1#!/bin/sh 2 3# This is rc.conf - a file full of useful variables that you can set 4# to change the default startup behavior of your system. You should 5# not edit this file! Put any overrides into one of the ${rc_conf_files} 6# instead and you will be able to update these defaults later without 7# spamming your local configuration information. 8# 9# The ${rc_conf_files} files should only contain values which override 10# values set in this file. This eases the upgrade path when defaults 11# are changed and new features are added. 12# 13# All arguments must be in double or single quotes. 14# 15# For a more detailed explanation of all the rc.conf variables, please 16# refer to the rc.conf(5) manual page. 17# 18# $FreeBSD$ 19 20############################################################## 21### Important initial Boot-time options #################### 22############################################################## 23 24# Set default value of _localbase if not previously set 25: ${_localbase:="/usr/local"} 26 27# rc_debug can't be set here without interferring with rc.subr's setting it 28# when the kenv variable rc.debug is set. 29#rc_debug="NO" # Set to YES to enable debugging output from rc.d 30rc_info="NO" # Enables display of informational messages at boot. 31rc_startmsgs="YES" # Show "Starting foo:" messages at boot 32rcshutdown_timeout="90" # Seconds to wait before terminating rc.shutdown 33early_late_divider="FILESYSTEMS" # Script that separates early/late 34 # stages of the boot process. Make sure you know 35 # the ramifications if you change this. 36 # See rc.conf(5) for more details. 37always_force_depends="NO" # Set to check that indicated dependencies are 38 # running during boot (can increase boot time). 39 40apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO). 41apmd_enable="NO" # Run apmd to handle APM event from userland. 42apmd_flags="" # Flags to apmd (if enabled). 43ddb_enable="NO" # Set to YES to load ddb scripts at boot. 44ddb_config="/etc/ddb.conf" # ddb(8) config file. 45devd_enable="YES" # Run devd, to trigger programs on device tree changes. 46devd_flags="" # Additional flags for devd(8). 47devmatch_enable="YES" # Demand load kernel modules based on device ids. 48devmatch_blocklist="" # List of modules (w/o .ko) to exclude from devmatch. 49#kld_list="" # Kernel modules to load after local disks are mounted 50kldxref_enable="YES" # Build linker.hints files with kldxref(8). 51kldxref_clobber="NO" # Overwrite old linker.hints at boot. 52kldxref_module_path="" # Override kern.module_path. A ';'-delimited list. 53powerd_enable="NO" # Run powerd to lower our power usage. 54powerd_flags="" # Flags to powerd (if enabled). 55tmpmfs="AUTO" # Set to YES to always create an mfs /tmp, NO to never 56tmpsize="20m" # Size of mfs /tmp if created 57tmpmfs_flags="-S" # Extra mdmfs options for the mfs /tmp 58varmfs="AUTO" # Set to YES to always create an mfs /var, NO to never 59varsize="32m" # Size of mfs /var if created 60varmfs_flags="-S" # Extra mount options for the mfs /var 61mfs_type="auto" # "md", "tmpfs", "auto" to prefer tmpfs with md as fallback 62populate_var="AUTO" # Set to YES to always (re)populate /var, NO to never 63cleanvar_enable="YES" # Clean the /var directory 64var_run_enable="NO" # Save/restore /var/run structure at shutdown/reboot 65var_run_autosave="NO" # Only restore /var/run structure at shutdown/reboot 66 # The user is expected to issue service var_run save to 67 # manually save the /var/run mtree 68var_run_mtree="/var/db/mtree/BSD.var-run.mtree" 69 # Where to save /var/run mtree 70local_startup="${_localbase}/etc/rc.d" # startup script dirs. 71script_name_sep=" " # Change if your startup scripts' names contain spaces 72rc_conf_files="/etc/rc.conf /etc/rc.conf.local" 73 74# ZFS support 75zfs_enable="NO" # Set to YES to automatically mount ZFS file systems 76zfskeys_enable="NO" # Set YES to autoload ZFS encryption keys 77zfs_bootonce_activate="NO" # Set YES to make successful bootonce BE permanent 78zpool_reguid="" # Set to zpools for which the GUID should be replaced 79 # upon first boot. 80zpool_upgrade="" # Set to zpools for which the version should be upgraded 81 # upon first boot. 82 83# ZFSD support 84zfsd_enable="NO" # Set to YES to automatically start the ZFS fault 85 # management daemon. 86 87gptboot_enable="YES" # GPT boot success/failure reporting. 88 89# Experimental - test before enabling 90gbde_autoattach_all="NO" # YES automatically mounts gbde devices from fstab 91gbde_devices="NO" # Devices to automatically attach (list, or AUTO) 92gbde_attach_attempts="3" # Number of times to attempt attaching gbde devices 93gbde_lockdir="/etc" # Where to look for gbde lockfiles 94 95# GELI disk encryption configuration. 96geli_devices="" # List of devices to automatically attach in addition to 97 # GELI devices listed in /etc/fstab. 98geli_groups="" # List of groups containing devices to automatically 99 # attach with the same keyfiles and passphrase 100geli_tries="" # Number of times to attempt attaching geli device. 101 # If empty, kern.geom.eli.tries will be used. 102geli_default_flags="" # Default flags for geli(8). 103geli_autodetach="YES" # Automatically detach on last close. 104 # Providers are marked as such when all file systems are 105 # mounted. 106# Example use. 107#geli_devices="da1 mirror/home" 108#geli_da1_flags="-p -k /etc/geli/da1.keys" 109#geli_da1_autodetach="NO" 110#geli_mirror_home_flags="-k /etc/geli/home.keys" 111#geli_groups="storage backup" 112#geli_storage_flags="-k /etc/geli/storage.keys" 113#geli_storage_devices="ada0 ada1" 114#geli_backup_flags="-j /etc/geli/backup.passfile -k /etc/geli/backup.keys" 115#geli_backup_devices="ada2 ada3" 116 117root_rw_mount="YES" # Set to NO to inhibit remounting root read-write. 118root_hold_delay="30" # Time to wait for root mount hold release. 119fsck_flags="-p" # May be changed to -f (or -f -y) to force a full fsck 120fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails. 121fsck_y_flags="-T ffs:-R -T ufs:-R" # Additional flags for fsck -y 122background_fsck="YES" # Attempt to run fsck in the background where possible. 123background_fsck_delay="60" # Time to wait (seconds) before starting the fsck. 124growfs_enable="NO" # Set to YES to attempt to grow the root filesystem on boot 125growfs_swap_size="" # Set to 0 to disable growfs swap, "" to default size, 126 # size in bytes to specify swap size. 127netfs_types="nfs:NFS smbfs:SMB" # Net filesystems. 128extra_netfs_types="NO" # List of network extra filesystem types for delayed 129 # mount at startup (or NO). 130 131############################################################## 132### Network configuration sub-section ###################### 133############################################################## 134 135### Basic network and firewall/security options: ### 136hostname="" # Set this! 137hostid_enable="YES" # Set host UUID. 138hostid_file="/etc/hostid" # File with hostuuid. 139nisdomainname="NO" # Set to NIS domain if using NIS (or NO). 140dhclient_program="/sbin/dhclient" # Path to dhcp client program. 141dhclient_flags="" # Extra flags to pass to dhcp client. 142#dhclient_flags_em0="" # Extra dhclient flags for em0 only 143background_dhclient="NO" # Start dhcp client in the background. 144#background_dhclient_em0="YES" # Start dhcp client on em0 in the background. 145synchronous_dhclient="NO" # Start dhclient directly on configured 146 # interfaces during startup. 147defaultroute_delay="30" # Time to wait for a default route on a DHCP interface. 148defaultroute_carrier_delay="5" # Time to wait for carrier while waiting for a default route. 149netif_enable="YES" # Set to YES to initialize network interfaces 150netif_ipexpand_max="2048" # Maximum number of IP addrs in a range spec. 151wpa_supplicant_program="/usr/sbin/wpa_supplicant" 152wpa_supplicant_flags="-s" # Extra flags to pass to wpa_supplicant 153wpa_supplicant_conf_file="/etc/wpa_supplicant.conf" 154# 155firewall_enable="NO" # Set to YES to enable firewall functionality 156firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall 157firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall) 158firewall_quiet="NO" # Set to YES to suppress rule display 159firewall_logging="NO" # Set to YES to enable events logging 160firewall_logif="NO" # Set to YES to create logging-pseudo interface 161firewall_flags="" # Flags passed to ipfw when type is a file 162firewall_coscripts="" # List of executables/scripts to run after 163 # firewall starts/stops 164firewall_client_net="192.0.2.0/24" # IPv4 Network address for "client" 165 # firewall. 166#firewall_client_net_ipv6="2001:db8:2:1::/64" # IPv6 network prefix for 167 # "client" firewall. 168firewall_simple_iif="em1" # Inside network interface for "simple" 169 # firewall. 170firewall_simple_inet="192.0.2.16/28" # Inside network address for "simple" 171 # firewall. 172firewall_simple_oif="em0" # Outside network interface for "simple" 173 # firewall. 174firewall_simple_onet="192.0.2.0/28" # Outside network address for "simple" 175 # firewall. 176#firewall_simple_iif_ipv6="em1" # Inside IPv6 network interface for "simple" 177 # firewall. 178#firewall_simple_inet_ipv6="2001:db8:2:800::/56" # Inside IPv6 network prefix 179 # for "simple" firewall. 180#firewall_simple_oif_ipv6="em0" # Outside IPv6 network interface for "simple" 181 # firewall. 182#firewall_simple_onet_ipv6="2001:db8:2:0::/56" # Outside IPv6 network prefix 183 # for "simple" firewall. 184firewall_myservices="" # List of ports/protocols on which this host 185 # offers services for "workstation" firewall. 186firewall_allowservices="" # List of IPs which have access to 187 # $firewall_myservices for "workstation" 188 # firewall. 189firewall_trusted="" # List of IPs which have full access to this 190 # host for "workstation" firewall. 191firewall_logdeny="NO" # Set to YES to log default denied incoming 192 # packets for "workstation" firewall. 193firewall_nologports="135-139,445 1026,1027 1433,1434" # List of TCP/UDP ports 194 # for which denied incoming packets are not 195 # logged for "workstation" firewall. 196firewall_nat_enable="NO" # Enable kernel NAT (if firewall_enable == YES) 197firewall_nat_interface="" # Public interface or IPaddress to use 198firewall_nat_flags="" # Additional configuration parameters 199firewall_nat64_enable="NO" # Enable kernel NAT64 module. 200firewall_nptv6_enable="NO" # Enable kernel NPTv6 module. 201firewall_pmod_enable="NO" # Enable kernel protocols modification module. 202dummynet_enable="NO" # Load the dummynet(4) module 203ipfw_netflow_enable="NO" # Enable netflow logging via ng_netflow 204ip_portrange_first="NO" # Set first dynamically allocated port 205ip_portrange_last="NO" # Set last dynamically allocated port 206ike_enable="NO" # Enable IKE daemon (usually racoon or isakmpd) 207ike_program="${_localbase}/sbin/isakmpd" # Path to IKE daemon 208ike_flags="" # Additional flags for IKE daemon 209ipsec_enable="NO" # Set to YES to run setkey on ipsec_file 210ipsec_file="/etc/ipsec.conf" # Name of config file for setkey 211natd_program="/sbin/natd" # path to natd, if you want a different one. 212natd_enable="NO" # Enable natd (if firewall_enable == YES). 213natd_interface="" # Public interface or IPaddress to use. 214natd_flags="" # Additional flags for natd. 215ipfilter_enable="NO" # Set to YES to enable ipfilter functionality 216ipfilter_program="/sbin/ipf" # where the ipfilter program lives 217ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see 218 # /usr/src/contrib/ipfilter/rules for examples 219ipfilter_flags="" # additional flags for ipfilter 220ippool_enable="NO" # Set to YES to enable ip filter pools 221ippool_program="/sbin/ippool" # where the ippool program lives 222ippool_rules="/etc/ippool.tables" # rules definition file for ippool 223ippool_flags="" # additional flags for ippool 224ipnat_enable="NO" # Set to YES to enable ipnat functionality 225ipnat_program="/sbin/ipnat" # where the ipnat program lives 226ipnat_rules="/etc/ipnat.rules" # rules definition file for ipnat 227ipnat_flags="" # additional flags for ipnat 228ipmon_enable="NO" # Set to YES for ipmon; needs ipfilter or ipnat 229ipmon_program="/sbin/ipmon" # where the ipfilter monitor program lives 230ipmon_flags="-Ds" # typically "-Ds" or "-D /var/log/ipflog" 231ipfs_enable="NO" # Set to YES to enable saving and restoring 232 # of state tables at shutdown and boot 233ipfs_program="/sbin/ipfs" # where the ipfs program lives 234ipfs_flags="" # additional flags for ipfs 235pf_enable="NO" # Set to YES to enable packet filter (pf) 236pf_rules="/etc/pf.conf" # rules definition file for pf (nonexistent 237 # by default) 238pf_program="/sbin/pfctl" # where the pfctl program lives 239pf_flags="" # additional flags for pfctl 240pf_fallback_rules_enable="NO" # fallback if loading ruleset fails 241pf_fallback_rules="block drop log all" # rules to load on pf ruleset failure 242#pf_fallback_rules="block drop log all 243#pass quick on em4" # multi-rule 244pf_fallback_rules_file="/etc/pf-fallback.conf" # rules file on ruleset failure 245pflog_enable="NO" # Set to YES to enable packet filter logging 246pflog_logfile="/var/log/pflog" # where pflogd should store the logfile 247pflog_program="/sbin/pflogd" # where the pflogd program lives 248pflog_flags="" # additional flags for pflogd 249dnctl_enable="NO" 250dnctl_program="/sbin/dnctl" 251dnctl_rules="/etc/dnctl.conf" 252ftpproxy_enable="NO" # Set to YES to enable ftp-proxy(8) for pf 253ftpproxy_flags="" # additional flags for ftp-proxy(8) 254pfsync_enable="NO" # Expose pf state to other hosts for syncing 255pfsync_syncdev="" # Interface for pfsync to work through 256pfsync_syncpeer="" # IP address of pfsync peer host 257pfsync_ifconfig="" # Additional options to ifconfig(8) for pfsync 258tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions. 259log_in_vain="0" # >=1 to log connects to ports w/o listeners. 260tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO). 261tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN 262 # NOTE: this violates the TCP specification 263icmp_drop_redirect="auto" # Set to YES to ignore ICMP REDIRECT packets 264icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets 265network_interfaces="auto" # List of network interfaces (or "auto"). 266cloned_interfaces="" # List of cloned network interfaces to create. 267#cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config. 268#ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. 269#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry. 270#ifconfig_em0_ipv6="inet6 2001:db8:1::1 prefixlen 64" # Sample IPv6 addr entry 271#ifconfig_em0_alias0="inet6 2001:db8:2::1 prefixlen 64" # Sample IPv6 alias 272#ifconfig_em0_name="net0" # Change interface name from em0 to net0. 273#vlans_em0="101 vlan0" # vlan(4) interfaces for em0 device 274#create_args_vlan0="vlan 102" # vlan tag for vlan0 device 275#wlans_ath0="wlan0" # wlan(4) interfaces for ath0 device 276#wlandebug_wlan0="scan+auth+assoc" # Set debug flags with wlandebug(8) 277#ipv4_addrs_em0="192.168.0.1/24 192.168.1.1-5/28" # example IPv4 address entry. 278# 279#autobridge_interfaces="bridge0" # List of bridges to check 280#autobridge_bridge0="tap* vlan0" # Interface glob to automatically add to the bridge 281 282# User ppp configuration. 283ppp_enable="NO" # Start user-ppp (or NO). 284ppp_program="/usr/sbin/ppp" # Path to user-ppp program. 285ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated". 286 # For details see man page for ppp(8). Default is auto. 287ppp_nat="YES" # Use PPP's internal network address translation or NO. 288ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf. 289ppp_user="root" # Which user to run ppp as 290 291# Start multiple instances of ppp at boot time 292#ppp_profile="profile1 profile2 profile3" # Which profiles to use 293#ppp_profile1_mode="ddial" # Override ppp mode for profile1 294#ppp_profile2_nat="NO" # Override nat mode for profile2 295# profile3 uses default ppp_mode and ppp_nat 296 297### Network daemon (miscellaneous) ### 298hostapd_program="/usr/sbin/hostapd" 299hostapd_enable="NO" # Run hostap daemon. 300syslogd_enable="YES" # Run syslog daemon (or NO). 301syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one. 302syslogd_flags="-s" # Flags to syslogd (if enabled). 303syslogd_oomprotect="YES" # Don't kill syslogd when swap space is exhausted. 304altlog_proglist="" # List of chrooted applicatioins in /var 305inetd_enable="NO" # Run the network daemon dispatcher (YES/NO). 306inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one. 307inetd_flags="-wW -C 60" # Optional flags to inetd 308iscsid_enable="NO" # iSCSI initiator daemon. 309iscsictl_enable="NO" # iSCSI initiator autostart. 310iscsictl_flags="-Aa" # Optional flags to iscsictl. 311hastd_enable="NO" # Run the HAST daemon (YES/NO). 312hastd_program="/sbin/hastd" # path to hastd, if you want a different one. 313hastd_flags="" # Optional flags to hastd. 314ggated_enable="NO" # Run the ggate daemon (YES/NO). 315ggated_config="/etc/gg.exports" # ggated(8) exports file. 316ggated_flags="" # Extra parameters like which port to bind to. 317ctld_enable="NO" # CAM Target Layer / iSCSI target daemon. 318local_unbound_enable="NO" # Local caching resolver 319local_unbound_tls="NO" # Use DNS over TLS 320blacklistd_enable="NO" # Run blacklistd daemon (YES/NO). 321blacklistd_flags="" # Optional flags for blacklistd(8). 322resolv_enable="YES" # Enable resolv / resolvconf 323 324# 325# kerberos. Do not run the admin daemons on slave servers 326# 327kdc_enable="NO" # Run a kerberos 5 KDC (or NO). 328kdc_program="/usr/libexec/kdc" # path to kerberos 5 KDC 329kdc_flags="" # Additional flags to the kerberos 5 KDC 330kadmind_enable="NO" # Run kadmind (or NO) 331kadmind_program="/usr/libexec/kadmind" # path to kadmind 332kpasswdd_enable="NO" # Run kpasswdd (or NO) 333kpasswdd_program="/usr/libexec/kpasswdd" # path to kpasswdd 334kfd_enable="NO" # Run kfd (or NO) 335kfd_program="/usr/libexec/kfd" # path to kerberos 5 kfd daemon 336kfd_flags="" 337ipropd_master_enable="NO" # Run Heimdal incremental propagation daemon 338 # (master daemon). 339ipropd_master_program="/usr/libexec/ipropd-master" 340ipropd_master_flags="" # Flags to ipropd-master. 341ipropd_master_keytab="/etc/krb5.keytab" # keytab for ipropd-master. 342ipropd_master_slaves="" # slave node names used for /var/heimdal/slaves. 343ipropd_slave_enable="NO" # Run Heimdal incremental propagation daemon 344 # (slave daemon). 345ipropd_slave_program="/usr/libexec/ipropd-slave" 346ipropd_slave_flags="" # Flags to ipropd-slave. 347ipropd_slave_keytab="/etc/krb5.keytab" # keytab for ipropd-slave. 348ipropd_slave_master="" # master node name. 349 350gssd_enable="NO" # Run the gssd daemon (or NO). 351gssd_program="/usr/sbin/gssd" # Path to gssd. 352gssd_flags="" # Flags for gssd. 353 354rwhod_enable="NO" # Run the rwho daemon (or NO). 355rwhod_flags="" # Flags for rwhod 356rarpd_enable="NO" # Run rarpd (or NO). 357rarpd_flags="-a" # Flags to rarpd. 358bootparamd_enable="NO" # Run bootparamd (or NO). 359bootparamd_flags="" # Flags to bootparamd 360pppoed_enable="NO" # Run the PPP over Ethernet daemon. 361pppoed_provider="*" # Provider and ppp(8) config file entry. 362pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled). 363pppoed_interface="em0" # The interface that pppoed runs on. 364sshd_enable="NO" # Enable sshd 365sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one. 366sshd_flags="" # Additional flags for sshd. 367ftpd_enable="NO" # Enable stand-alone ftpd. 368ftpd_program="/usr/libexec/ftpd" # Path to ftpd, if you want a different one. 369ftpd_flags="" # Additional flags to stand-alone ftpd. 370 371### Network daemon (NFS): All need rpcbind_enable="YES" ### 372autofs_enable="NO" # Run autofs daemons. 373automount_flags="" # Flags to automount(8) (if autofs enabled). 374automountd_flags="" # Flags to automountd(8) (if autofs enabled). 375autounmountd_flags="" # Flags to autounmountd(8) (if autofs enabled). 376nfs_client_enable="NO" # This host is an NFS client (or NO). 377nfs_access_cache="60" # Client cache timeout in seconds 378nfs_server_enable="NO" # This host is an NFS server (or NO). 379nfs_server_flags="-u -t" # Flags to nfsd (if enabled). 380nfs_server_managegids="NO" # The NFS server maps gids for AUTH_SYS (or NO). 381nfs_server_maxio="131072" # Maximum I/O size for the nfsd. 382mountd_enable="NO" # Run mountd (or NO). 383mountd_flags="-r -S" # Flags to mountd (if NFS server enabled). 384weak_mountd_authentication="NO" # Allow non-root mount requests to be served. 385nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO). 386nfs_bufpackets="" # bufspace (in packets) for client 387rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server. 388rpc_lockd_flags="" # Flags to rpc.lockd (if enabled). 389rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server. 390rpc_statd_flags="" # Flags to rpc.statd (if enabled). 391rpcbind_enable="NO" # Run the portmapper service (YES/NO). 392rpcbind_program="/usr/sbin/rpcbind" # path to rpcbind, if you want a different one. 393rpcbind_flags="" # Flags to rpcbind (if enabled). 394rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO). 395keyserv_enable="NO" # Run the SecureRPC keyserver (or NO). 396keyserv_flags="" # Flags to keyserv (if enabled). 397nfsv4_server_enable="NO" # Enable support for NFSv4 398nfsv4_server_only="NO" # Set NFS server to NFSv4 only 399nfscbd_enable="NO" # NFSv4 client side callback daemon 400nfscbd_flags="" # Flags for nfscbd 401nfsuserd_enable="NO" # NFSv4 user/group name mapping daemon 402nfsuserd_flags="" # Flags for nfsuserd 403tlsclntd_enable="NO" # Run rpc.tlsclntd needed for NFS-over-TLS mount 404tlsclntd_flags="" # Flags for rpc.tlsclntd 405tlsservd_enable="NO" # Run rpc.tlsservd needed for NFS-over-TLS nfsd 406tlsservd_flags="" # Flags for rpc.tlsservd 407 408### Network Time Services options: ### 409ntpdate_enable="NO" # Run ntpdate to sync time on boot (or NO). 410ntpdate_program="/usr/sbin/ntpdate" # path to ntpdate, if you want a different one. 411ntpdate_flags="-b" # Flags to ntpdate (if enabled). 412ntpdate_config="/etc/ntp.conf" # ntpdate(8) configuration file 413ntpdate_hosts="" # Whitespace-separated list of ntpdate(8) servers. 414ntpd_enable="NO" # Run ntpd Network Time Protocol (or NO). 415ntpd_program="/usr/sbin/ntpd" # path to ntpd, if you want a different one. 416ntpd_config="/etc/ntp.conf" # ntpd(8) configuration file 417ntpd_sync_on_start="NO" # Sync time on ntpd startup, even if offset is high 418ntpd_flags="" # Additional flags to ntpd 419ntp_src_leapfile="/etc/ntp/leap-seconds" 420 # Initial source for ntpd leapfile 421ntp_db_leapfile="/var/db/ntpd.leap-seconds.list" 422 # Working copy (updated weekly) leapfile 423ntp_leapfile_sources="https://www.ietf.org/timezones/data/leap-seconds.list" 424 # Source from which to fetch leapfile 425ntp_leapfile_fetch_opts="-mq" # Options to use for ntp leapfile fetch, 426 # e.g. --no-verify-peer 427ntp_leapfile_expiry_days=30 # Check for new leapfile 30 days prior to 428 # expiry. 429ntp_leapfile_fetch_verbose="NO" # Be verbose during NTP leapfile fetch 430 431# Network Information Services (NIS) options: All need rpcbind_enable="YES" ### 432nis_client_enable="NO" # We're an NIS client (or NO). 433nis_client_flags="" # Flags to ypbind (if enabled). 434nis_ypset_enable="NO" # Run ypset at boot time (or NO). 435nis_ypset_flags="" # Flags to ypset (if enabled). 436nis_server_enable="NO" # We're an NIS server (or NO). 437nis_server_flags="" # Flags to ypserv (if enabled). 438nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO). 439nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled). 440nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO). 441nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled). 442nis_ypldap_enable="NO" # Run ypldap at boot time (or NO). 443nis_ypldap_flags="" # Flags to ypldap (if enabled). 444 445### SNMP daemon ### 446# Be sure to understand the security implications of running SNMP v1/v2 447# in your network. 448bsnmpd_enable="NO" # Run the SNMP daemon (or NO). 449bsnmpd_flags="" # Flags for bsnmpd. 450 451### Network routing options: ### 452defaultrouter="NO" # Set to default gateway (or NO). 453#defaultrouter_fibN="192.0.2.1" # Use this form to set a gateway for FIB N 454static_arp_pairs="" # Set to static ARP list (or leave empty). 455static_ndp_pairs="" # Set to static NDP list (or leave empty). 456static_routes="" # Set to static route list (or leave empty). 457gateway_enable="NO" # Set to YES if this host will be a gateway. 458routed_enable="NO" # Set to YES to enable a routing daemon. 459routed_program="/sbin/routed" # Name of routing daemon to use if enabled. 460routed_flags="-q" # Flags for routing daemon. 461arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL. 462forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES") 463accept_sourceroute="NO" # accept source routed packets to us 464 465### Bluetooth ### 466hcsecd_enable="NO" # Enable hcsecd(8) (or NO) 467hcsecd_config="/etc/bluetooth/hcsecd.conf" # hcsecd(8) configuration file 468 469sdpd_enable="NO" # Enable sdpd(8) (or NO) 470sdpd_control="/var/run/sdp" # sdpd(8) control socket 471sdpd_groupname="nobody" # set spdp(8) user/group to run as after 472sdpd_username="nobody" # it initializes 473 474bthidd_enable="NO" # Enable bthidd(8) (or NO) 475bthidd_config="/etc/bluetooth/bthidd.conf" # bthidd(8) configuration file 476bthidd_hids="/var/db/bthidd.hids" # bthidd(8) known HID devices file 477bthidd_evdev_support="AUTO" # AUTO depends on EVDEV_SUPPORT kernel option 478 479rfcomm_pppd_server_enable="NO" # Enable rfcomm_pppd(8) in server mode (or NO) 480rfcomm_pppd_server_profile="one two" # Profile to use from /etc/ppp/ppp.conf 481# 482#rfcomm_pppd_server_one_bdaddr="" # Override local bdaddr for 'one' 483rfcomm_pppd_server_one_channel="1" # Override local channel for 'one' 484#rfcomm_pppd_server_one_register_sp="NO" # Override SP and DUN register 485#rfcomm_pppd_server_one_register_dun="NO" # for 'one' 486# 487#rfcomm_pppd_server_two_bdaddr="" # Override local bdaddr for 'two' 488rfcomm_pppd_server_two_channel="3" # Override local channel for 'two' 489#rfcomm_pppd_server_two_register_sp="NO" # Override SP and DUN register 490#rfcomm_pppd_server_two_register_dun="NO" # for 'two' 491 492ubthidhci_enable="NO" # Switch an USB BT controller present on 493#ubthidhci_busnum="3" # bus 3 and addr 2 from HID mode to HCI mode. 494#ubthidhci_addr="2" # Check usbconfig list to find the correct 495 # numbers for your system. 496 497### Network link/usability verification options 498netwait_enable="NO" # Enable rc.d/netwait (or NO) 499#netwait_ip="" # Wait for ping response from any IP in this list. 500netwait_timeout="60" # Total number of seconds to perform pings. 501#netwait_if="" # Wait for active link on each intf in this list. 502netwait_if_timeout="30" # Total number of seconds to monitor link state. 503 504### Miscellaneous network options: ### 505icmp_bmcastecho="NO" # respond to broadcast ping packets 506 507### IPv6 options: ### 508ipv6_network_interfaces="auto" # List of IPv6 network interfaces 509 # (or "auto" or "none"). 510ipv6_activate_all_interfaces="NO" # If NO, interfaces which have no 511 # corresponding $ifconfig_IF_ipv6 is 512 # marked as IFDISABLED for security 513 # reason. 514ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO). 515#ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068) 516#ipv6_defaultrouter_fibN="2001:db8::" # Use this form to set a gateway for FIB N 517ipv6_static_routes="" # Set to static route list (or leave empty). 518#ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64 519 # route toward loopback interface. 520#ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1" 521ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway. 522ipv6_cpe_wanif="NO" # Set to the upstream interface name if this 523 # node will work as a router to forward IPv6 524 # packets not explicitly addressed to itself. 525ipv6_privacy="NO" # Use privacy address on RA-receiving IFs 526 # (RFC 4941) 527 528route6d_enable="NO" # Set to YES to enable an IPv6 routing daemon. 529route6d_program="/usr/sbin/route6d" # Name of IPv6 routing daemon. 530route6d_flags="" # Flags to IPv6 routing daemon. 531#route6d_flags="-l" # Example for route6d with only IPv6 site local 532 # addrs. 533#route6d_flags="-q" # If you want to run a routing daemon on an end 534 # node, you should stop advertisement. 535#ipv6_network_interfaces="em0 em1" # Examples for router 536 # or static configuration for end node. 537 # Choose correct prefix value. 538#ipv6_prefix_em0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr. 539#ipv6_prefix_em1="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr. 540ipv6_default_interface="NO" # Default output interface for scoped addrs. 541 # This works only with 542 # ipv6_gateway_enable="NO". 543rtsol_flags="-i" # Flags to IPv6 router solicitation. 544rtsold_enable="NO" # Set to YES to enable an IPv6 router 545 # solicitation daemon. 546rtsold_flags="-a -i" # Flags to an IPv6 router solicitation 547 # daemon. 548rtadvd_enable="NO" # Set to YES to enable an IPv6 router 549 # advertisement daemon. If set to YES, 550 # this router becomes a possible candidate 551 # IPv6 default router for local subnets. 552rtadvd_interfaces="" # Interfaces rtadvd sends RA packets. 553stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4 554 # tunneling interface. Specify this entry 555 # to enable 6to4 interface. 556stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr, 557 # to limit peer addr range. Effective value 558 # is 0-31. 559stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0. 560 # If you like, you can set "AUTO" for this. 561stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0 562ipv6_ipv4mapping="NO" # Set to "YES" to enable IPv4 mapped IPv6 addr 563 # communication. (like ::ffff:a.b.c.d) 564ip6addrctl_enable="YES" # Set to YES to enable default address selection 565ip6addrctl_verbose="NO" # Set to YES to enable verbose configuration messages 566ip6addrctl_policy="AUTO" # A pre-defined address selection policy 567 # (ipv4_prefer, ipv6_prefer, or AUTO) 568 569############################################################## 570### System console options ################################# 571############################################################## 572 573keyboard="" # keyboard device to use (default /dev/kbd0). 574keymap="NO" # keymap in /usr/share/{syscons,vt}/keymaps/* (or NO). 575keyrate="NO" # keyboard rate to: slow, normal, fast (or NO). 576keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable. 577keychange="NO" # function keys default values (or NO). 578cursor="NO" # cursor type {normal|blink|destructive} (or NO). 579scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO). 580font8x16="NO" # font 8x16 from /usr/share/{syscons,vt}/fonts/* (or NO). 581font8x14="NO" # font 8x14 from /usr/share/{syscons,vt}/fonts/* (or NO). 582font8x8="NO" # font 8x8 from /usr/share/{syscons,vt}/fonts/* (or NO). 583blanktime="300" # blank time (in seconds) or "NO" to turn it off. 584saver="NO" # screen saver: Uses /boot/kernel/${saver}_saver.ko 585moused_nondefault_enable="YES" # Treat non-default mice as enabled unless 586 # specifically overridden in rc.conf(5). 587moused_enable="NO" # Run the mouse daemon. 588moused_type="auto" # See man page for rc.conf(5) for available settings. 589moused_port="/dev/psm0" # Set to your mouse port. 590moused_flags="" # Any additional flags to moused. 591mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your 592 # language code table, specify alternative range 593 # start like mousechar_start=3, see vidcontrol(1) 594allscreens_flags="" # Set this vidcontrol mode for all virtual screens 595allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens 596 597############################################################## 598### Mail Transfer Agent (MTA) options ###################### 599############################################################## 600 601# Settings for /etc/rc.d/sendmail: 602sendmail_enable="NONE" # Run the sendmail inbound daemon (YES/NO/NONE). 603 # If NONE, don't start any sendmail processes. 604sendmail_pidfile="/var/run/sendmail.pid" # sendmail pid file 605sendmail_procname="/usr/sbin/sendmail" # sendmail process name 606sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server) 607sendmail_cert_create="YES" # Create a server certificate if none (YES/NO) 608#sendmail_cert_cn="CN" # CN of the generate certificate 609sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission 610sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost" 611 # Flags for localhost-only MTA 612sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO). 613sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only) 614sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO). 615sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m" 616 # Flags for sendmail_msp_queue daemon. 617sendmail_rebuild_aliases="NO" # Run newaliases if necessary (YES/NO). 618 619 620############################################################## 621### Miscellaneous administrative options ################### 622############################################################## 623 624auditd_enable="NO" # Run the audit daemon. 625auditd_program="/usr/sbin/auditd" # Path to the audit daemon. 626auditd_flags="" # Which options to pass to the audit daemon. 627auditdistd_enable="NO" # Run the audit daemon. 628auditdistd_program="/usr/sbin/auditdistd" # Path to the auditdistd daemon. 629auditdistd_flags="" # Which options to pass to the auditdistd daemon. 630cron_enable="YES" # Run the periodic job daemon. 631cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled). 632cron_dst="YES" # Handle DST transitions intelligently (YES/NO) 633cron_flags="" # Which options to pass to the cron daemon. 634cfumass_enable="NO" # Create default LUN for cfumass(4). 635cfumass_dir="/var/cfumass" # File to LUN's contents. 636cfumass_image="/var/tmp/cfumass.img" # LUN's backing file path. 637lpd_enable="NO" # Run the line printer daemon. 638lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one. 639lpd_flags="" # Flags to lpd (if enabled). 640nscd_enable="NO" # Run the nsswitch caching daemon. 641chkprintcap_enable="NO" # Run chkprintcap(8) before running lpd. 642chkprintcap_flags="-d" # Create missing directories by default. 643dumpdev="AUTO" # Device to crashdump to (device name, AUTO, or NO). 644dumpon_flags="" # Options to pass to dumpon(8), followed by dumpdev. 645dumpdir="/var/crash" # Directory where crash dumps are to be stored 646savecore_enable="YES" # Extract core from dump devices if any 647savecore_flags="-m 10" # Used if dumpdev is enabled above, and present. 648 # By default, only the 10 most recent kernel dumps 649 # are saved. 650service_delete_empty="NO" # Have 'service delete' remove empty rc.conf.d files. 651crashinfo_enable="YES" # Automatically generate crash dump summary. 652crashinfo_program="/usr/sbin/crashinfo" # Script to generate crash dump summary. 653quota_enable="NO" # turn on quotas on startup (or NO). 654check_quotas="YES" # Check quotas on startup (or NO). 655quotaon_flags="-a" # Turn quotas on for all file systems (if enabled) 656quotaoff_flags="-a" # Turn quotas off for all file systems at shutdown 657quotacheck_flags="-a" # Check all file system quotas (if enabled) 658accounting_enable="NO" # Turn on process accounting (or NO). 659firstboot_sentinel="/firstboot" # Scripts with "firstboot" keyword are run if 660 # this file exists. Should be on a R/W filesystem so 661 # the file can be deleted after the boot completes. 662sysvipc_enable="NO" # Load System V IPC primitives at startup (or NO). 663linux_enable="NO" # Linux binary compatibility loaded at startup (or NO). 664linux_mounts_enable="YES" # If linux_enable is set to YES, mount Linux-specific 665 # filesystems at startup. 666clear_tmp_enable="NO" # Clear /tmp at startup. 667clear_tmp_X="YES" # Clear and recreate X11-related directories in /tmp 668ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks 669ldconfig_paths="/usr/lib/compat ${_localbase}/lib ${_localbase}/lib/compat/pkg" 670 # shared library search paths 671ldconfig32_paths="/usr/lib32 /usr/lib32/compat" 672 # 32-bit compatibility shared library search paths 673ldconfig_local_dirs="${_localbase}/libdata/ldconfig" 674 # Local directories with ldconfig configuration files. 675ldconfig_local32_dirs="${_localbase}/libdata/ldconfig32" 676 # Local directories with 32-bit compatibility ldconfig 677 # configuration files. 678kern_securelevel_enable="NO" # kernel security level (see security(7)) 679kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure 680 # Note that setting securelevel to 0 will result 681 # in the system booting with securelevel set to 1, as 682 # init(8) will raise the level when rc(8) completes. 683update_motd="YES" # update version info in /etc/motd (or NO) 684entropy_boot_file="/boot/entropy" # Set to NO to disable very early 685 # (used at early boot time) entropy caching through reboots. 686entropy_file="/entropy" # Set to NO to disable late (used when going multi-user) 687 # entropy through reboots. 688 # /var/db/entropy-file is preferred if / is not avail. 689entropy_dir="/var/db/entropy" # Set to NO to disable caching entropy via cron. 690entropy_save_sz="4096" # Size of the entropy cache files. 691entropy_save_num="8" # Number of entropy cache files to save. 692harvest_mask="511" # Entropy device harvests all but the very invasive sources. 693 # (See 'sysctl kern.random.harvest' and random(4)) 694osrelease_enable="YES" # Update /var/run/os-release on boot (or NO). 695osrelease_file="/var/run/os-release" # File to update for os-release. 696osrelease_perms="444" # Default permission for os-release file. 697machine_id_enable="YES" # Create /var/db/machine-id on boot if missing (or NO). 698machine_id_file="/var/db/machine-id" # File to update for machine-id. 699machine_id_perms="444" # Default permissions for machine-id file. 700dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot 701watchdogd_enable="NO" # Start the software watchdog daemon 702watchdogd_flags="" # Flags to watchdogd (if enabled) 703watchdogd_timeout="" # watchdogd timeout, overrides -t in watchdogd_flags 704watchdogd_shutdown_timeout="" # Timeout to use after watchdogd is stopped. 705 # Has effect only for system shutdown. 706 # Overrides -x in watchdogd_flags. 707devfs_rulesets="/etc/defaults/devfs.rules /etc/devfs.rules" # Files containing 708 # devfs(8) rules. 709devfs_system_ruleset="" # The name (NOT number) of a ruleset to apply to /dev 710devfs_set_rulesets="" # A list of /mount/dev=ruleset_name settings to 711 # apply (must be mounted already, i.e. fstab(5)) 712devfs_load_rulesets="YES" # Enable to always load the default rulesets 713performance_cx_lowest="NONE" # Online CPU idle state 714performance_cpu_freq="NONE" # Online CPU frequency 715economy_cx_lowest="Cmax" # Offline CPU idle state 716economy_cpu_freq="NONE" # Offline CPU frequency 717virecover_enable="YES" # Perform housekeeping for the vi(1) editor 718ugidfw_enable="NO" # Load mac_bsdextended(4) rules on boot 719bsdextended_script="/etc/rc.bsdextended" # Default mac_bsdextended(4) 720 # ruleset file. 721newsyslog_enable="YES" # Run newsyslog at startup. 722newsyslog_flags="-CN" # Newsyslog flags to create marked files 723mixer_enable="YES" # Run the sound mixer. 724opensm_enable="NO" # Opensm(8) for infiniband devices defaults to off 725 726# rctl(8) requires kernel options RACCT and RCTL 727rctl_enable="YES" # Load rctl(8) rules on boot 728rctl_rules="/etc/rctl.conf" # rctl(8) ruleset. See rctl.conf(5). 729 730iovctl_files="" # Config files for iovctl(8) 731 732############################################################## 733### Jail Configuration (see rc.conf(5) manual page) ########## 734############################################################## 735jail_enable="NO" # Set to NO to disable starting of any jails 736jail_conf="/etc/jail.conf" # Configuration file for jail(8) 737jail_confwarn="YES" # Prevent warning about obsolete per-jail configuration 738jail_parallel_start="NO" # Start jails in the background 739jail_list="" # Space separated list of names of jails 740jail_reverse_stop="NO" # Stop jails in reverse order 741 742############################################################## 743### Define source_rc_confs, the mechanism used by /etc/rc.* ## 744### scripts to source rc_conf_files overrides safely. ## 745############################################################## 746 747if [ -z "${source_rc_confs_defined}" ]; then 748 source_rc_confs_defined=yes 749 source_rc_confs() { 750 local i sourced_files 751 for i in ${rc_conf_files}; do 752 case ${sourced_files} in 753 *:$i:*) 754 ;; 755 *) 756 sourced_files="${sourced_files}:$i:" 757 if [ -r $i ]; then 758 . $i 759 fi 760 ;; 761 esac 762 done 763 # Re-do process to pick up [possibly] redefined $rc_conf_files 764 for i in ${rc_conf_files}; do 765 case ${sourced_files} in 766 *:$i:*) 767 ;; 768 *) 769 sourced_files="${sourced_files}:$i:" 770 if [ -r $i ]; then 771 . $i 772 fi 773 ;; 774 esac 775 done 776 } 777fi 778 779# Allow vendors to override FreeBSD defaults in /etc/default/rc.conf 780# without the need to carefully manage /etc/rc.conf. 781if [ -r /etc/defaults/vendor.conf ]; then 782 . /etc/defaults/vendor.conf 783fi 784