xref: /freebsd/libexec/rc/rc.conf (revision 0d8fe2373503aeac48492f28073049a8bfa4feb5)
1#!/bin/sh
2
3# This is rc.conf - a file full of useful variables that you can set
4# to change the default startup behavior of your system.  You should
5# not edit this file!  Put any overrides into one of the ${rc_conf_files}
6# instead and you will be able to update these defaults later without
7# spamming your local configuration information.
8#
9# The ${rc_conf_files} files should only contain values which override
10# values set in this file.  This eases the upgrade path when defaults
11# are changed and new features are added.
12#
13# All arguments must be in double or single quotes.
14#
15# For a more detailed explanation of all the rc.conf variables, please
16# refer to the rc.conf(5) manual page.
17#
18# $FreeBSD$
19
20##############################################################
21###  Important initial Boot-time options  ####################
22##############################################################
23
24# Set default value of _localbase if not previously set
25: ${_localbase:="/usr/local"}
26
27# rc_debug can't be set here without interferring with rc.subr's setting it
28# when the kenv variable rc.debug is set.
29#rc_debug="NO"		# Set to YES to enable debugging output from rc.d
30rc_info="NO"		# Enables display of informational messages at boot.
31rc_startmsgs="YES" 	# Show "Starting foo:" messages at boot
32rcshutdown_timeout="90" # Seconds to wait before terminating rc.shutdown
33early_late_divider="FILESYSTEMS"	# Script that separates early/late
34			# stages of the boot process.  Make sure you know
35			# the ramifications if you change this.
36			# See rc.conf(5) for more details.
37always_force_depends="NO"	# Set to check that indicated dependencies are
38				# running during boot (can increase boot time).
39
40apm_enable="NO"		# Set to YES to enable APM BIOS functions (or NO).
41apmd_enable="NO"	# Run apmd to handle APM event from userland.
42apmd_flags=""		# Flags to apmd (if enabled).
43ddb_enable="NO"		# Set to YES to load ddb scripts at boot.
44ddb_config="/etc/ddb.conf"	# ddb(8) config file.
45devd_enable="YES" 	# Run devd, to trigger programs on device tree changes.
46devd_flags=""		# Additional flags for devd(8).
47devmatch_enable="YES"	# Demand load kernel modules based on device ids.
48devmatch_blocklist=""	# List of modules (w/o .ko) to exclude from devmatch.
49#kld_list="" 		# Kernel modules to load after local disks are mounted
50kldxref_enable="YES"	# Build linker.hints files with kldxref(8).
51kldxref_clobber="NO"	# Overwrite old linker.hints at boot.
52kldxref_module_path=""	# Override kern.module_path. A ';'-delimited list.
53powerd_enable="NO" 	# Run powerd to lower our power usage.
54powerd_flags=""		# Flags to powerd (if enabled).
55tmpmfs="AUTO"		# Set to YES to always create an mfs /tmp, NO to never
56tmpsize="20m"		# Size of mfs /tmp if created
57tmpmfs_flags="-S"	# Extra mdmfs options for the mfs /tmp
58varmfs="AUTO"		# Set to YES to always create an mfs /var, NO to never
59varsize="32m"		# Size of mfs /var if created
60varmfs_flags="-S"	# Extra mount options for the mfs /var
61mfs_type="auto"		# "md", "tmpfs", "auto" to prefer tmpfs with md as fallback
62populate_var="AUTO"	# Set to YES to always (re)populate /var, NO to never
63cleanvar_enable="YES" 	# Clean the /var directory
64local_startup="${_localbase}/etc/rc.d" # startup script dirs.
65script_name_sep=" "	# Change if your startup scripts' names contain spaces
66rc_conf_files="/etc/rc.conf /etc/rc.conf.local"
67
68# ZFS support
69zfs_enable="NO"		# Set to YES to automatically mount ZFS file systems
70zfs_bootonce_activate="NO" # Set YES to make successful bootonce BE permanent
71
72# ZFSD support
73zfsd_enable="NO"	# Set to YES to automatically start the ZFS fault
74			# management daemon.
75
76gptboot_enable="YES"	# GPT boot success/failure reporting.
77
78# Experimental - test before enabling
79gbde_autoattach_all="NO" # YES automatically mounts gbde devices from fstab
80gbde_devices="NO" 	# Devices to automatically attach (list, or AUTO)
81gbde_attach_attempts="3" # Number of times to attempt attaching gbde devices
82gbde_lockdir="/etc"	# Where to look for gbde lockfiles
83
84# GELI disk encryption configuration.
85geli_devices=""		# List of devices to automatically attach in addition to
86			# GELI devices listed in /etc/fstab.
87geli_groups=""		# List of groups containing devices to automatically
88			# attach with the same keyfiles and passphrase
89geli_tries=""		# Number of times to attempt attaching geli device.
90			# If empty, kern.geom.eli.tries will be used.
91geli_default_flags=""	# Default flags for geli(8).
92geli_autodetach="YES"	# Automatically detach on last close.
93			# Providers are marked as such when all file systems are
94			# mounted.
95# Example use.
96#geli_devices="da1 mirror/home"
97#geli_da1_flags="-p -k /etc/geli/da1.keys"
98#geli_da1_autodetach="NO"
99#geli_mirror_home_flags="-k /etc/geli/home.keys"
100#geli_groups="storage backup"
101#geli_storage_flags="-k /etc/geli/storage.keys"
102#geli_storage_devices="ada0 ada1"
103#geli_backup_flags="-j /etc/geli/backup.passfile -k /etc/geli/backup.keys"
104#geli_backup_devices="ada2 ada3"
105
106root_rw_mount="YES"	# Set to NO to inhibit remounting root read-write.
107root_hold_delay="30"	# Time to wait for root mount hold release.
108fsck_flags="-p"		# May be changed to -f (or -f -y) to force a full fsck
109fsck_y_enable="NO"	# Set to YES to do fsck -y if the initial preen fails.
110fsck_y_flags="-T ffs:-R -T ufs:-R"	# Additional flags for fsck -y
111background_fsck="YES"	# Attempt to run fsck in the background where possible.
112background_fsck_delay="60" # Time to wait (seconds) before starting the fsck.
113growfs_enable="NO"	# Set to YES to attempt to grow the root filesystem on boot
114netfs_types="nfs:NFS smbfs:SMB" # Net filesystems.
115extra_netfs_types="NO"	# List of network extra filesystem types for delayed
116			# mount at startup (or NO).
117
118##############################################################
119###  Network configuration sub-section  ######################
120##############################################################
121
122### Basic network and firewall/security options: ###
123hostname=""			# Set this!
124hostid_enable="YES"		# Set host UUID.
125hostid_file="/etc/hostid"	# File with hostuuid.
126nisdomainname="NO"		# Set to NIS domain if using NIS (or NO).
127dhclient_program="/sbin/dhclient"	# Path to dhcp client program.
128dhclient_flags=""		# Extra flags to pass to dhcp client.
129#dhclient_flags_em0=""		# Extra dhclient flags for em0 only
130background_dhclient="NO"	# Start dhcp client in the background.
131#background_dhclient_em0="YES"	# Start dhcp client on em0 in the background.
132synchronous_dhclient="NO"	# Start dhclient directly on configured
133				# interfaces during startup.
134defaultroute_delay="30"		# Time to wait for a default route on a DHCP interface.
135defaultroute_carrier_delay="5"	# Time to wait for carrier while waiting for a default route.
136netif_enable="YES"		# Set to YES to initialize network interfaces
137netif_ipexpand_max="2048"	# Maximum number of IP addrs in a range spec.
138wpa_supplicant_program="/usr/sbin/wpa_supplicant"
139wpa_supplicant_flags="-s"	# Extra flags to pass to wpa_supplicant
140wpa_supplicant_conf_file="/etc/wpa_supplicant.conf"
141#
142firewall_enable="NO"		# Set to YES to enable firewall functionality
143firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall
144firewall_type="UNKNOWN"		# Firewall type (see /etc/rc.firewall)
145firewall_quiet="NO"		# Set to YES to suppress rule display
146firewall_logging="NO"		# Set to YES to enable events logging
147firewall_logif="NO"		# Set to YES to create logging-pseudo interface
148firewall_flags=""		# Flags passed to ipfw when type is a file
149firewall_coscripts=""		# List of executables/scripts to run after
150				# firewall starts/stops
151firewall_client_net="192.0.2.0/24" # IPv4 Network address for "client"
152				# firewall.
153#firewall_client_net_ipv6="2001:db8:2:1::/64" # IPv6 network prefix for
154				# "client" firewall.
155firewall_simple_iif="em1"	# Inside network interface for "simple"
156				# firewall.
157firewall_simple_inet="192.0.2.16/28" # Inside network address for "simple"
158				# firewall.
159firewall_simple_oif="em0"	# Outside network interface for "simple"
160				# firewall.
161firewall_simple_onet="192.0.2.0/28" # Outside network address for "simple"
162				# firewall.
163#firewall_simple_iif_ipv6="em1"	# Inside IPv6 network interface for "simple"
164				# firewall.
165#firewall_simple_inet_ipv6="2001:db8:2:800::/56" # Inside IPv6 network prefix
166				# for "simple" firewall.
167#firewall_simple_oif_ipv6="em0"	# Outside IPv6 network interface for "simple"
168				# firewall.
169#firewall_simple_onet_ipv6="2001:db8:2:0::/56" # Outside IPv6 network prefix
170				# for "simple" firewall.
171firewall_myservices=""		# List of ports/protocols on which this host
172				# offers services for "workstation" firewall.
173firewall_allowservices=""	# List of IPs which have access to
174				# $firewall_myservices for "workstation"
175				# firewall.
176firewall_trusted=""		# List of IPs which have full access to this
177				# host for "workstation" firewall.
178firewall_logdeny="NO"		# Set to YES to log default denied incoming
179				# packets for "workstation" firewall.
180firewall_nologports="135-139,445 1026,1027 1433,1434" # List of TCP/UDP ports
181				# for which denied incoming packets are not
182				# logged for "workstation" firewall.
183firewall_nat_enable="NO"	# Enable kernel NAT (if firewall_enable == YES)
184firewall_nat_interface=""	# Public interface or IPaddress to use
185firewall_nat_flags=""		# Additional configuration parameters
186firewall_nat64_enable="NO"	# Enable kernel NAT64 module.
187firewall_nptv6_enable="NO"	# Enable kernel NPTv6 module.
188firewall_pmod_enable="NO"	# Enable kernel protocols modification module.
189dummynet_enable="NO"		# Load the dummynet(4) module
190ipfw_netflow_enable="NO"	# Enable netflow logging via ng_netflow
191ip_portrange_first="NO"		# Set first dynamically allocated port
192ip_portrange_last="NO"		# Set last dynamically allocated port
193ike_enable="NO"			# Enable IKE daemon (usually racoon or isakmpd)
194ike_program="${_localbase}/sbin/isakmpd"	# Path to IKE daemon
195ike_flags=""			# Additional flags for IKE daemon
196ipsec_enable="NO"		# Set to YES to run setkey on ipsec_file
197ipsec_file="/etc/ipsec.conf"	# Name of config file for setkey
198natd_program="/sbin/natd"	# path to natd, if you want a different one.
199natd_enable="NO"		# Enable natd (if firewall_enable == YES).
200natd_interface=""		# Public interface or IPaddress to use.
201natd_flags=""			# Additional flags for natd.
202ipfilter_enable="NO"		# Set to YES to enable ipfilter functionality
203ipfilter_program="/sbin/ipf"	# where the ipfilter program lives
204ipfilter_rules="/etc/ipf.rules"	# rules definition file for ipfilter, see
205				# /usr/src/contrib/ipfilter/rules for examples
206ipfilter_flags=""		# additional flags for ipfilter
207ippool_enable="NO"		# Set to YES to enable ip filter pools
208ippool_program="/sbin/ippool"	# where the ippool program lives
209ippool_rules="/etc/ippool.tables"	# rules definition file for ippool
210ippool_flags=""			# additional flags for ippool
211ipnat_enable="NO"		# Set to YES to enable ipnat functionality
212ipnat_program="/sbin/ipnat"	# where the ipnat program lives
213ipnat_rules="/etc/ipnat.rules"	# rules definition file for ipnat
214ipnat_flags=""			# additional flags for ipnat
215ipmon_enable="NO"		# Set to YES for ipmon; needs ipfilter or ipnat
216ipmon_program="/sbin/ipmon"	# where the ipfilter monitor program lives
217ipmon_flags="-Ds"		# typically "-Ds" or "-D /var/log/ipflog"
218ipfs_enable="NO"		# Set to YES to enable saving and restoring
219				# of state tables at shutdown and boot
220ipfs_program="/sbin/ipfs"	# where the ipfs program lives
221ipfs_flags=""			# additional flags for ipfs
222pf_enable="NO"			# Set to YES to enable packet filter (pf)
223pf_rules="/etc/pf.conf"		# rules definition file for pf (nonexistent
224				# by default)
225pf_program="/sbin/pfctl"	# where the pfctl program lives
226pf_flags=""			# additional flags for pfctl
227pflog_enable="NO"		# Set to YES to enable packet filter logging
228pflog_logfile="/var/log/pflog"	# where pflogd should store the logfile
229pflog_program="/sbin/pflogd"	# where the pflogd program lives
230pflog_flags=""			# additional flags for pflogd
231ftpproxy_enable="NO"		# Set to YES to enable ftp-proxy(8) for pf
232ftpproxy_flags=""		# additional flags for ftp-proxy(8)
233pfsync_enable="NO"		# Expose pf state to other hosts for syncing
234pfsync_syncdev=""		# Interface for pfsync to work through
235pfsync_syncpeer=""		# IP address of pfsync peer host
236pfsync_ifconfig=""		# Additional options to ifconfig(8) for pfsync
237tcp_extensions="YES"		# Set to NO to turn off RFC1323 extensions.
238log_in_vain="0"			# >=1 to log connects to ports w/o listeners.
239tcp_keepalive="YES"		# Enable stale TCP connection timeout (or NO).
240tcp_drop_synfin="NO"		# Set to YES to drop TCP packets with SYN+FIN
241				# NOTE: this violates the TCP specification
242icmp_drop_redirect="auto" 	# Set to YES to ignore ICMP REDIRECT packets
243icmp_log_redirect="NO"		# Set to YES to log ICMP REDIRECT packets
244network_interfaces="auto"	# List of network interfaces (or "auto").
245cloned_interfaces=""		# List of cloned network interfaces to create.
246#cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config.
247#ifconfig_lo0="inet 127.0.0.1"	# default loopback device configuration.
248#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry.
249#ifconfig_em0_ipv6="inet6 2001:db8:1::1 prefixlen 64" # Sample IPv6 addr entry
250#ifconfig_em0_alias0="inet6 2001:db8:2::1 prefixlen 64" # Sample IPv6 alias
251#ifconfig_em0_name="net0"	# Change interface name from em0 to net0.
252#vlans_em0="101 vlan0"		# vlan(4) interfaces for em0 device
253#create_args_vlan0="vlan 102"	# vlan tag for vlan0 device
254#wlans_ath0="wlan0"		# wlan(4) interfaces for ath0 device
255#wlandebug_wlan0="scan+auth+assoc"	# Set debug flags with wlandebug(8)
256#ipv4_addrs_em0="192.168.0.1/24 192.168.1.1-5/28" # example IPv4 address entry.
257#
258#autobridge_interfaces="bridge0"	# List of bridges to check
259#autobridge_bridge0="tap* vlan0"	# Interface glob to automatically add to the bridge
260#
261# If you have any sppp(4) interfaces above, you might also want to set
262# the following parameters.  Refer to spppcontrol(8) for their meaning.
263sppp_interfaces=""		# List of sppp interfaces.
264#sppp_interfaces="...0"		# example: sppp over ...
265#spppconfig_...0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'"
266
267# User ppp configuration.
268ppp_enable="NO"		# Start user-ppp (or NO).
269ppp_program="/usr/sbin/ppp"	# Path to user-ppp program.
270ppp_mode="auto"		# Choice of "auto", "ddial", "direct" or "dedicated".
271			# For details see man page for ppp(8). Default is auto.
272ppp_nat="YES"		# Use PPP's internal network address translation or NO.
273ppp_profile="papchap"	# Which profile to use from /etc/ppp/ppp.conf.
274ppp_user="root"		# Which user to run ppp as
275
276# Start multiple instances of ppp at boot time
277#ppp_profile="profile1 profile2 profile3"	# Which profiles to use
278#ppp_profile1_mode="ddial"	# Override ppp mode for profile1
279#ppp_profile2_nat="NO"		# Override nat mode for profile2
280# profile3 uses default ppp_mode and ppp_nat
281
282### Network daemon (miscellaneous) ###
283hostapd_program="/usr/sbin/hostapd"
284hostapd_enable="NO"		# Run hostap daemon.
285syslogd_enable="YES"		# Run syslog daemon (or NO).
286syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one.
287syslogd_flags="-s"		# Flags to syslogd (if enabled).
288syslogd_oomprotect="YES"	# Don't kill syslogd when swap space is exhausted.
289altlog_proglist=""		# List of chrooted applicatioins in /var
290inetd_enable="NO"		# Run the network daemon dispatcher (YES/NO).
291inetd_program="/usr/sbin/inetd"	# path to inetd, if you want a different one.
292inetd_flags="-wW -C 60"		# Optional flags to inetd
293iscsid_enable="NO"		# iSCSI initiator daemon.
294iscsictl_enable="NO"		# iSCSI initiator autostart.
295iscsictl_flags="-Aa"		# Optional flags to iscsictl.
296hastd_enable="NO"		# Run the HAST daemon (YES/NO).
297hastd_program="/sbin/hastd"	# path to hastd, if you want a different one.
298hastd_flags=""			# Optional flags to hastd.
299ctld_enable="NO"		# CAM Target Layer / iSCSI target daemon.
300local_unbound_enable="NO"	# Local caching resolver
301local_unbound_tls="NO"		# Use DNS over TLS
302blacklistd_enable="NO"		# Run blacklistd daemon (YES/NO).
303blacklistd_flags=""		# Optional flags for blacklistd(8).
304resolv_enable="YES"		# Enable resolv / resolvconf
305
306#
307# kerberos. Do not run the admin daemons on slave servers
308#
309kdc_enable="NO"			# Run a kerberos 5 KDC (or NO).
310kdc_program="/usr/libexec/kdc"	# path to kerberos 5 KDC
311kdc_flags=""			# Additional flags to the kerberos 5 KDC
312kadmind_enable="NO"		# Run kadmind (or NO)
313kadmind_program="/usr/libexec/kadmind"	# path to kadmind
314kpasswdd_enable="NO"		# Run kpasswdd (or NO)
315kpasswdd_program="/usr/libexec/kpasswdd" # path to kpasswdd
316kfd_enable="NO"			# Run kfd (or NO)
317kfd_program="/usr/libexec/kfd"	# path to kerberos 5 kfd daemon
318kfd_flags=""
319ipropd_master_enable="NO"	# Run Heimdal incremental propagation daemon
320				# (master daemon).
321ipropd_master_program="/usr/libexec/ipropd-master"
322ipropd_master_flags=""		# Flags to ipropd-master.
323ipropd_master_keytab="/etc/krb5.keytab"	# keytab for ipropd-master.
324ipropd_master_slaves=""		# slave node names used for /var/heimdal/slaves.
325ipropd_slave_enable="NO"	# Run Heimdal incremental propagation daemon
326				# (slave daemon).
327ipropd_slave_program="/usr/libexec/ipropd-slave"
328ipropd_slave_flags=""		# Flags to ipropd-slave.
329ipropd_slave_keytab="/etc/krb5.keytab"	# keytab for ipropd-slave.
330ipropd_slave_master=""		# master node name.
331
332gssd_enable="NO"		# Run the gssd daemon (or NO).
333gssd_program="/usr/sbin/gssd"	# Path to gssd.
334gssd_flags=""			# Flags for gssd.
335
336rwhod_enable="NO"		# Run the rwho daemon (or NO).
337rwhod_flags=""			# Flags for rwhod
338rarpd_enable="NO"		# Run rarpd (or NO).
339rarpd_flags="-a"		# Flags to rarpd.
340bootparamd_enable="NO"		# Run bootparamd (or NO).
341bootparamd_flags=""		# Flags to bootparamd
342pppoed_enable="NO"		# Run the PPP over Ethernet daemon.
343pppoed_provider="*"		# Provider and ppp(8) config file entry.
344pppoed_flags="-P /var/run/pppoed.pid"	# Flags to pppoed (if enabled).
345pppoed_interface="em0"		# The interface that pppoed runs on.
346sshd_enable="NO"		# Enable sshd
347sshd_program="/usr/sbin/sshd"	# path to sshd, if you want a different one.
348sshd_flags=""			# Additional flags for sshd.
349ftpd_enable="NO"		# Enable stand-alone ftpd.
350ftpd_program="/usr/libexec/ftpd" # Path to ftpd, if you want a different one.
351ftpd_flags=""			# Additional flags to stand-alone ftpd.
352
353### Network daemon (NFS): All need rpcbind_enable="YES" ###
354amd_enable="NO"			# Run amd service with $amd_flags (or NO).
355amd_program="/usr/sbin/amd"	# path to amd, if you want a different one.
356amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map"
357amd_map_program="NO"		# Can be set to "ypcat -k amd.master"
358autofs_enable="NO"		# Run autofs daemons.
359automount_flags=""		# Flags to automount(8) (if autofs enabled).
360automountd_flags=""		# Flags to automountd(8) (if autofs enabled).
361autounmountd_flags=""		# Flags to autounmountd(8) (if autofs enabled).
362nfs_client_enable="NO"		# This host is an NFS client (or NO).
363nfs_access_cache="60"		# Client cache timeout in seconds
364nfs_server_enable="NO"		# This host is an NFS server (or NO).
365nfs_server_flags="-u -t"	# Flags to nfsd (if enabled).
366nfs_server_managegids="NO"	# The NFS server maps gids for AUTH_SYS (or NO).
367mountd_enable="NO"		# Run mountd (or NO).
368mountd_flags="-r -S"		# Flags to mountd (if NFS server enabled).
369weak_mountd_authentication="NO"	# Allow non-root mount requests to be served.
370nfs_reserved_port_only="NO"	# Provide NFS only on secure port (or NO).
371nfs_bufpackets=""		# bufspace (in packets) for client
372rpc_lockd_enable="NO"		# Run NFS rpc.lockd needed for client/server.
373rpc_lockd_flags=""		# Flags to rpc.lockd (if enabled).
374rpc_statd_enable="NO"		# Run NFS rpc.statd needed for client/server.
375rpc_statd_flags=""		# Flags to rpc.statd (if enabled).
376rpcbind_enable="NO"		# Run the portmapper service (YES/NO).
377rpcbind_program="/usr/sbin/rpcbind"	# path to rpcbind, if you want a different one.
378rpcbind_flags=""		# Flags to rpcbind (if enabled).
379rpc_ypupdated_enable="NO"	# Run if NIS master and SecureRPC (or NO).
380keyserv_enable="NO"		# Run the SecureRPC keyserver (or NO).
381keyserv_flags=""		# Flags to keyserv (if enabled).
382nfsv4_server_enable="NO"	# Enable support for NFSv4
383nfsv4_server_only="NO"		# Set NFS server to NFSv4 only
384nfscbd_enable="NO"		# NFSv4 client side callback daemon
385nfscbd_flags=""			# Flags for nfscbd
386nfsuserd_enable="NO"		# NFSv4 user/group name mapping daemon
387nfsuserd_flags=""		# Flags for nfsuserd
388tlsclntd_enable="NO"		# Run rpc.tlsclntd needed for NFS-over-TLS mount
389tlsclntd_flags=""		# Flags for rpc.tlsclntd
390tlsservd_enable="NO"		# Run rpc.tlsservd needed for NFS-over-TLS nfsd
391tlsservd_flags=""		# Flags for rpc.tlsservd
392
393### Network Time Services options: ###
394ntpdate_enable="NO"		# Run ntpdate to sync time on boot (or NO).
395ntpdate_program="/usr/sbin/ntpdate"	# path to ntpdate, if you want a different one.
396ntpdate_flags="-b"		# Flags to ntpdate (if enabled).
397ntpdate_config="/etc/ntp.conf"	# ntpdate(8) configuration file
398ntpdate_hosts=""		# Whitespace-separated list of ntpdate(8) servers.
399ntpd_enable="NO"		# Run ntpd Network Time Protocol (or NO).
400ntpd_program="/usr/sbin/ntpd"	# path to ntpd, if you want a different one.
401ntpd_config="/etc/ntp.conf"	# ntpd(8) configuration file
402ntpd_sync_on_start="NO"		# Sync time on ntpd startup, even if offset is high
403ntpd_flags=""			# Additional flags to ntpd
404ntp_src_leapfile="/etc/ntp/leap-seconds"
405				# Initial source for ntpd leapfile
406ntp_db_leapfile="/var/db/ntpd.leap-seconds.list"
407				# Working copy (updated weekly) leapfile
408ntp_leapfile_sources="https://www.ietf.org/timezones/data/leap-seconds.list"
409				# Source from which to fetch leapfile
410ntp_leapfile_fetch_opts="-mq"	# Options to use for ntp leapfile fetch,
411				# e.g. --no-verify-peer
412ntp_leapfile_expiry_days=30	# Check for new leapfile 30 days prior to
413				# expiry.
414ntp_leapfile_fetch_verbose="NO"	# Be verbose during NTP leapfile fetch
415
416# Network Information Services (NIS) options: All need rpcbind_enable="YES" ###
417nis_client_enable="NO"		# We're an NIS client (or NO).
418nis_client_flags=""		# Flags to ypbind (if enabled).
419nis_ypset_enable="NO"		# Run ypset at boot time (or NO).
420nis_ypset_flags=""		# Flags to ypset (if enabled).
421nis_server_enable="NO"		# We're an NIS server (or NO).
422nis_server_flags=""		# Flags to ypserv (if enabled).
423nis_ypxfrd_enable="NO"		# Run rpc.ypxfrd at boot time (or NO).
424nis_ypxfrd_flags=""		# Flags to rpc.ypxfrd (if enabled).
425nis_yppasswdd_enable="NO"	# Run rpc.yppasswdd at boot time (or NO).
426nis_yppasswdd_flags=""		# Flags to rpc.yppasswdd (if enabled).
427nis_ypldap_enable="NO"		# Run ypldap at boot time (or NO).
428nis_ypldap_flags=""		# Flags to ypldap (if enabled).
429
430### SNMP daemon ###
431# Be sure to understand the security implications of running SNMP v1/v2
432# in your network.
433bsnmpd_enable="NO"		# Run the SNMP daemon (or NO).
434bsnmpd_flags=""			# Flags for bsnmpd.
435
436### Network routing options: ###
437defaultrouter="NO"		# Set to default gateway (or NO).
438#defaultrouter_fibN="192.0.2.1"	# Use this form to set a gateway for FIB N
439static_arp_pairs=""		# Set to static ARP list (or leave empty).
440static_ndp_pairs=""		# Set to static NDP list (or leave empty).
441static_routes=""		# Set to static route list (or leave empty).
442gateway_enable="NO"		# Set to YES if this host will be a gateway.
443routed_enable="NO"		# Set to YES to enable a routing daemon.
444routed_program="/sbin/routed"	# Name of routing daemon to use if enabled.
445routed_flags="-q"		# Flags for routing daemon.
446arpproxy_all="NO"		# replaces obsolete kernel option ARP_PROXYALL.
447forward_sourceroute="NO"	# do source routing (only if gateway_enable is set to "YES")
448accept_sourceroute="NO"		# accept source routed packets to us
449
450### Bluetooth ###
451hcsecd_enable="NO"		# Enable hcsecd(8) (or NO)
452hcsecd_config="/etc/bluetooth/hcsecd.conf" # hcsecd(8) configuration file
453
454sdpd_enable="NO"		# Enable sdpd(8) (or NO)
455sdpd_control="/var/run/sdp"	# sdpd(8) control socket
456sdpd_groupname="nobody"		# set spdp(8) user/group to run as after
457sdpd_username="nobody"		# it initializes
458
459bthidd_enable="NO"		# Enable bthidd(8) (or NO)
460bthidd_config="/etc/bluetooth/bthidd.conf" # bthidd(8) configuration file
461bthidd_hids="/var/db/bthidd.hids" # bthidd(8) known HID devices file
462bthidd_evdev_support="AUTO"	# AUTO depends on EVDEV_SUPPORT kernel option
463
464rfcomm_pppd_server_enable="NO"	# Enable rfcomm_pppd(8) in server mode (or NO)
465rfcomm_pppd_server_profile="one two"	# Profile to use from /etc/ppp/ppp.conf
466#
467#rfcomm_pppd_server_one_bdaddr=""	# Override local bdaddr for 'one'
468rfcomm_pppd_server_one_channel="1"	# Override local channel for 'one'
469#rfcomm_pppd_server_one_register_sp="NO"	# Override SP and DUN register
470#rfcomm_pppd_server_one_register_dun="NO"	# for 'one'
471#
472#rfcomm_pppd_server_two_bdaddr=""	# Override local bdaddr for 'two'
473rfcomm_pppd_server_two_channel="3"	# Override local channel for 'two'
474#rfcomm_pppd_server_two_register_sp="NO"	# Override SP and DUN register
475#rfcomm_pppd_server_two_register_dun="NO"	# for 'two'
476
477ubthidhci_enable="NO"		# Switch an USB BT controller present on
478#ubthidhci_busnum="3"		# bus 3 and addr 2 from HID mode to HCI mode.
479#ubthidhci_addr="2"		# Check usbconfig list to find the correct
480				# numbers for your system.
481
482### Network link/usability verification options
483netwait_enable="NO"		# Enable rc.d/netwait (or NO)
484#netwait_ip=""			# Wait for ping response from any IP in this list.
485netwait_timeout="60"		# Total number of seconds to perform pings.
486#netwait_if=""			# Wait for active link on each intf in this list.
487netwait_if_timeout="30"		# Total number of seconds to monitor link state.
488
489### Miscellaneous network options: ###
490icmp_bmcastecho="NO"	# respond to broadcast ping packets
491
492### IPv6 options: ###
493ipv6_network_interfaces="auto"	# List of IPv6 network interfaces
494				# (or "auto" or "none").
495ipv6_activate_all_interfaces="NO"	# If NO, interfaces which have no
496					# corresponding $ifconfig_IF_ipv6 is
497					# marked as IFDISABLED for security
498					# reason.
499ipv6_defaultrouter="NO"		# Set to IPv6 default gateway (or NO).
500#ipv6_defaultrouter="2002:c058:6301::"	# Use this for 6to4 (RFC 3068)
501#ipv6_defaultrouter_fibN="2001:db8::"	# Use this form to set a gateway for FIB N
502ipv6_static_routes=""		# Set to static route list (or leave empty).
503#ipv6_static_routes="xxx"	# An example to set fec0:0000:0000:0006::/64
504				#  route toward loopback interface.
505#ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1"
506ipv6_gateway_enable="NO"	# Set to YES if this host will be a gateway.
507ipv6_cpe_wanif="NO"		# Set to the upstream interface name if this
508				# node will work as a router to forward IPv6
509				# packets not explicitly addressed to itself.
510ipv6_privacy="NO"		# Use privacy address on RA-receiving IFs
511				# (RFC 4941)
512
513route6d_enable="NO"		# Set to YES to enable an IPv6 routing daemon.
514route6d_program="/usr/sbin/route6d"	# Name of IPv6 routing daemon.
515route6d_flags=""		# Flags to IPv6 routing daemon.
516#route6d_flags="-l"		# Example for route6d with only IPv6 site local
517				# addrs.
518#route6d_flags="-q"		# If you want to run a routing daemon on an end
519				# node, you should stop advertisement.
520#ipv6_network_interfaces="em0 em1"	# Examples for router
521					# or static configuration for end node.
522					# Choose correct prefix value.
523#ipv6_prefix_em0="fec0:0000:0000:0001 fec0:0000:0000:0002"  # Examples for rtr.
524#ipv6_prefix_em1="fec0:0000:0000:0003 fec0:0000:0000:0004"  # Examples for rtr.
525ipv6_default_interface="NO"	# Default output interface for scoped addrs.
526				# This works only with
527				# ipv6_gateway_enable="NO".
528rtsol_flags=""			# Flags to IPv6 router solicitation.
529rtsold_enable="NO"		# Set to YES to enable an IPv6 router
530				# solicitation daemon.
531rtsold_flags="-a"		# Flags to an IPv6 router solicitation
532				# daemon.
533rtadvd_enable="NO"		# Set to YES to enable an IPv6 router
534				# advertisement daemon. If set to YES,
535				# this router becomes a possible candidate
536				# IPv6 default router for local subnets.
537rtadvd_interfaces=""		# Interfaces rtadvd sends RA packets.
538stf_interface_ipv4addr=""	# Local IPv4 addr for 6to4 IPv6 over IPv4
539				# tunneling interface. Specify this entry
540				# to enable 6to4 interface.
541stf_interface_ipv4plen="0"	# Prefix length for 6to4 IPv4 addr,
542				# to limit peer addr range. Effective value
543				# is 0-31.
544stf_interface_ipv6_ifid="0:0:0:1"	# IPv6 interface id for stf0.
545				# If you like, you can set "AUTO" for this.
546stf_interface_ipv6_slaid="0000"	# IPv6 Site Level Aggregator for stf0
547ipv6_ipv4mapping="NO"		# Set to "YES" to enable IPv4 mapped IPv6 addr
548				# communication. (like ::ffff:a.b.c.d)
549ip6addrctl_enable="YES"	# Set to YES to enable default address selection
550ip6addrctl_verbose="NO"	# Set to YES to enable verbose configuration messages
551ip6addrctl_policy="AUTO"	# A pre-defined address selection policy
552				# (ipv4_prefer, ipv6_prefer, or AUTO)
553
554##############################################################
555###  System console options  #################################
556##############################################################
557
558keyboard=""		# keyboard device to use (default /dev/kbd0).
559keymap="NO"		# keymap in /usr/share/{syscons,vt}/keymaps/* (or NO).
560keyrate="NO"		# keyboard rate to: slow, normal, fast (or NO).
561keybell="NO" 		# See kbdcontrol(1) for options.  Use "off" to disable.
562keychange="NO"		# function keys default values (or NO).
563cursor="NO"		# cursor type {normal|blink|destructive} (or NO).
564scrnmap="NO"		# screen map in /usr/share/syscons/scrnmaps/* (or NO).
565font8x16="NO"		# font 8x16 from /usr/share/{syscons,vt}/fonts/* (or NO).
566font8x14="NO"		# font 8x14 from /usr/share/{syscons,vt}/fonts/* (or NO).
567font8x8="NO"		# font 8x8 from /usr/share/{syscons,vt}/fonts/* (or NO).
568blanktime="300"		# blank time (in seconds) or "NO" to turn it off.
569saver="NO"		# screen saver: Uses /boot/kernel/${saver}_saver.ko
570moused_nondefault_enable="YES" # Treat non-default mice as enabled unless
571			       # specifically overriden in rc.conf(5).
572moused_enable="NO"	# Run the mouse daemon.
573moused_type="auto"	# See man page for rc.conf(5) for available settings.
574moused_port="/dev/psm0"	# Set to your mouse port.
575moused_flags=""		# Any additional flags to moused.
576mousechar_start="NO"	# if 0xd0-0xd3 default range is occupied in your
577			# language code table, specify alternative range
578			# start like mousechar_start=3, see vidcontrol(1)
579allscreens_flags=""	# Set this vidcontrol mode for all virtual screens
580allscreens_kbdflags=""	# Set this kbdcontrol mode for all virtual screens
581
582##############################################################
583###  Mail Transfer Agent (MTA) options  ######################
584##############################################################
585
586mta_start_script="/etc/rc.sendmail"
587			# Script to start your chosen MTA, called by /etc/rc.
588# Settings for /etc/rc.sendmail and /etc/rc.d/sendmail:
589sendmail_enable="NO"	# Run the sendmail inbound daemon (YES/NO).
590sendmail_pidfile="/var/run/sendmail.pid"	# sendmail pid file
591sendmail_procname="/usr/sbin/sendmail"		# sendmail process name
592sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server)
593sendmail_cert_create="YES"	# Create a server certificate if none (YES/NO)
594#sendmail_cert_cn="CN"   	# CN of the generate certificate
595sendmail_submit_enable="YES"	# Start a localhost-only MTA for mail submission
596sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost"
597				# Flags for localhost-only MTA
598sendmail_outbound_enable="YES"	# Dequeue stuck mail (YES/NO).
599sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only)
600sendmail_msp_queue_enable="YES"	# Dequeue stuck clientmqueue mail (YES/NO).
601sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m"
602				# Flags for sendmail_msp_queue daemon.
603sendmail_rebuild_aliases="NO"	# Run newaliases if necessary (YES/NO).
604
605
606##############################################################
607###  Miscellaneous administrative options  ###################
608##############################################################
609
610auditd_enable="NO"	# Run the audit daemon.
611auditd_program="/usr/sbin/auditd"	# Path to the audit daemon.
612auditd_flags=""		# Which options to pass to the audit daemon.
613auditdistd_enable="NO"	# Run the audit daemon.
614auditdistd_program="/usr/sbin/auditdistd"	# Path to the auditdistd daemon.
615auditdistd_flags=""	# Which options to pass to the auditdistd daemon.
616cron_enable="YES"	# Run the periodic job daemon.
617cron_program="/usr/sbin/cron"	# Which cron executable to run (if enabled).
618cron_dst="YES"		# Handle DST transitions intelligently (YES/NO)
619cron_flags=""		# Which options to pass to the cron daemon.
620cfumass_enable="NO"	# Create default LUN for cfumass(4).
621cfumass_dir="/var/cfumass"	# File to LUN's contents.
622cfumass_image="/var/tmp/cfumass.img"	# LUN's backing file path.
623lpd_enable="NO"		# Run the line printer daemon.
624lpd_program="/usr/sbin/lpd"	# path to lpd, if you want a different one.
625lpd_flags=""		# Flags to lpd (if enabled).
626nscd_enable="NO"	# Run the nsswitch caching daemon.
627chkprintcap_enable="NO"	# Run chkprintcap(8) before running lpd.
628chkprintcap_flags="-d"	# Create missing directories by default.
629dumpdev="AUTO"		# Device to crashdump to (device name, AUTO, or NO).
630dumpon_flags=""		# Options to pass to dumpon(8), followed by dumpdev.
631dumpdir="/var/crash"	# Directory where crash dumps are to be stored
632savecore_enable="YES"	# Extract core from dump devices if any
633savecore_flags="-m 10"	# Used if dumpdev is enabled above, and present.
634			# By default, only the 10 most recent kernel dumps
635			# are saved.
636service_delete_empty="NO" # Have 'service delete' remove empty rc.conf.d files.
637crashinfo_enable="YES"	# Automatically generate crash dump summary.
638crashinfo_program="/usr/sbin/crashinfo"	# Script to generate crash dump summary.
639quota_enable="NO"	# turn on quotas on startup (or NO).
640check_quotas="YES"	# Check quotas on startup (or NO).
641quotaon_flags="-a"	# Turn quotas on for all file systems (if enabled)
642quotaoff_flags="-a"	# Turn quotas off for all file systems at shutdown
643quotacheck_flags="-a"	# Check all file system quotas (if enabled)
644accounting_enable="NO"	# Turn on process accounting (or NO).
645firstboot_sentinel="/firstboot"	# Scripts with "firstboot" keyword are run if
646			# this file exists.  Should be on a R/W filesystem so
647			# the file can be deleted after the boot completes.
648sysvipc_enable="NO"	# Load System V IPC primitives at startup (or NO).
649linux_enable="NO"	# Linux binary compatibility loaded at startup (or NO).
650linux_mounts_enable="YES" # If linux_enable is set to YES, mount Linux-specific
651			# filesystems at startup.
652clear_tmp_enable="NO"	# Clear /tmp at startup.
653clear_tmp_X="YES" 	# Clear and recreate X11-related directories in /tmp
654ldconfig_insecure="NO"	# Set to YES to disable ldconfig security checks
655ldconfig_paths="/usr/lib/compat ${_localbase}/lib ${_localbase}/lib/compat/pkg"
656			# shared library search paths
657ldconfig32_paths="/usr/lib32 /usr/lib32/compat"
658			# 32-bit compatibility shared library search paths
659ldconfigsoft_paths="/usr/libsoft /usr/libsoft/compat ${_localbase}/libsoft"
660			# soft float compatibility shared library search paths
661			# Note: temporarily with extra stuff for transition
662ldconfig_local_dirs="${_localbase}/libdata/ldconfig"
663			# Local directories with ldconfig configuration files.
664ldconfig_local32_dirs="${_localbase}/libdata/ldconfig32"
665			# Local directories with 32-bit compatibility ldconfig
666			# configuration files.
667ldconfig_localsoft_dirs="${_localbase}/libdata/ldconfigsoft"
668			# Local directories with soft float compatibility ldconfig
669			# configuration files.
670kern_securelevel_enable="NO"	# kernel security level (see security(7))
671kern_securelevel="-1"	# range: -1..3 ; `-1' is the most insecure
672			# Note that setting securelevel to 0 will result
673			# in the system booting with securelevel set to 1, as
674			# init(8) will raise the level when rc(8) completes.
675update_motd="YES"	# update version info in /etc/motd (or NO)
676entropy_boot_file="/boot/entropy"	# Set to NO to disable very early
677			# (used at early boot time) entropy caching through reboots.
678entropy_file="/entropy"	# Set to NO to disable late (used when going multi-user)
679			# entropy through reboots.
680			# /var/db/entropy-file is preferred if / is not avail.
681entropy_dir="/var/db/entropy" # Set to NO to disable caching entropy via cron.
682entropy_save_sz="4096"	# Size of the entropy cache files.
683entropy_save_num="8"	# Number of entropy cache files to save.
684harvest_mask="511"	# Entropy device harvests all but the very invasive sources.
685			# (See 'sysctl kern.random.harvest' and random(4))
686osrelease_enable="YES"	# Update /var/run/os-release on boot (or NO).
687osrelease_file="/var/run/os-release" # File to update for os-release.
688osrelease_perms="444"	# Default permission for os-release file.
689dmesg_enable="YES"	# Save dmesg(8) to /var/run/dmesg.boot
690watchdogd_enable="NO"	# Start the software watchdog daemon
691watchdogd_flags=""	# Flags to watchdogd (if enabled)
692watchdogd_timeout=""	# watchdogd timeout, overrides -t in watchdogd_flags
693watchdogd_shutdown_timeout=""	# Timeout to use after watchdogd is stopped.
694				# Has effect only for system shutdown.
695				# Overrides -x in watchdogd_flags.
696devfs_rulesets="/etc/defaults/devfs.rules /etc/devfs.rules" # Files containing
697							    # devfs(8) rules.
698devfs_system_ruleset=""	# The name (NOT number) of a ruleset to apply to /dev
699devfs_set_rulesets=""	# A list of /mount/dev=ruleset_name settings to
700			# apply (must be mounted already, i.e. fstab(5))
701devfs_load_rulesets="YES"	# Enable to always load the default rulesets
702performance_cx_lowest="NONE"	# Online CPU idle state
703performance_cpu_freq="NONE"	# Online CPU frequency
704economy_cx_lowest="Cmax"	# Offline CPU idle state
705economy_cpu_freq="NONE"		# Offline CPU frequency
706virecover_enable="YES"	# Perform housekeeping for the vi(1) editor
707ugidfw_enable="NO"	# Load mac_bsdextended(4) rules on boot
708bsdextended_script="/etc/rc.bsdextended"	# Default mac_bsdextended(4)
709						# ruleset file.
710newsyslog_enable="YES"	# Run newsyslog at startup.
711newsyslog_flags="-CN"	# Newsyslog flags to create marked files
712mixer_enable="YES"	# Run the sound mixer.
713opensm_enable="NO"	# Opensm(8) for infiniband devices defaults to off
714
715# rctl(8) requires kernel options RACCT and RCTL
716rctl_enable="YES"		# Load rctl(8) rules on boot
717rctl_rules="/etc/rctl.conf"	# rctl(8) ruleset. See rctl.conf(5).
718
719iovctl_files=""		# Config files for iovctl(8)
720
721##############################################################
722### Jail Configuration (see rc.conf(5) manual page) ##########
723##############################################################
724jail_enable="NO"	# Set to NO to disable starting of any jails
725jail_conf="/etc/jail.conf"	# Configuration file for jail(8)
726jail_confwarn="YES"	# Prevent warning about obsolete per-jail configuration
727jail_parallel_start="NO"	# Start jails in the background
728jail_list=""		# Space separated list of names of jails
729jail_reverse_stop="NO"	# Stop jails in reverse order
730
731##############################################################
732### Define source_rc_confs, the mechanism used by /etc/rc.* ##
733### scripts to source rc_conf_files overrides safely.	    ##
734##############################################################
735
736if [ -z "${source_rc_confs_defined}" ]; then
737	source_rc_confs_defined=yes
738	source_rc_confs() {
739		local i sourced_files
740		for i in ${rc_conf_files}; do
741			case ${sourced_files} in
742			*:$i:*)
743				;;
744			*)
745				sourced_files="${sourced_files}:$i:"
746				if [ -r $i ]; then
747					. $i
748				fi
749				;;
750			esac
751		done
752		# Re-do process to pick up [possibly] redefined $rc_conf_files
753		for i in ${rc_conf_files}; do
754			case ${sourced_files} in
755			*:$i:*)
756				;;
757			*)
758				sourced_files="${sourced_files}:$i:"
759				if [ -r $i ]; then
760					. $i
761				fi
762				;;
763			esac
764		done
765	}
766fi
767
768# Allow vendors to override FreeBSD defaults in /etc/default/rc.conf
769# without the need to carefully manage /etc/rc.conf.
770if [ -r /etc/defaults/vendor.conf ]; then
771	. /etc/defaults/vendor.conf
772fi
773