1#!/bin/sh 2 3# This is rc.conf - a file full of useful variables that you can set 4# to change the default startup behavior of your system. You should 5# not edit this file! Put any overrides into one of the ${rc_conf_files} 6# instead and you will be able to update these defaults later without 7# spamming your local configuration information. 8# 9# The ${rc_conf_files} files should only contain values which override 10# values set in this file. This eases the upgrade path when defaults 11# are changed and new features are added. 12# 13# All arguments must be in double or single quotes. 14# 15# For a more detailed explanation of all the rc.conf variables, please 16# refer to the rc.conf(5) manual page. 17# 18# $FreeBSD$ 19 20############################################################## 21### Important initial Boot-time options #################### 22############################################################## 23 24# Set default value of _localbase if not previously set 25: ${_localbase:="/usr/local"} 26 27# rc_debug can't be set here without interferring with rc.subr's setting it 28# when the kenv variable rc.debug is set. 29#rc_debug="NO" # Set to YES to enable debugging output from rc.d 30rc_info="NO" # Enables display of informational messages at boot. 31rc_startmsgs="YES" # Show "Starting foo:" messages at boot 32rcshutdown_timeout="90" # Seconds to wait before terminating rc.shutdown 33early_late_divider="FILESYSTEMS" # Script that separates early/late 34 # stages of the boot process. Make sure you know 35 # the ramifications if you change this. 36 # See rc.conf(5) for more details. 37always_force_depends="NO" # Set to check that indicated dependencies are 38 # running during boot (can increase boot time). 39 40apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO). 41apmd_enable="NO" # Run apmd to handle APM event from userland. 42apmd_flags="" # Flags to apmd (if enabled). 43ddb_enable="NO" # Set to YES to load ddb scripts at boot. 44ddb_config="/etc/ddb.conf" # ddb(8) config file. 45devd_enable="YES" # Run devd, to trigger programs on device tree changes. 46devd_flags="" # Additional flags for devd(8). 47devmatch_enable="YES" # Demand load kernel modules based on device ids. 48devmatch_blocklist="" # List of modules (w/o .ko) to exclude from devmatch. 49#kld_list="" # Kernel modules to load after local disks are mounted 50kldxref_enable="YES" # Build linker.hints files with kldxref(8). 51kldxref_clobber="NO" # Overwrite old linker.hints at boot. 52kldxref_module_path="" # Override kern.module_path. A ';'-delimited list. 53powerd_enable="NO" # Run powerd to lower our power usage. 54powerd_flags="" # Flags to powerd (if enabled). 55tmpmfs="AUTO" # Set to YES to always create an mfs /tmp, NO to never 56tmpsize="20m" # Size of mfs /tmp if created 57tmpmfs_flags="-S" # Extra mdmfs options for the mfs /tmp 58varmfs="AUTO" # Set to YES to always create an mfs /var, NO to never 59varsize="32m" # Size of mfs /var if created 60varmfs_flags="-S" # Extra mount options for the mfs /var 61mfs_type="auto" # "md", "tmpfs", "auto" to prefer tmpfs with md as fallback 62populate_var="AUTO" # Set to YES to always (re)populate /var, NO to never 63cleanvar_enable="YES" # Clean the /var directory 64local_startup="${_localbase}/etc/rc.d" # startup script dirs. 65script_name_sep=" " # Change if your startup scripts' names contain spaces 66rc_conf_files="/etc/rc.conf /etc/rc.conf.local" 67 68# ZFS support 69zfs_enable="NO" # Set to YES to automatically mount ZFS file systems 70zfskeys_enable="NO" # Set YES to autoload ZFS encryption keys 71zfs_bootonce_activate="NO" # Set YES to make successful bootonce BE permanent 72zpool_reguid="" # Set to zpools for which the GUID should be replaced 73 # upon first boot. 74 75# ZFSD support 76zfsd_enable="NO" # Set to YES to automatically start the ZFS fault 77 # management daemon. 78 79gptboot_enable="YES" # GPT boot success/failure reporting. 80 81# Experimental - test before enabling 82gbde_autoattach_all="NO" # YES automatically mounts gbde devices from fstab 83gbde_devices="NO" # Devices to automatically attach (list, or AUTO) 84gbde_attach_attempts="3" # Number of times to attempt attaching gbde devices 85gbde_lockdir="/etc" # Where to look for gbde lockfiles 86 87# GELI disk encryption configuration. 88geli_devices="" # List of devices to automatically attach in addition to 89 # GELI devices listed in /etc/fstab. 90geli_groups="" # List of groups containing devices to automatically 91 # attach with the same keyfiles and passphrase 92geli_tries="" # Number of times to attempt attaching geli device. 93 # If empty, kern.geom.eli.tries will be used. 94geli_default_flags="" # Default flags for geli(8). 95geli_autodetach="YES" # Automatically detach on last close. 96 # Providers are marked as such when all file systems are 97 # mounted. 98# Example use. 99#geli_devices="da1 mirror/home" 100#geli_da1_flags="-p -k /etc/geli/da1.keys" 101#geli_da1_autodetach="NO" 102#geli_mirror_home_flags="-k /etc/geli/home.keys" 103#geli_groups="storage backup" 104#geli_storage_flags="-k /etc/geli/storage.keys" 105#geli_storage_devices="ada0 ada1" 106#geli_backup_flags="-j /etc/geli/backup.passfile -k /etc/geli/backup.keys" 107#geli_backup_devices="ada2 ada3" 108 109root_rw_mount="YES" # Set to NO to inhibit remounting root read-write. 110root_hold_delay="30" # Time to wait for root mount hold release. 111fsck_flags="-p" # May be changed to -f (or -f -y) to force a full fsck 112fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails. 113fsck_y_flags="-T ffs:-R -T ufs:-R" # Additional flags for fsck -y 114background_fsck="YES" # Attempt to run fsck in the background where possible. 115background_fsck_delay="60" # Time to wait (seconds) before starting the fsck. 116growfs_enable="NO" # Set to YES to attempt to grow the root filesystem on boot 117netfs_types="nfs:NFS smbfs:SMB" # Net filesystems. 118extra_netfs_types="NO" # List of network extra filesystem types for delayed 119 # mount at startup (or NO). 120 121############################################################## 122### Network configuration sub-section ###################### 123############################################################## 124 125### Basic network and firewall/security options: ### 126hostname="" # Set this! 127hostid_enable="YES" # Set host UUID. 128hostid_file="/etc/hostid" # File with hostuuid. 129nisdomainname="NO" # Set to NIS domain if using NIS (or NO). 130dhclient_program="/sbin/dhclient" # Path to dhcp client program. 131dhclient_flags="" # Extra flags to pass to dhcp client. 132#dhclient_flags_em0="" # Extra dhclient flags for em0 only 133background_dhclient="NO" # Start dhcp client in the background. 134#background_dhclient_em0="YES" # Start dhcp client on em0 in the background. 135synchronous_dhclient="NO" # Start dhclient directly on configured 136 # interfaces during startup. 137defaultroute_delay="30" # Time to wait for a default route on a DHCP interface. 138defaultroute_carrier_delay="5" # Time to wait for carrier while waiting for a default route. 139netif_enable="YES" # Set to YES to initialize network interfaces 140netif_ipexpand_max="2048" # Maximum number of IP addrs in a range spec. 141wpa_supplicant_program="/usr/sbin/wpa_supplicant" 142wpa_supplicant_flags="-s" # Extra flags to pass to wpa_supplicant 143wpa_supplicant_conf_file="/etc/wpa_supplicant.conf" 144# 145firewall_enable="NO" # Set to YES to enable firewall functionality 146firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall 147firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall) 148firewall_quiet="NO" # Set to YES to suppress rule display 149firewall_logging="NO" # Set to YES to enable events logging 150firewall_logif="NO" # Set to YES to create logging-pseudo interface 151firewall_flags="" # Flags passed to ipfw when type is a file 152firewall_coscripts="" # List of executables/scripts to run after 153 # firewall starts/stops 154firewall_client_net="192.0.2.0/24" # IPv4 Network address for "client" 155 # firewall. 156#firewall_client_net_ipv6="2001:db8:2:1::/64" # IPv6 network prefix for 157 # "client" firewall. 158firewall_simple_iif="em1" # Inside network interface for "simple" 159 # firewall. 160firewall_simple_inet="192.0.2.16/28" # Inside network address for "simple" 161 # firewall. 162firewall_simple_oif="em0" # Outside network interface for "simple" 163 # firewall. 164firewall_simple_onet="192.0.2.0/28" # Outside network address for "simple" 165 # firewall. 166#firewall_simple_iif_ipv6="em1" # Inside IPv6 network interface for "simple" 167 # firewall. 168#firewall_simple_inet_ipv6="2001:db8:2:800::/56" # Inside IPv6 network prefix 169 # for "simple" firewall. 170#firewall_simple_oif_ipv6="em0" # Outside IPv6 network interface for "simple" 171 # firewall. 172#firewall_simple_onet_ipv6="2001:db8:2:0::/56" # Outside IPv6 network prefix 173 # for "simple" firewall. 174firewall_myservices="" # List of ports/protocols on which this host 175 # offers services for "workstation" firewall. 176firewall_allowservices="" # List of IPs which have access to 177 # $firewall_myservices for "workstation" 178 # firewall. 179firewall_trusted="" # List of IPs which have full access to this 180 # host for "workstation" firewall. 181firewall_logdeny="NO" # Set to YES to log default denied incoming 182 # packets for "workstation" firewall. 183firewall_nologports="135-139,445 1026,1027 1433,1434" # List of TCP/UDP ports 184 # for which denied incoming packets are not 185 # logged for "workstation" firewall. 186firewall_nat_enable="NO" # Enable kernel NAT (if firewall_enable == YES) 187firewall_nat_interface="" # Public interface or IPaddress to use 188firewall_nat_flags="" # Additional configuration parameters 189firewall_nat64_enable="NO" # Enable kernel NAT64 module. 190firewall_nptv6_enable="NO" # Enable kernel NPTv6 module. 191firewall_pmod_enable="NO" # Enable kernel protocols modification module. 192dummynet_enable="NO" # Load the dummynet(4) module 193ipfw_netflow_enable="NO" # Enable netflow logging via ng_netflow 194ip_portrange_first="NO" # Set first dynamically allocated port 195ip_portrange_last="NO" # Set last dynamically allocated port 196ike_enable="NO" # Enable IKE daemon (usually racoon or isakmpd) 197ike_program="${_localbase}/sbin/isakmpd" # Path to IKE daemon 198ike_flags="" # Additional flags for IKE daemon 199ipsec_enable="NO" # Set to YES to run setkey on ipsec_file 200ipsec_file="/etc/ipsec.conf" # Name of config file for setkey 201natd_program="/sbin/natd" # path to natd, if you want a different one. 202natd_enable="NO" # Enable natd (if firewall_enable == YES). 203natd_interface="" # Public interface or IPaddress to use. 204natd_flags="" # Additional flags for natd. 205ipfilter_enable="NO" # Set to YES to enable ipfilter functionality 206ipfilter_program="/sbin/ipf" # where the ipfilter program lives 207ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see 208 # /usr/src/contrib/ipfilter/rules for examples 209ipfilter_flags="" # additional flags for ipfilter 210ippool_enable="NO" # Set to YES to enable ip filter pools 211ippool_program="/sbin/ippool" # where the ippool program lives 212ippool_rules="/etc/ippool.tables" # rules definition file for ippool 213ippool_flags="" # additional flags for ippool 214ipnat_enable="NO" # Set to YES to enable ipnat functionality 215ipnat_program="/sbin/ipnat" # where the ipnat program lives 216ipnat_rules="/etc/ipnat.rules" # rules definition file for ipnat 217ipnat_flags="" # additional flags for ipnat 218ipmon_enable="NO" # Set to YES for ipmon; needs ipfilter or ipnat 219ipmon_program="/sbin/ipmon" # where the ipfilter monitor program lives 220ipmon_flags="-Ds" # typically "-Ds" or "-D /var/log/ipflog" 221ipfs_enable="NO" # Set to YES to enable saving and restoring 222 # of state tables at shutdown and boot 223ipfs_program="/sbin/ipfs" # where the ipfs program lives 224ipfs_flags="" # additional flags for ipfs 225pf_enable="NO" # Set to YES to enable packet filter (pf) 226pf_rules="/etc/pf.conf" # rules definition file for pf (nonexistent 227 # by default) 228pf_program="/sbin/pfctl" # where the pfctl program lives 229pf_flags="" # additional flags for pfctl 230pf_fallback_rules_enable="NO" # fallback if loading ruleset fails 231pf_fallback_rules="block drop log all" # rules to load on pf ruleset failure 232#pf_fallback_rules="block drop log all 233#pass quick on em4" # multi-rule 234pf_fallback_rules_file="/etc/pf-fallback.conf" # rules file on ruleset failure 235pflog_enable="NO" # Set to YES to enable packet filter logging 236pflog_logfile="/var/log/pflog" # where pflogd should store the logfile 237pflog_program="/sbin/pflogd" # where the pflogd program lives 238pflog_flags="" # additional flags for pflogd 239ftpproxy_enable="NO" # Set to YES to enable ftp-proxy(8) for pf 240ftpproxy_flags="" # additional flags for ftp-proxy(8) 241pfsync_enable="NO" # Expose pf state to other hosts for syncing 242pfsync_syncdev="" # Interface for pfsync to work through 243pfsync_syncpeer="" # IP address of pfsync peer host 244pfsync_ifconfig="" # Additional options to ifconfig(8) for pfsync 245tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions. 246log_in_vain="0" # >=1 to log connects to ports w/o listeners. 247tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO). 248tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN 249 # NOTE: this violates the TCP specification 250icmp_drop_redirect="auto" # Set to YES to ignore ICMP REDIRECT packets 251icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets 252network_interfaces="auto" # List of network interfaces (or "auto"). 253cloned_interfaces="" # List of cloned network interfaces to create. 254#cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config. 255#ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. 256#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry. 257#ifconfig_em0_ipv6="inet6 2001:db8:1::1 prefixlen 64" # Sample IPv6 addr entry 258#ifconfig_em0_alias0="inet6 2001:db8:2::1 prefixlen 64" # Sample IPv6 alias 259#ifconfig_em0_name="net0" # Change interface name from em0 to net0. 260#vlans_em0="101 vlan0" # vlan(4) interfaces for em0 device 261#create_args_vlan0="vlan 102" # vlan tag for vlan0 device 262#wlans_ath0="wlan0" # wlan(4) interfaces for ath0 device 263#wlandebug_wlan0="scan+auth+assoc" # Set debug flags with wlandebug(8) 264#ipv4_addrs_em0="192.168.0.1/24 192.168.1.1-5/28" # example IPv4 address entry. 265# 266#autobridge_interfaces="bridge0" # List of bridges to check 267#autobridge_bridge0="tap* vlan0" # Interface glob to automatically add to the bridge 268 269# User ppp configuration. 270ppp_enable="NO" # Start user-ppp (or NO). 271ppp_program="/usr/sbin/ppp" # Path to user-ppp program. 272ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated". 273 # For details see man page for ppp(8). Default is auto. 274ppp_nat="YES" # Use PPP's internal network address translation or NO. 275ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf. 276ppp_user="root" # Which user to run ppp as 277 278# Start multiple instances of ppp at boot time 279#ppp_profile="profile1 profile2 profile3" # Which profiles to use 280#ppp_profile1_mode="ddial" # Override ppp mode for profile1 281#ppp_profile2_nat="NO" # Override nat mode for profile2 282# profile3 uses default ppp_mode and ppp_nat 283 284### Network daemon (miscellaneous) ### 285hostapd_program="/usr/sbin/hostapd" 286hostapd_enable="NO" # Run hostap daemon. 287syslogd_enable="YES" # Run syslog daemon (or NO). 288syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one. 289syslogd_flags="-s" # Flags to syslogd (if enabled). 290syslogd_oomprotect="YES" # Don't kill syslogd when swap space is exhausted. 291altlog_proglist="" # List of chrooted applicatioins in /var 292inetd_enable="NO" # Run the network daemon dispatcher (YES/NO). 293inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one. 294inetd_flags="-wW -C 60" # Optional flags to inetd 295iscsid_enable="NO" # iSCSI initiator daemon. 296iscsictl_enable="NO" # iSCSI initiator autostart. 297iscsictl_flags="-Aa" # Optional flags to iscsictl. 298hastd_enable="NO" # Run the HAST daemon (YES/NO). 299hastd_program="/sbin/hastd" # path to hastd, if you want a different one. 300hastd_flags="" # Optional flags to hastd. 301ggated_enable="NO" # Run the ggate daemon (YES/NO). 302ggated_config="/etc/gg.exports" # ggated(8) exports file. 303ggated_flags="" # Extra parameters like which port to bind to. 304ctld_enable="NO" # CAM Target Layer / iSCSI target daemon. 305local_unbound_enable="NO" # Local caching resolver 306local_unbound_tls="NO" # Use DNS over TLS 307blacklistd_enable="NO" # Run blacklistd daemon (YES/NO). 308blacklistd_flags="" # Optional flags for blacklistd(8). 309resolv_enable="YES" # Enable resolv / resolvconf 310 311# 312# kerberos. Do not run the admin daemons on slave servers 313# 314kdc_enable="NO" # Run a kerberos 5 KDC (or NO). 315kdc_program="/usr/libexec/kdc" # path to kerberos 5 KDC 316kdc_flags="" # Additional flags to the kerberos 5 KDC 317kadmind_enable="NO" # Run kadmind (or NO) 318kadmind_program="/usr/libexec/kadmind" # path to kadmind 319kpasswdd_enable="NO" # Run kpasswdd (or NO) 320kpasswdd_program="/usr/libexec/kpasswdd" # path to kpasswdd 321kfd_enable="NO" # Run kfd (or NO) 322kfd_program="/usr/libexec/kfd" # path to kerberos 5 kfd daemon 323kfd_flags="" 324ipropd_master_enable="NO" # Run Heimdal incremental propagation daemon 325 # (master daemon). 326ipropd_master_program="/usr/libexec/ipropd-master" 327ipropd_master_flags="" # Flags to ipropd-master. 328ipropd_master_keytab="/etc/krb5.keytab" # keytab for ipropd-master. 329ipropd_master_slaves="" # slave node names used for /var/heimdal/slaves. 330ipropd_slave_enable="NO" # Run Heimdal incremental propagation daemon 331 # (slave daemon). 332ipropd_slave_program="/usr/libexec/ipropd-slave" 333ipropd_slave_flags="" # Flags to ipropd-slave. 334ipropd_slave_keytab="/etc/krb5.keytab" # keytab for ipropd-slave. 335ipropd_slave_master="" # master node name. 336 337gssd_enable="NO" # Run the gssd daemon (or NO). 338gssd_program="/usr/sbin/gssd" # Path to gssd. 339gssd_flags="" # Flags for gssd. 340 341rwhod_enable="NO" # Run the rwho daemon (or NO). 342rwhod_flags="" # Flags for rwhod 343rarpd_enable="NO" # Run rarpd (or NO). 344rarpd_flags="-a" # Flags to rarpd. 345bootparamd_enable="NO" # Run bootparamd (or NO). 346bootparamd_flags="" # Flags to bootparamd 347pppoed_enable="NO" # Run the PPP over Ethernet daemon. 348pppoed_provider="*" # Provider and ppp(8) config file entry. 349pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled). 350pppoed_interface="em0" # The interface that pppoed runs on. 351sshd_enable="NO" # Enable sshd 352sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one. 353sshd_flags="" # Additional flags for sshd. 354ftpd_enable="NO" # Enable stand-alone ftpd. 355ftpd_program="/usr/libexec/ftpd" # Path to ftpd, if you want a different one. 356ftpd_flags="" # Additional flags to stand-alone ftpd. 357 358### Network daemon (NFS): All need rpcbind_enable="YES" ### 359autofs_enable="NO" # Run autofs daemons. 360automount_flags="" # Flags to automount(8) (if autofs enabled). 361automountd_flags="" # Flags to automountd(8) (if autofs enabled). 362autounmountd_flags="" # Flags to autounmountd(8) (if autofs enabled). 363nfs_client_enable="NO" # This host is an NFS client (or NO). 364nfs_access_cache="60" # Client cache timeout in seconds 365nfs_server_enable="NO" # This host is an NFS server (or NO). 366nfs_server_flags="-u -t" # Flags to nfsd (if enabled). 367nfs_server_managegids="NO" # The NFS server maps gids for AUTH_SYS (or NO). 368nfs_server_maxio="131072" # Maximum I/O size for the nfsd. 369mountd_enable="NO" # Run mountd (or NO). 370mountd_flags="-r -S" # Flags to mountd (if NFS server enabled). 371weak_mountd_authentication="NO" # Allow non-root mount requests to be served. 372nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO). 373nfs_bufpackets="" # bufspace (in packets) for client 374rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server. 375rpc_lockd_flags="" # Flags to rpc.lockd (if enabled). 376rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server. 377rpc_statd_flags="" # Flags to rpc.statd (if enabled). 378rpcbind_enable="NO" # Run the portmapper service (YES/NO). 379rpcbind_program="/usr/sbin/rpcbind" # path to rpcbind, if you want a different one. 380rpcbind_flags="" # Flags to rpcbind (if enabled). 381rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO). 382keyserv_enable="NO" # Run the SecureRPC keyserver (or NO). 383keyserv_flags="" # Flags to keyserv (if enabled). 384nfsv4_server_enable="NO" # Enable support for NFSv4 385nfsv4_server_only="NO" # Set NFS server to NFSv4 only 386nfscbd_enable="NO" # NFSv4 client side callback daemon 387nfscbd_flags="" # Flags for nfscbd 388nfsuserd_enable="NO" # NFSv4 user/group name mapping daemon 389nfsuserd_flags="" # Flags for nfsuserd 390tlsclntd_enable="NO" # Run rpc.tlsclntd needed for NFS-over-TLS mount 391tlsclntd_flags="" # Flags for rpc.tlsclntd 392tlsservd_enable="NO" # Run rpc.tlsservd needed for NFS-over-TLS nfsd 393tlsservd_flags="" # Flags for rpc.tlsservd 394 395### Network Time Services options: ### 396ntpdate_enable="NO" # Run ntpdate to sync time on boot (or NO). 397ntpdate_program="/usr/sbin/ntpdate" # path to ntpdate, if you want a different one. 398ntpdate_flags="-b" # Flags to ntpdate (if enabled). 399ntpdate_config="/etc/ntp.conf" # ntpdate(8) configuration file 400ntpdate_hosts="" # Whitespace-separated list of ntpdate(8) servers. 401ntpd_enable="NO" # Run ntpd Network Time Protocol (or NO). 402ntpd_program="/usr/sbin/ntpd" # path to ntpd, if you want a different one. 403ntpd_config="/etc/ntp.conf" # ntpd(8) configuration file 404ntpd_sync_on_start="NO" # Sync time on ntpd startup, even if offset is high 405ntpd_flags="" # Additional flags to ntpd 406ntp_src_leapfile="/etc/ntp/leap-seconds" 407 # Initial source for ntpd leapfile 408ntp_db_leapfile="/var/db/ntpd.leap-seconds.list" 409 # Working copy (updated weekly) leapfile 410ntp_leapfile_sources="https://www.ietf.org/timezones/data/leap-seconds.list" 411 # Source from which to fetch leapfile 412ntp_leapfile_fetch_opts="-mq" # Options to use for ntp leapfile fetch, 413 # e.g. --no-verify-peer 414ntp_leapfile_expiry_days=30 # Check for new leapfile 30 days prior to 415 # expiry. 416ntp_leapfile_fetch_verbose="NO" # Be verbose during NTP leapfile fetch 417 418# Network Information Services (NIS) options: All need rpcbind_enable="YES" ### 419nis_client_enable="NO" # We're an NIS client (or NO). 420nis_client_flags="" # Flags to ypbind (if enabled). 421nis_ypset_enable="NO" # Run ypset at boot time (or NO). 422nis_ypset_flags="" # Flags to ypset (if enabled). 423nis_server_enable="NO" # We're an NIS server (or NO). 424nis_server_flags="" # Flags to ypserv (if enabled). 425nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO). 426nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled). 427nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO). 428nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled). 429nis_ypldap_enable="NO" # Run ypldap at boot time (or NO). 430nis_ypldap_flags="" # Flags to ypldap (if enabled). 431 432### SNMP daemon ### 433# Be sure to understand the security implications of running SNMP v1/v2 434# in your network. 435bsnmpd_enable="NO" # Run the SNMP daemon (or NO). 436bsnmpd_flags="" # Flags for bsnmpd. 437 438### Network routing options: ### 439defaultrouter="NO" # Set to default gateway (or NO). 440#defaultrouter_fibN="192.0.2.1" # Use this form to set a gateway for FIB N 441static_arp_pairs="" # Set to static ARP list (or leave empty). 442static_ndp_pairs="" # Set to static NDP list (or leave empty). 443static_routes="" # Set to static route list (or leave empty). 444gateway_enable="NO" # Set to YES if this host will be a gateway. 445routed_enable="NO" # Set to YES to enable a routing daemon. 446routed_program="/sbin/routed" # Name of routing daemon to use if enabled. 447routed_flags="-q" # Flags for routing daemon. 448arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL. 449forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES") 450accept_sourceroute="NO" # accept source routed packets to us 451 452### Bluetooth ### 453hcsecd_enable="NO" # Enable hcsecd(8) (or NO) 454hcsecd_config="/etc/bluetooth/hcsecd.conf" # hcsecd(8) configuration file 455 456sdpd_enable="NO" # Enable sdpd(8) (or NO) 457sdpd_control="/var/run/sdp" # sdpd(8) control socket 458sdpd_groupname="nobody" # set spdp(8) user/group to run as after 459sdpd_username="nobody" # it initializes 460 461bthidd_enable="NO" # Enable bthidd(8) (or NO) 462bthidd_config="/etc/bluetooth/bthidd.conf" # bthidd(8) configuration file 463bthidd_hids="/var/db/bthidd.hids" # bthidd(8) known HID devices file 464bthidd_evdev_support="AUTO" # AUTO depends on EVDEV_SUPPORT kernel option 465 466rfcomm_pppd_server_enable="NO" # Enable rfcomm_pppd(8) in server mode (or NO) 467rfcomm_pppd_server_profile="one two" # Profile to use from /etc/ppp/ppp.conf 468# 469#rfcomm_pppd_server_one_bdaddr="" # Override local bdaddr for 'one' 470rfcomm_pppd_server_one_channel="1" # Override local channel for 'one' 471#rfcomm_pppd_server_one_register_sp="NO" # Override SP and DUN register 472#rfcomm_pppd_server_one_register_dun="NO" # for 'one' 473# 474#rfcomm_pppd_server_two_bdaddr="" # Override local bdaddr for 'two' 475rfcomm_pppd_server_two_channel="3" # Override local channel for 'two' 476#rfcomm_pppd_server_two_register_sp="NO" # Override SP and DUN register 477#rfcomm_pppd_server_two_register_dun="NO" # for 'two' 478 479ubthidhci_enable="NO" # Switch an USB BT controller present on 480#ubthidhci_busnum="3" # bus 3 and addr 2 from HID mode to HCI mode. 481#ubthidhci_addr="2" # Check usbconfig list to find the correct 482 # numbers for your system. 483 484### Network link/usability verification options 485netwait_enable="NO" # Enable rc.d/netwait (or NO) 486#netwait_ip="" # Wait for ping response from any IP in this list. 487netwait_timeout="60" # Total number of seconds to perform pings. 488#netwait_if="" # Wait for active link on each intf in this list. 489netwait_if_timeout="30" # Total number of seconds to monitor link state. 490 491### Miscellaneous network options: ### 492icmp_bmcastecho="NO" # respond to broadcast ping packets 493 494### IPv6 options: ### 495ipv6_network_interfaces="auto" # List of IPv6 network interfaces 496 # (or "auto" or "none"). 497ipv6_activate_all_interfaces="NO" # If NO, interfaces which have no 498 # corresponding $ifconfig_IF_ipv6 is 499 # marked as IFDISABLED for security 500 # reason. 501ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO). 502#ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068) 503#ipv6_defaultrouter_fibN="2001:db8::" # Use this form to set a gateway for FIB N 504ipv6_static_routes="" # Set to static route list (or leave empty). 505#ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64 506 # route toward loopback interface. 507#ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1" 508ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway. 509ipv6_cpe_wanif="NO" # Set to the upstream interface name if this 510 # node will work as a router to forward IPv6 511 # packets not explicitly addressed to itself. 512ipv6_privacy="NO" # Use privacy address on RA-receiving IFs 513 # (RFC 4941) 514 515route6d_enable="NO" # Set to YES to enable an IPv6 routing daemon. 516route6d_program="/usr/sbin/route6d" # Name of IPv6 routing daemon. 517route6d_flags="" # Flags to IPv6 routing daemon. 518#route6d_flags="-l" # Example for route6d with only IPv6 site local 519 # addrs. 520#route6d_flags="-q" # If you want to run a routing daemon on an end 521 # node, you should stop advertisement. 522#ipv6_network_interfaces="em0 em1" # Examples for router 523 # or static configuration for end node. 524 # Choose correct prefix value. 525#ipv6_prefix_em0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr. 526#ipv6_prefix_em1="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr. 527ipv6_default_interface="NO" # Default output interface for scoped addrs. 528 # This works only with 529 # ipv6_gateway_enable="NO". 530rtsol_flags="-i" # Flags to IPv6 router solicitation. 531rtsold_enable="NO" # Set to YES to enable an IPv6 router 532 # solicitation daemon. 533rtsold_flags="-a -i" # Flags to an IPv6 router solicitation 534 # daemon. 535rtadvd_enable="NO" # Set to YES to enable an IPv6 router 536 # advertisement daemon. If set to YES, 537 # this router becomes a possible candidate 538 # IPv6 default router for local subnets. 539rtadvd_interfaces="" # Interfaces rtadvd sends RA packets. 540stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4 541 # tunneling interface. Specify this entry 542 # to enable 6to4 interface. 543stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr, 544 # to limit peer addr range. Effective value 545 # is 0-31. 546stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0. 547 # If you like, you can set "AUTO" for this. 548stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0 549ipv6_ipv4mapping="NO" # Set to "YES" to enable IPv4 mapped IPv6 addr 550 # communication. (like ::ffff:a.b.c.d) 551ip6addrctl_enable="YES" # Set to YES to enable default address selection 552ip6addrctl_verbose="NO" # Set to YES to enable verbose configuration messages 553ip6addrctl_policy="AUTO" # A pre-defined address selection policy 554 # (ipv4_prefer, ipv6_prefer, or AUTO) 555 556############################################################## 557### System console options ################################# 558############################################################## 559 560keyboard="" # keyboard device to use (default /dev/kbd0). 561keymap="NO" # keymap in /usr/share/{syscons,vt}/keymaps/* (or NO). 562keyrate="NO" # keyboard rate to: slow, normal, fast (or NO). 563keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable. 564keychange="NO" # function keys default values (or NO). 565cursor="NO" # cursor type {normal|blink|destructive} (or NO). 566scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO). 567font8x16="NO" # font 8x16 from /usr/share/{syscons,vt}/fonts/* (or NO). 568font8x14="NO" # font 8x14 from /usr/share/{syscons,vt}/fonts/* (or NO). 569font8x8="NO" # font 8x8 from /usr/share/{syscons,vt}/fonts/* (or NO). 570blanktime="300" # blank time (in seconds) or "NO" to turn it off. 571saver="NO" # screen saver: Uses /boot/kernel/${saver}_saver.ko 572moused_nondefault_enable="YES" # Treat non-default mice as enabled unless 573 # specifically overridden in rc.conf(5). 574moused_enable="NO" # Run the mouse daemon. 575moused_type="auto" # See man page for rc.conf(5) for available settings. 576moused_port="/dev/psm0" # Set to your mouse port. 577moused_flags="" # Any additional flags to moused. 578mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your 579 # language code table, specify alternative range 580 # start like mousechar_start=3, see vidcontrol(1) 581allscreens_flags="" # Set this vidcontrol mode for all virtual screens 582allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens 583 584############################################################## 585### Mail Transfer Agent (MTA) options ###################### 586############################################################## 587 588mta_start_script="/etc/rc.sendmail" 589 # Script to start your chosen MTA, called by /etc/rc. 590# Settings for /etc/rc.sendmail and /etc/rc.d/sendmail: 591sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO). 592sendmail_pidfile="/var/run/sendmail.pid" # sendmail pid file 593sendmail_procname="/usr/sbin/sendmail" # sendmail process name 594sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server) 595sendmail_cert_create="YES" # Create a server certificate if none (YES/NO) 596#sendmail_cert_cn="CN" # CN of the generate certificate 597sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission 598sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost" 599 # Flags for localhost-only MTA 600sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO). 601sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only) 602sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO). 603sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m" 604 # Flags for sendmail_msp_queue daemon. 605sendmail_rebuild_aliases="NO" # Run newaliases if necessary (YES/NO). 606 607 608############################################################## 609### Miscellaneous administrative options ################### 610############################################################## 611 612auditd_enable="NO" # Run the audit daemon. 613auditd_program="/usr/sbin/auditd" # Path to the audit daemon. 614auditd_flags="" # Which options to pass to the audit daemon. 615auditdistd_enable="NO" # Run the audit daemon. 616auditdistd_program="/usr/sbin/auditdistd" # Path to the auditdistd daemon. 617auditdistd_flags="" # Which options to pass to the auditdistd daemon. 618cron_enable="YES" # Run the periodic job daemon. 619cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled). 620cron_dst="YES" # Handle DST transitions intelligently (YES/NO) 621cron_flags="" # Which options to pass to the cron daemon. 622cfumass_enable="NO" # Create default LUN for cfumass(4). 623cfumass_dir="/var/cfumass" # File to LUN's contents. 624cfumass_image="/var/tmp/cfumass.img" # LUN's backing file path. 625lpd_enable="NO" # Run the line printer daemon. 626lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one. 627lpd_flags="" # Flags to lpd (if enabled). 628nscd_enable="NO" # Run the nsswitch caching daemon. 629chkprintcap_enable="NO" # Run chkprintcap(8) before running lpd. 630chkprintcap_flags="-d" # Create missing directories by default. 631dumpdev="AUTO" # Device to crashdump to (device name, AUTO, or NO). 632dumpon_flags="" # Options to pass to dumpon(8), followed by dumpdev. 633dumpdir="/var/crash" # Directory where crash dumps are to be stored 634savecore_enable="YES" # Extract core from dump devices if any 635savecore_flags="-m 10" # Used if dumpdev is enabled above, and present. 636 # By default, only the 10 most recent kernel dumps 637 # are saved. 638service_delete_empty="NO" # Have 'service delete' remove empty rc.conf.d files. 639crashinfo_enable="YES" # Automatically generate crash dump summary. 640crashinfo_program="/usr/sbin/crashinfo" # Script to generate crash dump summary. 641quota_enable="NO" # turn on quotas on startup (or NO). 642check_quotas="YES" # Check quotas on startup (or NO). 643quotaon_flags="-a" # Turn quotas on for all file systems (if enabled) 644quotaoff_flags="-a" # Turn quotas off for all file systems at shutdown 645quotacheck_flags="-a" # Check all file system quotas (if enabled) 646accounting_enable="NO" # Turn on process accounting (or NO). 647firstboot_sentinel="/firstboot" # Scripts with "firstboot" keyword are run if 648 # this file exists. Should be on a R/W filesystem so 649 # the file can be deleted after the boot completes. 650sysvipc_enable="NO" # Load System V IPC primitives at startup (or NO). 651linux_enable="NO" # Linux binary compatibility loaded at startup (or NO). 652linux_mounts_enable="YES" # If linux_enable is set to YES, mount Linux-specific 653 # filesystems at startup. 654clear_tmp_enable="NO" # Clear /tmp at startup. 655clear_tmp_X="YES" # Clear and recreate X11-related directories in /tmp 656ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks 657ldconfig_paths="/usr/lib/compat ${_localbase}/lib ${_localbase}/lib/compat/pkg" 658 # shared library search paths 659ldconfig32_paths="/usr/lib32 /usr/lib32/compat" 660 # 32-bit compatibility shared library search paths 661ldconfig_local_dirs="${_localbase}/libdata/ldconfig" 662 # Local directories with ldconfig configuration files. 663ldconfig_local32_dirs="${_localbase}/libdata/ldconfig32" 664 # Local directories with 32-bit compatibility ldconfig 665 # configuration files. 666kern_securelevel_enable="NO" # kernel security level (see security(7)) 667kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure 668 # Note that setting securelevel to 0 will result 669 # in the system booting with securelevel set to 1, as 670 # init(8) will raise the level when rc(8) completes. 671update_motd="YES" # update version info in /etc/motd (or NO) 672entropy_boot_file="/boot/entropy" # Set to NO to disable very early 673 # (used at early boot time) entropy caching through reboots. 674entropy_file="/entropy" # Set to NO to disable late (used when going multi-user) 675 # entropy through reboots. 676 # /var/db/entropy-file is preferred if / is not avail. 677entropy_dir="/var/db/entropy" # Set to NO to disable caching entropy via cron. 678entropy_save_sz="4096" # Size of the entropy cache files. 679entropy_save_num="8" # Number of entropy cache files to save. 680harvest_mask="511" # Entropy device harvests all but the very invasive sources. 681 # (See 'sysctl kern.random.harvest' and random(4)) 682osrelease_enable="YES" # Update /var/run/os-release on boot (or NO). 683osrelease_file="/var/run/os-release" # File to update for os-release. 684osrelease_perms="444" # Default permission for os-release file. 685dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot 686watchdogd_enable="NO" # Start the software watchdog daemon 687watchdogd_flags="" # Flags to watchdogd (if enabled) 688watchdogd_timeout="" # watchdogd timeout, overrides -t in watchdogd_flags 689watchdogd_shutdown_timeout="" # Timeout to use after watchdogd is stopped. 690 # Has effect only for system shutdown. 691 # Overrides -x in watchdogd_flags. 692devfs_rulesets="/etc/defaults/devfs.rules /etc/devfs.rules" # Files containing 693 # devfs(8) rules. 694devfs_system_ruleset="" # The name (NOT number) of a ruleset to apply to /dev 695devfs_set_rulesets="" # A list of /mount/dev=ruleset_name settings to 696 # apply (must be mounted already, i.e. fstab(5)) 697devfs_load_rulesets="YES" # Enable to always load the default rulesets 698performance_cx_lowest="NONE" # Online CPU idle state 699performance_cpu_freq="NONE" # Online CPU frequency 700economy_cx_lowest="Cmax" # Offline CPU idle state 701economy_cpu_freq="NONE" # Offline CPU frequency 702virecover_enable="YES" # Perform housekeeping for the vi(1) editor 703ugidfw_enable="NO" # Load mac_bsdextended(4) rules on boot 704bsdextended_script="/etc/rc.bsdextended" # Default mac_bsdextended(4) 705 # ruleset file. 706newsyslog_enable="YES" # Run newsyslog at startup. 707newsyslog_flags="-CN" # Newsyslog flags to create marked files 708mixer_enable="YES" # Run the sound mixer. 709opensm_enable="NO" # Opensm(8) for infiniband devices defaults to off 710 711# rctl(8) requires kernel options RACCT and RCTL 712rctl_enable="YES" # Load rctl(8) rules on boot 713rctl_rules="/etc/rctl.conf" # rctl(8) ruleset. See rctl.conf(5). 714 715iovctl_files="" # Config files for iovctl(8) 716 717############################################################## 718### Jail Configuration (see rc.conf(5) manual page) ########## 719############################################################## 720jail_enable="NO" # Set to NO to disable starting of any jails 721jail_conf="/etc/jail.conf" # Configuration file for jail(8) 722jail_confwarn="YES" # Prevent warning about obsolete per-jail configuration 723jail_parallel_start="NO" # Start jails in the background 724jail_list="" # Space separated list of names of jails 725jail_reverse_stop="NO" # Stop jails in reverse order 726 727############################################################## 728### Define source_rc_confs, the mechanism used by /etc/rc.* ## 729### scripts to source rc_conf_files overrides safely. ## 730############################################################## 731 732if [ -z "${source_rc_confs_defined}" ]; then 733 source_rc_confs_defined=yes 734 source_rc_confs() { 735 local i sourced_files 736 for i in ${rc_conf_files}; do 737 case ${sourced_files} in 738 *:$i:*) 739 ;; 740 *) 741 sourced_files="${sourced_files}:$i:" 742 if [ -r $i ]; then 743 . $i 744 fi 745 ;; 746 esac 747 done 748 # Re-do process to pick up [possibly] redefined $rc_conf_files 749 for i in ${rc_conf_files}; do 750 case ${sourced_files} in 751 *:$i:*) 752 ;; 753 *) 754 sourced_files="${sourced_files}:$i:" 755 if [ -r $i ]; then 756 . $i 757 fi 758 ;; 759 esac 760 done 761 } 762fi 763 764# Allow vendors to override FreeBSD defaults in /etc/default/rc.conf 765# without the need to carefully manage /etc/rc.conf. 766if [ -r /etc/defaults/vendor.conf ]; then 767 . /etc/defaults/vendor.conf 768fi 769