restore /var/run structure at shutdown/reboot 65var_run_autosave="NO" # Only restore /var/run structure at shutdown/reboot 66 # The user is expected to issue service var_run save to 67 # manually save the /var/run mtree 68var_run_mtree="/var/db/mtree/BSD.var-run.mtree" 69 # Where to save /var/run mtree 70local_startup="${_localbase}/etc/rc.d" # startup script dirs. 71script_name_sep=" " # Change if your startup scripts' names contain spaces 72rc_conf_files="/etc/rc.conf /etc/rc.conf.local" 73 74# ZFS support 75zfs_enable="NO" # Set to YES to automatically mount ZFS file systems 76zfskeys_enable="NO" # Set YES to autoload ZFS encryption keys 77zfs_bootonce_activate="NO" # Set YES to make successful bootonce BE permanent 78zpool_reguid="" # Set to zpools for which the GUID should be replaced 79 # upon first boot. 80zpool_upgrade="" # Set to zpools for which the version should be upgraded 81 # upon first boot. 82 83# ZFSD support 84zfsd_enable="NO" # Set to YES to automatically start the ZFS fault 85 # management daemon. 86 87gptboot_enable="YES" # GPT boot success/failure reporting. 88 89# Experimental - test before enabling 90gbde_autoattach_all="NO" # YES automatically mounts gbde devices from fstab 91gbde_devices="NO" # Devices to automatically attach (list, or AUTO) 92gbde_attach_attempts="3" # Number of times to attempt attaching gbde devices 93gbde_lockdir="/etc" # Where to look for gbde lockfiles 94 95# GELI disk encryption configuration. 96geli_devices="" # List of devices to automatically attach in addition to 97 # GELI devices listed in /etc/fstab. 98geli_groups="" # List of groups containing devices to automatically 99 # attach with the same keyfiles and passphrase 100geli_tries="" # Number of times to attempt attaching geli device. 101 # If empty, kern.geom.eli.tries will be used. 102geli_default_flags="" # Default flags for geli(8). 103geli_autodetach="YES" # Automatically detach on last close. 104 # Providers are marked as such when all file systems are 105 # mounted. 106# Example use. 107#geli_devices="da1 mirror/home" 108#geli_da1_flags="-p -k /etc/geli/da1.keys" 109#geli_da1_autodetach="NO" 110#geli_mirror_home_flags="-k /etc/geli/home.keys" 111#geli_groups="storage backup" 112#geli_storage_flags="-k /etc/geli/storage.keys" 113#geli_storage_devices="ada0 ada1" 114#geli_backup_flags="-j /etc/geli/backup.passfile -k /etc/geli/backup.keys" 115#geli_backup_devices="ada2 ada3" 116 117root_rw_mount="YES" # Set to NO to inhibit remounting root read-write. 118root_hold_delay="30" # Time to wait for root mount hold release. 119fsck_flags="-p" # May be changed to -f (or -f -y) to force a full fsck 120fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails. 121fsck_y_flags="-T ffs:-R -T ufs:-R" # Additional flags for fsck -y 122background_fsck="YES" # Attempt to run fsck in the background where possible. 123background_fsck_delay="60" # Time to wait (seconds) before starting the fsck. 124growfs_enable="NO" # Set to YES to attempt to grow the root filesystem on boot 125netfs_types="nfs:NFS smbfs:SMB" # Net filesystems. 126extra_netfs_types="NO" # List of network extra filesystem types for delayed 127 # mount at startup (or NO). 128 129############################################################## 130### Network configuration sub-section ###################### 131############################################################## 132 133### Basic network and firewall/security options: ### 134hostname="" # Set this! 135hostid_enable="YES" # Set host UUID. 136hostid_file="/etc/hostid" # File with hostuuid. 137nisdomainname="NO" # Set to NIS domain if using NIS (or NO). 138dhclient_program="/sbin/dhclient" # Path to dhcp client program. 139dhclient_flags="" # Extra flags to pass to dhcp client. 140#dhclient_flags_em0="" # Extra dhclient flags for em0 only 141background_dhclient="NO" # Start dhcp client in the background. 142#background_dhclient_em0="YES" # Start dhcp client on em0 in the background. 143synchronous_dhclient="NO" # Start dhclient directly on configured 144 # interfaces during startup. 145defaultroute_delay="30" # Time to wait for a default route on a DHCP interface. 146defaultroute_carrier_delay="5" # Time to wait for carrier while waiting for a default route. 147netif_enable="YES" # Set to YES to initialize network interfaces 148netif_ipexpand_max="2048" # Maximum number of IP addrs in a range spec. 149wpa_supplicant_program="/usr/sbin/wpa_supplicant" 150wpa_supplicant_flags="-s" # Extra flags to pass to wpa_supplicant 151wpa_supplicant_conf_file="/etc/wpa_supplicant.conf" 152# 153firewall_enable="NO" # Set to YES to enable firewall functionality 154firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall 155firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall) 156firewall_quiet="NO" # Set to YES to suppress rule display 157firewall_logging="NO" # Set to YES to enable events logging 158firewall_logif="NO" # Set to YES to create logging-pseudo interface 159firewall_flags="" # Flags passed to ipfw when type is a file 160firewall_coscripts="" # List of executables/scripts to run after 161 # firewall starts/stops 162firewall_client_net="192.0.2.0/24" # IPv4 Network address for "client" 163 # firewall. 164#firewall_client_net_ipv6="2001:db8:2:1::/64" # IPv6 network prefix for 165 # "client" firewall. 166firewall_simple_iif="em1" # Inside network interface for "simple" 167 # firewall. 168firewall_simple_inet="192.0.2.16/28" # Inside network address for "simple" 169 # firewall. 170firewall_simple_oif="em0" # Outside network interface for "simple" 171 # firewall. 172firewall_simple_onet="192.0.2.0/28" # Outside network address for "simple" 173 # firewall. 174#firewall_simple_iif_ipv6="em1" # Inside IPv6 network interface for "simple" 175 # firewall. 176#firewall_simple_inet_ipv6="2001:db8:2:800::/56" # Inside IPv6 network prefix 177 # for "simple" firewall. 178#firewall_simple_oif_ipv6="em0" # Outside IPv6 network interface for "simple" 179 # firewall. 180#firewall_simple_onet_ipv6="2001:db8:2:0::/56" # Outside IPv6 network prefix 181 # for "simple" firewall. 182firewall_myservices="" # List of ports/protocols on which this host 183 # offers services for "workstation" firewall. 184firewall_allowservices="" # List of IPs which have access to 185 # $firewall_myservices for "workstation" 186 # firewall. 187firewall_trusted="" # List of IPs which have full access to this 188 # host for "workstation" firewall. 189firewall_logdeny="NO" # Set to YES to log default denied incoming 190 # packets for "workstation" firewall. 191firewall_nologports="135-139,445 1026,1027 1433,1434" # List of TCP/UDP ports 192 # for which denied incoming packets are not 193 # logged for "workstation" firewall. 194firewall_nat_enable="NO" # Enable kernel NAT (if firewall_enable == YES) 195firewall_nat_interface="" # Public interface or IPaddress to use 196firewall_nat_flags="" # Additional configuration parameters 197firewall_nat64_enable="NO" # Enable kernel NAT64 module. 198firewall_nptv6_enable="NO" # Enable kernel NPTv6 module. 199firewall_pmod_enable="NO" # Enable kernel protocols modification module. 200dummynet_enable="NO" # Load the dummynet(4) module 201ipfw_netflow_enable="NO" # Enable netflow logging via ng_netflow 202ip_portrange_first="NO" # Set first dynamically allocated port 203ip_portrange_last="NO" # Set last dynamically allocated port 204ike_enable="NO" # Enable IKE daemon (usually racoon or isakmpd) 205ike_program="${_localbase}/sbin/isakmpd" # Path to IKE daemon 206ike_flags="" # Additional flags for IKE daemon 207ipsec_enable="NO" # Set to YES to run setkey on ipsec_file 208ipsec_file="/etc/ipsec.conf" # Name of config file for setkey 209natd_program="/sbin/natd" # path to natd, if you want a different one. 210natd_enable="NO" # Enable natd (if firewall_enable == YES). 211natd_interface="" # Public interface or IPaddress to use. 212natd_flags="" # Additional flags for natd. 213ipfilter_enable="NO" # Set to YES to enable ipfilter functionality 214ipfilter_program="/sbin/ipf" # where the ipfilter program lives 215ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see 216 # /usr/src/contrib/ipfilter/rules for examples 217ipfilter_flags="" # additional flags for ipfilter 218ippool_enable="NO" # Set to YES to enable ip filter pools 219ippool_program="/sbin/ippool" # where the ippool program lives 220ippool_rules="/etc/ippool.tables" # rules definition file for ippool 221ippool_flags="" # additional flags for ippool 222ipnat_enable="NO" # Set to YES to enable ipnat functionality 223ipnat_program="/sbin/ipnat" # where the ipnat program lives 224ipnat_rules="/etc/ipnat.rules" # rules definition file for ipnat 225ipnat_flags="" # additional flags for ipnat 226ipmon_enable="NO" # Set to YES for ipmon; needs ipfilter or ipnat 227ipmon_program="/sbin/ipmon" # where the ipfilter monitor program lives 228ipmon_flags="-Ds" # typically "-Ds" or "-D /var/log/ipflog" 229ipfs_enable="NO" # Set to YES to enable saving and restoring 230 # of state tables at shutdown and boot 231ipfs_program="/sbin/ipfs" # where the ipfs program lives 232ipfs_flags="" # additional flags for ipfs 233pf_enable="NO" # Set to YES to enable packet filter (pf) 234pf_rules="/etc/pf.conf" # rules definition file for pf (nonexistent 235 # by default) 236pf_program="/sbin/pfctl" # where the pfctl program lives 237pf_flags="" # additional flags for pfctl 238pf_fallback_rules_enable="NO" # fallback if loading ruleset fails 239pf_fallback_rules="block drop log all" # rules to load on pf ruleset failure 240#pf_fallback_rules="block drop log all 241#pass quick on em4" # multi-rule 242pf_fallback_rules_file="/etc/pf-fallback.conf" # rules file on ruleset failure 243pflog_enable="NO" # Set to YES to enable packet filter logging 244pflog_logfile="/var/log/pflog" # where pflogd should store the logfile 245pflog_program="/sbin/pflogd" # where the pflogd program lives 246pflog_flags="" # additional flags for pflogd 247ftpproxy_enable="NO" # Set to YES to enable ftp-proxy(8) for pf 248ftpproxy_flags="" # additional flags for ftp-proxy(8) 249pfsync_enable="NO" # Expose pf state to other hosts for syncing 250pfsync_syncdev="" # Interface for pfsync to work through 251pfsync_syncpeer="" # IP address of pfsync peer host 252pfsync_ifconfig="" # Additional options to ifconfig(8) for pfsync 253tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions. 254log_in_vain="0" # >=1 to log connects to ports w/o listeners. 255tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO). 256tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN 257 # NOTE: this violates the TCP specification 258icmp_drop_redirect="auto" # Set to YES to ignore ICMP REDIRECT packets 259icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets 260network_interfaces="auto" # List of network interfaces (or "auto"). 261cloned_interfaces="" # List of cloned network interfaces to create. 262#cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config. 263#ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. 264#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry. 265#ifconfig_em0_ipv6="inet6 2001:db8:1::1 prefixlen 64" # Sample IPv6 addr entry 266#ifconfig_em0_alias0="inet6 2001:db8:2::1 prefixlen 64" # Sample IPv6 alias 267#ifconfig_em0_name="net0" # Change interface name from em0 to net0. 268#vlans_em0="101 vlan0" # vlan(4) interfaces for em0 device 269#create_args_vlan0="vlan 102" # vlan tag for vlan0 device 270#wlans_ath0="wlan0" # wlan(4) interfaces for ath0 device 271#wlandebug_wlan0="scan+auth+assoc" # Set debug flags with wlandebug(8) 272#ipv4_addrs_em0="192.168.0.1/24 192.168.1.1-5/28" # example IPv4 address entry. 273# 274#autobridge_interfaces="bridge0" # List of bridges to check 275#autobridge_bridge0="tap* vlan0" # Interface glob to automatically add to the bridge 276 277# User ppp configuration. 278ppp_enable="NO" # Start user-ppp (or NO). 279ppp_program="/usr/sbin/ppp" # Path to user-ppp program. 280ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated". 281 # For details see man page for ppp(8). Default is auto. 282ppp_nat="YES" # Use PPP's internal network address translation or NO. 283ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf. 284ppp_user="root" # Which user to run ppp as 285 286# Start multiple instances of ppp at boot time 287#ppp_profile="profile1 profile2 profile3" # Which profiles to use 288#ppp_profile1_mode="ddial" # Override ppp mode for profile1 289#ppp_profile2_nat="NO" # Override nat mode for profile2 290# profile3 uses default ppp_mode and ppp_nat 291 292### Network daemon (miscellaneous) ### 293hostapd_program="/usr/sbin/hostapd" 294hostapd_enable="NO" # Run hostap daemon. 295syslogd_enable="YES" # Run syslog daemon (or NO). 296syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one. 297syslogd_flags="-s" # Flags to syslogd (if enabled). 298syslogd_oomprotect="YES" # Don't kill syslogd when swap space is exhausted. 299altlog_proglist="" # List of chrooted applicatioins in /var 300inetd_enable="NO" # Run the network daemon dispatcher (YES/NO). 301inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one. 302inetd_flags="-wW -C 60" # Optional flags to inetd 303iscsid_enable="NO" # iSCSI initiator daemon. 304iscsictl_enable="NO" # iSCSI initiator autostart. 305iscsictl_flags="-Aa" # Optional flags to iscsictl. 306hastd_enable="NO" # Run the HAST daemon (YES/NO). 307hastd_program="/sbin/hastd" # path to hastd, if you want a different one. 308hastd_flags="" # Optional flags to hastd. 309ggated_enable="NO" # Run the ggate daemon (YES/NO). 310ggated_config="/etc/gg.exports" # ggated(8) exports file. 311ggated_flags="" # Extra parameters like which port to bind to. 312ctld_enable="NO" # CAM Target Layer / iSCSI target daemon. 313local_unbound_enable="NO" # Local caching resolver 314local_unbound_tls="NO" # Use DNS over TLS 315blacklistd_enable="NO" # Run blacklistd daemon (YES/NO). 316blacklistd_flags="" # Optional flags for blacklistd(8). 317resolv_enable="YES" # Enable resolv / resolvconf 318 319# 320# kerberos. Do not run the admin daemons on slave servers 321# 322kdc_enable="NO" # Run a kerberos 5 KDC (or NO). 323kdc_program="/usr/libexec/kdc" # path to kerberos 5 KDC 324kdc_flags="" # Additional flags to the kerberos 5 KDC 325kadmind_enable="NO" # Run kadmind (or NO) 326kadmind_program="/usr/libexec/kadmind" # path to kadmind 327kpasswdd_enable="NO" # Run kpasswdd (or NO) 328kpasswdd_program="/usr/libexec/kpasswdd" # path to kpasswdd 329kfd_enable="NO" # Run kfd (or NO) 330kfd_program="/usr/libexec/kfd" # path to kerberos 5 kfd daemon 331kfd_flags="" 332ipropd_master_enable="NO" # Run Heimdal incremental propagation daemon 333 # (master daemon). 334ipropd_master_program="/usr/libexec/ipropd-master" 335ipropd_master_flags="" # Flags to ipropd-master. 336ipropd_master_keytab="/etc/krb5.keytab" # keytab for ipropd-master. 337ipropd_master_slaves="" # slave node names used for /var/heimdal/slaves. 338ipropd_slave_enable="NO" # Run Heimdal incremental propagation daemon 339 # (slave daemon). 340ipropd_slave_program="/usr/libexec/ipropd-slave" 341ipropd_slave_flags="" # Flags to ipropd-slave. 342ipropd_slave_keytab="/etc/krb5.keytab" # keytab for ipropd-slave. 343ipropd_slave_master="" # master node name. 344 345gssd_enable="NO" # Run the gssd daemon (or NO). 346gssd_program="/usr/sbin/gssd" # Path to gssd. 347gssd_flags="" # Flags for gssd. 348 349rwhod_enable="NO" # Run the rwho daemon (or NO). 350rwhod_flags="" # Flags for rwhod 351rarpd_enable="NO" # Run rarpd (or NO). 352rarpd_flags="-a" # Flags to rarpd. 353bootparamd_enable="NO" # Run bootparamd (or NO). 354bootparamd_flags="" # Flags to bootparamd 355pppoed_enable="NO" # Run the PPP over Ethernet daemon. 356pppoed_provider="*" # Provider and ppp(8) config file entry. 357pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled). 358pppoed_interface="em0" # The interface that pppoed runs on. 359sshd_enable="NO" # Enable sshd 360sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one. 361sshd_flags="" # Additional flags for sshd. 362ftpd_enable="NO" # Enable stand-alone ftpd. 363ftpd_program="/usr/libexec/ftpd" # Path to ftpd, if you want a different one. 364ftpd_flags="" # Additional flags to stand-alone ftpd. 365 366### Network daemon (NFS): All need rpcbind_enable="YES" ### 367autofs_enable="NO" # Run autofs daemons. 368automount_flags="" # Flags to automount(8) (if autofs enabled). 369automountd_flags="" # Flags to automountd(8) (if autofs enabled). 370autounmountd_flags="" # Flags to autounmountd(8) (if autofs enabled). 371nfs_client_enable="NO" # This host is an NFS client (or NO). 372nfs_access_cache="60" # Client cache timeout in seconds 373nfs_server_enable="NO" # This host is an NFS server (or NO). 374nfs_server_flags="-u -t" # Flags to nfsd (if enabled). 375nfs_server_managegids="NO" # The NFS server maps gids for AUTH_SYS (or NO). 376nfs_server_maxio="131072" # Maximum I/O size for the nfsd. 377mountd_enable="NO" # Run mountd (or NO). 378mountd_flags="-r -S" # Flags to mountd (if NFS server enabled). 379weak_mountd_authentication="NO" # Allow non-root mount requests to be served. 380nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO). 381nfs_bufpackets="" # bufspace (in packets) for client 382rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server. 383rpc_lockd_flags="" # Flags to rpc.lockd (if enabled). 384rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server. 385rpc_statd_flags="" # Flags to rpc.statd (if enabled). 386rpcbind_enable="NO" # Run the portmapper service (YES/NO). 387rpcbind_program="/usr/sbin/rpcbind" # path to rpcbind, if you want a different one. 388rpcbind_flags="" # Flags to rpcbind (if enabled). 389rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO). 390keyserv_enable="NO" # Run the SecureRPC keyserver (or NO). 391keyserv_flags="" # Flags to keyserv (if enabled). 392nfsv4_server_enable="NO" # Enable support for NFSv4 393nfsv4_server_only="NO" # Set NFS server to NFSv4 only 394nfscbd_enable="NO" # NFSv4 client side callback daemon 395nfscbd_flags="" # Flags for nfscbd 396nfsuserd_enable="NO" # NFSv4 user/group name mapping daemon 397nfsuserd_flags="" # Flags for nfsuserd 398tlsclntd_enable="NO" # Run rpc.tlsclntd needed for NFS-over-TLS mount 399tlsclntd_flags="" # Flags for rpc.tlsclntd 400tlsservd_enable="NO" # Run rpc.tlsservd needed for NFS-over-TLS nfsd 401tlsservd_flags="" # Flags for rpc.tlsservd 402 403### Network Time Services options: ### 404ntpdate_enable="NO" # Run ntpdate to sync time on boot (or NO). 405ntpdate_program="/usr/sbin/ntpdate" # path to ntpdate, if you want a different one. 406ntpdate_flags="-b" # Flags to ntpdate (if enabled). 407ntpdate_config="/etc/ntp.conf" # ntpdate(8) configuration file 408ntpdate_hosts="" # Whitespace-separated list of ntpdate(8) servers. 409ntpd_enable="NO" # Run ntpd Network Time Protocol (or NO). 410ntpd_program="/usr/sbin/ntpd" # path to ntpd, if you want a different one. 411ntpd_config="/etc/ntp.conf" # ntpd(8) configuration file 412ntpd_sync_on_start="NO" # Sync time on ntpd startup, even if offset is high 413ntpd_flags="" # Additional flags to ntpd 414ntp_src_leapfile="/etc/ntp/leap-seconds" 415 # Initial source for ntpd leapfile 416ntp_db_leapfile="/var/db/ntpd.leap-seconds.list" 417 # Working copy (updated weekly) leapfile 418ntp_leapfile_sources="https://www.ietf.org/timezones/data/leap-seconds.list" 419 # Source from which to fetch leapfile 420ntp_leapfile_fetch_opts="-mq" # Options to use for ntp leapfile fetch, 421 # e.g. --no-verify-peer 422ntp_leapfile_expiry_days=30 # Check for new leapfile 30 days prior to 423 # expiry. 424ntp_leapfile_fetch_verbose="NO" # Be verbose during NTP leapfile fetch 425 426# Network Information Services (NIS) options: All need rpcbind_enable="YES" ### 427nis_client_enable="NO" # We're an NIS client (or NO). 428nis_client_flags="" # Flags to ypbind (if enabled). 429nis_ypset_enable="NO" # Run ypset at boot time (or NO). 430nis_ypset_flags="" # Flags to ypset (if enabled). 431nis_server_enable="NO" # We're an NIS server (or NO). 432nis_server_flags="" # Flags to ypserv (if enabled). 433nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO). 434nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled). 435nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO). 436nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled). 437nis_ypldap_enable="NO" # Run ypldap at boot time (or NO). 438nis_ypldap_flags="" # Flags to ypldap (if enabled). 439 440### SNMP daemon ### 441# Be sure to understand the security implications of running SNMP v1/v2 442# in your network. 443bsnmpd_enable="NO" # Run the SNMP daemon (or NO). 444bsnmpd_flags="" # Flags for bsnmpd. 445 446### Network routing options: ### 447defaultrouter="NO" # Set to default gateway (or NO). 448#defaultrouter_fibN="192.0.2.1" # Use this form to set a gateway for FIB N 449static_arp_pairs="" # Set to static ARP list (or leave empty). 450static_ndp_pairs="" # Set to static NDP list (or leave empty). 451static_routes="" # Set to static route list (or leave empty). 452gateway_enable="NO" # Set to YES if this host will be a gateway. 453routed_enable="NO" # Set to YES to enable a routing daemon. 454routed_program="/sbin/routed" # Name of routing daemon to use if enabled. 455routed_flags="-q" # Flags for routing daemon. 456arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL. 457forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES") 458accept_sourceroute="NO" # accept source routed packets to us 459 460### Bluetooth ### 461hcsecd_enable="NO" # Enable hcsecd(8) (or NO) 462hcsecd_config="/etc/bluetooth/hcsecd.conf" # hcsecd(8) configuration file 463 464sdpd_enable="NO" # Enable sdpd(8) (or NO) 465sdpd_control="/var/run/sdp" # sdpd(8) control socket 466sdpd_groupname="nobody" # set spdp(8) user/group to run as after 467sdpd_username="nobody" # it initializes 468 469bthidd_enable="NO" # Enable bthidd(8) (or NO) 470bthidd_config="/etc/bluetooth/bthidd.conf" # bthidd(8) configuration file 471bthidd_hids="/var/db/bthidd.hids" # bthidd(8) known HID devices file 472bthidd_evdev_support="AUTO" # AUTO depends on EVDEV_SUPPORT kernel option 473 474rfcomm_pppd_server_enable="NO" # Enable rfcomm_pppd(8) in server mode (or NO) 475rfcomm_pppd_server_profile="one two" # Profile to use from /etc/ppp/ppp.conf 476# 477#rfcomm_pppd_server_one_bdaddr="" # Override local bdaddr for 'one' 478rfcomm_pppd_server_one_channel="1" # Override local channel for 'one' 479#rfcomm_pppd_server_one_register_sp="NO" # Override SP and DUN register 480#rfcomm_pppd_server_one_register_dun="NO" # for 'one' 481# 482#rfcomm_pppd_server_two_bdaddr="" # Override local bdaddr for 'two' 483rfcomm_pppd_server_two_channel="3" # Override local channel for 'two' 484#rfcomm_pppd_server_two_register_sp="NO" # Override SP and DUN register 485#rfcomm_pppd_server_two_register_dun="NO" # for 'two' 486 487ubthidhci_enable="NO" # Switch an USB BT controller present on 488#ubthidhci_busnum="3" # bus 3 and addr 2 from HID mode to HCI mode. 489#ubthidhci_addr="2" # Check usbconfig list to find the correct 490 # numbers for your system. 491 492### Network link/usability verification options 493netwait_enable="NO" # Enable rc.d/netwait (or NO) 494#netwait_ip="" # Wait for ping response from any IP in this list. 495netwait_timeout="60" # Total number of seconds to perform pings. 496#netwait_if="" # Wait for active link on each intf in this list. 497netwait_if_timeout="30" # Total number of seconds to monitor link state. 498 499### Miscellaneous network options: ### 500icmp_bmcastecho="NO" # respond to broadcast ping packets 501 502### IPv6 options: ### 503ipv6_network_interfaces="auto" # List of IPv6 network interfaces 504 # (or "auto" or "none"). 505ipv6_activate_all_interfaces="NO" # If NO, interfaces which have no 506 # corresponding $ifconfig_IF_ipv6 is 507 # marked as IFDISABLED for security 508 # reason. 509ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO). 510#ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068) 511#ipv6_defaultrouter_fibN="2001:db8::" # Use this form to set a gateway for FIB N 512ipv6_static_routes="" # Set to static route list (or leave empty). 513#ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64 514 # route toward loopback interface. 515#ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1" 516ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway. 517ipv6_cpe_wanif="NO" # Set to the upstream interface name if this 518 # node will work as a router to forward IPv6 519 # packets not explicitly addressed to itself. 520ipv6_privacy="NO" # Use privacy address on RA-receiving IFs 521 # (RFC 4941) 522 523route6d_enable="NO" # Set to YES to enable an IPv6 routing daemon. 524route6d_program="/usr/sbin/route6d" # Name of IPv6 routing daemon. 525route6d_flags="" # Flags to IPv6 routing daemon. 526#route6d_flags="-l" # Example for route6d with only IPv6 site local 527 # addrs. 528#route6d_flags="-q" # If you want to run a routing daemon on an end 529 # node, you should stop advertisement. 530#ipv6_network_interfaces="em0 em1" # Examples for router 531 # or static configuration for end node. 532 # Choose correct prefix value. 533#ipv6_prefix_em0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr. 534#ipv6_prefix_em1="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr. 535ipv6_default_interface="NO" # Default output interface for scoped addrs. 536 # This works only with 537 # ipv6_gateway_enable="NO". 538rtsol_flags="-i" # Flags to IPv6 router solicitation. 539rtsold_enable="NO" # Set to YES to enable an IPv6 router 540 # solicitation daemon. 541rtsold_flags="-a -i" # Flags to an IPv6 router solicitation 542 # daemon. 543rtadvd_enable="NO" # Set to YES to enable an IPv6 router 544 # advertisement daemon. If set to YES, 545 # this router becomes a possible candidate 546 # IPv6 default router for local subnets. 547rtadvd_interfaces="" # Interfaces rtadvd sends RA packets. 548stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4 549 # tunneling interface. Specify this entry 550 # to enable 6to4 interface. 551stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr, 552 # to limit peer addr range. Effective value 553 # is 0-31. 554stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0. 555 # If you like, you can set "AUTO" for this. 556stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0 557ipv6_ipv4mapping="NO" # Set to "YES" to enable IPv4 mapped IPv6 addr 558 # communication. (like ::ffff:a.b.c.d) 559ip6addrctl_enable="YES" # Set to YES to enable default address selection 560ip6addrctl_verbose="NO" # Set to YES to enable verbose configuration messages 561ip6addrctl_policy="AUTO" # A pre-defined address selection policy 562 # (ipv4_prefer, ipv6_prefer, or AUTO) 563 564############################################################## 565### System console options ################################# 566############################################################## 567 568keyboard="" # keyboard device to use (default /dev/kbd0). 569keymap="NO" # keymap in /usr/share/{syscons,vt}/keymaps/* (or NO). 570keyrate="NO" # keyboard rate to: slow, normal, fast (or NO). 571keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable. 572keychange="NO" # function keys default values (or NO). 573cursor="NO" # cursor type {normal|blink|destructive} (or NO). 574scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO). 575font8x16="NO" # font 8x16 from /usr/share/{syscons,vt}/fonts/* (or NO). 576font8x14="NO" # font 8x14 from /usr/share/{syscons,vt}/fonts/* (or NO). 577font8x8="NO" # font 8x8 from /usr/share/{syscons,vt}/fonts/* (or NO). 578blanktime="300" # blank time (in seconds) or "NO" to turn it off. 579saver="NO" # screen saver: Uses /boot/kernel/${saver}_saver.ko 580moused_nondefault_enable="YES" # Treat non-default mice as enabled unless 581 # specifically overridden in rc.conf(5). 582moused_enable="NO" # Run the mouse daemon. 583moused_type="auto" # See man page for rc.conf(5) for available settings. 584moused_port="/dev/psm0" # Set to your mouse port. 585moused_flags="" # Any additional flags to moused. 586mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your 587 # language code table, specify alternative range 588 # start like mousechar_start=3, see vidcontrol(1) 589allscreens_flags="" # Set this vidcontrol mode for all virtual screens 590allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens 591 592############################################################## 593### Mail Transfer Agent (MTA) options ###################### 594############################################################## 595 596# Settings for /etc/rc.d/sendmail: 597sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO/NONE). 598 # If NONE, don't start any sendmail processes. 599sendmail_pidfile="/var/run/sendmail.pid" # sendmail pid file 600sendmail_procname="/usr/sbin/sendmail" # sendmail process name 601sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server) 602sendmail_cert_create="YES" # Create a server certificate if none (YES/NO) 603#sendmail_cert_cn="CN" # CN of the generate certificate 604sendmail_submit_enable="NO" # Start a localhost-only MTA for mail submission 605sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost" 606 # Flags for localhost-only MTA 607sendmail_outbound_enable="NO" # Dequeue stuck mail (YES/NO). 608sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only) 609sendmail_msp_queue_enable="NO" # Dequeue stuck clientmqueue mail (YES/NO). 610sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m" 611 # Flags for sendmail_msp_queue daemon. 612sendmail_rebuild_aliases="NO" # Run newaliases if necessary (YES/NO). 613 614 615############################################################## 616### Miscellaneous administrative options ################### 617############################################################## 618 619auditd_enable="NO" # Run the audit daemon. 620auditd_program="/usr/sbin/auditd" # Path to the audit daemon. 621auditd_flags="" # Which options to pass to the audit daemon. 622auditdistd_enable="NO" # Run the audit daemon. 623auditdistd_program="/usr/sbin/auditdistd" # Path to the auditdistd daemon. 624auditdistd_flags="" # Which options to pass to the auditdistd daemon. 625cron_enable="YES" # Run the periodic job daemon. 626cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled). 627cron_dst="YES" # Handle DST transitions intelligently (YES/NO) 628cron_flags="" # Which options to pass to the cron daemon. 629cfumass_enable="NO" # Create default LUN for cfumass(4). 630cfumass_dir="/var/cfumass" # File to LUN's contents. 631cfumass_image="/var/tmp/cfumass.img" # LUN's backing file path. 632lpd_enable="NO" # Run the line printer daemon. 633lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one. 634lpd_flags="" # Flags to lpd (if enabled). 635nscd_enable="NO" # Run the nsswitch caching daemon. 636chkprintcap_enable="NO" # Run chkprintcap(8) before running lpd. 637chkprintcap_flags="-d" # Create missing directories by default. 638dumpdev="AUTO" # Device to crashdump to (device name, AUTO, or NO). 639dumpon_flags="" # Options to pass to dumpon(8), followed by dumpdev. 640dumpdir="/var/crash" # Directory where crash dumps are to be stored 641savecore_enable="YES" # Extract core from dump devices if any 642savecore_flags="-m 10" # Used if dumpdev is enabled above, and present. 643 # By default, only the 10 most recent kernel dumps 644 # are saved. 645service_delete_empty="NO" # Have 'service delete' remove empty rc.conf.d files. 646crashinfo_enable="YES" # Automatically generate crash dump summary. 647crashinfo_program="/usr/sbin/crashinfo" # Script to generate crash dump summary. 648quota_enable="NO" # turn on quotas on startup (or NO). 649check_quotas="YES" # Check quotas on startup (or NO). 650quotaon_flags="-a" # Turn quotas on for all file systems (if enabled) 651quotaoff_flags="-a" # Turn quotas off for all file systems at shutdown 652quotacheck_flags="-a" # Check all file system quotas (if enabled) 653accounting_enable="NO" # Turn on process accounting (or NO). 654firstboot_sentinel="/firstboot" # Scripts with "firstboot" keyword are run if 655 # this file exists. Should be on a R/W filesystem so 656 # the file can be deleted after the boot completes. 657sysvipc_enable="NO" # Load System V IPC primitives at startup (or NO). 658linux_enable="NO" # Linux binary compatibility loaded at startup (or NO). 659linux_mounts_enable="YES" # If linux_enable is set to YES, mount Linux-specific 660 # filesystems at startup. 661clear_tmp_enable="NO" # Clear /tmp at startup. 662clear_tmp_X="YES" # Clear and recreate X11-related directories in /tmp 663ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks 664ldconfig_paths="/usr/lib/compat ${_localbase}/lib ${_localbase}/lib/compat/pkg" 665 # shared library search paths 666ldconfig32_paths="/usr/lib32 /usr/lib32/compat" 667 # 32-bit compatibility shared library search paths 668ldconfig_local_dirs="${_localbase}/libdata/ldconfig" 669 # Local directories with ldconfig configuration files. 670ldconfig_local32_dirs="${_localbase}/libdata/ldconfig32" 671 # Local directories with 32-bit compatibility ldconfig 672 # configuration files. 673kern_securelevel_enable="NO" # kernel security level (see security(7)) 674kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure 675 # Note that setting securelevel to 0 will result 676 # in the system booting with securelevel set to 1, as 677 # init(8) will raise the level when rc(8) completes. 678update_motd="YES" # update version info in /etc/motd (or NO) 679entropy_boot_file="/boot/entropy" # Set to NO to disable very early 680 # (used at early boot time) entropy caching through reboots. 681entropy_file="/entropy" # Set to NO to disable late (used when going multi-user) 682 # entropy through reboots. 683 # /var/db/entropy-file is preferred if / is not avail. 684entropy_dir="/var/db/entropy" # Set to NO to disable caching entropy via cron. 685entropy_save_sz="4096" # Size of the entropy cache files. 686entropy_save_num="8" # Number of entropy cache files to save. 687harvest_mask="511" # Entropy device harvests all but the very invasive sources. 688 # (See 'sysctl kern.random.harvest' and random(4)) 689osrelease_enable="YES" # Update /var/run/os-release on boot (or NO). 690osrelease_file="/var/run/os-release" # File to update for os-release. 691osrelease_perms="444" # Default permission for os-release file. 692dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot 693watchdogd_enable="NO" # Start the software watchdog daemon 694watchdogd_flags="" # Flags to watchdogd (if enabled) 695watchdogd_timeout="" # watchdogd timeout, overrides -t in watchdogd_flags 696watchdogd_shutdown_timeout="" # Timeout to use after watchdogd is stopped. 697 # Has effect only for system shutdown. 698 # Overrides -x in watchdogd_flags. 699devfs_rulesets="/etc/defaults/devfs.rules /etc/devfs.rules" # Files containing 700 # devfs(8) rules. 701devfs_system_ruleset="" # The name (NOT number) of a ruleset to apply to /dev 702devfs_set_rulesets="" # A list of /mount/dev=ruleset_name settings to 703 # apply (must be mounted already, i.e. fstab(5)) 704devfs_load_rulesets="YES" # Enable to always load the default rulesets 705performance_cx_lowest="NONE" # Online CPU idle state 706performance_cpu_freq="NONE" # Online CPU frequency 707economy_cx_lowest="Cmax" # Offline CPU idle state 708economy_cpu_freq="NONE" # Offline CPU frequency 709virecover_enable="YES" # Perform housekeeping for the vi(1) editor 710ugidfw_enable="NO" # Load mac_bsdextended(4) rules on boot 711bsdextended_script="/etc/rc.bsdextended" # Default mac_bsdextended(4) 712 # ruleset file. 713newsyslog_enable="YES" # Run newsyslog at startup. 714newsyslog_flags="-CN" # Newsyslog flags to create marked files 715mixer_enable="YES" # Run the sound mixer. 716opensm_enable="NO" # Opensm(8) for infiniband devices defaults to off 717 718# rctl(8) requires kernel options RACCT and RCTL 719rctl_enable="YES" # Load rctl(8) rules on boot 720rctl_rules="/etc/rctl.conf" # rctl(8) ruleset. See rctl.conf(5). 721 722iovctl_files="" # Config files for iovctl(8) 723 724############################################################## 725### Jail Configuration (see rc.conf(5) manual page) ########## 726############################################################## 727jail_enable="NO" # Set to NO to disable starting of any jails 728jail_conf="/etc/jail.conf" # Configuration file for jail(8) 729jail_confwarn="YES" # Prevent warning about obsolete per-jail configuration 730jail_parallel_start="NO" # Start jails in the background 731jail_list="" # Space separated list of names of jails 732jail_reverse_stop="NO" # Stop jails in reverse order 733 734############################################################## 735### Define source_rc_confs, the mechanism used by /etc/rc.* ## 736### scripts to source rc_conf_files overrides safely. ## 737############################################################## 738 739if [ -z "${source_rc_confs_defined}" ]; then 740 source_rc_confs_defined=yes 741 source_rc_confs() { 742 local i sourced_files 743 for i in ${rc_conf_files}; do 744 case ${sourced_files} in 745 *:$i:*) 746 ;; 747 *) 748 sourced_files="${sourced_files}:$i:" 749 if [ -r $i ]; then 750 . $i 751 fi 752 ;; 753 esac 754 done 755 # Re-do process to pick up [possibly] redefined $rc_conf_files 756 for i in ${rc_conf_files}; do 757 case ${sourced_files} in 758 *:$i:*) 759 ;; 760 *) 761 sourced_files="${sourced_files}:$i:" 762 if [ -r $i ]; then 763 . $i 764 fi 765 ;; 766 esac 767 done 768 } 769fi 770 771# Allow vendors to override FreeBSD defaults in /etc/default/rc.conf 772# without the need to carefully manage /etc/rc.conf. 773if [ -r /etc/defaults/vendor.conf ]; then 774 . /etc/defaults/vendor.conf 775fi 776