1# Most of the table entries here are just copies of the old getty table, 2# it is by no means certain, or even likely, that any of them are optimal 3# for any purpose whatever. Nor is it likely that more than a couple are 4# even correct. 5# 6# The default gettytab entry, used to set defaults for all other 7# entries, and in cases where getty is called with no table name. 8# 9# cb, ce and ck are desirable on most crt's. The non-crt entries need to 10# be changed to turn them off (:cb@:ce@:ck@:). 11# 12# lc should always be on; it's a remainder of some stone age when there 13# have been terminals around not being able of handling lower-case 14# characters. Those terminals aren't supported any longer, but getty is 15# `smart' about them by default. 16# 17# Parity defaults to even, but the Pc entry and all the `std' entries 18# specify no parity. The different parities are: 19# (none): same as ep for getty. login will use terminal as is. 20# ep: getty will use raw mode (cs8 -parenb) (unless rw is set) and 21# fake parity. login will use even parity (cs7 parenb -parodd). 22# op: same as ep except odd parity (cs7 parenb parodd) for login. 23# getty will fake odd parity as well. 24# ap: same as ep except -inpck instead of inpck for login. 25# ap overrides op and ep. 26# np: 1. don't fake parity in getty. The fake parity garbles 27# characters on non-terminals (like pccons) that don't 28# support parity. It would probably better for getty not to 29# try to fake parity. It could just use cbreak mode so as 30# not to force cs8 and let the hardware handle the parity. 31# login has to be rely on the hardware anyway. 32# 2. set cs8 -parenb -istrip -inpck. 33# ep:op: same as ap. 34# 35default:\ 36 :cb:ce:ck:lc:fd#1000:im=\r\n%s/%m (%h) (%t)\r\n\r\n:sp#1200:\ 37 :if=/etc/issue: 38 39# 40# Fixed speed entries 41# 42# The "std.NNN" names are known to the special case 43# portselector code in getty, however they can 44# be assigned to any table desired. 45# The "NNN-baud" names are known to the special case 46# autobaud code in getty, and likewise can 47# be assigned to any table desired (hopefully the same speed). 48# 49std:\ 50 :np:sp#0: 51a|std.110|110-baud:\ 52 :np:nd#1:cd#1:uc:sp#110: 53b|std.134|134.5-baud:\ 54 :np:nd#1:cd#2:ff#1:td#1:sp#134:ht:nl: 551|std.150|150-baud:\ 56 :np:nd#1:cd#2:td#1:fd#1:sp#150:ht:nl:lm=\E\72\6\6\17login\72 : 57c|std.300|300-baud:\ 58 :np:nd#1:cd#1:sp#300: 59d|std.600|600-baud:\ 60 :np:nd#1:cd#1:sp#600: 61f|std.1200|1200-baud:\ 62 :np:fd#1:sp#1200: 636|std.2400|2400-baud:\ 64 :np:sp#2400: 657|std.4800|4800-baud:\ 66 :np:sp#4800: 672|std.9600|9600-baud:\ 68 :np:sp#9600: 69g|std.19200|19200-baud:\ 70 :np:sp#19200: 71std.38400|38400-baud:\ 72 :np:sp#38400: 73std.57600|57600-baud:\ 74 :np:sp#57600: 75std.115200|115200-baud:\ 76 :np:sp#115200: 77std.230400|230400-baud:\ 78 :np:sp#230400: 79 80# 81# Entry specifying explicit device settings. See termios(4) and 82# /usr/include/termios.h, too. The entry forces the tty into 83# CLOCAL mode (so no DCD is required), and uses Xon/Xoff flow control. 84# 85# cflags: CLOCAL | HUPCL | CREAD | CS8 86# oflags: OPOST | ONLCR | OXTABS 87# iflags: IXOFF | IXON | ICRNL | IGNPAR 88# lflags: IEXTEN | ICANON | ISIG | ECHOCTL | ECHO | ECHOK | ECHOE | ECHOKE 89# 90# The `0' flags don't have input enabled. The `1' flags don't echo. 91# (Echoing is done inside getty itself.) 92# 93local.9600|CLOCAL tty @ 9600 Bd:\ 94 :c0#0x0000c300:c1#0x0000cb00:c2#0x0000cb00:\ 95 :o0#0x00000007:o1#0x00000002:o2#0x00000007:\ 96 :i0#0x00000704:i1#0x00000000:i2#0x00000704:\ 97 :l0#0x000005cf:l1#0x00000000:l2#0x000005cf:\ 98 :sp#9600:np: 99 100# 101# Dial in rotary tables, speed selection via 'break' 102# 1030|d300|Dial-300:\ 104 :nx=d1200:cd#2:sp#300: 105d1200|Dial-1200:\ 106 :nx=d150:fd#1:sp#1200: 107d150|Dial-150:\ 108 :nx=d110:lm@:tc=150-baud: 109d110|Dial-110:\ 110 :nx=d300:tc=300-baud: 111 112# 113# Fast dialup terminals, 2400/1200/300 rotary (can start either way) 114# 115D2400|d2400|Fast-Dial-2400:\ 116 :nx=D1200:tc=2400-baud: 1173|D1200|Fast-Dial-1200:\ 118 :nx=D300:tc=1200-baud: 1195|D300|Fast-Dial-300:\ 120 :nx=D2400:tc=300-baud: 121 122# 123#telebit (19200) 124# 125t19200:\ 126 :nx=t2400:tc=19200-baud: 127t2400:\ 128 :nx=t1200:tc=2400-baud: 129t1200:\ 130 :nx=t19200:tc=1200-baud: 131 132# 133#telebit (9600) 134# 135t9600:\ 136 :nx=t2400a:tc=9600-baud: 137t2400a:\ 138 :nx=t1200a:tc=2400-baud: 139t1200a:\ 140 :nx=t9600:tc=1200-baud: 141 142# 143# Odd special case terminals 144# 145-|tty33|asr33|Pity the poor user of this beast:\ 146 :tc=110-baud: 147 1484|Console|Console Decwriter II:\ 149 :nd@:cd@:rw:tc=300-baud: 150 151e|Console-1200|Console Decwriter III:\ 152 :fd@:nd@:cd@:rw:tc=1200-baud: 153 154i|Interdata console:\ 155 :uc:sp#0: 156 157l|lsi chess terminal:\ 158 :sp#300: 159 160X|Xwindow|X window system:\ 161 :fd@:nd@:cd@:rw:sp#9600: 162 163P|Pc|Pc console:\ 164 :ht:np:sp#9600: 165 166# 167# Weirdo special case for fast crt's with hardcopy devices 168# 1698|T9600|CRT with hardcopy:\ 170 :nx=T300:tc=9600-baud: 1719|T300|CRT with hardcopy (300):\ 172 :nx=T9600:tc=300-baud: 173 174# 175# Plugboard, and misc other terminals 176# 177plug-9600|Plugboard-9600:\ 178 :pf#1:tc=9600-baud: 179p|P9600|Plugboard-9600-rotary:\ 180 :pf#1:nx=P300:tc=9600-baud: 181q|P300|Plugboard-300:\ 182 :pf#1:nx=P1200:tc=300-baud: 183r|P1200|Plugboard-1200:\ 184 :pf#1:nx=P9600:tc=1200-baud: 185 186# 187# XXXX Port selector 188# 189s|DSW|Port Selector:\ 190 :ps:sp#2400: 191 192# 193# Auto-baud speed detect entry for Micom 600. 194# Special code in getty will switch this out 195# to one of the NNN-baud entries. 196# 197A|Auto-baud:\ 198 :ab:sp#2400:f0#040: 199 200# 201# autologin - automatically log in as root 202# 203 204autologin|al.9600:\ 205 :al=root:tc=std.9600: 206al.19200:\ 207 :al=root:tc=std.19200: 208al.38400:\ 209 :al=root:tc=std.38400: 210al.57600:\ 211 :al=root:tc=std.57600: 212al.115200:\ 213 :al=root:tc=std.115200: 214al.230400:\ 215 :al=root:tc=std.230400: 216al.Pc:\ 217 :al=root:tc=Pc 218 219# 220# Entries for 3-wire serial terminals. These don't supply carrier, so 221# clocal needs to be set, and crtscts needs to be unset. 222# 2233wire:\ 224 :np:nc:sp#0: 2253wire.9600|9600-3wire:\ 226 :np:nc:sp#9600: 2273wire.19200|19200-3wire:\ 228 :np:nc:sp#19200: 2293wire.38400|38400-3wire:\ 230 :np:nc:sp#38400: 2313wire.57600|57600-3wire:\ 232 :np:nc:sp#57600: 2333wire.115200|115200-3wire:\ 234 :np:nc:sp#115200: 2353wire.230400|230400-3wire:\ 236 :np:nc:sp#230400: 237