1#!/bin/sh 2 3# This is rc.conf - a file full of useful variables that you can set 4# to change the default startup behavior of your system. You should 5# not edit this file! Put any overrides into one of the ${rc_conf_files} 6# instead and you will be able to update these defaults later without 7# spamming your local configuration information. 8# 9# The ${rc_conf_files} files should only contain values which override 10# values set in this file. This eases the upgrade path when defaults 11# are changed and new features are added. 12# 13# All arguments must be in double or single quotes. 14# 15# For a more detailed explanation of all the rc.conf variables, please 16# refer to the rc.conf(5) manual page. 17# 18# $FreeBSD$ 19 20############################################################## 21### Important initial Boot-time options #################### 22############################################################## 23 24# Set default value of _localbase if not previously set 25: ${_localbase:="/usr/local"} 26 27# rc_debug can't be set here without interferring with rc.subr's setting it 28# when the kenv variable rc.debug is set. 29#rc_debug="NO" # Set to YES to enable debugging output from rc.d 30rc_info="NO" # Enables display of informational messages at boot. 31rc_startmsgs="YES" # Show "Starting foo:" messages at boot 32rcshutdown_timeout="90" # Seconds to wait before terminating rc.shutdown 33early_late_divider="FILESYSTEMS" # Script that separates early/late 34 # stages of the boot process. Make sure you know 35 # the ramifications if you change this. 36 # See rc.conf(5) for more details. 37always_force_depends="NO" # Set to check that indicated dependencies are 38 # running during boot (can increase boot time). 39 40apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO). 41apmd_enable="NO" # Run apmd to handle APM event from userland. 42apmd_flags="" # Flags to apmd (if enabled). 43ddb_enable="NO" # Set to YES to load ddb scripts at boot. 44ddb_config="/etc/ddb.conf" # ddb(8) config file. 45devd_enable="YES" # Run devd, to trigger programs on device tree changes. 46devd_flags="" # Additional flags for devd(8). 47devmatch_enable="YES" # Demand load kernel modules based on device ids. 48devmatch_blacklist="" # List of modules (w/o .ko) to exclude from devmatch. 49#kld_list="" # Kernel modules to load after local disks are mounted 50kldxref_enable="YES" # Build linker.hints files with kldxref(8). 51kldxref_clobber="NO" # Overwrite old linker.hints at boot. 52kldxref_module_path="" # Override kern.module_path. A ';'-delimited list. 53powerd_enable="NO" # Run powerd to lower our power usage. 54powerd_flags="" # Flags to powerd (if enabled). 55tmpmfs="AUTO" # Set to YES to always create an mfs /tmp, NO to never 56tmpsize="20m" # Size of mfs /tmp if created 57tmpmfs_flags="-S" # Extra mdmfs options for the mfs /tmp 58varmfs="AUTO" # Set to YES to always create an mfs /var, NO to never 59varsize="32m" # Size of mfs /var if created 60varmfs_flags="-S" # Extra mount options for the mfs /var 61mfs_type="auto" # "md", "tmpfs", "auto" to prefer tmpfs with md as fallback 62populate_var="AUTO" # Set to YES to always (re)populate /var, NO to never 63cleanvar_enable="YES" # Clean the /var directory 64local_startup="${_localbase}/etc/rc.d" # startup script dirs. 65script_name_sep=" " # Change if your startup scripts' names contain spaces 66rc_conf_files="/etc/rc.conf /etc/rc.conf.local" 67 68# ZFS support 69zfs_enable="NO" # Set to YES to automatically mount ZFS file systems 70zfs_bootonce_activate="NO" # Set YES to make successful bootonce BE permanent 71 72# ZFSD support 73zfsd_enable="NO" # Set to YES to automatically start the ZFS fault 74 # management daemon. 75 76gptboot_enable="YES" # GPT boot success/failure reporting. 77 78# Experimental - test before enabling 79gbde_autoattach_all="NO" # YES automatically mounts gbde devices from fstab 80gbde_devices="NO" # Devices to automatically attach (list, or AUTO) 81gbde_attach_attempts="3" # Number of times to attempt attaching gbde devices 82gbde_lockdir="/etc" # Where to look for gbde lockfiles 83 84# GELI disk encryption configuration. 85geli_devices="" # List of devices to automatically attach in addition to 86 # GELI devices listed in /etc/fstab. 87geli_groups="" # List of groups containing devices to automatically 88 # attach with the same keyfiles and passphrase 89geli_tries="" # Number of times to attempt attaching geli device. 90 # If empty, kern.geom.eli.tries will be used. 91geli_default_flags="" # Default flags for geli(8). 92geli_autodetach="YES" # Automatically detach on last close. 93 # Providers are marked as such when all file systems are 94 # mounted. 95# Example use. 96#geli_devices="da1 mirror/home" 97#geli_da1_flags="-p -k /etc/geli/da1.keys" 98#geli_da1_autodetach="NO" 99#geli_mirror_home_flags="-k /etc/geli/home.keys" 100#geli_groups="storage backup" 101#geli_storage_flags="-k /etc/geli/storage.keys" 102#geli_storage_devices="ada0 ada1" 103#geli_backup_flags="-j /etc/geli/backup.passfile -k /etc/geli/backup.keys" 104#geli_backup_devices="ada2 ada3" 105 106root_rw_mount="YES" # Set to NO to inhibit remounting root read-write. 107root_hold_delay="30" # Time to wait for root mount hold release. 108fsck_flags="-p" # May be changed to -f (or -f -y) to force a full fsck 109fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails. 110fsck_y_flags="-T ffs:-R -T ufs:-R" # Additional flags for fsck -y 111background_fsck="YES" # Attempt to run fsck in the background where possible. 112background_fsck_delay="60" # Time to wait (seconds) before starting the fsck. 113growfs_enable="NO" # Set to YES to attempt to grow the root filesystem on boot 114netfs_types="nfs:NFS smbfs:SMB" # Net filesystems. 115extra_netfs_types="NO" # List of network extra filesystem types for delayed 116 # mount at startup (or NO). 117 118############################################################## 119### Network configuration sub-section ###################### 120############################################################## 121 122### Basic network and firewall/security options: ### 123hostname="" # Set this! 124hostid_enable="YES" # Set host UUID. 125hostid_file="/etc/hostid" # File with hostuuid. 126nisdomainname="NO" # Set to NIS domain if using NIS (or NO). 127dhclient_program="/sbin/dhclient" # Path to dhcp client program. 128dhclient_flags="" # Extra flags to pass to dhcp client. 129#dhclient_flags_em0="" # Extra dhclient flags for em0 only 130background_dhclient="NO" # Start dhcp client in the background. 131#background_dhclient_em0="YES" # Start dhcp client on em0 in the background. 132synchronous_dhclient="NO" # Start dhclient directly on configured 133 # interfaces during startup. 134defaultroute_delay="30" # Time to wait for a default route on a DHCP interface. 135defaultroute_carrier_delay="5" # Time to wait for carrier while waiting for a default route. 136netif_enable="YES" # Set to YES to initialize network interfaces 137netif_ipexpand_max="2048" # Maximum number of IP addrs in a range spec. 138wpa_supplicant_program="/usr/sbin/wpa_supplicant" 139wpa_supplicant_flags="-s" # Extra flags to pass to wpa_supplicant 140wpa_supplicant_conf_file="/etc/wpa_supplicant.conf" 141# 142firewall_enable="NO" # Set to YES to enable firewall functionality 143firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall 144firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall) 145firewall_quiet="NO" # Set to YES to suppress rule display 146firewall_logging="NO" # Set to YES to enable events logging 147firewall_logif="NO" # Set to YES to create logging-pseudo interface 148firewall_flags="" # Flags passed to ipfw when type is a file 149firewall_coscripts="" # List of executables/scripts to run after 150 # firewall starts/stops 151firewall_client_net="192.0.2.0/24" # IPv4 Network address for "client" 152 # firewall. 153#firewall_client_net_ipv6="2001:db8:2:1::/64" # IPv6 network prefix for 154 # "client" firewall. 155firewall_simple_iif="em1" # Inside network interface for "simple" 156 # firewall. 157firewall_simple_inet="192.0.2.16/28" # Inside network address for "simple" 158 # firewall. 159firewall_simple_oif="em0" # Outside network interface for "simple" 160 # firewall. 161firewall_simple_onet="192.0.2.0/28" # Outside network address for "simple" 162 # firewall. 163#firewall_simple_iif_ipv6="em1" # Inside IPv6 network interface for "simple" 164 # firewall. 165#firewall_simple_inet_ipv6="2001:db8:2:800::/56" # Inside IPv6 network prefix 166 # for "simple" firewall. 167#firewall_simple_oif_ipv6="em0" # Outside IPv6 network interface for "simple" 168 # firewall. 169#firewall_simple_onet_ipv6="2001:db8:2:0::/56" # Outside IPv6 network prefix 170 # for "simple" firewall. 171firewall_myservices="" # List of ports/protocols on which this host 172 # offers services for "workstation" firewall. 173firewall_allowservices="" # List of IPs which have access to 174 # $firewall_myservices for "workstation" 175 # firewall. 176firewall_trusted="" # List of IPs which have full access to this 177 # host for "workstation" firewall. 178firewall_logdeny="NO" # Set to YES to log default denied incoming 179 # packets for "workstation" firewall. 180firewall_nologports="135-139,445 1026,1027 1433,1434" # List of TCP/UDP ports 181 # for which denied incoming packets are not 182 # logged for "workstation" firewall. 183firewall_nat_enable="NO" # Enable kernel NAT (if firewall_enable == YES) 184firewall_nat_interface="" # Public interface or IPaddress to use 185firewall_nat_flags="" # Additional configuration parameters 186firewall_nat64_enable="NO" # Enable kernel NAT64 module. 187firewall_nptv6_enable="NO" # Enable kernel NPTv6 module. 188firewall_pmod_enable="NO" # Enable kernel protocols modification module. 189dummynet_enable="NO" # Load the dummynet(4) module 190ipfw_netflow_enable="NO" # Enable netflow logging via ng_netflow 191ip_portrange_first="NO" # Set first dynamically allocated port 192ip_portrange_last="NO" # Set last dynamically allocated port 193ike_enable="NO" # Enable IKE daemon (usually racoon or isakmpd) 194ike_program="${_localbase}/sbin/isakmpd" # Path to IKE daemon 195ike_flags="" # Additional flags for IKE daemon 196ipsec_enable="NO" # Set to YES to run setkey on ipsec_file 197ipsec_file="/etc/ipsec.conf" # Name of config file for setkey 198natd_program="/sbin/natd" # path to natd, if you want a different one. 199natd_enable="NO" # Enable natd (if firewall_enable == YES). 200natd_interface="" # Public interface or IPaddress to use. 201natd_flags="" # Additional flags for natd. 202ipfilter_enable="NO" # Set to YES to enable ipfilter functionality 203ipfilter_program="/sbin/ipf" # where the ipfilter program lives 204ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see 205 # /usr/src/contrib/ipfilter/rules for examples 206ipfilter_flags="" # additional flags for ipfilter 207ippool_enable="NO" # Set to YES to enable ip filter pools 208ippool_program="/sbin/ippool" # where the ippool program lives 209ippool_rules="/etc/ippool.tables" # rules definition file for ippool 210ippool_flags="" # additional flags for ippool 211ipnat_enable="NO" # Set to YES to enable ipnat functionality 212ipnat_program="/sbin/ipnat" # where the ipnat program lives 213ipnat_rules="/etc/ipnat.rules" # rules definition file for ipnat 214ipnat_flags="" # additional flags for ipnat 215ipmon_enable="NO" # Set to YES for ipmon; needs ipfilter or ipnat 216ipmon_program="/sbin/ipmon" # where the ipfilter monitor program lives 217ipmon_flags="-Ds" # typically "-Ds" or "-D /var/log/ipflog" 218ipfs_enable="NO" # Set to YES to enable saving and restoring 219 # of state tables at shutdown and boot 220ipfs_program="/sbin/ipfs" # where the ipfs program lives 221ipfs_flags="" # additional flags for ipfs 222pf_enable="NO" # Set to YES to enable packet filter (pf) 223pf_rules="/etc/pf.conf" # rules definition file for pf (nonexistent 224 # by default) 225pf_program="/sbin/pfctl" # where the pfctl program lives 226pf_flags="" # additional flags for pfctl 227pflog_enable="NO" # Set to YES to enable packet filter logging 228pflog_logfile="/var/log/pflog" # where pflogd should store the logfile 229pflog_program="/sbin/pflogd" # where the pflogd program lives 230pflog_flags="" # additional flags for pflogd 231ftpproxy_enable="NO" # Set to YES to enable ftp-proxy(8) for pf 232ftpproxy_flags="" # additional flags for ftp-proxy(8) 233pfsync_enable="NO" # Expose pf state to other hosts for syncing 234pfsync_syncdev="" # Interface for pfsync to work through 235pfsync_syncpeer="" # IP address of pfsync peer host 236pfsync_ifconfig="" # Additional options to ifconfig(8) for pfsync 237tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions. 238log_in_vain="0" # >=1 to log connects to ports w/o listeners. 239tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO). 240tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN 241 # NOTE: this violates the TCP specification 242icmp_drop_redirect="auto" # Set to YES to ignore ICMP REDIRECT packets 243icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets 244network_interfaces="auto" # List of network interfaces (or "auto"). 245cloned_interfaces="" # List of cloned network interfaces to create. 246#cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config. 247#ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. 248#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry. 249#ifconfig_em0_ipv6="inet6 2001:db8:1::1 prefixlen 64" # Sample IPv6 addr entry 250#ifconfig_em0_alias0="inet6 2001:db8:2::1 prefixlen 64" # Sample IPv6 alias 251#ifconfig_em0_name="net0" # Change interface name from em0 to net0. 252#vlans_em0="101 vlan0" # vlan(4) interfaces for em0 device 253#create_args_vlan0="vlan 102" # vlan tag for vlan0 device 254#wlans_ath0="wlan0" # wlan(4) interfaces for ath0 device 255#wlandebug_wlan0="scan+auth+assoc" # Set debug flags with wlandebug(8) 256#ipv4_addrs_em0="192.168.0.1/24 192.168.1.1-5/28" # example IPv4 address entry. 257# 258#autobridge_interfaces="bridge0" # List of bridges to check 259#autobridge_bridge0="tap* vlan0" # Interface glob to automatically add to the bridge 260# 261# If you have any sppp(4) interfaces above, you might also want to set 262# the following parameters. Refer to spppcontrol(8) for their meaning. 263sppp_interfaces="" # List of sppp interfaces. 264#sppp_interfaces="...0" # example: sppp over ... 265#spppconfig_...0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'" 266 267# User ppp configuration. 268ppp_enable="NO" # Start user-ppp (or NO). 269ppp_program="/usr/sbin/ppp" # Path to user-ppp program. 270ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated". 271 # For details see man page for ppp(8). Default is auto. 272ppp_nat="YES" # Use PPP's internal network address translation or NO. 273ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf. 274ppp_user="root" # Which user to run ppp as 275 276# Start multiple instances of ppp at boot time 277#ppp_profile="profile1 profile2 profile3" # Which profiles to use 278#ppp_profile1_mode="ddial" # Override ppp mode for profile1 279#ppp_profile2_nat="NO" # Override nat mode for profile2 280# profile3 uses default ppp_mode and ppp_nat 281 282### Network daemon (miscellaneous) ### 283hostapd_program="/usr/sbin/hostapd" 284hostapd_enable="NO" # Run hostap daemon. 285syslogd_enable="YES" # Run syslog daemon (or NO). 286syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one. 287syslogd_flags="-s" # Flags to syslogd (if enabled). 288syslogd_oomprotect="YES" # Don't kill syslogd when swap space is exhausted. 289altlog_proglist="" # List of chrooted applicatioins in /var 290inetd_enable="NO" # Run the network daemon dispatcher (YES/NO). 291inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one. 292inetd_flags="-wW -C 60" # Optional flags to inetd 293iscsid_enable="NO" # iSCSI initiator daemon. 294iscsictl_enable="NO" # iSCSI initiator autostart. 295iscsictl_flags="-Aa" # Optional flags to iscsictl. 296hastd_enable="NO" # Run the HAST daemon (YES/NO). 297hastd_program="/sbin/hastd" # path to hastd, if you want a different one. 298hastd_flags="" # Optional flags to hastd. 299ctld_enable="NO" # CAM Target Layer / iSCSI target daemon. 300local_unbound_enable="NO" # Local caching resolver 301local_unbound_tls="NO" # Use DNS over TLS 302blacklistd_enable="NO" # Run blacklistd daemon (YES/NO). 303blacklistd_flags="" # Optional flags for blacklistd(8). 304resolv_enable="YES" # Enable resolv / resolvconf 305 306# 307# kerberos. Do not run the admin daemons on slave servers 308# 309kdc_enable="NO" # Run a kerberos 5 KDC (or NO). 310kdc_program="/usr/libexec/kdc" # path to kerberos 5 KDC 311kdc_flags="" # Additional flags to the kerberos 5 KDC 312kadmind_enable="NO" # Run kadmind (or NO) 313kadmind_program="/usr/libexec/kadmind" # path to kadmind 314kpasswdd_enable="NO" # Run kpasswdd (or NO) 315kpasswdd_program="/usr/libexec/kpasswdd" # path to kpasswdd 316kfd_enable="NO" # Run kfd (or NO) 317kfd_program="/usr/libexec/kfd" # path to kerberos 5 kfd daemon 318kfd_flags="" 319ipropd_master_enable="NO" # Run Heimdal incremental propagation daemon 320 # (master daemon). 321ipropd_master_program="/usr/libexec/ipropd-master" 322ipropd_master_flags="" # Flags to ipropd-master. 323ipropd_master_keytab="/etc/krb5.keytab" # keytab for ipropd-master. 324ipropd_master_slaves="" # slave node names used for /var/heimdal/slaves. 325ipropd_slave_enable="NO" # Run Heimdal incremental propagation daemon 326 # (slave daemon). 327ipropd_slave_program="/usr/libexec/ipropd-slave" 328ipropd_slave_flags="" # Flags to ipropd-slave. 329ipropd_slave_keytab="/etc/krb5.keytab" # keytab for ipropd-slave. 330ipropd_slave_master="" # master node name. 331 332gssd_enable="NO" # Run the gssd daemon (or NO). 333gssd_program="/usr/sbin/gssd" # Path to gssd. 334gssd_flags="" # Flags for gssd. 335 336rwhod_enable="NO" # Run the rwho daemon (or NO). 337rwhod_flags="" # Flags for rwhod 338rarpd_enable="NO" # Run rarpd (or NO). 339rarpd_flags="-a" # Flags to rarpd. 340bootparamd_enable="NO" # Run bootparamd (or NO). 341bootparamd_flags="" # Flags to bootparamd 342pppoed_enable="NO" # Run the PPP over Ethernet daemon. 343pppoed_provider="*" # Provider and ppp(8) config file entry. 344pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled). 345pppoed_interface="em0" # The interface that pppoed runs on. 346sshd_enable="NO" # Enable sshd 347sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one. 348sshd_flags="" # Additional flags for sshd. 349ftpd_enable="NO" # Enable stand-alone ftpd. 350ftpd_program="/usr/libexec/ftpd" # Path to ftpd, if you want a different one. 351ftpd_flags="" # Additional flags to stand-alone ftpd. 352 353### Network daemon (NFS): All need rpcbind_enable="YES" ### 354amd_enable="NO" # Run amd service with $amd_flags (or NO). 355amd_program="/usr/sbin/amd" # path to amd, if you want a different one. 356amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map" 357amd_map_program="NO" # Can be set to "ypcat -k amd.master" 358autofs_enable="NO" # Run autofs daemons. 359automount_flags="" # Flags to automount(8) (if autofs enabled). 360automountd_flags="" # Flags to automountd(8) (if autofs enabled). 361autounmountd_flags="" # Flags to autounmountd(8) (if autofs enabled). 362nfs_client_enable="NO" # This host is an NFS client (or NO). 363nfs_access_cache="60" # Client cache timeout in seconds 364nfs_server_enable="NO" # This host is an NFS server (or NO). 365nfs_server_flags="-u -t" # Flags to nfsd (if enabled). 366nfs_server_managegids="NO" # The NFS server maps gids for AUTH_SYS (or NO). 367mountd_enable="NO" # Run mountd (or NO). 368mountd_flags="-r -S" # Flags to mountd (if NFS server enabled). 369weak_mountd_authentication="NO" # Allow non-root mount requests to be served. 370nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO). 371nfs_bufpackets="" # bufspace (in packets) for client 372rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server. 373rpc_lockd_flags="" # Flags to rpc.lockd (if enabled). 374rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server. 375rpc_statd_flags="" # Flags to rpc.statd (if enabled). 376rpcbind_enable="NO" # Run the portmapper service (YES/NO). 377rpcbind_program="/usr/sbin/rpcbind" # path to rpcbind, if you want a different one. 378rpcbind_flags="" # Flags to rpcbind (if enabled). 379rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO). 380keyserv_enable="NO" # Run the SecureRPC keyserver (or NO). 381keyserv_flags="" # Flags to keyserv (if enabled). 382nfsv4_server_enable="NO" # Enable support for NFSv4 383nfsv4_server_only="NO" # Set NFS server to NFSv4 only 384nfscbd_enable="NO" # NFSv4 client side callback daemon 385nfscbd_flags="" # Flags for nfscbd 386nfsuserd_enable="NO" # NFSv4 user/group name mapping daemon 387nfsuserd_flags="" # Flags for nfsuserd 388 389### Network Time Services options: ### 390timed_enable="NO" # Run the time daemon (or NO). 391timed_flags="" # Flags to timed (if enabled). 392ntpdate_enable="NO" # Run ntpdate to sync time on boot (or NO). 393ntpdate_program="/usr/sbin/ntpdate" # path to ntpdate, if you want a different one. 394ntpdate_flags="-b" # Flags to ntpdate (if enabled). 395ntpdate_config="/etc/ntp.conf" # ntpdate(8) configuration file 396ntpdate_hosts="" # Whitespace-separated list of ntpdate(8) servers. 397ntpd_enable="NO" # Run ntpd Network Time Protocol (or NO). 398ntpd_program="/usr/sbin/ntpd" # path to ntpd, if you want a different one. 399ntpd_config="/etc/ntp.conf" # ntpd(8) configuration file 400ntpd_sync_on_start="NO" # Sync time on ntpd startup, even if offset is high 401ntpd_flags="" # Additional flags to ntpd 402ntp_src_leapfile="/etc/ntp/leap-seconds" 403 # Initial source for ntpd leapfile 404ntp_db_leapfile="/var/db/ntpd.leap-seconds.list" 405 # Working copy (updated weekly) leapfile 406ntp_leapfile_sources="https://www.ietf.org/timezones/data/leap-seconds.list" 407 # Source from which to fetch leapfile 408ntp_leapfile_fetch_opts="-mq" # Options to use for ntp leapfile fetch, 409 # e.g. --no-verify-peer 410ntp_leapfile_expiry_days=30 # Check for new leapfile 30 days prior to 411 # expiry. 412ntp_leapfile_fetch_verbose="NO" # Be verbose during NTP leapfile fetch 413 414# Network Information Services (NIS) options: All need rpcbind_enable="YES" ### 415nis_client_enable="NO" # We're an NIS client (or NO). 416nis_client_flags="" # Flags to ypbind (if enabled). 417nis_ypset_enable="NO" # Run ypset at boot time (or NO). 418nis_ypset_flags="" # Flags to ypset (if enabled). 419nis_server_enable="NO" # We're an NIS server (or NO). 420nis_server_flags="" # Flags to ypserv (if enabled). 421nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO). 422nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled). 423nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO). 424nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled). 425nis_ypldap_enable="NO" # Run ypldap at boot time (or NO). 426nis_ypldap_flags="" # Flags to ypldap (if enabled). 427 428### SNMP daemon ### 429# Be sure to understand the security implications of running SNMP v1/v2 430# in your network. 431bsnmpd_enable="NO" # Run the SNMP daemon (or NO). 432bsnmpd_flags="" # Flags for bsnmpd. 433 434### Network routing options: ### 435defaultrouter="NO" # Set to default gateway (or NO). 436static_arp_pairs="" # Set to static ARP list (or leave empty). 437static_ndp_pairs="" # Set to static NDP list (or leave empty). 438static_routes="" # Set to static route list (or leave empty). 439gateway_enable="NO" # Set to YES if this host will be a gateway. 440routed_enable="NO" # Set to YES to enable a routing daemon. 441routed_program="/sbin/routed" # Name of routing daemon to use if enabled. 442routed_flags="-q" # Flags for routing daemon. 443arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL. 444forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES") 445accept_sourceroute="NO" # accept source routed packets to us 446 447### Bluetooth ### 448hcsecd_enable="NO" # Enable hcsecd(8) (or NO) 449hcsecd_config="/etc/bluetooth/hcsecd.conf" # hcsecd(8) configuration file 450 451sdpd_enable="NO" # Enable sdpd(8) (or NO) 452sdpd_control="/var/run/sdp" # sdpd(8) control socket 453sdpd_groupname="nobody" # set spdp(8) user/group to run as after 454sdpd_username="nobody" # it initializes 455 456bthidd_enable="NO" # Enable bthidd(8) (or NO) 457bthidd_config="/etc/bluetooth/bthidd.conf" # bthidd(8) configuration file 458bthidd_hids="/var/db/bthidd.hids" # bthidd(8) known HID devices file 459bthidd_evdev_support="AUTO" # AUTO depends on EVDEV_SUPPORT kernel option 460 461rfcomm_pppd_server_enable="NO" # Enable rfcomm_pppd(8) in server mode (or NO) 462rfcomm_pppd_server_profile="one two" # Profile to use from /etc/ppp/ppp.conf 463# 464#rfcomm_pppd_server_one_bdaddr="" # Override local bdaddr for 'one' 465rfcomm_pppd_server_one_channel="1" # Override local channel for 'one' 466#rfcomm_pppd_server_one_register_sp="NO" # Override SP and DUN register 467#rfcomm_pppd_server_one_register_dun="NO" # for 'one' 468# 469#rfcomm_pppd_server_two_bdaddr="" # Override local bdaddr for 'two' 470rfcomm_pppd_server_two_channel="3" # Override local channel for 'two' 471#rfcomm_pppd_server_two_register_sp="NO" # Override SP and DUN register 472#rfcomm_pppd_server_two_register_dun="NO" # for 'two' 473 474ubthidhci_enable="NO" # Switch an USB BT controller present on 475#ubthidhci_busnum="3" # bus 3 and addr 2 from HID mode to HCI mode. 476#ubthidhci_addr="2" # Check usbconfig list to find the correct 477 # numbers for your system. 478 479### Network link/usability verification options 480netwait_enable="NO" # Enable rc.d/netwait (or NO) 481#netwait_ip="" # Wait for ping response from any IP in this list. 482netwait_timeout="60" # Total number of seconds to perform pings. 483#netwait_if="" # Wait for active link on each intf in this list. 484netwait_if_timeout="30" # Total number of seconds to monitor link state. 485 486### Miscellaneous network options: ### 487icmp_bmcastecho="NO" # respond to broadcast ping packets 488 489### IPv6 options: ### 490ipv6_network_interfaces="auto" # List of IPv6 network interfaces 491 # (or "auto" or "none"). 492ipv6_activate_all_interfaces="NO" # If NO, interfaces which have no 493 # corresponding $ifconfig_IF_ipv6 is 494 # marked as IFDISABLED for security 495 # reason. 496ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO). 497#ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068) 498ipv6_static_routes="" # Set to static route list (or leave empty). 499#ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64 500 # route toward loopback interface. 501#ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1" 502ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway. 503ipv6_cpe_wanif="NO" # Set to the upstream interface name if this 504 # node will work as a router to forward IPv6 505 # packets not explicitly addressed to itself. 506ipv6_privacy="NO" # Use privacy address on RA-receiving IFs 507 # (RFC 4941) 508 509route6d_enable="NO" # Set to YES to enable an IPv6 routing daemon. 510route6d_program="/usr/sbin/route6d" # Name of IPv6 routing daemon. 511route6d_flags="" # Flags to IPv6 routing daemon. 512#route6d_flags="-l" # Example for route6d with only IPv6 site local 513 # addrs. 514#route6d_flags="-q" # If you want to run a routing daemon on an end 515 # node, you should stop advertisement. 516#ipv6_network_interfaces="em0 em1" # Examples for router 517 # or static configuration for end node. 518 # Choose correct prefix value. 519#ipv6_prefix_em0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr. 520#ipv6_prefix_em1="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr. 521ipv6_default_interface="NO" # Default output interface for scoped addrs. 522 # This works only with 523 # ipv6_gateway_enable="NO". 524rtsol_flags="" # Flags to IPv6 router solicitation. 525rtsold_enable="NO" # Set to YES to enable an IPv6 router 526 # solicitation daemon. 527rtsold_flags="-a" # Flags to an IPv6 router solicitation 528 # daemon. 529rtadvd_enable="NO" # Set to YES to enable an IPv6 router 530 # advertisement daemon. If set to YES, 531 # this router becomes a possible candidate 532 # IPv6 default router for local subnets. 533rtadvd_interfaces="" # Interfaces rtadvd sends RA packets. 534stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4 535 # tunneling interface. Specify this entry 536 # to enable 6to4 interface. 537stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr, 538 # to limit peer addr range. Effective value 539 # is 0-31. 540stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0. 541 # If you like, you can set "AUTO" for this. 542stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0 543ipv6_ipv4mapping="NO" # Set to "YES" to enable IPv4 mapped IPv6 addr 544 # communication. (like ::ffff:a.b.c.d) 545ipv6_ipfilter_rules="/etc/ipf6.rules" # rules definition file for ipfilter, 546 # see /usr/src/contrib/ipfilter/rules 547 # for examples 548ip6addrctl_enable="YES" # Set to YES to enable default address selection 549ip6addrctl_verbose="NO" # Set to YES to enable verbose configuration messages 550ip6addrctl_policy="AUTO" # A pre-defined address selection policy 551 # (ipv4_prefer, ipv6_prefer, or AUTO) 552 553############################################################## 554### System console options ################################# 555############################################################## 556 557keyboard="" # keyboard device to use (default /dev/kbd0). 558keymap="NO" # keymap in /usr/share/{syscons,vt}/keymaps/* (or NO). 559keyrate="NO" # keyboard rate to: slow, normal, fast (or NO). 560keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable. 561keychange="NO" # function keys default values (or NO). 562cursor="NO" # cursor type {normal|blink|destructive} (or NO). 563scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO). 564font8x16="NO" # font 8x16 from /usr/share/{syscons,vt}/fonts/* (or NO). 565font8x14="NO" # font 8x14 from /usr/share/{syscons,vt}/fonts/* (or NO). 566font8x8="NO" # font 8x8 from /usr/share/{syscons,vt}/fonts/* (or NO). 567blanktime="300" # blank time (in seconds) or "NO" to turn it off. 568saver="NO" # screen saver: Uses /boot/kernel/${saver}_saver.ko 569moused_nondefault_enable="YES" # Treat non-default mice as enabled unless 570 # specifically overriden in rc.conf(5). 571moused_enable="NO" # Run the mouse daemon. 572moused_type="auto" # See man page for rc.conf(5) for available settings. 573moused_port="/dev/psm0" # Set to your mouse port. 574moused_flags="" # Any additional flags to moused. 575mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your 576 # language code table, specify alternative range 577 # start like mousechar_start=3, see vidcontrol(1) 578allscreens_flags="" # Set this vidcontrol mode for all virtual screens 579allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens 580 581############################################################## 582### Mail Transfer Agent (MTA) options ###################### 583############################################################## 584 585mta_start_script="/etc/rc.sendmail" 586 # Script to start your chosen MTA, called by /etc/rc. 587# Settings for /etc/rc.sendmail and /etc/rc.d/sendmail: 588sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO). 589sendmail_pidfile="/var/run/sendmail.pid" # sendmail pid file 590sendmail_procname="/usr/sbin/sendmail" # sendmail process name 591sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server) 592sendmail_cert_create="YES" # Create a server certificate if none (YES/NO) 593#sendmail_cert_cn="CN" # CN of the generate certificate 594sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission 595sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost" 596 # Flags for localhost-only MTA 597sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO). 598sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only) 599sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO). 600sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m" 601 # Flags for sendmail_msp_queue daemon. 602sendmail_rebuild_aliases="NO" # Run newaliases if necessary (YES/NO). 603 604 605############################################################## 606### Miscellaneous administrative options ################### 607############################################################## 608 609auditd_enable="NO" # Run the audit daemon. 610auditd_program="/usr/sbin/auditd" # Path to the audit daemon. 611auditd_flags="" # Which options to pass to the audit daemon. 612auditdistd_enable="NO" # Run the audit daemon. 613auditdistd_program="/usr/sbin/auditdistd" # Path to the auditdistd daemon. 614auditdistd_flags="" # Which options to pass to the auditdistd daemon. 615cron_enable="YES" # Run the periodic job daemon. 616cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled). 617cron_dst="YES" # Handle DST transitions intelligently (YES/NO) 618cron_flags="" # Which options to pass to the cron daemon. 619cfumass_enable="NO" # Create default LUN for cfumass(4). 620cfumass_dir="/var/cfumass" # File to LUN's contents. 621cfumass_image="/var/tmp/cfumass.img" # LUN's backing file path. 622lpd_enable="NO" # Run the line printer daemon. 623lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one. 624lpd_flags="" # Flags to lpd (if enabled). 625nscd_enable="NO" # Run the nsswitch caching daemon. 626chkprintcap_enable="NO" # Run chkprintcap(8) before running lpd. 627chkprintcap_flags="-d" # Create missing directories by default. 628dumpdev="AUTO" # Device to crashdump to (device name, AUTO, or NO). 629dumpon_flags="" # Options to pass to dumpon(8), followed by dumpdev. 630dumpdir="/var/crash" # Directory where crash dumps are to be stored 631savecore_enable="YES" # Extract core from dump devices if any 632savecore_flags="-m 10" # Used if dumpdev is enabled above, and present. 633 # By default, only the 10 most recent kernel dumps 634 # are saved. 635service_delete_empty="NO" # Have 'service delete' remove empty rc.conf.d files. 636crashinfo_enable="YES" # Automatically generate crash dump summary. 637crashinfo_program="/usr/sbin/crashinfo" # Script to generate crash dump summary. 638quota_enable="NO" # turn on quotas on startup (or NO). 639check_quotas="YES" # Check quotas on startup (or NO). 640quotaon_flags="-a" # Turn quotas on for all file systems (if enabled) 641quotaoff_flags="-a" # Turn quotas off for all file systems at shutdown 642quotacheck_flags="-a" # Check all file system quotas (if enabled) 643accounting_enable="NO" # Turn on process accounting (or NO). 644firstboot_sentinel="/firstboot" # Scripts with "firstboot" keyword are run if 645 # this file exists. Should be on a R/W filesystem so 646 # the file can be deleted after the boot completes. 647sysvipc_enable="NO" # Load System V IPC primitives at startup (or NO). 648linux_enable="NO" # Linux binary compatibility loaded at startup (or NO). 649linux_mounts_enable="YES" # If linux_enable is set to YES, mount Linux-specific 650 # filesystems at startup. 651clear_tmp_enable="NO" # Clear /tmp at startup. 652clear_tmp_X="YES" # Clear and recreate X11-related directories in /tmp 653ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks 654ldconfig_paths="/usr/lib/compat ${_localbase}/lib ${_localbase}/lib/compat/pkg" 655 # shared library search paths 656ldconfig32_paths="/usr/lib32 /usr/lib32/compat" 657 # 32-bit compatibility shared library search paths 658ldconfigsoft_paths="/usr/libsoft /usr/libsoft/compat ${_localbase}/libsoft" 659 # soft float compatibility shared library search paths 660 # Note: temporarily with extra stuff for transition 661ldconfig_local_dirs="${_localbase}/libdata/ldconfig" 662 # Local directories with ldconfig configuration files. 663ldconfig_local32_dirs="${_localbase}/libdata/ldconfig32" 664 # Local directories with 32-bit compatibility ldconfig 665 # configuration files. 666ldconfig_localsoft_dirs="${_localbase}/libdata/ldconfigsoft" 667 # Local directories with soft float compatibility ldconfig 668 # configuration files. 669kern_securelevel_enable="NO" # kernel security level (see security(7)) 670kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure 671 # Note that setting securelevel to 0 will result 672 # in the system booting with securelevel set to 1, as 673 # init(8) will raise the level when rc(8) completes. 674update_motd="YES" # update version info in /etc/motd (or NO) 675entropy_boot_file="/boot/entropy" # Set to NO to disable very early 676 # (used at early boot time) entropy caching through reboots. 677entropy_file="/entropy" # Set to NO to disable late (used when going multi-user) 678 # entropy through reboots. 679 # /var/db/entropy-file is preferred if / is not avail. 680entropy_dir="/var/db/entropy" # Set to NO to disable caching entropy via cron. 681entropy_save_sz="4096" # Size of the entropy cache files. 682entropy_save_num="8" # Number of entropy cache files to save. 683harvest_mask="511" # Entropy device harvests all but the very invasive sources. 684 # (See 'sysctl kern.random.harvest' and random(4)) 685osrelease_enable="YES" # Update /var/run/os-release on boot (or NO). 686osrelease_file="/var/run/os-release" # File to update for os-release. 687osrelease_perms="444" # Default permission for os-release file. 688dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot 689watchdogd_enable="NO" # Start the software watchdog daemon 690watchdogd_flags="" # Flags to watchdogd (if enabled) 691watchdogd_timeout="" # watchdogd timeout, overrides -t in watchdogd_flags 692watchdogd_shutdown_timeout="" # Timeout to use after watchdogd is stopped. 693 # Has effect only for system shutdown. 694 # Overrides -x in watchdogd_flags. 695devfs_rulesets="/etc/defaults/devfs.rules /etc/devfs.rules" # Files containing 696 # devfs(8) rules. 697devfs_system_ruleset="" # The name (NOT number) of a ruleset to apply to /dev 698devfs_set_rulesets="" # A list of /mount/dev=ruleset_name settings to 699 # apply (must be mounted already, i.e. fstab(5)) 700devfs_load_rulesets="YES" # Enable to always load the default rulesets 701performance_cx_lowest="NONE" # Online CPU idle state 702performance_cpu_freq="NONE" # Online CPU frequency 703economy_cx_lowest="Cmax" # Offline CPU idle state 704economy_cpu_freq="NONE" # Offline CPU frequency 705virecover_enable="YES" # Perform housekeeping for the vi(1) editor 706ugidfw_enable="NO" # Load mac_bsdextended(4) rules on boot 707bsdextended_script="/etc/rc.bsdextended" # Default mac_bsdextended(4) 708 # ruleset file. 709newsyslog_enable="YES" # Run newsyslog at startup. 710newsyslog_flags="-CN" # Newsyslog flags to create marked files 711mixer_enable="YES" # Run the sound mixer. 712opensm_enable="NO" # Opensm(8) for infiniband devices defaults to off 713 714# rctl(8) requires kernel options RACCT and RCTL 715rctl_enable="YES" # Load rctl(8) rules on boot 716rctl_rules="/etc/rctl.conf" # rctl(8) ruleset. See rctl.conf(5). 717 718iovctl_files="" # Config files for iovctl(8) 719 720############################################################## 721### Jail Configuration (see rc.conf(5) manual page) ########## 722############################################################## 723jail_enable="NO" # Set to NO to disable starting of any jails 724jail_conf="/etc/jail.conf" # Configuration file for jail(8) 725jail_confwarn="YES" # Prevent warning about obsolete per-jail configuration 726jail_parallel_start="NO" # Start jails in the background 727jail_list="" # Space separated list of names of jails 728jail_reverse_stop="NO" # Stop jails in reverse order 729 730############################################################## 731### Define source_rc_confs, the mechanism used by /etc/rc.* ## 732### scripts to source rc_conf_files overrides safely. ## 733############################################################## 734 735if [ -z "${source_rc_confs_defined}" ]; then 736 source_rc_confs_defined=yes 737 source_rc_confs() { 738 local i sourced_files 739 for i in ${rc_conf_files}; do 740 case ${sourced_files} in 741 *:$i:*) 742 ;; 743 *) 744 sourced_files="${sourced_files}:$i:" 745 if [ -r $i ]; then 746 . $i 747 fi 748 ;; 749 esac 750 done 751 # Re-do process to pick up [possibly] redefined $rc_conf_files 752 for i in ${rc_conf_files}; do 753 case ${sourced_files} in 754 *:$i:*) 755 ;; 756 *) 757 sourced_files="${sourced_files}:$i:" 758 if [ -r $i ]; then 759 . $i 760 fi 761 ;; 762 esac 763 done 764 } 765fi 766 767# Allow vendors to override FreeBSD defaults in /etc/default/rc.conf 768# without the need to carefully manage /etc/rc.conf. 769if [ -r /etc/defaults/vendor.conf ]; then 770 . /etc/defaults/vendor.conf 771fi 772