1.\" Copyright (c) 1983, 1991, 1993 2.\" The Regents of the University of California. All rights reserved. 3.\" 4.\" Redistribution and use in source and binary forms, with or without 5.\" modification, are permitted provided that the following conditions 6.\" are met: 7.\" 1. Redistributions of source code must retain the above copyright 8.\" notice, this list of conditions and the following disclaimer. 9.\" 2. Redistributions in binary form must reproduce the above copyright 10.\" notice, this list of conditions and the following disclaimer in the 11.\" documentation and/or other materials provided with the distribution. 12.\" 3. All advertising materials mentioning features or use of this software 13.\" must display the following acknowledgement: 14.\" This product includes software developed by the University of 15.\" California, Berkeley and its contributors. 16.\" 4. Neither the name of the University nor the names of its contributors 17.\" may be used to endorse or promote products derived from this software 18.\" without specific prior written permission. 19.\" 20.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 21.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 22.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 23.\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 24.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 25.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 26.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 27.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 28.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 29.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 30.\" SUCH DAMAGE. 31.\" 32.\" from: @(#)gettytab.5 8.4 (Berkeley) 4/19/94 33.\" $Id: gettytab.5,v 1.17 1998/05/04 02:37:24 steve Exp $ 34.\" " 35.Dd April 19, 1994 36.Dt GETTYTAB 5 37.Os BSD 4.2 38.\" turn off hyphenation 39.hym 999 40.Sh NAME 41.Nm gettytab 42.Nd terminal configuration data base 43.Sh SYNOPSIS 44.Nm gettytab 45.Sh DESCRIPTION 46The 47.Nm 48file 49is a simplified version of the 50.Xr termcap 5 51data base 52used to describe terminal lines. 53The initial terminal login process 54.Xr getty 8 55accesses the 56.Nm 57file each time it starts, allowing simpler 58reconfiguration of terminal characteristics. 59Each entry in the data base 60is used to describe one class of terminals. 61.Pp 62There is a default terminal class, 63.Em default , 64that is used to set global defaults for all other classes. 65(That is, the 66.Em default 67entry is read, then the entry for the class required 68is used to override particular settings.) 69.Sh CAPABILITIES 70Refer to 71.Xr termcap 5 72for a description of the file layout. 73The 74.Em default 75column below lists defaults obtained if there is 76no entry in the table obtained, nor one in the special 77.Em default 78table. 79.Bl -column Namexx /usr/bin/login Default 80.It Sy Name Type Default Description 81.It "ac str unused expect-send chat script for modem answer" 82.It "ap bool false terminal uses any parity" 83.It "bk str 0377 alternate end of line character (input break)" 84.It "c0 num unused tty control flags to write messages" 85.It "c1 num unused tty control flags to read login name" 86.It "c2 num unused tty control flags to leave terminal as" 87.It "ce bool false use crt erase algorithm" 88.It "ck bool false use crt kill algorithm" 89.It "cl str" Ta Dv NULL Ta 90.No "screen clear sequence" 91.It "co bool false console - add" 92.Ql \en 93after login prompt 94.It "ct num 10 chat timeout for ac/ic scripts" 95.It "dc num 0 chat debug bitmask" 96.It "de num 0 delay secs and flush input before writing first prompt" 97.It "ds str" Ta So Li ^Y Sc Ta 98.No "delayed suspend character" 99.It "dx bool false set" 100.Dv DECCTLQ 101.It "ec bool false leave echo" 102.Tn OFF 103.It "ep bool false terminal uses even parity" 104.It "er str" Ta So Li ^? Sc Ta 105.No "erase character" 106.It "et str" Ta So Li ^D Sc Ta 107.No "end of text" 108.Pq Dv EOF 109character 110.It "ev str" Ta Dv NULL Ta 111.No "initial environment" 112.It "f0 num unused tty mode flags to write messages" 113.It "f1 num unused tty mode flags to read login name" 114.It "f2 num unused tty mode flags to leave terminal as" 115.It "fl str" Ta So Li ^O Sc Ta 116.No "output flush character" 117.It "hc bool false do" 118.Tn NOT 119hangup line on last close 120.It "he str" Ta Dv NULL Ta 121.No "hostname editing string" 122.It "hn str hostname hostname" 123.It "ht bool false terminal has real tabs" 124.It "hw bool false do cts/rts hardware flow control" 125.It "i0 num unused tty input flags to write messages" 126.It "i1 num unused tty input flags to read login name" 127.It "i2 num unused tty input flags to leave terminal as" 128.It "ic str unused expect-send chat script for modem initialization" 129.It "if str unused display named file before prompt, like /etc/issue" 130.It "ig bool false ignore garbage characters in login name" 131.It "im str" Ta Dv NULL Ta 132.No "initial (banner) message" 133.It "in str" Ta So Li ^C Sc Ta 134.No "interrupt character" 135.It "is num unused input speed" 136.It "kl str" Ta So Li ^U Sc Ta 137.No "kill character" 138.It "l0 num unused tty local flags to write messages" 139.It "l1 num unused tty local flags to read login name" 140.It "l2 num unused tty local flags to leave terminal as" 141.It "lm str login: login prompt" 142.It "ln str" Ta So Li ^V Sc Ta 143.No "``literal next'' character" 144.It "lo str" Ta Pa /usr/bin/login Ta 145.No "program to exec when name obtained" 146.It "mb bool false do flow control based on carrier" 147.It "nl bool false terminal has (or might have) a newline character" 148.It "np bool false terminal uses no parity (i.e. 8-bit characters)" 149.It "nx str default next table (for auto speed selection)" 150.It "o0 num unused tty output flags to write messages" 151.It "o1 num unused tty output flags to read login name" 152.It "o2 num unused tty output flags to leave terminal as" 153.It "op bool false terminal uses odd parity" 154.It "os num unused output speed" 155.It "pc str" Ta So Li \e0 Sc Ta 156.No "pad character" 157.It "pe bool false use printer (hard copy) erase algorithm" 158.It "pf num 0 delay" 159between first prompt and following flush (seconds) 160.It "pp str unused PPP authentication program" 161.It "ps bool false line connected to a" 162.Tn MICOM 163port selector 164.It "qu str" Ta So Li \&^\e Sc Ta 165.No "quit character" 166.It "rp str" Ta So Li ^R Sc Ta 167.No "line retype character" 168.It "rt num unused ring timeout when using ac" 169.It "rw bool false do" 170.Tn NOT 171use raw for input, use cbreak 172.It "sp num unused line speed (input and output)" 173.It "su str" Ta So Li ^Z Sc Ta 174.No "suspend character" 175.It "tc str none table continuation" 176.It "to num 0 timeout (seconds)" 177.It "tt str" Ta Dv NULL Ta 178.No "terminal type (for environment)" 179.It "ub bool false do unbuffered output (of prompts etc)" 180.It "we str" Ta So Li ^W Sc Ta 181.No "word erase character" 182.It xc bool false do 183.Tn NOT 184echo control chars as 185.Ql ^X 186.It "xf str" Ta So Li ^S Sc Ta Dv XOFF 187(stop output) character 188.It "xn str" Ta So Li ^Q Sc Ta Dv XON 189(start output) character 190.It "Lo str C the locale name used for \&%d in the banner message" 191.El 192.Pp 193The following capabilities are no longer supported by 194.Xr getty 8 Ns : 195.Bl -column Namexx /usr/bin/login Default 196.It "bd num 0 backspace delay" 197.It "cb bool false use crt backspace mode" 198.It "cd num 0 carriage-return delay" 199.It "fd num 0 form-feed (vertical motion) delay" 200.It "lc bool false terminal has lower case" 201.It "nd num 0 newline (line-feed) delay" 202.It "uc bool false terminal is known upper case only" 203.El 204.Pp 205If no line speed is specified, speed will not be altered 206from that which prevails when getty is entered. 207Specifying an input or output speed will override 208line speed for stated direction only. 209.Pp 210Terminal modes to be used for the output of the message, 211for input of the login name, 212and to leave the terminal set as upon completion, 213are derived from the boolean flags specified. 214If the derivation should prove inadequate, 215any (or all) of these three may be overridden 216with one of the 217.Em \&c0 , 218.Em \&c1 , 219.Em \&c2 , 220.Em \&i0 , 221.Em \&i1 , 222.Em \&i2 , 223.Em \&l0 , 224.Em \&l1 , 225.Em \&l2 , 226.Em \&o0 , 227.Em \&o1 , 228or 229.Em \&o2 230numeric specifications, which can be used to specify 231(usually in octal, with a leading '0') 232the exact values of the flags. 233These flags correspond to the termios 234.Em c_cflag , 235.Em c_iflag , 236.Em c_lflag , 237and 238.Em c_oflag 239fields, respectively. Each these sets must be completely specified to be 240effective. 241The 242.Em \&f0 , 243.Em \&f1 , 244and 245.Em \&f2 246are excepted for backwards compatibility with a previous incarnation of 247the TTY sub-system. In these flags the bottom 16 bits of the (32 bits) 248value contain the sgttyb 249.Em sg_flags 250field, while the top 16 bits represent the local mode word. 251.Pp 252Should 253.Xr getty 8 254receive a null character 255(presumed to indicate a line break) 256it will restart using the table indicated by the 257.Em nx 258entry. If there is none, it will re-use its original table. 259.Pp 260Delays are specified in milliseconds, the nearest possible 261delay available in the tty driver will be used. 262Should greater certainty be desired, delays 263with values 0, 1, 2, and 3 are interpreted as 264choosing that particular delay algorithm from the driver. 265.Pp 266The 267.Em \&cl 268screen clear string may be preceded by a (decimal) number 269of milliseconds of delay required (a la termcap). 270This delay is simulated by repeated use of the pad character 271.Em \&pc . 272.Pp 273The initial message, login message, and initial file; 274.Em \&im , 275.Em \&lm 276and 277.Em \&if 278may include any of the following character sequences, which expand to 279information about the environment in which 280.Xr getty 8 281is running. 282.Pp 283.Bl -tag -offset indent -width \&%xxxxxxxxxxxxxx 284.It \&%d 285The current date and time in the locale's representation as of the 286.Em \&Lo 287string 288(the \&%+ format of 289.Xr strftime 3 ). 290.It \&%h 291The hostname of the machine, which is normally obtained from the 292system using 293.Xr gethostname 3 , 294but may also be overridden by the 295.Em \&hn 296table entry. 297In either case it may be edited with the 298.Em \&he 299string. 300A '@' in the 301.Em \&he 302string causes one character from the real hostname to 303be copied to the final hostname. 304A '#' in the 305.Em \&he 306string causes the next character of the real hostname 307to be skipped. 308Each character that 309is neither '@' nor '#' is copied into the final hostname. 310Surplus '@' and '#' characters are ignored. 311.It \&%t 312The tty name. 313.It "\&%m, \&%r, \&%s, \&%v" 314The type of machine, release of the operating system, name of the 315operating system, and version of the kernel, respectively, as 316returned by 317.Xr uname 3 . 318.It \&%% 319A 320.Dq % 321character. 322.El 323.Pp 324When getty execs the login process, given 325in the 326.Em \&lo 327string (usually 328.Dq Pa /usr/bin/login ) , 329it will have set 330the environment to include the terminal type, as indicated 331by the 332.Em \&tt 333string (if it exists). 334The 335.Em \&ev 336string, can be used to enter additional data into 337the environment. 338It is a list of comma separated strings, each of which 339will presumably be of the form 340.Em name=value . 341.Pp 342If a non-zero timeout is specified, with 343.Em \&to , 344then getty will exit within the indicated 345number of seconds, either having 346received a login name and passed control 347to 348.Xr login 1 , 349or having received an alarm signal, and exited. 350This may be useful to hangup dial in lines. 351.Pp 352Output from 353.Xr getty 8 354is even parity unless 355.Em \&op 356or 357.Em \&np 358is specified. 359The 360.Em \&op 361string 362may be specified with 363.Em \&ap 364to allow any parity on input, but generate odd parity output. 365Note: this only applies while getty is being run, 366terminal driver limitations prevent a more complete 367implementation. 368.Xr Getty 8 369does not check parity of input characters in 370.Dv RAW 371mode. 372.Pp 373If 374.Em \&pp 375string is specified and a PPP link bring up sequence is recognized, 376getty will invoke the program referenced by the pp option. This 377can be used to handle incoming PPP calls. 378.Pp 379.Nm Getty 380provides some basic intelligent modem handling by providing a chat 381script feature available via two capabilities: 382.Pp 383.Bl -tag -offset indent -width \&xxxxxxxx -compact 384.It ic 385Chat script to initialize modem. 386.It ac 387Chat script to answer a call. 388.El 389.Pp 390A chat script is a set of expect/send string pairs. 391When a chat string starts, 392.Nm getty 393will wait for the first string, and if it finds it, will send the 394second, and so on. 395Strings specified are separated by one or more tabs or spaces. 396Strings may contain standard ascii characters and special 'escapes', 397which consist of a backslash character followed by one or more 398characters which are interpreted as follows: 399.Pp 400.Bl -tag -offset indent -width \&xxxxxxxx -compact 401.It \ea 402bell character. 403.It \eb 404backspace. 405.It \en 406newline. 407.It \ee 408escape. 409.It \ef 410formfeed. 411.It \ep 412half-second pause. 413.It \er 414carriage return. 415.It \eS, \es 416space character. 417.It \et 418tab. 419.It \exNN 420hexadecimal byte value. 421.It \e0NNN 422octal byte value. 423.El 424.Pp 425Note that the 426.Ql \ep 427sequence is only valid for send strings and causes a half-second 428pause between sending the previous and next characters. 429Hexidecimal values are, at most, 2 hex digits long, and octal 430values are a maximum of 3 octal digits. 431.Pp 432The 433.Em \&ic 434chat sequence is used to initialize a modem or similar device. 435A typical example of an init chat script for a modem with a 436hayes compatible command set might look like this: 437.Pp 438.Dl :ic="" ATE0Q0V1\er OK\er ATS0=0\er OK\er: 439.Pp 440This script waits for nothing (which always succeeds), sends 441a sequence to ensure that the modem is in the correct mode 442(suppress command echo, send responses in verbose mode), 443and then disables auto-answer. 444It waits for an "OK" response before it terminates. 445The init sequence is used to check modem responses to ensure that 446the modem is functioning correctly. 447If the init script fails to complete, 448.Nm getty 449considers this to be fatal, and results in an error logged via 450.Xr syslogd 8 , 451and exiting. 452.Pp 453Similarly, an answer chat script is used to manually answer the 454phone in response to (usually) a "RING". 455When run with an answer script, 456.Nm getty 457opens the port in non-blocking mode, clears any extraneous input 458and waits for data on the port. 459As soon as any data is available, the answer chat script is 460started and scanned for a string, and responds according to 461the answer chat script. 462With a hayes compatible modem, this would normally look something 463like: 464.Pp 465.Dl :ac=RING\er ATA\er CONNECT: 466.Pp 467This causes the modem to answer the call via the "ATA" command, 468then scans input for a "CONNECT" string. 469If this is received before a 470.Em \&ct timeout, then a normal login sequence commences. 471.Pp 472The 473.Em \&ct 474capability specifies a timeout for all send and expect strings. 475This timeout is set individually for each expect wait and send 476string and must be at least as long as the time it takes for 477a connection to be established between a remote and local 478modem (usually around 10 seconds). 479.Pp 480In most situations, you will want to flush any additional 481input after the connection has been detected, and the 482.Em \&de 483capability may be used to do that, as well as delay for a 484short time after the connection has been established during 485which all of the connection data has been sent by the modem. 486.Pp 487.Sh SEE ALSO 488.Xr login 1 , 489.Xr gethostname 3 , 490.Xr uname 3 , 491.Xr termcap 5 , 492.Xr getty 8 , 493.Xr telnetd 8 . 494.Sh BUGS 495The special characters (erase, kill, etc.) are reset to system defaults 496by 497.Xr login 1 . 498In 499.Em all 500cases, '#' or '^H' typed in a login name will be treated as 501an erase character, and '@' will be treated as a kill character. 502.Pp 503The delay stuff is a real crock. 504Apart form its general lack of flexibility, some 505of the delay algorithms are not implemented. 506The terminal driver should support sane delay settings. 507.Pp 508The 509.Em \&he 510capability is stupid. 511.Pp 512The 513.Xr termcap 5 514format is horrid, something more rational should 515have been chosen. 516.Sh HISTORY 517The 518.Nm 519file format appeared in 520.Bx 4.2 . 521